Military Engineer Services-MES has published Repair Replacement Maintenance Of Fire Fighting Pump Houses Fire Fighting Network, Dg Set And Connected Items At Residential Area Under Aor Of Age E / M No.I Of Ge ( Utility-Ii ) Visakhapatnam Repair Replacement Maintenance Of Fire Fighting Pump. Submission Date for this Tender is 19-10-2021. Fire Fighting Consumable Tenders in Garrison Engineer Utility-II Visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Oct-2021 | Corrigendum | Technical Bid | 12-10-2021 |
| 2 | 06-Oct-2021 | Corrigendum | BOQ | 12-10-2021 |
| 3 | 12-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-10-2021 |
| Sl. No. | Item Description |
| 1 | Labour only for cleaning/taking out of silt from sewage sumps, clarifier tank, aerator tank, sludge pumps and sludge bed and getting out and depositing out side the Naval Base area complete all as specified and directed by Engineer-in-charge. Note: Dried sludge/silt shall only be measured and paid. The item rate is inclusive of dewatering the water with suitable pump laid over the sludge. |
| 2 | Material and labour for choke clearing of submersible pump at sewage pump house/ STP including dewatering the sewage sump to bottom level by using diesel driven mobile pump set type/ submersible type, lifting submersible pump with delivery main from bracket at bottom of sewage sump of depth 3 mtr to 5 mtr by using pully & chain block up to floor level, removing all debris from pump casing, removing defective "D" clamps etc. inspecting impeller, bearing, by passing under current relay, testing the pump, lowering the pump with delivery main through guide wire rope by chain block, setting the pump to bottom bracket, testing the pump complete all as directed. |
| 3 | Note :- (a) The Job to be completed with in 02 hours from choking of pump. (b) The quoted rate is deemed to be include the Tool & Plants required for lifting, inspection, lowering etc., . (c) All safety measures including lighting, safety shoes, safety glows to be provided by contractor. |
| 4 | M&L for lifting of unserviceable submersible motor / pump from sewage well / raw sump etc., of capacity 12.5 HP of any make (Non Clog type) and rewinding of electric motor with same gauge of super enamelled copper wire including varnishing, baking, drying till to get required megger value, replacement of terminal blocks, bearings on both drive end & non-drive end, re-assembling, testing, commissioningand re-erecting the same back in sump safely complete all as directed by Engineer-in-charge. |
| 5 | All as per SI item No.3 above but clarifier motor of capacity 7.5 HP capacity |
| 6 | All as per SI item No.3 above but clarifier motor of capacity 0.75 HP capacity |
| 7 | Disconnecting the delivery pipe line and electric connections of submersible pump set of capacity of5.0 to 7.5 HP and lifting and removing it from its position along with pipes and fittings carefully with the help of required T&P and transporting the same to the work shop for inspection, repairs and re-assembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered, including cleaning replacing the minor items like packing bolts, nuts washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surface, making the pump and motor fully serviceable including lathework etc., and testing the same for satisfactory operation on its full load and refixing the same in its original position including connecting up of water and electric connections all as specified and directed by Engineer - in - Charge. NOTE :- Spares shall be measured and paid separately under relevant items of BOQ |
| 8 | Supply only the following spares for submersible pump set of 5 to 7.5 HP capacity |
| 9 | Motor bearing bush |
| 10 | Thrust bearing set |
| 11 | impeller |
| 12 | Stage casing |
| 13 | Suction Bush |
| 14 | Pump NRV |
| 15 | Discharge outletbush |
| 16 | Discharge outlet |
| 17 | Middlebush |
| 18 | SS Sleeve |
| 19 | Neck ring stage casing |
| 20 | Sand guard |
| 21 | Oil Sleeve |
| 22 | Disconnecting the delivery pipe line and electric connections of submersible pump set of capacity upto 30 to 60 HP and lifting and removing it from its position along with pipes and fittings carefully with the help of required T&P and transporting the same to the work shop for repair / servicing/ rewindingwith existing gauge super enamelled copper conductor and same No of turns of existing make insulating winding with existing class of insulation varnishing baking up and drying and lowering and refixing the same in its original position including connecting up of water and electric connections including testing andcommissioning complete all as specified. |
| 23 | All as per SI item No.8 above butsubmersible pump set of capacity upto 5 to 10 HP |
| 24 | Disconnectingelectric connections and taking out theMono block pump set of capacity upto 5 to 10 HP and lifting and removing it from its position along with pipes and fittings carefully with the help of required T&P and transporting the same to the work shop for repair / servicing/ rewindingwith existing gauge super enamelled copper conductor and same No of turns of existing make insulating winding with existing class of insulation varnishing baking up and drying and lowering and refixing the same in its original position including connecting up of water and electric connections including testing andcommissioning complete all as specified. |
| 25 | M&L for removing of pumps from the sump for overhauling the pump of capcity 7.5 to 15 HP connected with submersible electric motors including opening the pump/ pump assemblies; re-metalling, grinding and polishing of pump shaft, replacement of DE & NDE bearings and bushes, repairs to impellers, replacement of mechanical oil seal, re-assembling the pump with motor including testing, commissioning etc., and erecting the same in sump completeall as directed by Engineer-in-Charge. |
| 26 | Note: The spares /consumables like seals, grease, M-seal compound etc., shall be supplied by the contractor and rate quoted is deemed to be included for these provisions. The representative of the firm/ contractor may visit the site for assessing the quantum of work under each job here-in-before. |
| 27 | Disconnecting the delivery pipe line and electric connections of submersible pump setlifting and lowering for reuse of any capacity, from its position along with pipes and fittings carefully with the help of required T&P, flushing of existing borewells of size 150 mm dia 150 Mtrs depth with drilling compressor including surging and flushing the bore at a pressure of 7 Kg / Sq cm complete with compressed air and flushing the sand, mud etc from the bore well till discharge of the fresh waterincluding testing of water samples for chemical and bacteriological tests and yield testing for 8 hours complete all as specified and directed . |
| 28 | S & F in repairs flat copper cable, PVC insulated, sheathed un-armoured, flexible cable 1100 volts grade of size 3 core 4 Sq.mm complete for connecting to submersible pump including necessary water proof jointing compound etc. complete all as specified and directed. |
| 29 | Supply and replace Isolator, 4 pole 63 Amps, 415 Volt complete all as specified and directed. |
| 30 | Supply and fixing in repairs SS chain made out of 8 mm dia rod including top and bottom clamps, nut and bolts for securing/ locking of submersible pump set in sewage well complete all as specified and directed. |
| 31 | Supply and fix in repairs 6 mm dia steel wire rope for submersible pump set as guide rope including necessary clamps, nuts, bolts etc. on top and bottom side in required lengths complete all as directed. |
| 32 | Supply and replacement of the following dia high density polythene pipe (HDPE) of pressure rating 6 Kg/ Sqcm laid in trenches including making leak proof joints complete all as specified and directed by Engineer-in-Charge |
| 33 | 25mm dia |
| 34 | 40mm dia |
| 35 | 50mm dia |
| 36 | M/L for pressure testing of existing 300/200/150/100/80 mm DI/MS fire main system, identifying leakages for rectifications including replacement of gland packing of sluice valves, rubber insertion packing, nut ,bolts etc., of flanged joints/ defective flanges etc., complete for making the system leak proof complete complete all as specified and directed by Engr-in- Charge. Note: (a) The rate quoted deemed to be inclusive of T&P such as air compressor for pressure testing etc., (b) Earthwork, DI/MS pipe & specials required for rectiifcation if any shall be measured and paid under relevant schedule items of BOQ. |
| 37 | Supply and replace the following sizes of CI sluice valves PN 1.6 conforming to IS 14846 flanged end with iron wheel head and stainless steel spindle flanged joints including necessary nuts, bolts, and washers etc., complete all as specified and directed by Engineer -in-charge. |
| 38 | 200 mm dia. |
| 39 | 150 mm dia. |
| 40 | 100 mm dia. |
| 41 | 80 mm dia. |
| 42 | Supply and replace the following CI foot valve flanged type with necessary rubber gasket, bolts, nuts and washers complete all specified and directed. |
| 43 | 200 mm dia |
| 44 | 150 mm dia |
| 45 | 100 mm dia |
| 46 | 80 mm dia |
| 47 | Labour only for attending break down of 200/150/100/80 mm dia CI / MS ERW pipeline bursting / cracks and including cleaning / removal of broken pipe pieces of various lengths through gas cutting / manual cutting as per site requirement and including welding works, inserting necessary specials such as pipes, Collar / mechanical Joints etc as per site requirement, testing for leakages of lead joints, testing and necessary dewatering complete all as specified and directed by Engr-in-Charge, for the following sizes:- Note 1 :- The quoted rate is deemed to be include the following:- (i) Arrangement of suitable Pump sets for dewatering at the time of attending break down. (ii) Necessary labour/trade men for attending break down. (iii)Labour element required for fixing MS pipes, specials, fittings etc (iv) Rate for specials, fittings etc. are required to be included in quoted rate. Note 2 :- Earth work and MS pipes will be measured and paid seperately under relevant items. |
| 48 | Supply onlythe following dia CI pipes with spigot and socket ends centrifugally cast , Class "B" |
| 49 | 200 mm dia. |
| 50 | 150 mm dia. |
| 51 | 100 mm dia. |
| 52 | 80 mm dia. |
| 53 | Supply only the following diaMS ERW pipes |
| 54 | 200 mm bore, thickness not less than 6.30mm |
| 55 | 150 mm bore, thickness not less than 5.40mm |
| 56 | 100 mm bore, thickness not less than 4.80mm |
| 57 | 80 mm bore, thickness not less than 5.40mm. NOTE for SI No. 22 & 23: (i) Earth work will be measured and paid seperately. (ii) Labour required for fixing of MS pipe is included in SL item No. 21. |
| 58 | Material and labour for run lead joint for spigot and socketpipes (CI/DI) and fittings to the following sizes complete all as specified and directed by Engr-in-Charge. |
| 59 | 80 mmbore. |
| 60 | 100 mmbore. |
| 61 | 150 mmbore. |
| 62 | 200 mmbore. |
| 63 | Supply and replacement of fire hydrant landing valve gun metal, type B (Double head outlet) of 63 mm bore conforming to IS-5290 complete all as specified and directed. |
| 64 | Supply and replacement of fire hydrant landing valve gun metal, type A (Single head outlet) of 63 mm bore conforming to IS-5290 complete all as specified and directed. |
| 65 | Repairing/ Servicing offire hydrant valvesof any type fixed to buildings by replacing seat, Neoprene "O" rings, spring loaded side locks including renewal of necessary bolts/nuts/washers to arrest leakage complete all as directed by Engineer-in-charge. |
| 66 | Supply and replacement of fire brigade inlet connection 4 way including with accessories suitable for 150mm dia pipe complete all as specified and directed. |
| 67 | Supply and replacement canvas pipe 15 metre long hose pipe confirming to IS 636 complete with male and female coupling and drum made out ofMS sheet confirming to IS 903 complete all as specified and directed |
| 68 | Supply and replacement of hose boxes of size 800x 600 x 250 mm with 2 mm thick CRCA sheet, frame made out of 25 x 25 x 5 mm thick MS angle Iron with double door, glazed with 4 mm thick sheet glass and including necessary locking arrragement, preparation and applying two coats of synthetic enamelpaint (fire red outside and brilliant white inside) over a coat of zinc chrome primer complete all as specified and directed by Engineer - in - Charge. |
| 69 | Supply and replacement of hose reel drum and hose reel of 20mm dia and 30 metre lengthconforming to IS-5132 including gun metal hose reel cap (shank) suitable for existing fire fighting line complete all as specified and directed. |
| 70 | Repair/ maintenance of fire hose box by changing of damaged doors along with locking arrangements, front glass of existing size, PCC foundation and necessary rubber gaskets for doors complete all as directed by Engineer-in-Charge. Note:- Quoted rates are inclusive of one coat of synthetic enamel paint, (paint red and inside clean white paint). |
| 71 | Supply and replace Pressure gauge dial of 6" dia, 0-16 kgs/cm2 ratings suitable to the existing water pipe lines including suitable fixing lines with necessary fixing arrangement complete all as specified. Make:- H-GUARD/FIEBIG. |
| 72 | Supply and replace Pressure gauge dial of 6" dia, 0-10 kgs/cm2 ratings suitable to the existing water pipe lines including suitable fixing lines with necessary fixing arrangement complete all as specified. Make:- H-GUARD/FIEBIG. |
| 73 | Supply and fix DOL starter suitable for AC 415 Volts, 50 Hz, 3 Phase pumpset out put at 3 to 10 HP including removing the old unserviceable starter from the panelcomplete all as directed. |
| 74 | Supply and fix DOL starter suitable for AC 415 Volts, 50 Hz, 3 Phase pumpset out put at 15 to 30 HP including removing the old unserviceable starter from the panelcomplete all as directed. |
| 75 | Supply and fix DOL starter suitable for AC 415 Volts, 50 Hz, 3 Phase pumpset out put above 30 to 60 HP including removing the old unserviceable starter from the panelcomplete all as directed. |
| 76 | Dismantling the old unservicable installation "Glow sign" board and Design fabricated, supply, install Glow sign of size 2.00 x 1.00 x 0.25 metre of boardmade up of Plain steel sheet of 2.0 mm thick with M S medium grade Square tube supports of size 25mmwith Bakelite flex (Transparent) type white and blue in colour by computerised stenciled letters likevarious clean white capital letters on blue/ other colour as directed in English/ Hindi with required numbers and LED tube lights 4x12 watts (bajaj/Philips) fitting complete including necessary fitment, electrical wiring, MS angles/ Steel round bars, GI sheets, pipes clamps bolts & nutsall as directed by Engineer-in-charge. |
| 77 | Dismantling the old unservicable installation "Glow sign" board and Design fabricated, supply, install Glow sign of size 3.00 x 1.50 x 0.25 metre of boardmade up of Plain steel sheet of 2.0 mm thick with M S medium grade Square tube supports of size 25mmwith Bakelite flex (Transparent) type white and blue in colour by computerised stenciled letters likevarious clean white capital letters on blue/ other colour as directed in English/ Hindi with required numbers and LED tube lights 4x12 watts (bajaj/Philips) fitting complete including necessary fitment, electrical wiring, MS angles/ Steel round bars, GI sheets, pipes clamps bolts & nutsall as directed by Engineer-in-charge. |
| 78 | Supply and fixing or laying in trenches / walls / floors of the following size medium grade GI pipes with all fittings including taking down old unserviceable one all as specified and directed. |
| 79 | 20 mm bore |
| 80 | 25 mm bore |
| 81 | 40 mm bore |
| 82 | 50 mm bore |
| 83 | 80 mm bore |
| 84 | 100 mm bore |
| 85 | Supply and fix the following sizes of Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including cutting the pipe line and taking down old unserviceable valves wherever required complete all as specified and directed. |
| 86 | 20 mm dia |
| 87 | 25 mm dia |
| 88 | 40 mm dia |
| 89 | 50 mm dia |
| 90 | 80 mm dia |
| 91 | S&F 20 mm (outer dia) 3-layer PP-R (Polypropylene random copolymer) concealed SDR 7.4 Stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply all PP-R plain and brass threaded polypropylene random fittings fixed to walls, ceilings etc, complete including taking down old unserviceable GI pipe all as specified and directed by Engineer-in-charge: |
| 92 | All as per SL item No.42 above but of size 40 mm (outer dia) |
| 93 | All as per SL item No.42 above but of size 50 mm (outer dia) |
| 94 | All as per SL item No.42 above but of size 75 mm (outer dia) |
| 95 | Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth and getting out soft / loose soil for laying of cables, pipes etc, complete all as specified and directed by Engr-in- Charge. |
| 96 | Returning filling in, including spreading levelling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed |
| 97 | Removing excavated soil to a distance n.exc. 50 m distance and depositingwhere directed at a level n.exc 1.5 m above the starting point complete all as specified and directed by Engr-in- Charge. |
| 98 | M&L for PCC 1:3:6, type C1 (using 20 mm graded granite stone aggregate) for making good the surface where road cutting/ hard standing/ paths complete all as specified and directed by Engineer-in-Charge. |
| 99 | M & L for Jungle cleaning by cutting and clearing away all grass vegetation, wild growth, sapling, shrubs, brushwoods, under growth roots, cutting of bushes, tree trunk of girth not execeeding 30 cm, cutting of trunk, portion protuding over ground, filling holes and leveling of ground and removing unserviceable materials to a distance n.exe 50m, compelte all as speicified. |
| 100 | Supply and Fixing wall mounted slim LED batten with extruded aluminium housing with integrated LED driver with LED tube including removing existing unserviceable one complete all as directed. Make: LHEXBQP5IN1W018 of Havells India Ltd or its equivalent in Philips/ Surya Roshini Ltd/ Wipro/ GE as approved by GE. |
| 101 | Supply and replace LED street light fitting of 45 Watt capacity with IP 66 protection inlcuding electronic driver and accessories suitable for pole dia upto 40 mm including GI bracket made of 40 mm gia Gi pipe light grade of length not less than 1.2metre bend to shape as reuired including necessary MS clamps, bolts, nuts, duly painted with 2 coats of synthetic enamel paint over a coat of primer complete all as directed by Engineer-in-charge. Make: CAT No. SLE UL 150W IP 66 LXN of Surya Roshini or its equivalent in Philips/ Havells India Ltd/ Wipro/ GE/ Bajaj. |
| 102 | Supply and replacement of LED flood light luminaires of 100 Watt capacity with high pressure die cast housing with IP 66complete all as directed by Engineer-in-charge. Make: LHEPBFUEIN6W050 of Havells India Ltd or equivalent in Philips/ / Surya Roshini Ltd/ Wipro/ GE. |
| 103 | M & L for carrying out chemical analysis (BOD/COD) test of treated sewer water of STP at "Naval Park" from Govt authorised laboratory all as per CPCB Norms complete all as directed by Engineer-in-charge. Note : The rate quoted is deemed to be inclusive of testing and collection of water samples in sealed PVC container at STPs. |
| 104 | M & L for carrying out chemical analysis (BOD/COD) test of treated sewer water of STP at "Amzari Park" from Govt authorised laboratory all as per CPCB Norms complete all as directed by Engineer-in-charge. Note : The rate quoted is deemed to be inclusive of testing and collection of water samples in sealed PVC container at STPs. |
| 105 | M&L for preparation of old painted steel surfaces of Centrifugal / monoblock pumpset of capacity 3 HP to 15 HP including its inlet and outlet connections by applying one coat of Synthetic enamel paint of approved colour on rusted surfaceand writing MES nos complete all as specified and as directed. |
| 106 | M&L for preparation of old painted steel surfaces of Centrifugal / monoblock pumpset of capacity 30 HP to 60 HP including its inlet and outlet connections by applying one coat of Synthetic enamel paint of approved colour on rusted surfaceand writing MES nos complete all as specified and as directed. |
| 107 | M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of oil bound distemper complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
