}

Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Districts ( 32 Locations ) In Punjab Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Di, Jalandhar-Punjab

Hll Lifecare Limited-HLL has published Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Districts ( 32 Locations ) In Punjab Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Di. Submission Date for this Tender is 23-09-2021. Electrical Maintenance Tenders in Jalandhar Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

29249040
Corrigendum : Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Districts ( 32 Locations ) In Punjab Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Di
Open Tender
Indian
Punjab
Jalandhar
23-09-2021

Tender Details

Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Districts ( 32 Locations ) In Punjab Civil And Electrical Works For Upgradation Of Health Centres Into Health And Wellness Centres At Jalandhar Districts ( 32 Locations ) In Punjab

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 18-Sep-2021 Corrigendum No 1 Financial Bid 23-09-2021
2 20-Sep-2021 Corrigendum No 2 Financial Bid 23-09-2021

Key Value

Document Fees
INR 10000 /-
EMD
Refer document
Tender Value
INR 2.18 Crore /-

BOQ Items

Name of Work: Civil and Electrical Works for upgradation of Sub-centres into Health and Wellness Centres at Jalanthar in SC Kang Arrian District in State of Punjab
Sl. No. Item Description
1Civil Work
2EARTH WORK
3Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
4Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5WATER PROOFING
6Providing and laying 1St quality Terracotta tiles of size 12 mm thick using 1:4 cement mortar 20mm thick with 10mm joints pointed with cement mortar etc complete
7Providing and laying in position lime Surkhi Lime Mortar of specified grade 1:1.5:0.5 (Lime: Surkhi: water) including the cost of required Centring complete as per the direction of Engineer in charge.
8PAINTING
9Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
10Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
11Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
12Painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
13Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture .
14Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
15Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
16DOOR AND WINDOWS, REPARING&REPLACEMENT
17Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & lengthKiln seasoned and chemically treated hollock wood.
18Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick hard wood
19Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
20Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece.
21Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge
22Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. PTMT Tower bolt 152x42x18mm
23REPAIR PLASTERING
24Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge.
25PLUMBING
26Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Circular tank
27Providing and fixing gun metal gate valve with C.I. wheel of approved quality -25MM
28Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ,15mm nominal bore
29Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including paintingof fittings and brackets, cutting and making good the walls whereverrequire:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
30Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes
31Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes
32Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
33Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board,Size -610x510 mm bowl depth 200 mm
34Providing and fixing PVC Waste pipe for sink or wash basin including PVC waste fittings complete.:Semi rigid pipe 32mm dia
35Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
36Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
37Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore with long nose
38Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
39Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid150 mm nominal size square 100 mm diameter of the inner hinged round grating
40Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
41Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
42Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
43Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
44ELECTRICAL
45Point wiring in PVC conduit with modular type switch.
46Wiring for light point/fan point/exhaust fan point /call bell point with 1.5 sq mm FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable PVC box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. Group C
47Wiring through PVC conduit
48Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2X1.5 sq.mm + 1X1.5 sq.mm earth wire
49Wiring for circuit/submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. 2X2.5 sq.mm + 1 X2.5 sq mm earth wire
50Modular boxes, bases & cover plate:
51Supplying and fixing following size/modules, PVC box along with modular base & cover plate for modular switches in recess etc as required. 3 module
52Supplying and fixing following size/modules, PVC box along with modular base & cover plate for modular switches in recess etc as required. 6 module
53Supplying and fixing following size/modules, PVC box along with modular base & cover plate for modular switches in recess etc as required. 8 module
54Modular type switch/socket:
55Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 5/6 Amps switch
56Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 3 pin 5/6 Amp socket outlet
57Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 15/16 Amps switch
58Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 6pin 15/16 Amps (universal) socket outlet
59Supplying and fixing ofPVC conduit:
60Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm
61Installation, Testing and Commissioning:
62ITC Fluorescent fitting directly on surface: Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
63ITC Ceiling fan/wall fan: Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.
64Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
65EARTHING
66Supplying and fixing PVC angle batten/batten holder with 9W LED Lamp, excluding wiring connection as required.
67Supply of 20W LED tube fitting sleek with decorative end cap, powder coated CRCA steel channel complete with all electrical accessories like electronic ballast, lamp holder, 20W LED lamp etc complete as required. (excluding wiring connection).
68Supply and installation of 1200mm, high speed, brown colour Ceiling fanwith its all accessories.(excluding wiring connection).Make as per cpwd standards
69Supply and installation of 400mm,high speed, white coloured wall fan with its all accessories(excluding wiring connection).Make as per cpwd standards
70Supply and fixing of calling bell with its all accessories.(excluding connection).
711 HP MOTOR SUPPLY AND CONNECTIONS:
72Supply, Installation, testing and commissioning of1hp/0.75 Kw, 220 V 50 Hz self priming monoblock water pump with its all accessories. The motor should have the following properties: *Thermal overload protector (Auto cut off on over heating) + ISI Certification. *Copper winding +aluminium body +stainless steel motor shaft *Single phase +2880 RPM +Suction 25 x25 (1" x 1") *Discharge of 1400 Litre per hour + Max current 5.8A + voltage of 180-240 V *Total Head of 25 M +works upto 80 ft(including suction of 15-20 ft) Make[Crompton/Havells/Kirloskar/Beacon/V-guard]
73Supply, installation, testing and commissioning ofManual operated & auto cut off DOL Motor Starter suitable for single phase, 1 hp/0.75 Kw monoblock water pump with its all accessories.[ISI MAKE] and should have the following properties: *Heavy Duty DOL Starter. *Thermal Overload Protection. *Start and Stop Push Button with locking facility for stop button. *Ammeter and Voltmeter. *IP 54 powder coated enclosure. *Motor on indication lamp
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail