}

Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And Repair Mant Of Civil Works At R And O Flt And Joinery And Glazing Wks At Upper Lkm And Koirengei Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And , LEIMAKHONG-Manipur

Military Engineer Services-MES has published Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And Repair Mant Of Civil Works At R And O Flt And Joinery And Glazing Wks At Upper Lkm And Koirengei Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And . Submission Date for this Tender is 12-10-2021. Civil Work Tenders in LEIMAKHONG Manipur. Bidders can get complete Tender details and download the document.




Tender Notice

29278335
Corrigendum : Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And Repair Mant Of Civil Works At R And O Flt And Joinery And Glazing Wks At Upper Lkm And Koirengei Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And
Open Tender
Indian
Manipur
LEIMAKHONG
12-10-2021

Tender Details

Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And Repair Mant Of Civil Works At R And O Flt And Joinery And Glazing Wks At Upper Lkm And Koirengei Repair To Sunken Portion Flooring Plastering Plumbing And Sanitary Fitting And Repair Mant Of Civil Works At R And O Flt And Joinery And Glazing Wks At Upper Lkm And Koirengei

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 04-Oct-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 11-10-2021
2 11-Oct-2021 Due Date Extended Admin Corrigendum Date Extend 12-10-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 74000.0 /-
Tender Value
INR 37 Lakhs /-

BOQ Items

Name of Work: REPAIR TO SUNKEN PORTION,FLOORING,PLASTERING,PLUMBING AND SANITARY FITTING AND REPAIR /MANT OF CIVIL WORKS AT R&O FLT AND JOINERY AND GLAZING WKS AT UPPER LKM AND KOIRENGEI.
Sl. No. Item Description
1B/R work
2M&L forPCC M-15 grade (Nominal Mix)using 20mm graded crushed stone aggregate mixed with water proofing compound @ 3% by weight of cement as in concrete padding,laid to require slope,including finishing the concrete surface fair and even without using extra cement. complete all as specified and directed.
3M & L for type F2 PCC (1:7:12) using 40 mm graded crushed stoneaggrigateas in filling of sunken slab after laying carrying out required tests for CI pipes joints complete all as specified and directed.
4M&L forPCC M-10 grade (Nominal Mix)using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed.
5M&L for PCC type M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate as in coping incl necessary formworkcomplete all as specified and directed.
6Supply of Integral water proofing Compound ISI marked.
7M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
8M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.
9Cutting chases, pinning in on brick wall making good to facings where require and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills,sunshades, shelves,lintels,etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc and makin good ,cutting not exc 10 cm girth. complete all as specified and directed.
10M & L 2nd class hard woodplain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 6 sqcm and n.exc 13sqcm . complete all as specified and directed
11S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 25 x25 x0.35mm and main/cross tee of size 24 x38 x0.70mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Boardincluding fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.
12S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
13S&F for 30mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(b) complete all as specified and directed.
14S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
15S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary" labours; articles n exc 200 cu. cm each complete all as specified and as directed.
16Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.
17Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqmeach complete all as specified and directed.
18Taking down shutters of any description n.exc. 1 sqmeach and removing all unserviceable materials from site complete all as specified and directed.
19Taking down shutters of any description n.exc. 1 sqmeach including easing,adjusting and refixing in same opening with builders hardware as required,renewal of unserviceable screws and necessary welding rivetting etc complete all as specified and directed.
20Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each and removing all unserviceable materials from site complete all as specified and directed.
21Taking down shutters of any description n.exc. 1 sqm but n.exc 2sqmeach including easing,adjusting and refixing in same opening with builders hardware as required,renewal of unserviceable screws and necessary welding rivetting etc complete all as specified and directed.
22S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in section 8 SSR Part II complete all as specified and directed.
23S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
24M& L factory made uPVC wihite colour casment (Openable) Door made of extruded profile with wall thickness of 2.3mm (+-0.2mm) .Window profile with hollow section with multi chamber, frame (60mmx58mm), sash (60mmx78mm).T profile (One vertical length in between two shuttrs )(60mmx74mm).Glazing bead (35mmx20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 +-0.2 mm thick galvanized steel Frame (28mmx21.5mm), sash (31mm x 27 mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners.Hardware : (Casement door handle made of zinc alloyed (white powder coated).Corner striker.Secondary Striers.Cylinder.Door transmission gear made of mild steel with multi point locking system with strikes.3D Hinges of zinc alloyed (white powder coated)(and 5mm thick glazing with selected quality glass.complete all as specified and directed. ( Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured payment purpose). complete all as specified and directed.
25M & L for providing and fixing factory made Upvc white colour sliding window area n.exc 2 sqm each. Three track made of extruded profiles with wall thickness of 2.3mm(+0.2mm) window profile with hollow section with multi chamber.Frame (88mmx52mm) , sliding sash (42mmx67mm).Sliding mesh Sash (42mmx57mm) Sliding interlock (One vertical length in each shutters) (45.5mmx28mm), Glazing bead (24.5mmx16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., makin arrangement for fixing of hardware.EPDM gasket, 1.2+-0.2mm thick galvanised steel Frame (30mmx18mm) 2 nos, sliding sash (30mmx18mm) , sliding mesh sash (26mmx10mm) profile to be insteted in required profile, frame will be fixed to the wall with 8mmx100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated), steel roller system.Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories).(Note: The unit rate quoted by contractor excldes cost of glass and includes all other connected accessories.Net pening will be measured for paymen purpose.
26S& F aluminium anodised sliding window, 3 track system, fully glazed fitted with one side visible glass of 5.5mm thick, shutter frame size 44 x 24 x 1.8mm including chowkat of size 80 x 40 x 1.8mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50mm dia and aparture 1.18mm) with three track , including aluminium grill on out side throughout & providing necessary jointing cleats ,glazing clips,rubber packing, anodised aluminium snap beading,handle,screw complete all as specified and as directed.
27M&L for anodised aluminium door with member size 48x44x2mm vertical and top rail, 50x44x2mm lock rail and 94x44x2mm bottom rail, chowkhat size 80x40x1.8mm including 5.5mm thick one side vision glass, hydraulic door closer, spring door stopper, aluminium round handle 100mm dia 02 nos per door shutter including necessary jointing cleat, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.
28S&F 200mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
29S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
30S&Fin repairs 125 mmlong aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
31S&F in repairs 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
32S&F in repairs 200mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.
33S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
34S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
35S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
36S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
37S&F 125mm long butt hinges extruded aluminium aloy with galvanised mild steel hinge pin anodised polished and fixed type B-21 complete all as specified and directed.
38S&F inMS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in floor complete all as directed.
39S&F in repair MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed in floor complete all as directed.
40S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.
41S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed.
42S&F in repairs 150mm long alumiunium handles cast type anodised complete all as specified and directed.
43S&F in repair 100mm aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
44S&Fbrass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats,complete all as specified and directed.
45S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed.
46S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed.
47M&L for MS work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
48M&L for MS work as inhold fasts; and similar small articles conforming to Fe-290 Gde-E 165 including sanding & taring. complete all as specified and directed.
49S & F Mild Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
50S & F Mild Steel ventilators with top hung shutter including hinges ,steel peg stay .complete all as specified and directed.
51Supply and fix 0.63mm thick galvanized corrugated mild steel sheet, having zinc coating of 275 gm per Square metre with corrugation of Grade ‘B’ with 12.5mm depth of corrugation with two corrugation side lap fixed ’J’ type or ‘L’ type or cranked hook bolts complete all as specified and directed.
52S&F 0.63mm plain, galvanised, mild steel sheeting onwall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275complete all as specified and directed.
53S&F 0.8mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, dripand straight flashings (length and girth as fixed) with grade of zinc coating 275complete all as specified and directed.
54M & L for 6mm thick plywood (no of ply 05), grade BWR,type BB, fixed with nails to timber frame work onceilling complete all as specified and directed.
55M&L for 75mm thick PCC M-10 grade(Nominal mix) using 40mm graded stone aggregate as in plinth protection finishing surfaces even andsmooth without using extra cement complete all as specified and directed.
56M&L 25mm thick cement concrete grade M15 using 20mm graded crushed stone aggregateasin floor, finishes even and fair . complete all as specified and directed.
57M&L for 30mm thick PCC M-15 grade(Nominal mix) using 12.5mm graded aggregate in sunken floors.complete all as specified and directed.
58Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust . complete as specified and directed.
59M & L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. complete as specified and directed.
60S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backingin CM (1:4) complete all as specified and directed.
61M&L colourednon-skid joint free ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, setand jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
62Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tilesand rubbish off the premises complete all as specified and directed.
63M&L for rendering 15mm thick on fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
64M & L for rendering 15mm thick plaster in cement mortar (1:4)on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
65M&L for15mm thick rendering to sides and bottom of sunken slab in cement mortar(1:3) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
66M & L for rendering 5mm thick plaster in cement mortar (1:3)on fair faces ofon concrete surfaces as in ceiling and finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
67M & L for rendering 10mm thick plaster in cement mortar (1:4)on fair faces ofon concrete surfaces as in chajja and finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)
68M & L for 15mm thick screed bed or bedding layer in cement mortar (1:3) for EPU floor coating . complete all as specified and directed.
69M & L for 3mm thick wall care putty on plastered surface of wall . complete all as specified and directed.
70M & L for 3mm thick wall care putty on ceiling . complete all as specified and directed.
71Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as directed.
72M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed.
73M&L for preparation of old painted surfaces of walls and applying one coat of cement base paint complete all as specified and directed.
74M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.
75M&L for preparation of old painted surfaces of walls and applying one coat of oil bound distemper over a coat of primer complete all as specified and directed.
76M&L for preparation of old painted surfaces of walls and applying one coat of white .complete all as specified and directed.
77M&L for preparation of new plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed.
78M&L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer. complete all as specified and directed.
79M&L for preparation of new plastered surfaces of walls and applying two coats acrylic exteriorpaint over a coat of primer. complete all as specified and directed.
80Material and labour for 5mm thick EPU floor coating system comprising with the following course of treatment/specifications from bottom to top:- (a) Preparation by cleaning surface from dust, dirt, muck, moisture & foreign material and cleaned by means of using mechanical scrubber/grinder, chemical treatment for oil if required. (b) Application of primer which shall be a two component solvent- free epoxy polyamido amine system havinga volumetric ratio of mixing of 1:1 or as per manufacturer’s instructionto yield thickness of 200 microns. Make: “NITOPRIME-25” of Fosroc Chemicals(India) Pvt. Ltd. Or equivalent approved make of SIKA (c) Applying the screed layer with High strength self-smoothing epoxy underlay of minimum thickness of 3mm (2800 microns).The self levelling screed shall consist of a low viscous epoxy amine cured system and graded aggregates (special silica). The self epoxy system shall have a volumetric ratio of mixing of resin in 2:1 ratio.The aggregates shall be added over the copper tape in the ratio of 1:3 or 1:3:5 or as per manufacturer’s instruction. Make: “NITOFLOR EU5” of Fosroc Chemicals(India) Pvt. Ltd. Or equivalent approved make of SIKA.
81(d)Applying epoxy resin based floor topping shall be supplied in pre-weighed packs and ready to mix and use, which will consists of resin, hardener,EPI(Colour concentrate) and formulated aggregates to be mixed with resin & hardener in the pre-weighed ratio add EIP colour (colour concentrate) and formulated aggregates to agitate the mixture by an electrically driven motor and lay the mixture to the thickness of 2mm(2000 microns). Make: “NITOFLOR SL 2000” of Fosroc Chemicals(India) Pvt. Ltd. Or equivalent approved make of SIKA
82Material and labour for 100/150mm wide polyurethane protective coating(Paint) which is a two component, pigmented, aliphatic polyurethane coating possessing good resistance to long term exposure of UV rays and chemical attack complete all as specified and as directed. Make: “NITOCOTE UR512” of Fosroc Chemicals(India) Pvt. Ltd. Or equivalent approved make of SIKA
83M&L for hot thermoplast & cold solvent based machine used road marking paint with glass beads on top surface, not less than 2mm thick for making lines, dashes,arrows etc. conforming to BS 3262 complete all as specified and directed. ( Make: STP/Shalimar/Berger/Jenson & Nicholson or any ISI marked as pproved by GE
84S&F sheet glass 3mm thick, ordinary quality and glazing with oil puttyin squarenot exc 0.5 sqm in each pane complete all as specified and as directed.
85S&F sheet glass 4.8 mm thick, ordinary quality and glazing with oil puttyin squarenot exc 0.5 sqm in each pane complete all as specified and as directed.
86S&F figured glass 3mm thick, pin headed typeand glazing with oil puttyin squarenot exc 0.5 sqm in each pane complete all as specified and as directed.
87Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
88S&F figured glass, pinhead type, 4mm thickin squarenot exc 0.5 sqm in each pane complete all as specified and as directed.
89S & F Aluminium anodized(with minimum 15 micron anodized) grill DG-104,10mmx5.2mm thick fixed with" F" section complete all as specified and as directed.
90M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.
91M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed.
92M&L forprepraration of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
93M&L for preparation of new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc and applying two coats syntheticpaint over a coat of red oxide primer complete all as specified and directed.
94M&L forprepraration of old painted surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applyingone coat of synthetic enamel paintcomplete all as specified and directed.
95S&F in repairtoilet paper holder of stainless steel of size 10.5cmx9cm to wall with chromium plated (cp) brass screws. complete all as specified and directed.
96S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
97S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
98S&F GI tubing 40mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
99Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
100Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
101Taking up or down 40mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
102Dismantling water tanks capacity exc. 500 litres and n.exc. 1000 liters and removing to store complete all as specified and directed.
103S&F rotational moulded polyethylene water storage tank 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections & brass ball valve complete all as specified in SSR Part-I and as directed.
104S & F in repair 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed.
105S&F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedfor 15 mm bore dia ofpipe and fixed complete all as specified and directed.
106S&F in repairstop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cupfor 15mm bore pipe complete all as specified and directed.
107S&FGun metal, globe or gate valves(ISI Marked), with iron wheel head, screwed both ends for 40mm bore iron pipe and fixed complete all as specified and directed.
108S&FGun metal, globe or gate valves(ISI Marked), with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed complete all as specified and directed.
109S&F in repairstop valves(ISI marked) cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) for 15mm bore pipe complete all as specified and directed.
110S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms)
111S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms)
112S&FPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
113DismantlingPVC pipe, trap ,sockets of any dia from wall, trenches and making good disturbed portion. complete all as specified and directed.
114S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall as in waste/soil pipe complete all as specified and directed.
115S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall as in waste/soil pipe complete all as specified and directed.
116S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and directed
117M&L forPVC (SWR) junction(singleT) of dia 75mm complete all as specified and directed.
118M&L forPVC (SWR) vent cowl of bore 110mm complete all as specified and directed.
119M&L forPVC (SWR) vent cowl of bore 75mm complete all as specified and directed.
120S&F 125/110mm dia PVC (SWR) "S" trap, plain with grating including setting and jointing with solvent cement completeall as specified and directed.
121S & F in repair vitreouschina wash down water closet pan (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (excluding flushing cistern, flush pipe) including all fitting and closet seat cover,back closed pattern with flat bottom and cover MS chromium plated hinging device.completeall as specified and as directed.
122S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
123S&F in repair vitreous china wash hand basin white flat back of size 580x440mm including brackets, cutting for and pinning in ends of brackets or erecting stands also including 32mm dia brass chromium plated waste coupling, PVC waste pipe ,pillar tap fancy type cast copper alloy and 15mm dia PVC connection pipe 450 mm with brass nuts complete all as specified and directed.
124S&F in repairs 125mm dia chromium plated (ABS body) shower rose with or without swivel joints complete all as specified and directed.
125S&F in repairPVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 32mm bore with brass heads and washers all as specified and directed.
126S&F in repair600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
127S & F in repair cabinet Mirror of size 600mm x 450mm.complete all as specified and directed.
128S&F in repairflexible jet shower 25mm dia including reinforced CP flexible pipe 1.20m long heavy duty and hook including all necessary fittings with two in onebib cock(arrangement for fixing jetnshower). complete all as specified and directedith stop cock
129S&F in repairdropery rod powder gold coated 25 mm internal dia with pully push and pull type all as per sample with decorative brass end knobs. complete all as specified and directed
130Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
131Demolition of cement concrete (unreinforced) in any position not otherwise specifically provided completde all as specified and directed.
132Dismantling plain orcorrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed.
133Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail