Tender For 1 Dismantling Works: Carefully Dismantling Old Ply Laminated Panelling Including The Frame Work, Wooden Members Of The Cupboards, Old Wooden Window Frame With Shutters And Metal Frame And Also Mosquito Mesh Frame Completely And Stacking At -Multi State

Tender For 1 Dismantling Works: Carefully Dismantling Old Ply Laminated Panelling Including The Frame Work, Wooden Members Of The Cupboards, Old Wooden Window Frame With Shutters And Metal Frame And Also Mosquito Mesh Frame Completely And Stacking At A Place Directed And Removing The Same Excluding The Metal Frames From The Premises, Removing False Ceiling Including Channels And Accessories, Carefully Chipping And Removing The Existing Tile Flooring Including Screed Concrete So As To Receive Bare Floor / Slab Finish Where Instructed, Including Removal Of Skirting If Any. The Scope Shall Be Inclusive Of Removal Of This Debris From All The Floors And Stacking At One Designated Place And Carting Away The Same From The Premises As And When Instructed By The Banks Engineer. Approximate Dimensions Of Each Room: 4.5 M X 3.5 M. ( Rate To Be Quoted As Lumpsum Per Room ) 2 2 Screed Concrete For Levelling: Providing, Laying, Spreading, Levelling And Manually Compacting Using Hand Rammers, P.C.C M10 Grade ( 1:3:6 ) Of Varying Thickness For An Average Consolidated Thickness Of 20 Mm To 100 Mm ( As Per Site Condition ) Using Approved Quality 20 Mm And Down Size Graded Broken Granite Stone Aggregates, Approved Quality River Sand And Portland Cement Of Approved Make, As Screed Layer In Flooring. The Surface Of The Screed Laid As Above Shall Be Finished Using Floats / Trowels. The Scope Of Work Shall Include Necessary Curing, Preparing Of Surface, Disposing Off And Carting Away The Debris From The Banks Premises Etc Complete As Directed By The Banks Engineer. Approximate Dimensions Of Each Room: 4.5 M X 3.5 M. 3 3 Vitrified Tiles For Flooring: Refer To Item No. 3 In Annexure V - Schedule Of Quantities Of Part I. Basic Rate ( Exclusive Of Gst ) Of Tile - Rs 550 / - Per Sqm. 4 4 Vitrified Tiles Skirting Providing And Fixing 150 Mm High Vitrified Tiles Skirting Using 600Mm X 600 Mm Or Approved Equivalent Size, In Approved Pattern, Over The Plastered And Bordered Surface Set In Cement Slurry 1:3 ( 1 Cement : 3 Coarse Sand ) Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm In True Line Level Etc. Complete. Basic Rate ( Exclusive Of Gst ) Of Tile - Rs 550 / - Per Sqm. 5 5 Gypboard False Ceiling, Pop Cornice And Painting: Gypboard False Ceiling In Multiple Levels As Per Standard Specifications And Approved Design / Sample Including Providing Pop Cornice Of Approved Design And Painting And Making Necessary Openings For The Light Fixtures / Fittings, Etc. All Complete As Per The Technical Specifications Given At Section 7.5 ( V ) Of Part 1. Design As Per The Sample Done In Room No: 41 Approx Area Of The Room: 4.5 M X 3.5 M 6 6 Aluminium Window Type - I: Powder Coated 3 Track Aluminium Window With Tinted Glass And Ss Mosquito Proof Mesh Sliding Shutters And Acp Top Fixed Panels And Fixed Safety Grill And Providing Aluminium Frame Work And Cement Board To Facilitate Fixing Of Air Conditioner And Making Pelmet Provision For The Curtains Finishing The Wall Surface With Cement Plaster Ratio 1:4 On All The Sides Around The Removed Frame Area To Ensure Proper Line And Level As Per Approved Specifications. The Work Shall Be Done In Accordance With The Details Given In The Technical Specifications Given At Section 7.5 ( Vi ) Of Part 1 And The Line Diagram Given At Annexure Vii ( Fig-2 ) . Approximate Size Of Each Window Is 5X 6 ( Say 1.5 M X 1.8 M ) And The Finished Surface Of The Window Shall Be Considered For Measurement. 7 7 Aluminium Window Type - Ii: Powder Coated 3 Track Aluminium Window With Tinted Glass And Ss Mosquito Proof Mesh Sliding Shutters And Fixed Safety Grill Finishing The Wall Surface With Cement Plaster Ratio 1:4 On All The Sides Around The Removed Frame Area To Ensure Proper Line And Level As Per Approved Specifications. The Work Shall Be Done In Accordance With The Details Given In The Technical Specifications Given At Section 7.5 ( Vii ) Of Part 1 And The Line Diagram Given At Annexure Vii ( Fig-2 ) . Approximate Size Of Each Window Is 4Ft X 4Ft 6Inch ( Say 1.2 M X 1.35 M ) And The Finished Surface Of The Window Shall Be Considered For Measurement. 8 8 Door With Laminate On Both Sides I. Providing And Fixing 30Mm Thick Approved Make Flush Door Shutter With Necessary Hardwares Viz.. 3 Nos. Of Ss Hinges, 2 Nos. Of 100 Mm Ss Tower Bolts, Flat Edge Beading, 2 Nos. Of Door Handles, All Complete As Directed By Banks Engineer. ( Basic Price Of Door Shutter Rs. 130 / Sq.Ft Excluding Gst ) Ii. The Flush Door Shall Be Laminated With At Least 0.8 Mm Thick Laminate Of Approved Make And Shade To Suit The Suite The Interiors Of The Room Using Approved Make Adhesives Etc., All As Directed By Banks Engineer. ( Basic Price Of Laminate Rs. 45 / Sq.Ft Excluding Gst ) Iii. Rate Shall Be Inclusive Of Any Repairs Or Rectification To Be Done To The Existing Door Frames, Including Replacement Of Damaged Portion Of Wooden Frame Member To Bring All To Proper Line And Level. Approximate Size Of Each Bathroom Door Shutter: 0.65 M X 2.1 M Approximate Overall Size Of Each Bathroom Door: 0.75 M X 2.15 M. Note: Finished Area Shall Be Measured For Price Adjustment. 9 9 Painting [ Room Type - I ] Refer To Item No. 9 In Annexure V - Schedule Of Quantities Of Part I ( Rate To Be Quoted As Lumpsum Per Room ) 10 10 Painting [ Room Type - Ii ] Refer To Item No. 10 In Annexure V - Schedule Of Quantities Of Part I ( Rate To Be Quoted As Lumpsum Per Room )

Refer document

Refer document

Refer document