}

Bids Are Invited For Cot 6X3 - • Height Of The Sleeping Area From Ground Should Be 18 Inches.• Head Rest From The Sleeping Area Should Be Minimum 10 Inches.• Foot Rest From The Sleeping Area Should Be 3.5 Inches.• Cot Should Be Manufactured Through Mig We-Karnataka

Department Of Sports-DOS has published Bids Are Invited For Cot 6X3 - • Height Of The Sleeping Area From Ground Should Be 18 Inches.• Head Rest From The Sleeping Area Should Be Minimum 10 Inches.• Foot Rest From The Sleeping Area Should Be 3.5 Inches.• Cot Should Be Manufactured Through Mig We. Submission Date for this Tender is 27-09-2021. Miscellaneous Finishes Tenders in Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

29259176
Bids Are Invited For Cot 6X3 - • Height Of The Sleeping Area From Ground Should Be 18 Inches.• Head Rest From The Sleeping Area Should Be Minimum 10 Inches.• Foot Rest From The Sleeping Area Should Be 3.5 Inches.• Cot Should Be Manufactured Through Mig We
Open Tender
Indian
Karnataka
27-09-2021

Tender Details

Bids Are Invited For Cot 6X3 - • Height Of The Sleeping Area From Ground Should Be 18 Inches.• Head Rest From The Sleeping Area Should Be Minimum 10 Inches.• Foot Rest From The Sleeping Area Should Be 3.5 Inches.• Cot Should Be Manufactured Through Mig Welding.• Cot Frame Should Be Manufactured Using 60><40 Tube And Supporting Frame Should Be 30X30 Tube, 16 Gauge Only.• 18 Mm Plywood ( Kitply / Century ) • Branding At Footrest And Headrest Using Pre-Laminated Board.• Should Be Powder Coated.• Heavy Duty Bushes To Be Used , Cot6.5X3 - • Height Of The Sleeping Area From Ground Should Be 18 Inches.• Head Rest From The Sleeping Area Should Be Minimum 10 Inches.• Foot Rest From The Sleeping Area Should Be 3.5 Inches.• Cot Should Be Manufactured Through Mig Welding.• Cot Frame Should Be Manufactured Using 60><40 Tube And Supporting Frame Should Be 30X30 Tube, 16 Gauge Only.• 18 Mm Plywood ( Kitply / Century ) • Branding At Footrest And Headrest Using Pre-Laminated Board.• Should Be Powder Coated.• Heavy Duty Bushes To Be Used , Cot 7X3.5 - • Height Of The Sleeping Area From Ground Should Be 18 Inches.• Head Rest From The Sleeping Area Should Be Minimum 10 Inches.• Foot Rest From The Sleeping Area Should Be 3.5 Inches.• Cot Should Be Manufactured Through Mig Welding.• Cot Frame Should Be Manufactured Using 60><40 Tube And Supporting Frame Should Be 30X30 Tube, 16 Gauge Only.• 18 Mm Plywood ( Kitply / Century ) • Branding At Footrest And Headrest Using Pre-Laminated Board.• Should Be Powder Coated.• Heavy Duty Bushes To Be Used Total Quantity : 1

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 24 Lakhs /-

BOQ Items

Sl. No. Item TitleItem Description
1Cot 6X3• Height of the sleeping area from Ground should be 18 Inches. • Head rest from the sleeping area should be minimum 10 Inches. • Foot rest from the sleeping area should be 3.5 Inches. • Cot should be manufactured through MIG welding. • Cot frame should be manufactured using 60><40 tube and supporting frame should be 30x30 tube, 16 gauge only. • 18 MM Plywood (KITPLY/CENTURY) • Branding at footrest and headrest using Pre-Laminated board. • Should be powder coated. • Heavy duty bushes to be used
2COT6.5X3• Height of the sleeping area from Ground should be 18 Inches. • Head rest from the sleeping area should be minimum 10 Inches. • Foot rest from the sleeping area should be 3.5 Inches. • Cot should be manufactured through MIG welding. • Cot frame should be manufactured using 60><40 tube and supporting frame should be 30x30 tube, 16 gauge only. • 18 MM Plywood (KITPLY/CENTURY) • Branding at footrest and headrest using Pre-Laminated board. • Should be powder coated. • Heavy duty bushes to be used
3COT 7X3.5• Height of the sleeping area from Ground should be 18 Inches. • Head rest from the sleeping area should be minimum 10 Inches. • Foot rest from the sleeping area should be 3.5 Inches. • Cot should be manufactured through MIG welding. • Cot frame should be manufactured using 60><40 tube and supporting frame should be 30x30 tube, 16 gauge only. • 18 MM Plywood (KITPLY/CENTURY) • Branding at footrest and headrest using Pre-Laminated board. • Should be powder coated. • Heavy duty bushes to be used
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail