Annual Maintenance Contract For Non Mes Ssr Items 2021-22-2 Providing & Fixing Wall Paneling With Block Boards, Grade 2 Quality Interior Grade, Decorative Type With Decorated Face Veneer On One Face ( 19 / 20 Thick ) Also Including Door With All Fitt, MISHRA DHATU NIGAM LIMITED-Telangana

Annual Maintenance Contract For Non Mes Ssr Items 2021-22-2 Providing & Fixing Wall Paneling With Block Boards, Grade 2 Quality Interior Grade, Decorative Type With Decorated Face Veneer On One Face ( 19 / 20 Thick ) Also Including Door With All Fitting, Godrej Knob, Hinges, Tower Bolts. Fixed To Wooden Timber Framesoft Wood 2Nd Class 25 Mm Thick Planed One Side With Butt Joints And Fixed With Nuts / Screws Supplied And Fixed. Including Anti Termite Treatment To Wooden Timber Frame Complete. The Cost Also Includes The Cost Of Providing & Pasting 4Mm Teak Wood Veneer Including 2 Or 3 Coats Of Polishing, Complete As Per Instruction Of Engineer-In-Charge. 3 Providing & Painting Two To Threecoats Asian Tractor Emulsion Painting, Any Shade. The Cost Includes The Cost Of Surface Preparation With Single Coat Luppam, Single Coat Primer, Scaffolding Tools, Tackles Etc At All Heights & Levels As Per Instruction Of Engineer-In-Charge. ( Make Asian / Berger / Nerolac ) 4 Providing & Painting Two To Three Coats Ace Painting Including Surface Painting Any Shade , The Cost Includes Cost Of Surface Preparation, One Coat Primer, Scaffolding Tools, Tackles Etc At All Heights & Levels As Per Instruction Of Engineer-In-Charge. ( Make Asian / Berger / Nerolac ) 5 Providing And Fixing Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Including Cost And Conveyance Of All Materials To Site And All Operational , Incidental Labour Charges Etc, Complete For Finished Item Of Work As Per Instruction Of Engineer-In-Charge. 6 Providing And Fixing Health Faucet Of Model And Hindware Make As Specified In List Of Makes Complete As Per Instruction Of Engineer-In-Charge. 7 Providing And Fixing Cp Brass 2 Way Bib Tap Of Approved Quality And Hindwaremake, Conforming To Is Standards Etc All Complete As Per Standard Specifications And As Per Instruction Of Engineer-In-Charge. 8 Providing & Water Proofing Plaster In 20Mm Thick With 1St Coat Of 12Mm Thick In Rich Mortar C.M ( 1:6 ) & 2Nd Coat 8Mm Thick In Cm ( 1:4 ) In Terraces Including Void Sealing With Pressure Grouting With Proprietary Chemical Max At 20 Points At Every 0.6M To 1.0M Centre To Centre Both Ways Including Mixing Of Water Proofing Compound ( At All Heights & Levels And As Per Instruction Of Engineer-In-Charge. 9 Supply & Applying Specialized Polyurethane Sealant Treatment To The Terrace Cracks ( With A Guarantee Period Of 5 Years ) At All Heights & Levels As Per Instruction Of Engineer-In-Charge. 10 Supply & Applying Specialized Acrylic Elastomeric Liquid Membrane Water Proof Coating Treatment To External Walls At All Heights & Levels As Per Instruction Of Engineer-In-Charge. 11 Supply & Applying Specialized Acrylic Elastomeric Caulking Compound Treatment To Cracks Of Walls At Exterior Side At All Heights & Levels As Per Instruction Of Engineer-In-Charge. 12 Providing & Fixing Double Leaf Frameless Glazed Door With 12Mm Thick Toughened Glass, All Sides Edge Polished To Be Fixed On Patch Fittings Of The Approved Make. Cost Of The Door To Be Inclusive Of Pre-Approved Ozone Make Patch Fitting, Floor Spring, Patch Lock, Handles Of 32 X 1300 Matt Finish, Handles To Be Fitted Horizontally / Vertically As Per Instructions & Patch Fitting ( S ) Lock ( S ) , Etc., All Complete As Per Design & As Per Instruction Of Engineer-In-Charge. 13 Providing & Making Wooden Cupboards With 18Mm Water Proofed Pre-Laminated ( Both Sides ) Mdf Wood As Per Instructions Of Engineer-In- Charge. The Cost Includes Providing & Fixing All Hardware Like Handels, Hinges, Locks With Keys Etc As Per Instruction Of Engineer-In-Charge. 14 Providing & Fixing 150Mm Dia Pvc Drain From Existing Rain Water Gutter At Any Height & Level Connecting Ground Floor, Surface Drains Including Cost Of Scaffolding, Bends, End Shoe Etc. ( Repair Works ) As Per Instruction Of Engineer-In-Charge. 15 Providing & Fixing 150Mm Dia M.S Pipe ( Light Weight ) Connectingrain Water Gutter At Any Height & Level Connecting Surface Drain Including Cost Of Scaffolding, Making Bends, End Shoe Etc. & One Coat Of Primer & Two Coats Of Oil Paint ( Repair Works ) As Per Instruction Of Engineer-In-Charge. 16 Providing And Fixing Weld Mesh Partition Cum Door As Per Drawing. Weld Mesh Shall Be 50X25 Size, 3Mm Gti Wire And Frame Shall Be 50X50x6 Angle And Flats Of 40X6 Flat. Further, The Outer Frame Shall Be 65X65x6 Angle Fixed To Walls With Hold Fast Makeup Of 50X50x6 Angle. The Cost Includes The Cost Of Chipping Walls , Placing Hold Fast, Grouting With 1:2:4 Concrete, Finishing , Painting Etc. Also If Any Gap Between Angle Frame & Wall Crossing, The Same Shall Be Covered By Welding With 40X6 Flats And Filled With Cm Of Plastering Grade. The Cost Also Includes One Coat Of Red Oxide And Two Coats Of Silver Paint. The Door Shall Be Provided With Aldrop ( Including Type ) For Locking And Tower Bolt At Bottom , Cost Of Hinges, Welding To Main Frame. Weld Mesh Shutter Shall Be Made Up Of 50X50x6 Angle And 40X6 Flat, Weld Mesh Of 50X25 Aperture Size And Gauge Of 3Mm Etc., At All Heights & Levels And As Per Instruction Of Engineer-In-Charge. 17 Supply & Fixing 12Mm Toughened Glass With Square Aluminum Beading Including Cost Of Cutting, Fixing Wastage At All Heights & Levels As Per Instruction Of Engineer-In-Charge. 18 Providing & Fixing Of Vertical Fabric Venetion Blinds Made Of Glass Fiber Fabrics In Width 5 ( Or ) 4 Minimum Overlaping Of 3 / 4 In Fabric. . Top Aluminum Anodised Rail Of 1.4Mm Thickness. 2 Inch Wide Channel With Front Lamination Of Same Fabric. Runners Having Stainless Steel Hooks With Built-In-Shock Spring And Self Aligning Slip Clutch. End Control Box Composed Of Double Gear System. Stainless Steel Spacers. Bottom With Fully Plastic Covered Link Bead Chain As Per Manufacturers Specifications Complete As Per Instruction Of Engineer-In-Charge. 19 Supply & Fixing Of Stainless Steel Name Board ( 2Mm ) Guage With Wooden Frame And Deep Etching Works All Charges As Per Instruction Of Engineer-In-Charge. 20 Repairing Of Roof Sheets ( A.C Sheets ) At Any Height With Tightening Of Screws & Bolts, Including Supply & Application Of Tarplastic Around The Screws To Avoid Water Leakages Etc As Per Instruction Of Engineer-In-Charge. 21 Repairing Of Roof Sheets ( G.I. Sheets ) At Any Height With Tightening Of Screws & Bolts, Including Supply & Application Of Tarplastic Around The Screws To Avoid Water Leakages Etc As Per Instruction Of Engineer-In-Charge. 22 Labour Charges For Cutting, Modify, Welding And Fixing Of Structural Steel Like Angles, Plates, Channels, Beams Etc., Complete As Per Instruction Of Engineer-In-Charge. 23 Providing And Grouting With Non-Shrink Cementitious Grout Material In Required Size Of Pockets ( Fosroc Chemical: Conbextra Gp2 ) As Per The Manufactures Specification As Per Instruction Of Engineer-In-Charge. 24 Supply & Grouting With Specialized Grout Additives To The Roof Slab A ) Drilling The Holes 12Mm Or 14 Mm Dia To The Required Depth. B ) Fixing The Rubber Nozzles With Quick Setting Compound - Rapidstrong Qs ( Armstrong ) / Zorirapidar ( Pmcc ) / Power & Qk Set ( Ebt ) / Watershiled Qk Set Cement Putty As Per Directed By Eic. C ) Grouting Of Holes With 140 Psi Grout Pump With Cement Slurry Mixing With Specialized Free Flow, Non- Shrink Grout Additive- Rapidstrong Grout Admix / Zorigrout Gp1 / Power & Grout Admix ( Armstrong / Pmcc / ( Ebt ) / Watershield Ar+Cement As Per Instruction Of Engineer-In-Charge. 25 Providing And Fixing Of Roller Blinds ( Recon ) For Windows Complete As Per The Sizes At Site As Per Instruction Of Engineer-In-Charge.. 