Madhyanchal Vidut Vitran Nigam Limited has published Construction Of New 33 / 11 Kv ( 1X5 Mva ) Substation Sukhbasa And Associated 33 Kv And 11 Kv Feeders At District-Lakhimpur On Semi-Turnkey Basis Construction Of New 33 / 11 Kv ( 1X5 Mva ) Substation Sukhbasa And Associated 33 Kv And 11 Kv Feeders A. Submission Date for this Tender is 29-09-2021. Feeder Pillar Tenders in LAKHIMPUR Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | 33 KVTerminal Gantry complete with all Accessories. (As per Schedule-39) |
2 | 33 KVBusbar Gantry complete with structure and all accessories including Panther conductor (As per Schedule-40) |
3 | ACSR Panther Conductor |
4 | PG clamp for ACSR Panther Conductor |
5 | 33 KV Line Isolator |
6 | 33 KV Bus Isolator |
7 | 33 KV Line/ Bus Isolator Structure complete with Plinth and Foundation.(As per Schedule-41) |
8 | 33 KV Fuse Set |
9 | 33 KV Post Insulator |
10 | 33 KV Lightening Arrester |
11 | 33 KV Fuse Set/ Post Insulator/ Lightening Arrestor Structure complete with Plinth and Foundation.(As per Schedule-42) |
12 | 33/11 KV 05 MVA Transformer as per Specificationof MVVNL (Provided by department) |
13 | Power Transformer Plinth of size 3.46mtr x4.46 mtr.having 0.5 mtr below ground level and 0.5 mtr above ground level with 2 nos 90Lbs rail pieces 3.46 mtr each.(As per Schedule-43) |
14 | Neutral Stand Structure complet with plinth and foundation. (As per Schedule-44) |
15 | Cable Stand structure complete with plinth and foundation. (As per Schedule-45) |
16 | 33 KV VCB 800 Amp, with Structure 750 MVA (As per Specification of MVVNL)(Provided by department) |
17 | Plinth & Foundation for the Structure of33 KV VCB |
18 | 33 KV CT 1 Ph 200/100/1 Amp. |
19 | 33 KV CT Structure complete with Plinth and Foundation.(Schedule-42). |
20 | 33 KV Single T/F Control Pannel with structure.(As per Specification of MVVNL) |
21 | 33 KV Single Feeder control pannel. (As per Specification of MVVNL) |
22 | 24 Volt Battery & Battery charger with cabinet. |
23 | 11/0.4 KV, 63 KVA Transformer as per Specification |
24 | Control cable (Cu) 2x2.5 sq.mm. |
25 | Control cable (Cu) 4x2.5 sq.mm. |
26 | Control cable (Cu) 6x2.5 sq.mm. |
27 | Control Cable Trey |
28 | Control cable Trench ,12" Wide. (As per Schedule-46) |
29 | Trench Cover 0.5 Mtr. Long 300 mm Wide for 12" Wide Trench. (As per Schedule-47) |
30 | Earthing of Outdoor switchyard (Earthmat) for 33/11 KV Substation (As per Schedule-48) |
31 | Indoor Earthing for 33/11 KV Substation. |
32 | Pipe Boring Earthingupto Water level as per specification.(As per Schedule-49) |
33 | Chemical Pipe Earthing (80 mm Dia ,3 Mtr long.) (As per Schedule-49A) |
34 | Chain link fencing of Sub Station With Gate & ToeWall ( As per specification). (As per Schedule-50) |
35 | Lightening Arrangement in Switchyard and Sub-Station Area complete with all accessories (As per Schedule-51) |
36 | L.T. Distribution Panel & Misc. Itemsfor Sub-Station.( As per specification). (As per Schedule-52) |
37 | 11 KV Incoming VCB 600/300/5 AMP, 350 MVA (Provided by department) |
38 | 11 KV Outgoing VCB 200/100/5 AMP, 350 MVA (Provided by department) |
39 | 11 KV 3x300 Sq.mm. XLPE Cable |
40 | 11 KV 3x185 Sq.mm. XLPE Cable |
41 | 11 KV 3x70 Sq.mm. XLPE Cable |
42 | 11 KV 3x300 SQ mm XLPE Cable Outdoor Jointing Kit . |
43 | 11 KV 3x300 Sq. mm. XLPE Cable Indoor Jointing Kit . |
44 | 11 KV 3x185 Sq. mm XLPE Cable Outdoor Jointing Kit. |
45 | 11 KV 3x185 Sq. mm XLPE Cable Indoor Jointing Kit. |
46 | 11 KV 3x185 SQ MM XLPE S/Th Jointing Kit |
47 | 11 KV 3x70 Sq.mm. XLPE CableIndoor Jointing kit |
48 | 11 KV 3x70 Sq.mm. XLPE Cable Outdoor jointing Kit |
49 | Single CorePVC Cable, 1x630 sq.mm. |
50 | Switchyard leveling by sand and interlocking of edge as per (As per Schedule-56) |
51 | Soil filling in low land area |
52 | Painting of S/S Structure |
53 | ST Pole 11 Mtr. SP-55 |
54 | Single support 13 Mtr. STP (SP-72) |
55 | PCC Pole, 9.0 Mtr. Long |
56 | PCC Pole, 8.5 Mtr. Long |
57 | Extra Stud Pole of 11 Mtr STP complete with clamps, grouting, concreting, plinthing |
58 | Extra Stud Pole of 09 Mtr PCC complete with clamps, grouting, concreting, plinthing |
59 | X-Arm Channel 100x50x6 mm V-type (9.6 Kg/Mtr.) for 33 KV line. |
60 | V-type cross arm 65x65x6 mm, for 11 KV line. |
61 | 11 KV TPMO |
62 | 11 KV Fuse set |
63 | Holding clamp for Cross arm, TPMO, Fuse set ,LT T- off with Bolts & Nuts for ST Pole. |
64 | Holding clamp for Cross arm, TPMO,Fuse set, LT T- offetc with Bolts & Nuts for PCC Pole. |
65 | LTPVC cable 3.5x70/35 sq.mm |
66 | 33 KV Composite polymer Pin Insulator with nut & washer |
67 | 11 KV Composite polymer Pin Insulator with nut & washer |
68 | 33 KV Polymer Disc Insulator B&S type 70 KN |
69 | 11 KV Polymer Disc InsulatorT&C type 45KN |
70 | 11 KV Disc Insulator (Porceline type) B&S type 70KN |
71 | 33 KV Disc Fittings B&S type 70 KN |
72 | 11 KV Disc Fittings T&C type 45 KN |
73 | 33 KV Disc Fittings (Porceline type) B&S type 70 KN for Dog |
74 | M.S. Angle Iron 65x65x6mm, 4300 mm long bracing with clamp (5.8 Kg/Mtr.) |
75 | M.S. Angle Iron 65x65x6mm, 2700 mm long Bracing, with clamp (5.8 kg./m) |
76 | M.S. Angle Iron 65x65x6mm 3200mm long, (5.8 Kg/Mtr) for cable with clamp |
77 | M.S. Top Channel 125x65mm, 3200mm (13.1kg/mt) with clamp, bolts, nuts and washers |
78 | M.S.Topchanel 100X50mm, 2240 mm long (9.6 Kg./m) with clamp |
79 | MS chanel 100X50mm, (1500mm) long (9.6 Kg./m) for Cable Exposer DP with clamp. |
80 | MS Channel 125x65x2240mm (Top) with clamp. |
81 | MS Channel 100x50x2028 mm (Dropper for Fuse Set & TPMO) |
82 | MS Channel 125x65x1300mm T-Off |
83 | MS Angle 75x75x6mm 2028 mm with clamp ,bolt & nut (TF base) |
84 | M.S. Angle Iron 65x65x6mm 2028 mm long, (5.8 Kg/Mtr) for cable hoisting support with clamp |
85 | MS. Channel 100X50mm (9.6 Kg/mtr.) with Supporting Angle 75x75x6mm (6.8Kg./Mtr.) for Cable Standcomplete with clamps, grouting, concreting, plinthing |
86 | M.S. guarding Angle Iron 75x75x6 mm (6.8Kg/Mtr.) |
87 | Guarding Angle 65x65x6mm (2500/1600 mm long) |
88 | G.I. Wire 6 SWG for guarding along the line |
89 | G.I. Wire 8 SWG for guarding a cross the line |
90 | Guarding angle holding clamp, packing piece, nut & bolts etc. for ST Pole. |
91 | Guarding angle holding clamp, packing piece, nut & bolts etc.for PCC |
92 | Eye Bolt |
93 | Earthing of Pole by MS earthing rod of 20x2500 mm. and 6 SWG earthing wire etc. |
94 | 33 KV Stay complete with all assesories including concreting of stay set [Stay rod 20x1800mm, stay wire 7/8 SWG 10kg, stay clamp, Guy Insulator bolt & nut with concrete grouting (0.108 Cu.mt/Stay)]. |
95 | 11 KV Stay complete with all assesories including concreting of stay set (Stay rod 16x1800 mm, stay wire 7/10 SWG 5 kg, stay clamp, Guy Insulator bolt & nut with concrete grouting (0.108 Cu.mt/Stay) |
96 | ACSR Dog Conductor |
97 | ACSR Rabbit Conductor |
98 | 33 KV 3x300 mm2XLPE cable |
99 | Heat Shrinkable jointing kit for 33 KV 3x300 Sq. mm. XLPE outdoor |
100 | Heat Shrinkable Cable jointing kit straight through for 33 KV 3x300 Sq. mm. XLPE Cable |
101 | Stone pad (300x300x75 mm) |
102 | P.G. Clamp for Dog/ Rabbit |
103 | 33 KV SMC Number plate with clampwith N&B |
104 | 11 KV SMC Number plate with clampwith N&B |
105 | 33 KV SMC Danger board with clamp with N&B |
106 | 11 KV SMC Danger board with clamp with N&B |
107 | G.I. Barbed wire (2Kg/pole) |
108 | Alluminium paint(For STP) |
109 | Red Oxide paint |
110 | Post Office Paint (For Cross Arm & upper portion of STP) |
111 | Bolt, Nut and Washers all Size |
112 | Concreting of supports with plinth (0.268 Cu.m. each) (for 8.5 Mtr. & 9 Mtr. PCC Pole.) |
113 | Concreting of supports with plinth (0.44 Cu.m. each) (for 11 Mtr. & 13 Mtr. ST Pole.) |
114 | E Bracket for 33 KV |
115 | E Bracket for 11 KV |
116 | F bracket/ Top Cleat for 33KV |
117 | F bracket / Top Cleat for 11KV |
118 | M.S. Pipe 150 mm diameter 6 mm thickness |
119 | G.I Pipe 150 mm diameter 6 mm thickness |
120 | G.I Pipe 100 mm diameter |
121 | Hoisting of 33 KV cable with GI Pipe 6" diameter (3 mtr. long per hoisting), pipe/cable holding clamp, nut & bolts, washer etc. |
122 | Hoisting of 11 KV cable with GI Pipe 4" diameter (3 mtr. long per hoisting), pipe/cable holding clamp, nut & bolts, washer etc. |
123 | High pressure Testing |
124 | Tree cutting compensation |
125 | Laying of 33 KV 3x300 sq.mm., XLPE cable (single circuit) by digging medhod depth minimum 1.2 mtr below ground level and 450mm wide by excavation of earth. The work include supplying of fine sand, bricks, stone slab, refilling and remming of the left out soil and levelling etc. |
126 | Drilling and laying of 33 KV underground cable using HDD method without using HDPE pipe, single circuit, below minimum 1.5 mtr depth from ground level. |
127 | Laying of 3x300sqmm 33 KV, XLPE insulated cable underground in M.S. pipe (Pipe to be laid by HDD method), single circuit.below 1.5 mtr depth from ground level minimum. |
128 | Laying of 11 KV 3x300/185 sq.mm., XLPE cable (single circuit) by digging medhod depth minimum 1.0 mtr below ground level and 450mm wide by excavation of earth. The work include supplying of fine sand, bricks, stone slab, refilling and remming of the left out soil and levelling etc. |
129 | Laying of 11 KV 3x70 sq.mm., XLPE cable (single circuit) by digging medhod depth minimum 1.0 mtr below ground level and 450mm wide by excavation of earth. The work include supplying of fine sand, bricks, stone slab, refilling and remming of the left out soil and levelling etc. |
130 | Cable route marker |
131 | Electrical Safety Department NOC charges documentation and approval fee etc . |
132 | Cost of Construction of Control room Building, Boundry Development of site, Water Sanitation, Water Tank, Submersible etc. along with all associated materials as per Schedule of Control Room Building. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail