Military Engineer Services-MES has published 8258-Repair/ Replacement To Joinery, Plumbing, Sanitary Fittings And Roof Treatment To Certain Bldgs At Army Camp Pallavaram And Baffle Range Under Ge Stm. Repair/ Replacement To Joinery, Plumbing, Sanitary Fittings And Roof Treatment To Certain Bldgs At . Submission Date for this Tender is 13-10-2021. Civil Work Tenders in St Thomas Mount Tamil Nadu. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-10-2021 |
Sl. No. | Item Description |
1 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit. |
2 | All as per item No 1 here in before but n exc 1.5 Sqm each |
3 | Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each. |
4 | Taking down shutters of any description area n.exc 1.00 Sqm each |
5 | Taking down shutters of any description area exc 2 Sqm each and refixing in same opening after necessary repairs/re-size |
6 | Taking down shutters of any description or type area exc 1.00 Sqm and n.exc 2 sqm and refixing in same opening after necessary repairs/re size |
7 | Taking down shutters of any description or type area n.exc 1.00 Sqm and refixing in same opening after necessary repairs/re-size |
8 | Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete with CM 1:4 all as specified |
9 | S&F Powder coated Anodised aluminums frame for sliding windows, ventilatorsandwith one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed. |
10 | S & F Powder coated Anodized Aluminium sliding window andventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws etc complete all as specified and directed. |
11 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
12 | S&F second class hard wood 35mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides |
13 | S&F second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. |
14 | S&F second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. In windows and ventilators are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) |
15 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows |
16 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows |
17 | S&F FI 25x3mm for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165 |
18 | Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating treating ends of posts, backs of Chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each |
19 | Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of Chowkats, etc., area n exc 0.1 sq.m each |
20 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specificationall as directed. |
21 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed by Engr-in-charge. |
22 | S&F Butt hinges,100mm medium weight, cold rolled mild steel, and fixed |
23 | S&F Butt hinges, 75mm medium weight, cold rolled mild steel, and fixed |
24 | S&F 100mm Butt hinges, extruded Aluminum alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 |
25 | S&F 75mm Butt hinges, extruded Aluminum alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 |
26 | S&F extruded aluminum alloy handles,150mmfabricated type anodized |
27 | S&F extruded aluminium alloy handles,100mmfabricated type anodized |
28 | S&F Alluminium, 200mm anodized, barrel tower bolts extruded section & fixed |
29 | S&F Alluminium, 150mm anodized, barrel tower bolts extruded section & fixed |
30 | S&F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
31 | S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete. |
32 | S&F 150mm Floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor |
33 | S&F shutter, hooks & eyes Alluminium, 150mm |
34 | S&F in repairs shutter, hooks & eyes Alluminium, 150mm |
35 | M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer |
36 | Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads. |
37 | S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane |
38 | S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane |
39 | S&F in repairs Aluminium anodised tubular curtain rod 20mm dia with brackets. |
40 | S&F in repairs prelaminated particle board interior grade, 18/19 mm thick prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work as in shelves/ cupboard shutters and partitions. |
41 | M&L 6mm thick teak wood lipping for external of 18/19 thickness of board |
42 | S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised |
43 | S&F 100mm Hasp & staple, safety type, alluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw |
44 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
45 | M&L vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles n exc 0.36 Sqm, in floors etc. set andjointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:4 for floor finishing complete all as specified and as directed. |
46 | M&L non skid ceramic tiles each tile area (sqr/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer with CM 1:4 15mm thickfor laying floor finishes all as specified . |
47 | Material and labour forceramic coloured tiles, Non skid,area of each tile exc 0.18sqm and not exc 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed in CM 1:6 all as directed. |
48 | All as per item No 45,46,47 but in vertical surfaces dado/skirting including CM 1:3, 10mm thick backing coat. |
49 | M&L for glazed coloured ceramic tiles in vertical surfaces 350x250x7/450X350X7 mm thick etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match incl 10mm thick backing coat CM 1:3 dado/skirting |
50 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
51 | Taking down GI water tubing and connections and taken in to schedule of credit for 15mm bore all as directed |
52 | Taking down GI water tubing and connections and taken in to schedule of credit for 20mm bore all as directed |
53 | S&Ftubing, medium grade, galvanised, 15 mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified |
54 | S&Ftubing, medium grade, galvanised, 20 mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified |
55 | S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor . |
56 | S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed |
57 | S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
58 | S&F in repairs 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon(Make shall be Parryware Slimline or equivalent) |
59 | S&F in repair Vitreous China Urinal, Half stall type size (345x320x560) coloured/white completefixing with suitable fixing arrangements to wall with and including CP urinal spreader, CP domed waste coupling and waste pipe complete,all as directed. |
60 | S&F PVC connections 15 mm size with PTMT nuts of length 450mm all as directed |
61 | S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
62 | S&F in repairs 15mm fancy type chromium plated with long shank and cup concealed type angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
63 | S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified |
64 | S&F in repairs pillar cock,fancy type chromium plated,screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore |
65 | S&F in repairs CP wall mixer withfor mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe |
66 | S&F in repairs bevelled edge mirror of size 600X450mm of selected quality glass mounted on 6mm thick AC building boards or on commercial plywood with aluminium beading alround and fixed to wooden plugs with CP brass screws, fixed in repairs. |
67 | S& F in repairs towel rail 600 mm long of PTMT fixedwith and including chromiumplated brass screws and plastic cleats.(Minimm weight 190 gms) |
68 | S&F in repairs chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
69 | S&F sinks with drianage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm |
70 | S&F in repairs PVC gully trap with coverof size 125mm including PCC bed complete all as directed. |
71 | S&F 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc. complete. |
72 | S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints laid in trenches or floors all as specified. |
73 | S&F PVC (SWR) bends 75mm bore |
74 | S&F PVC (SWR) bends with access door 75mm bore |
75 | S&F PVC (SWR) branch piece, single (single Y) equal or unequal with accesdoor |
76 | S&F PVC SWR vent cowl 75mm bore |
77 | S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches or floors all as specified. |
78 | S&F PVC (SWR) bends 110mm bore |
79 | S&F PVC (SWR) bends with access door 110mm bore |
80 | S&F 110mm PVC (SWR) junction single (single T) equal or unequal with acces door. |
81 | Demolition of brick work or stone/boulder masonry, built in cm incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles |
82 | Taking down cement or cement lime plaster, on brick or stone walls,/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.any description |
83 | M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
84 | M&L brickwork withfly ash bricksstraight or curved on plan to any radius in half brick thick walls built in CM 1:4 |
85 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces on internal wall surfaces CM 1:6 fair finished even and smooth without using extra cement. |
86 | M&L rendering 10mm thick on fair faces of concrete surfaces on ceiling CM 1:3 fair finished even and smooth without using extra cement. |
87 | M&Lrendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement. |
88 | M&L preparing newly plastered surfaces of ceilings and applying three coats of white wash to match with the existing surfaces. |
89 | M&L preparing newly plastered surfaces of walls and applying three coat of white wash to match with the existing surfaces. |
90 | Demolition RCC any description and in any position not otherwise specifically provided for |
91 | M&L pre cast cement concrete type B1 1:2:4, (20mm graded stone aggregate ) set in CM 1:6 as in cover slabs for manholes, shelves, etc. |
92 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia |
93 | Dismantling PVC water tanks, 500 liters capacity & removing credit to contractor |
94 | Dismantling PVC water tanks, 1000 liters capacity & removing credit to contractor |
95 | S&F rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no"s 20mm Nipple suitable for HDPE water tank. (minimum weight20mm-45gms complete all as specified. |
96 | S&F rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no"s 20mm Nipple suitable for HDPE water tank. (minimum weight20mm-45gms complete all as specified. |
97 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 20mm-210gms. |
98 | S&F in repairs 20 mm bore of Gun metal globe or gate, valves with iron screwed both ends for iron pipe and fixed |
99 | Removing the existing roof treatment tar felt completelyand remove alldebris from site and rubbish off the premises complete all as directed |
100 | M&L for 25mm average thick, PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in leveling course over the roof slab and providing 10mm thick cement plaster in CM 1:3,mixed with water proofing compoundover the leveling course while the concrete is green, finished fair and even without using extra cement with provision of wire netting all as directed.” Note:WPC and wire netting shall be measured and paid separately. |
101 | Supply only water proofing compound |
102 | M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.0 kg/sqmreinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminum paint over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufacturers: STP/ IWL India Ltd / SAPL (ARGO-P) / Hydrotech Limited (Hydroflame) Note: The work shall be carried out by authorized applicators of manufacturers |
103 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
104 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters and similar work conforming to Fe 290 Gde E-165 |
105 | M&L painting steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide/zinc chrome primer incl prepation of surfaces . |
106 | M&L painting old steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paintincl preparation of surfaces. |
107 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) |
108 | M&L PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in hard standing and the like, 75mm thick finished even and fair. |
109 | Supply and fix Bib cock two way double Handle with flange, fancy type chromium plated,screwed down,screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified Make (Prayag- Cat Part No 8312 Or Equivalent) |
110 | Supply and fixchromium plated cascade health faucet with minimum 1200mm long pipe of fancy type all as specified. Make parrywareCat No.BEA-86 or equivalent |
111 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
112 | Supply and fix in repair9mm thick Perlaminated particle boards, interior grade perlaminated one side with decorative choice lamination & other side balancing white laminationof size 60cm x 60cmsuitably placed in false ceiling gridmade of Aluminiumall as specified and as directed. |
113 | Material and labour for aluminium anodised snap grid 605x605mm false ceilingusing wall angle with main tee section of size 34.5X24.5X1.5 mm and cross Tee section 24.5X24.5X1.5mm. The snap grid shall be supported atends all along the walls with anodized aluminium angle of size 40mm x 25mm x 2mm, weighing 0.36 kg/Rm including 6mm dia GI suspenders (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilng cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia, 40mm longcompleteall as specified and as directed |
114 | S&F stainless steel Soap DishMake : Jaquar AHS-1531 |
115 | S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail