Military Engineer Services-MES has published Provn Of Temp Store For Swo Iron Grill For Doors And Windows In Seo Tcr Flm Office Automatic Timer In Immols Server Room Emergency Alarm And False Ceiling With Led Light In Ops Room At Sonegaon Nagpur Provn Of Temp Store For Swo Iron Grill For Doors And . Submission Date for this Tender is 02-10-2021. LED Light Tenders in Sonegaon, Nagpur Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-10-2021 |
| Sl. No. | Item Description |
| 1 | Excavation over areas in soft/ loose soil n. exc. 1.50m deep and getting out complete all as specified and directed. |
| 2 | Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed. |
| 3 | Removing excavated soilexceeding 250m and not exceeding 500m and depositing where directed complete all as specified and directed. |
| 4 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 5 | Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed. |
| 6 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 7 | M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm,deposited, spred and levelled in layer not exceeding 15cm thick, watered and rammed to true surface complete all as specified and as directed. |
| 8 | Supply, lay / spread in trenches clean dry sandto required width and depth at bottom and top of cable includingspreading, levelling, punning for laying/ cushioning of cable all as specified and as directed. Note : Punned thickness only will be considered or payment. |
| 9 | Supply and lay burnt Bricks, old size, sub class "B", laid flat adjacent to each other, perpendicular to cable with width equal to length in trenches for protection of cable all as specified and as directed |
| 10 | M&L for PCC 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and as directed. |
| 11 | M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 all as specified and as directed. |
| 12 | M&L for providing RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 13 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified. |
| 14 | S&F 2nd class hardwood plain framed panelled shutters 35mm thick, (one panel) without interlocking rail and 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS: 1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and as directed. |
| 15 | S&F mild steel butt hinge, medium weight cold rolled 100mm size all as specified and directed. |
| 16 | S&F in extruded aluminium alloy handle cast type anodised 150mm size all as specified and directed. |
| 17 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed. |
| 18 | S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 19 | S&F 2nd class hardwood glazed and skeleton door shutters 35mm thickopen rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and directed. |
| 20 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 21 | M&L for mild steel TMT bars 5mm dia and overup to and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed. |
| 22 | S&F rolled mild steel framed work as in as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-w (Gde-E-250)quality Bcomplete all as specified and directed. |
| 23 | S&F125X60mm Pressed steel frames for doors with double rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed. |
| 24 | M&L MS work in bands, straps, supports or stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills, bolts and similar items conforming to FE-290, Gde E 165, complete all as specified and directed. |
| 25 | S&F rolled mild steel framed work as Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. Fe- 290 E-165 complete all as specified and directed. |
| 26 | M&L for Mild steel framed work such as gates and grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290, Gde E-165 all as specified and as directed. |
| 27 | S&F steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed. |
| 28 | All as per Item No 27 here in before but with glazing bars |
| 29 | S&F galvanised mild steel wirecloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 30 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ chajja, fixed with self tapping screws as per manufacturer’sinstructionall as specified and directed. |
| 31 | S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ cladding to wall fixed with self tapping screws as per manufacturer’sinstruction complete all as specified and directed. |
| 32 | S&F anodised aluminium snap grid size of grid 605mm X 605mm framework for false ceiling including GI suspenders/ hangers fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc. complete all as specified and directed. Note:- Cost of making frame work for light fitting, grill diffusers, cutouts etc is deemed to be incl in the quoted rate. |
| 33 | M&L providing 12mm thick gypsum board as in false ceiling fixed with screws as per manufacturer"s instruction complete all as specified and directed. |
| 34 | M&L for 100mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring all as specified and as directed. |
| 35 | M&L for providing 100mm thick PCC 1:2:4, type B1, using 20mm graded crushed stone aggregate asinfloors andfinished the surface even and smooth without using extra cement all as specified and as directed. |
| 36 | M&L 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished even and fair complete all as specified and directed. |
| 37 | M&L rendering 15mm thick in cement mortar (1:4) mixed on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed. |
| 38 | M&L rendering 15mm thick in cement mortar (1:6) mixed on fair faces of brick/ concrete surface and the surface finished even and smooth without using extra cement complete all as specified and directed. |
| 39 | Supply and Fix sheet glass 3mm thick plain, ordinary quality and glazing with oil putty /wooden beads as directed in squares n.exc 0.50 sqm in each pane all as specified and directed. |
| 40 | M&L preparation of new wooden or wood based surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 41 | M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 42 | M&L preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 43 | M&L for applying two coats of oil bound distemper over a coat of primer and including a coat of 2 to 3mm thick Birla /Asian wall care putty complete all as specified and directed. |
| 44 | Material and labour for applying two coats of white wash on walls including preparation of newly plastered surfaces all as specified and as directed. |
| 45 | Supplying & laying GI Tubing 40 mm dia Light grade pipe with connecting acessories complete in trench for road andon surface/,wall for protection complete all as specified and directed. |
| 46 | Supply and lay in trenches/drawn through pipes or in road crossings / paths/ drains / ducts / floors / along poles / equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 10 Sqmm 2 core including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately. |