26 Providing And Fixing Of Wooden Partition Thick 50Mm Using Material 25Mm Thick New Wood Framework 2X2 Grid With 6Mm Plywood &1 Mm Laminate Both Side One Pinup Board With Fabric, Partition Top New Wood Binding And. Electrical Lines Partition Inside. Run Necessary Hardware Edge Finished With Melamine Polish Of Sizes ( As Per Drawing Specifications ) As Per Instruction Of Engineer-In-Charge. 27 Providing & Fixing Of Pvc Urinal Partition Of Size Fixing To The Wall With All Connected Fittings As Per Instruction Of Engineer-In-Charge. 28 Providing & Fixing Of 10 Mm Thick Toughened Glass Urinal Partition Fixing To The Wall Including Brackets Support Complete Etc As Per Instruction Of Engineer-In-Charge. 29 Providing & Fixing Of Aluminium Grills To The Existing Windows At All Levels & Height Complete As Per Instruction Of Engineer-In-Charge. 30 Supply & Fixing Of 6 Handle Lock Of Godrej Make As Per Instruction Of Engineer-In-Charge. 31 Removal, Repair & Refixing Of 2Mm Thick Powder Coated Aluminium Doors. The Cost Includes For Supply & Fixing Of Rubber Beading, Hinges, Door Locks, Door Stoppers Etc As Per Instruction Of Engineer-In-Charge. 32 Removal, Repair & Refixing Of 2Mm Thick Powder Coated Aluminium Windows. The Cost Includes Supply & Fixing Of Rubber Beading, Locks, Guiding Wheels Etc As Per Instruction Of Engineer-In-Charge. 33 Stainless Steel Letter: Providing And Fixing Stainless Steel Letters Made With 22 Gauge Thick Stainless Steel Sheet On Front And 24 Gauge Thick On Side Of The Letters Including Necessary Patentant Fixing Arrangement On Vitrified Tile / Acp To Complete. Rate Shall Be Inclusive Of Any Scaffolding Required For Fixing At Desired Location On The Elevation Special Wall On Se Corner Of The Building. Letter Upto 8 To 9 Height As Per Instruction Of Engineer-In-Charge. 34 Providing & Fixing Of 2Mm Thick Stainless Steel Name Board With 1Mm Gauge D.T.P Writing With Etching And Polishing Charges As Per Instruction Of Engineer-In-Charge. 35 Supply & Fixing Of 1Mm Thick Pvc Name Plate Of Required Size As Per Instruction Of Engineer-In-Charge. 36 Providing & Laying Of Machine Pressed Precast Concrete Interlocking Paver Blocks Of Any Colour Of Size: 200Mm X 200Mm X 60Mm Including Fining In Dust / Sand In Cm ( 1:3 ) , Levelling With Vibrator And Pcc ( 1:2:4 ) , Curbing To Hold Paver Blocks At End Etc., Complete As Per Instruction Of Engineer-In-Charge. 37 Labour Charges For Removal Of Steel Windows Of Approximate Area Max.2.5 Sq.M And Handover To The Civil Department Complete As Per Instruction Of Engineer-In-Charge. 38 Labour Charges For Removal Of Wooden Doors Of Approximate Area Max. 3 Sq.M And Handover To The Civil Department Complete As Per Instruction Of Engineer-In-Charge. 39 Providing & Fixing Staircase Railing Shall Be Made With Stainless Steel Seamless Tube Of Grade 304, Continuously Welded & Grinded Smooth Poluished Smooth / Rough, Bend / Curved At Turning As Per Design, Fixed / Welded With The Stainless Steel Balusters Complete. All Members Of Railing Shall Be Machine Cut, Machine Polished To Get The Best Finishin. The Balusters To Be Fixed With Floor / Wall As The Case May And Approved Size. Base Of The Baluster Shall Be Covered With 2Mm Thick Ss Covering As Per Design - Vertical Balusters & Horizontal Top Runners Of 50Mm Dia And Middle Runners ( 2 NoS ) Of 25Mm Dia As Per Drawing And As Directed Including Providing Single Horizontal Pipe Of 50Mm Dia With Necessary Clamping To The Side Wall As Per Instruction Of Engineer-In-Charge. 40 Supply & Fixing Of 1Mm Thick Laminate Sheet Of Approved Shade As Per Instruction Of Engineer-In-Charge. 41 Supply & Fixing Of 4Mm Thick Veneer Sheets Of Approved Shade As Per Instruction Of Engineer-In-Charge. 42 Supply & Fixing Of Mosquito Mesh To The Existing Windows Of Required Size As Per Instruction Of Engineer-In-Charge. 43 Providing & Fixing Of Display Cupboards With Marine Plywood Of 19 / 20Mm Thick And 5Mm Glass Shutters On Front Face Of Cupboard As Per Instruction Of Engineer-In-Charge. 44 Supply & Fixing Of False Ceiling Decorative Borders With Plaster Of Paris Material. The Cost Includes Surface Preparation With One Coat Of Primer And Two Or Three Coats Of Obd Painting As Per Instruction Of Engineer-In-Charge. 45 Supply And Fixing In Position Powder Coated Aluminum Fully Glazed Windows Of Approved Colour Using Aluminum 3 Track Box Section Frame With Top And Vertical Sides And For Frame Bottom Using Sliding Shutters Made Out Of Aluminum Sections, Inside The H-Section For Top And Bottom And Plain Section For Ends Including Making Window Weathering Seal Proof And Mounted In Fiber Wheels 2 Nos For Each Shutter And Fixed 5 Mm Thick Plain Black Tilted Glass Of 1St Quality With Necessary Pvc Rubber Beading Alround Including Providing 2 Nos Maruti Lock Cleat For Window With 7.5Mm Thick Aluminum Grillas Approved By The Department @ 3.58 / Kg / M2 And Separate Mosquito Mesh Frame At The Back Side Of The Window Including Cost And Conveyance Of All Materials, Labour Charges For Making, Erecting In Position Etc., . Gaps Between Wall And Al Frame Shall Be Closed With White Cement, Where Ever Required Complete As Per Instruction Of E.I.C. 46 Supply And Fixing In Position Powder Coated Aluminum Fully Glazed Windows Of Approved Colour Using Aluminum 2 Track Box Section Frame With Top And Vertical Sides And For Frame Bottom Using Sliding Shutters Made Out Of Aluminum Sections, Inside The H-Section For Top And Bottom And Plain Section For Ends Including Making Window Weathering Seal Proof And Mounted In Fiber Wheels 2 Nos For Each Shutter And Fixed 5 Mm Thick Plain Float Glass 1St Quality With Necessary Pvc Rubber Beading Alround Including Providing 2 Nos Maruti Lock Cleat For Window With 7.5Mm Thick Aluminum Grill As Approved By The Department @ 3.58 / Kg / M2 Including Cost And Conveyance Of All Materials, Labour Charges For Making, Erecting In Position Etc., . Gaps Between Wall And Al Frame Shall Be Closed With White Cement, Where Ever Required Complete. 47 Providing And Fixing Of 2Mm Thick Aluminum Powder Coated Partitions Cum Doors With Half Novapan 12Mm Thick And 5Mm Clear Glass / Opaque Glass Including Neoprene Gasket Complete Etc..With Standard Sections. The Cost Includes Closing Gaps Between Wall & Aluminum Section With White Cement Or Aluminum Angles As Required At Site ( If Any ) As Per The Direction Of Engineer-In-Charge. 48 Providing & Fixing Of M.S Doors ( Double Leaf ) Made Up Of 3Mm Sheet And Frame Made Up Of Ismc 75, Isa 50X50x 6 Angle & 3Mm Gusset Plates At Junction & Corners. Cost Also Includes All Fittings- Handles, Aldrop For Locking Tower Bolt, Hinges, Hold Fasts. It Also Includes Cost Of One Coat Red Oxide & Two Coats Of Synthetic Enamel Paint, At All Heights & Levels And As Per Instruction Of Engineer-In-Charge. 49 Providing And Fixing Low Height Wooden Partition Thick 50 Mm Using Material25 Mm Thick New Woodframework 2X2grid With 6 Mm Plywood & 1 Mm Laminate Both Side One Pinup Board With Fabric, Partition Top New Wood Binding And. Electrical Lines Partition Inside. Run Necessary Hardwareedge Finished With Melaminepolish Of Sizes, Complete As Per Instruction Of E.I.C. 50 Repair Of Rolling Shutters Complete ( Spares Shall Be Supplied By Midhani ) 51 Removal, Repair & Refixing Of Powder Coated Aluminium Doors. The Cost Includes For Supply & Fixing Of Rubber Beading, Hinges, Door Locks, Door Stoppers Etc, As Per Instruction Of E.I.C. 52 Module-Ii 53 Supply / Hiring Of Dumper ( 100 Cft ) Trucks Including Diesel And Distance Of Dumping Upto 750 Mtr Lead ( Per Day Means 7.00 Hrs Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) 54 Supply / Hiring Of Dumper Trucks ( 300Cft ) Including Diesel And Distance Of