Bids Are Invited For Civil Work 1 - Dismantling Aluminium Partitions Including Disposal Of Unserviceable Material , Civil Work 2 - Providing And Laying Vitrified Tiles In Floor With Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately).(Size = 600Mm*600Mm) , Civil Work 3 - Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg), Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge , Civil Work 4 - Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up Thegaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Whereverrequired Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Civil Work 5 - For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron , Civil Work 6 - Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge Pre-Laminated Particle Board With Decorative Lamination On Both Sides , Civil Work 7 - Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid Separately) With Float Glass Panes Of 5 Mm Thickness , Civil Work 8 - Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete. , Civil Work 9 - Providing And Fixing 100 Mm Brass Locks For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete , Civil Work 10 - Providing And Fixing Aluminium Tower Bolts , Civil Work 11 - Providing And Fixing Alumiunium Round Shape Handle Of Out Dia 100 Mm With Ss Screws Etc. Complete , Civil Work 12 - Providing And Fixing Pvc Wall Panels With Alumimium Frame Work , Civil Work 13 - Making New Connection Of Copper Pipe From Interior Unit Of Split Air Conditioner Up To Compressor Unit Along With Conduting And, Insulation Etc , Civil Work 14 - Supplying And Charging R-22 Refrigent Gas In 1.5/2 Ton Window/Split Type Ac Units Including Pressure Testiing , Leak Detecton, Vaccumission, Testing, Commissioning Etc., As Required , Civil Work 15 - Hiring Of 2 No Labour For 2 Days For Shifting Of Existing Furniture, Equipements, Office Records Etc. Total Quantity : 1