| 47 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15mm bore light grade connected upto switch board including 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No. 3 of MES Schedule Part I including dearth chamber of PCC (1:2:4) type B-1 using 20mm grade aggregate with 40mm thick RCC cover slab (1:1½:3) type A-0 using 12.5mm graded stone aggregate reinforced with 8mm dia TMT bars @ 100mm c/c both ways and 6mm dia MS lifting hooks including testing on completion complete all as specified and as directed. |
| 48 | M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral)copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/ floor and fixed on ceiling/ roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top coverfixed withcadmium plated screws forhousing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:- |
| 49 | One light/ fan/ exhaust fan point controlled by one switch. |
| 50 | One 3 pin switch socket outlet, 5amps on independent board controlled by one switch. |
| 51 | M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral)copper conductor FR & LS grade cable of 1100V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top coverfixed withcadmium plated screws forhousing the switch sockets, outlets, fan regulator etc including provn of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specifiedfor 5 Pin 15 Amp switch socket combination on Independent board complete all as specified and directed. |
| 52 | Supply and fix switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed. |
| 53 | Supply and fix ceiling rose PVC/ Polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed. |
| 54 | Supply and fix switch socket combination 3 PIN, 6 Amps, flush type, 230 volts all as specified and directed. |
| 55 | Supply and fix Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal all as specified and directed. |
| 56 | S&Fstepped type electronic ceiling fan regulator AC, 240V, 50Hz, single phase all as specified and as directed. |
| 57 | S & F Ceiling fans, complete with three blade, down rod, accessories 230 V , 1200 mm sweep, with squirrel cage induction motor complete all as specified and as directed. |
| 58 | Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 240 Volts, single door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately. |
| 59 | Supply, fix, connecting and testing MCB single pole (MCB SPN), 32Amps, 240 volts of rupturing capacity 10kA, C curve typecomplete all as specified and directed. |
| 60 | Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32Amps, 240 volts of rupturing capacity 10kA, C curve typecomplete all as specified and directed. |
| 61 | S& F wall mounting fan of 400mm sweep, single phase 230V AC oscillating type ,variable speed, connecting the fan to ceiling rose incl provn of flexible copper cable complete all as specified and directed. Make-: CG model-SS torm2 or its equivalent make in Almonard/Havells |
| 62 | Supply and fix LED tube light fittingcapacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector complete rewiredwith multistranded copper cable & connecting to ceiling rose with3 core ,multistrandedflexible copper cable complete all as specified & directed. Make CGCta No-LDL-20-NW or its equivalent make in wipro/CG/Havells/philips /Bajaj. |
| 63 | S & F 36WattRecessed LEDperforated Single Window modern Designed enabled by advanced LED light.It blandes into ceiling plane &maintain Uniform luminance across aperture to enhance visual comfortceiling tile provided with a drop down acrylic diffuser suitable for 600X600 MM ceiling including extra frame for fixing at POP/ Gypsum Ceiling mounted version including LED light complete.The 36W system shall be operating at 220-240v AC supply having internal driver.IP20, surge protection 2KV, ambient temperature (-) 20 to 45 degree C, frequency 50 to 60 Hz. .PF should be greater than 0.95, THD < 10%.Individual LED"s should not be visible for glare free output,and connection up to tube light fitting with connecting up with copper 3 core flexible cord of minimum 1.5 Sqmm size and testing complete, all as specified and as directed Make : CG LCTLSN-36-CDL or its equivalent makein Havells , Wipro. |
| 64 | S& F Twin AC Controller suitable for 1.5TR AC"s 2Nos 230V AC ,Power Relays & with trip setting under 120-210 V & Over 240- 300V ,Over Load 5-20 Amp settableby Keys & display(default set-20A,current & Room temp DisplayCyclic Time delay 3Min to 24hrswith 2No contacts complete all as specified and as directed. |
| 65 | M & L road cutting of size 30 cm width x 45 cm depth for laying of cables including making good the road with necessaryreturning filling and bituminious portion with concrete and bituminious mixture and cemented portion with PCC in 1:2:4 , 15 cm thick from top and matching the surfaces with existing complete all as specified and directed. |
| 66 | Supply and lay in trenches/drawn through pipes or in road crossings / paths/ drains / ducts / floors / along poles / equipments etc., of LT cable under ground, XLPE insulated, screened, PVC bedded, galvanised strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 6 Sqmm 2 core including connecting up using suitable size aluminium lugs testing and commissioning complete all as specified and as directed. Note : Excavation earth work, sand cushioning and brick protection shall be measured and paid separately. |
| 67 | Supplying & laying GI Tubing 25 mm dia Light grade pipe with connecting acessories complete in trench for road andon surface/,wall for protection complete all as specified and directed. |
| 68 | Supply and fix bell push, flush type, single pole, 5 Amps, AC, 240 volts all as specified and directed. |
| 69 | Supply and fix electric bell, multi music type, single pole, AC, 230 volts all as specified and directed. |
| 70 | Supply, fix, connecting and testing factory made sheet metal enclosure DB, SPN, 2 way, 240 Volts, single door, semi concealed type with necessary connection with incoming slot for MCCB as incomer complete all as directed. |
| 71 | Supply, fix, connecting and testing isolator DP, 40 Amps, 240 volts AC with necessary connection in existing panel/ DB box complete all as specified and directed. |
| 72 | Material and labour for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, including supply and fixing 20mm dia PVC conduit concealed withalljoint , elbow, Tee Junction and Bend with necessary chess cutting and filling with cement mortor etc,alongwith one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. Note : Two runs of 4.0sqmm multistranded cable and one run of4.0sqmm cable as earth continuity conductor shall be considered as one unit length. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