Dumping Upto 750 Mtr Lead ( Per Day Means 7.00 Hrs Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) 55 Supply / Hiring Of Dumper Trucks ( 500 Cft ) Including Diesel And Distance Of Dumping Upto 750 Mtr Lead ( Per Day Means 7.00 Hrs Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) 56 Supply / Hiring Of Tractor ( 100 Cft ) Including Diesel And Distance Of Dumping Upto 750 Mtr Lead ( Per Day Means 7.00 Hrs Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) 57 Supply / Hiring Of Tractor Compressor Breaker Along With Operator Including Diesel And Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) . 58 Supply / Hiring Of Electrical Chipping Machine Along With Operator Including Diesel And Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) . 59 Supply / Hiring Of Road Roller Along With Operator Including Diesel And Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) . 60 Supply / Hiring Of Dozer ( Tractor ) Along With Operator Including Diesel And Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) . 61 Supply / Hiring Of Hitachi Pc 200 Including Diesel And Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) . 62 Supply / Hiring Of Front Loader ( Jcb ) Including Diesel And Excluding The Breakdown Hours Viz. Machine, Lunch / Tea Breaks Etc ) .

Refer document

Refer document

INR 15 Lakhs /-

Name of Work: AMC FOR NON MES SSR ITEMS 2021-22 Contractor has to quote overall price including (rate + taxes + GST + Cess), the accuracy shall be up to two decimals.

Sl. No.	Item Description
1	MODULE-I
2	Providing & fixing wall paneling with block boards, grade 2 quality interior grade, decorative type with decorated face veneer on one face (19/20 thick) also including door with all fitting, godrej knob, hinges, tower bolts. Fixed to wooden timber framesoft wood 2nd class 25 mm thick planed one side with butt joints and fixed with nuts/screws supplied and fixed. Including Anti termite treatment to wooden timber frame complete. The cost also includes the cost of Providing & Pasting 4mm Teak wood veneer including 2 or 3 coats of polishing, complete as per instruction of Engineer-in-Charge.
3	Providing & Painting two to threecoats Asian tractor emulsion painting, any shade. The cost includes the cost of surface preparation with single coat luppam, single coat primer, scaffolding tools, tackles etc at all heights & levels as per instruction of Engineer-in-Charge.(Make Asian/Berger/Nerolac)
4	Providing & Painting two to three coats ACE painting including surface painting any shade ,the cost includes cost of surface preparation, one coat primer, scaffolding tools, tackles etc at all heights & levels as per instruction of Engineer-in-Charge.(Make Asian/Berger/Nerolac)
5	Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including cost and conveyance of all materials to site and all operational ,incidental labour charges etc, complete for finished item of work as per instruction of Engineer-in-Charge.
6	Providing and fixing health faucet of model and Hindware make as specified in list of makes complete as per instruction of Engineer-in-Charge.
7	Providing and fixing CP Brass 2 way Bib Tap of approved quality and Hindwaremake, conforming to IS standards etc all complete as per standard specifications and as per instruction of Engineer-in-Charge.
8	Providing & Water proofing plaster in 20mm thick with 1st coat of 12mm thick in rich mortar C.M(1:6)& 2nd coat 8mm thick in CM(1:4) in terraces including void sealing with pressure grouting with proprietary chemical max at 20 points at every 0.6m to 1.0m centre to centre both ways including mixing of water proofing compound( at all heights & levels and as per instruction of Engineer-in-Charge.
9	Supply & Applying Specialized Polyurethane Sealant Treatment to the terrace cracks (with a guarantee period of 5 years)at all heights & levels as per instruction of Engineer-in-Charge.
10	Supply & Applying Specialized acrylic elastomeric liquid membrane water proof coating treatment to external walls at all heights & levels as per instruction of Engineer-in-Charge.
11	Supply & Applying Specialized acrylic elastomeric caulking compound treatment to cracks of walls at exterior side at all heights & levels as per instruction of Engineer-in-Charge.
12	Providing & fixing double leaf frameless glazed door with 12mm thick TOUGHENED glass, all sides edge polished to be fixed on patch fittings of the approved make. Cost of the door to be inclusive of pre-approved ozone make patch fitting, floor spring, patch lock, handles of 32 x 1300 matt finish, handles to be fitted horizontally / vertically as per instructions & patch fitting(s) lock(s), etc., all complete as per design & as per instruction of Engineer-in-Charge.
13	Providing & making wooden cupboards with 18mm water proofed pre-laminated (both sides) MDF wood as per instructions of Engineer-in- Charge. The cost includes providing & Fixing all hardware like Handels, hinges, locks with keys etc as per instruction of Engineer-in-Charge.
14	Providing & Fixing 150mm dia PVC drain from existing rain water gutter at any height & level connecting Ground floor, surface drains including cost of scaffolding, bends, end shoe etc. (repair works) as per instruction of Engineer-in-Charge.
15	Providing & Fixing 150mm dia M.S pipe (light weight) connectingrain water gutter at any height & level connecting surface drain including cost of scaffolding, making bends, end shoe etc. & one coat of primer & two coats of oil paint (repair works) as per instruction of Engineer-in-Charge.
16	Providing and fixing weld mesh partition cum door as per drawing. Weld mesh shall be 50x25 size, 3mm GTI wire and frame shall be 50x50x6 angle and flats of 40x6 flat. Further, the outer frame shall be 65x65x6 angle fixed to walls with hold fast makeup of 50x50x6 angle. The cost includes the cost of chipping walls , placing hold fast, grouting with 1:2:4 concrete, finishing , painting etc. also if any gap between angle frame & wall crossing, the same shall be covered by welding with 40x6 flats and filled with CM of plastering grade. The cost also includes one coat of red oxide and two coats of silver paint. The door shall be provided with aldrop (including type) for locking and tower bolt at bottom , cost of hinges, welding to main frame. Weld mesh shutter shall be made up of 50x50x6 angle and 40x6 flat, weld mesh of 50x25 aperture size and gauge of 3mm etc., at all heights & levels and as per instruction of Engineer-in-Charge.
17	Supply & Fixing 12mm Toughened glass with Square Aluminum beading including cost of cutting, fixing wastage at all heights & Levels as per instruction of Engineer-in-Charge.
18	Providing & fixing of vertical fabric venetion blinds made of glass fiber fabrics in width 5"(or)4" minimum overlaping of 3/4" in fabric. . Top aluminum anodised rail of 1.4mm thickness. 2 inch wide channel with front lamination of same fabric. runners having stainless steel hooks with built-in-shock spring and self aligning slip clutch. end control box composed of double gear system. stainless steel spacers. bottom with fully plastic covered link bead chain as per manufacturers specifications complete as per instruction of Engineer-in-Charge.
19	Supply & fixing of Stainless steel name board (2mm) guage with wooden frame and deep etching works all charges as per instruction of Engineer-in-Charge.
20	Repairing of Roof sheets (A.C Sheets) at any height with tightening of screws & bolts, including supply & application of tarplastic around the screws to avoid water leakages etc as per instruction of Engineer-in-Charge.
21	Repairing of Roof sheets (G.I. Sheets) at any height with tightening of screws & bolts, including supply & application of tarplastic around the screws to avoid water leakages etc as per instruction of Engineer-in-Charge.
22	Labour charges for cutting, modify, welding and fixing of Structural steel like Angles, Plates, Channels, Beams etc., complete as per instruction of Engineer-in-Charge.
23	Providing and grouting with non-shrink cementitious grout material in required size of pockets (Fosroc chemical: Conbextra GP2) as per the manufactures specification as per instruction of Engineer-in-Charge.
24	Supply & Grouting with specialized grout additives to the roof slab a) Drilling the holes 12mm or 14 mm dia to the required depth. b) Fixing the rubber nozzles with quick setting compound - RAPIDSTRONG QS (Armstrong)/ ZORIRAPIDAR (PMCC)/ POWER & QK SET (EBT)/ WATERSHILED QK SET cement putty as per directed by EIC. c) Grouting of holes with 140 PSI grout pump with cement slurry mixing with specialized free flow, Non- shrink grout additive- RAPIDSTRONG GROUT ADMIX / ZORIGROUT GP1/ POWER & GROUT ADMIX (ARMSTRONG/ PMCC/ (EBT)/WATERSHIELD AR+Cement as per instruction of Engineer-in-Charge.
25	Providing and fixing of roller blinds (recon) for windows complete as per the sizes at site as per instruction of Engineer-in-Charge..
26	Providing and fixing of wooden partition thick 50mm using material 25mm thick New wood framework 2x2 grid with 6mm plywood &1 mm laminate both side one pinup board with fabric, partition top new wood binding and. Electrical lines partition inside. Run necessary hardware edge finished with melamine polish of sizes (As per drawing specifications) as per instruction of Engineer-in-Charge.
27	Providing & fixing of PVC urinal partition of size fixing to the wall with all connected fittings as per instruction of Engineer-in-Charge.
28	Providing & fixing of 10 mm thick toughened glass urinal partition fixing to the wall including brackets support complete etc as per instruction of Engineer-in-Charge.
29	Providing & fixing of Aluminium grills to the existing windows at all levels & height complete as per instruction of Engineer-in-Charge.
30	Supply & fixing of 6" Handle lock of Godrej make as per instruction of Engineer-in-Charge.
31	Removal, repair & refixing of 2mm thick powder coated Aluminium doors. The cost includes for supply & fixing of rubber beading, hinges, door locks, door stoppers etc as per instruction of Engineer-in-Charge.
32	Removal, repair & refixing of 2mm thick powder coated Aluminium windows. The cost includes supply & fixing of rubber beading, locks, guiding wheels etc as per instruction of Engineer-in-Charge.
33	Stainless Steel Letter: Providing and fixing Stainless Steel letters made with 22 gauge thick Stainless Steel sheet on front and 24 gauge thick on side of the letters including necessary patentant fixing arrangement on vitrified tile / ACP to complete. Rate shall be inclusive of any scaffolding required for fixing at desired location on the Elevation Special Wall on SE Corner of the building. Letter upto 8" to 9" height as per instruction of Engineer-in-Charge.
34	Providing & fixing of 2mm thick stainless steel name board with 1mm gauge D.T.P writing with etching and polishing charges as per instruction of Engineer-in-Charge.
35	Supply & fixing of 1mm thick PVC Name plate of required size as per instruction of Engineer-in-Charge.
36	Providing & Laying of machine pressed precast concrete interlocking paver blocks of any colour of size: 200mm X 200mm x 60mm including fining in dust / sand in CM (1:3), levelling with vibrator and PCC (1:2:4), curbing to hold paver blocks at end etc., complete as per instruction of Engineer-in-Charge.
37	Labour charges for removal of Steel windows of approximate area max.2.5 sq.m and handover to the civil department complete as per instruction of Engineer-in-Charge.
38	Labour charges for removal of wooden doors of approximate area max. 3 sq.m and handover to the civil department complete as per instruction of Engineer-in-Charge.
39	Providing & fixing staircase railing shall be made with stainless steel seamless tube of grade 304, continuously welded & grinded smooth poluished smooth / rough, bend / curved at turning as per design, fixed / welded with the stainless steel balusters complete. All members of railing shall be machine cut, machine polished to get the best finishin. The balusters to be fixed with floor / wall as the case may and approved size. base of the baluster shall be covered with 2mm thick SS covering as per design - vertical balusters & horizontal top runners of 50mm dia and middle runners (2 No"s) of 25mm dia as per drawing and as directed including providing single horizontal pipe of 50mm dia with necessary clamping to the side wall as per instruction of Engineer-in-Charge.
40	Supply & fixing of 1mm thick laminate sheet of approved shade as per instruction of Engineer-in-Charge.
41	Supply & fixing of 4mm thick veneer sheets of approved shade as per instruction of Engineer-in-Charge.
42	Supply & fixing of Mosquito Mesh to the existing windows of required size as per instruction of Engineer-in-Charge.
43	Providing & fixing of Display cupboards with marine plywood of 19/20mm thick and 5mm glass shutters on front face of cupboard as per instruction of Engineer-in-Charge.
44	Supply & fixing of False ceiling decorative borders with plaster of paris material. The cost includes surface preparation with one coat of primer and two or three coats of OBD painting as per instruction of Engineer-in-Charge.
45	Supply and fixing in position powder coated aluminum fully glazed windows of approved colour using Aluminum 3 track box section frame with top and vertical sides and for frame bottom using sliding shutters made out of aluminum sections, inside the h-section for top and bottom and plain section for ends including making window weathering seal proof and mounted in fiber wheels 2 nos for each shutter and fixed 5 mm thick plain black tilted glass of 1st quality with necessary PVC rubber beading alround including providing 2 nos maruti lock cleat for window with 7.5mm thick aluminum grillas approved by the department @ 3.58/kg/m2 and separate mosquito mesh frame at the back side of the window including cost and conveyance of all materials, labour charges for making, erecting in position etc., . gaps between wall and Al frame shall be closed with white cement, where ever required complete as per instruction of E.I.C.
46	Supply and fixing in position powder coated aluminum fully glazed windows of approved colour using Aluminum 2 track box section frame with top and vertical sides and for frame bottom using sliding shutters made out of aluminum sections, inside the h-section for top and bottom and plain section for ends including making window weathering seal proof and mounted in fiber wheels 2 nos for each shutter and fixed 5 mm thick plain float glass 1st quality with necessary PVC rubber beading alround including providing 2 nos maruti lock cleat for window with 7.5mm thick aluminum grill as approved by the department @ 3.58/kg/m2 including cost and conveyance of all materials, labour charges for making, erecting in position etc., . gaps between wall and Al frame shall be closed with white cement, where ever required complete.
47	Providing and fixing of 2mm thick aluminum powder coated partitions cum doors with half novapan 12mm thick and 5mm clear glass/opaque glass including neoprene gasket complete etc..with standard sections. The cost includes closing gaps between wall & aluminum section with white cement or Aluminum angles as required at site (if any) as per the direction of Engineer-In-Charge.
48	Providing & fixing of M.S Doors (double leaf) made up of 3mm sheet and frame made up of ISMC 75, ISA 50X50X 6 angle & 3mm gusset plates at junction & corners. Cost also includes all fittings- handles, aldrop for locking tower bolt, hinges, hold fasts. It also includes cost of one coat red oxide & two coats of synthetic enamel paint, at all heights & levels and as per instruction of Engineer-in-Charge.
49	Providing and fixing low height wooden partition thick 50 mm using material25 mm thick New woodframework 2x2grid with 6 mm plywood & 1 mm laminate both side one pinup board with fabric, partition top new wood binding and. Electrical lines partition inside. run necessary hardwareedge finished with melaminepolish of sizes, complete as per instruction of E.I.C.
50	Repair of rolling shutters complete (spares shall be supplied by MIDHANI)
51	Removal, repair & refixing of powder coated Aluminium doors. The cost includes for supply & fixing of rubber beading, hinges, door locks, door stoppers etc, as per instruction of E.I.C.
52	MODULE-II
53	Supply/Hiring of Dumper (100 cft ) trucks including diesel and distance of dumping upto 750 mtr lead (per day means 7.00 hrs excluding the breakdown hours viz. machine, lunch/tea breaks etc)
54	Supply/Hiring of Dumper trucks (300cft) including diesel and distance of dumping upto 750 mtr lead(per day means 7.00 hrs excluding the breakdown hours viz. machine, lunch/tea breaks etc)
55	Supply/Hiring of Dumper trucks (500 cft) including diesel and distance of dumping upto 750 mtr lead(per day means 7.00 hrs excluding the breakdown hours viz. machine, lunch/tea breaks etc)
56	Supply/Hiring of Tractor (100 cft) including diesel and distance of dumping upto 750 mtr lead (per day means 7.00 hrs excluding the breakdown hours viz. machine, lunch/tea breaks etc)
57	Supply/Hiring of Tractor compressor breaker along with operator including diesel and excluding the breakdown hours viz. machine, lunch/tea breaks etc).
58	Supply/Hiring of Electrical chipping machine along with operator including diesel and excluding the breakdown hours viz. machine, lunch/tea breaks etc).
59	Supply/Hiring of Road roller along with operator including diesel and excluding the breakdown hours viz. machine, lunch/tea breaks etc).
60	Supply/Hiring of Dozer (Tractor) along with operator including diesel and excluding the breakdown hours viz. machine, lunch/tea breaks etc).
61	Supply/Hiring of Hitachi PC 200 including diesel and excluding the breakdown hours viz. machine, lunch/tea breaks etc).
62	Supply/Hiring of front loader (JCB) including diesel and excluding the breakdown hours viz. machine, lunch/tea breaks etc).