}

Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi, AVADI-Tamil Nadu

Military Engineer Services-MES has published Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi. Submission Date for this Tender is 14-10-2021. Door Tenders in AVADI Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

29236998
Corrigendum : Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi
Open Tender
Indian
Tamil Nadu
AVADI
14-10-2021

Tender Details

Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi Comprehensive Repair And Maintenance Of Rolling Shutters In Cvrde Avadi

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 07-Oct-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 14-10-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 10000.0 /-
Tender Value
INR 9.94 Lakhs /-

BOQ Items

NAME OF WORK : COMPREHENSIVE REPAIRS AND MAINTENANCE OF ROLLING SHUTTER IN CVRDE AVADI.
Sl. No. Item Description
1Servicingofsteelrollingshutters(manualtype)foreasyoperation, rectificationofdefectsremovingofdirts , greasingmachanism ,refixingwithclampsrevettingwhere necessaryincludingrepairstolocksallasspecifiedanddirectedbyEngr-in-Charge forthe rollingshuttersof any followingsizesincludingfixingonlysparepartswherevernecessary, takingdownand refixingin positionofshuttersofsizenotless than7.5sqmand n.exc30 sqm complete all as specified and directed by Engineer-in-Charge. Note: Spare parts will be measured and paid separately.
2Supplyonly fabricated lock plate of riveted construction made of Mild Steel Sheet not less than 3.15mm thick reinforced with MS angle section not less than 35X35X5mm Size and lock plate shall be having handle 2Nos, lock plate 2Nos complete all as specified and directed by Engineer-in-Charge.
3Supplyonlytop andbottomrunnersmade outof1.25 mmthickMSsheet complete all as specified and directed by Engineer-in-Charge.
4Supplyonlycast ironworms gearofstandard make /size complete all as specified and directed by Engineer-in-Charge.
5Supplyonlyfoldingpattiesof18gauseMS sheet complete all as specified and directed by Engineer-in-Charge.
6Supplyonlyend clips complete all as specified and directed by Engineer-in-Charge.
7supplyonly ball bearingsuitableforrollingshuttersfor40 mm dia shaft completeall as specified and directed by Engineer-in-Charge.Make : SKF/NBC
8Supply only"00" gaugespiringofsize100mmdia600mmlongasspecifiedanddirectedby Engr-in-Charge.
9Supply only"2"gaugemain spiringofsize100mmdia600mmlongasspecifiedanddirectedby Engr-in-Charge.
10Supplyonly 40mmdiamain shaft any length complete all as specified and directed by Engineer-in-Charge.
11Supplyonly 50mmdiamain shaft any length complete all as specified and directed by Engineer-in-Charge.
12Supply onlygauge wheelsuitablesize complete all as specified and directed by Engineer-in-Charge.
13Runningweldingin repairsnotexceeded6mmthick to bewelded complete all as specified and directed by Engineer-in-Charge.
14Supplyonlyhoodcovermadeoutof1mmthick MSsheetall as specified and directed by Engineer-in-Charge.
15Supplyonlyguidechannelmadeoutof3.15 mmthickMSsheetincludingcleats complete all as specified and directed by Engineer-in-Charge.
16Supply onlyhandlesofMSsize200mmlong complete all as specified and directed by Engineer-in-Charge. Make : GEM / Standard.
17Supplyonlyshaftleverlocking arrangementcomplete all as specified and directed by Engineer-in-Charge.
18Preparation of new steel surfaces over 10cm in width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces complete all asspecified and directed by Engineer-in-Charge.
19Preparationofoldsteelsurfaces over 10cm in width or girth andapplying onecoat ofaluminium paintin any position complete all asspecified and directed by Engineer-in-Charge.
20M/Lforpreparationofoldsteel surfaces over 10cm in width or girth andapplyingonecoatofsyntheticenamel paintinany position complete all asspecified and directed by Engineer-in-Charge.
21Supply only 3.15mm thick bracket plate shape as per IS 6248-1979 of MS fabricated type of size exc 300x300mmx3.15mm and not exc 375x375x3.15mm complete all asspecified and directed by Engineer-in-Charge.
22Supply only 3.15mm thick bracket plate shape as per IS 6248-1979 of MS fabricated type of size exc 400x400x6mm and not exc 500x500x6mm complete all asspecified and directed by Engineer-in-Charge.
23Supply only Bevel gear box with crank handle all as specified and directed by Engineer-in-Charge.
24Preparation of new steel surfaces over 10cm in width or girth and applyingtwo coats of aluminium paint on new steel surfaces complete all asspecified and directed by Engineer-in-Charge. Note: The rolling shutter shall have shop coat primer.
25S&F Steel rolling shutters of 1.25mm thick MS sheet lath, with ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete including taking down old rolling shutter all as specified and directed by Engineer-in-Charge. Note: i) The painting shall be measured and paid separately.
26S&F Steel rolling shutters of 1.25mm thick MS sheet lath with bevel gear box, Shaft and crank handle, with ball bearing at 0.7meter centre to centre as specified including hood cover 1mm thick, spring, gauge wheel, guide channel of 3.15mm thick, bracket plate, end clips, locking arrangement, MS roller shaft min 50 mm dia bore of suitable length etc.and one shop coat of primer erected in position as indicated complete including taking down old rolling shutter all as specified and directed by Engineer-in-Charge. Note: i) The contractor shall provide one crank handle for one rolling shutter. ii) The painting shall be measured and paid separately.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail