}

Strengthening Of L.T. Power Supply From 8 Mgd Recycling Plant To Sump 1 At Chandrawal Water Works- I, CHANDRAWAL WATER WORKS-Delhi

Delhi Jal Board-DJB has published Strengthening Of L.T. Power Supply From 8 Mgd Recycling Plant To Sump 1 At Chandrawal Water Works- I. Submission Date for this Tender is 23-09-2021. Electrification Work Tenders in CHANDRAWAL WATER WORKS Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

29249984
Corrigendum : Strengthening Of L.T. Power Supply From 8 Mgd Recycling Plant To Sump 1 At Chandrawal Water Works- I
Open Tender
Indian
Delhi
CHANDRAWAL WATER WORKS
23-09-2021

Tender Details

Strengthening Of L.T. Power Supply From 8 Mgd Recycling Plant To Sump 1 At Chandrawal Water Works- I

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 21-Sep-2021 Corrigendum Technical Bid 23-09-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 20000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work:Strengthening of L.T. power supplyfrom 8 MGD Recycling Plant to Sump 1 at Chandrawal water Works- I
Sl. No. Item Description
1Fabrication and supply of 12 Mtr high mast shaft in one section suitable for wind speed with raising lowering system comprising, head frame, luminaries carriage suitable to install 06 Nos. luminaries in symmetrical arrangement, double drum winch, 5 mmdia SS wire rope cable connector, manual handle, junction box lightening
2Supply of foundation bolts of 25 mm dia & 750 mm length,manufactured from Special steel along with MS nuts, washer, anchor, plates and templates.
3Supply of Energy efficient environment friendly, long life, exclusive innovative die-cast aluminum flood LED light as light source suitable for height lighting architectural features or retal spaces,1X200 watt JETA VALOUR LED Fitting complete as required. Make: Bajaj/ Philips/ Havells/ DJB approved makes.
4Supply of 4X16 sq. mm PVC insulated & PVC sheathed armored Aluminum conductor cable. Make :-Grandley/ Gloster/ DJB approved makes.
5Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm
6Construction of shallow foundation with M25 grade concrete for the high mast consideration the safe soil bearing capacity at site as 10T/Sq Mtr. At 2.5 Meter depth with all materials and labour. . Size: 1mtrX 1 mtrX 2.5mtr . ( 12 mm & 10 mm TMT bar (@ 45 kq/sq mtr)
7Erection of the high mast with the help crane and suitable tools & tackles, foundation bolt, wiring & fixing of luminaries on pole with all materials like PVC insulated PVC sheathed Flexible cable of suitable copper conductor cores of 1.5 Sq. mm, lugs etc. i/c all labour. The job also includes fixing of MCB in control box, fixing of MCB DP ( and its connections with existing main switch) as taken above and connections of luminaries with control box with copper cable and from control box to main MCB DP with the help of aluminum cable with required thimbling, tapping etc as required.
8Earthing with GI earth pipe 4.5 mtr long 40 mm dia i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc, with charcoal and salt as reqd. 5.2
9Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. 5.7
10Pdg & laying earth connection form earth electrode with 6 SWG & laying earth connection form earth electrode with 6 SWG in 15 mm dia GI pipe from earth electrode i/c Connection with excavation and re-filling as required
11Supply / Fabrication of L T Panel Board cubical type, floor dust & vermin preventing construction, of the minimum size 300 mm, suitable for indoor fixing, made out of 16 SWG CRCA (frame of 14 SWG), with provisions for cable entry from boitom having chambers as- incomer chambers . The panel shoa" separate cable alleys and bus bar alleys.lt should be suitable operation and maintenance from the front and having removable at the back and having doors complete with locks etc. at the front for each chamber. The rating of main bus bars has to be 300 three phases and half for the neutral in Aluminium construction sleeved with phase indicating heat shrinkable Sleeves. It should complete in all respect along with painted through powder boating process and with complete provisions suitable for all the switchgears with complete mounting accessories as per requirement with internal connections of switchgears and control gears with the bars in the Panel through copper cable or bus bars along wiith the required wiring connections for all measuring and indicating instruments with all the accessories, thimbles, ferrules etc. all respect as per requirement. a) S/o Moulded Case Circuit Breaker (MCCB) of rating 12E, Pole, 415V, AC of breaking capacity of 36 KA or more. 1 L&T/Schneider/BCH/C&S b) DP MCB 6 -32 Amp.10 KA "C” curve 05 Nos. Make:- Schneider! Havells/ C&S c) Automation of street lighting with timer 1 No
12Loading, unloading, cartage and transportation charges for high mast pole upto the side i/c charges of heavy labour etc. requirement the above as per site requirement
13Testing & commissioning of complete high mast pole in the engineer in-charge with full satisfaction
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail