}

Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp, Block Deveopment Office Alathur-Kerala

Rural Development Department has published Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp. Submission Date for this Tender is 24-09-2021. Road Work Tenders in Block Deveopment Office Alathur Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

29209188
Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp
Open Tender
Indian
Kerala
Block Deveopment Office Alathur
24-09-2021

Tender Details

Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp Ncfrw Anikkuruthy Kunnu Road Reconstruction Aterimayur Gp

Key Value

Document Fees
INR 2000 /-
EMD
INR 15000.0 /-
Tender Value
INR 10 Lakhs /-

BOQ Items

Work Name:NCRFW- 2020-21 - Alatahur Block Panchayath- Anikkuruthi - Kunnu road in Erimayur Grama Panchayath...
Sl. No. Item Description
1Retaring - Mord
2od1312992/2021_2022 : Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mmbroken stone and compacting with power roller to get a compact surface.
375.5.2.2pb : Tack Coat - With Packed Bitumen Rates
Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
475.9.3.pb.pa : Plastic roads- Packed Bitumen Rate
20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder -
Bitumen S-65 - Packed Bitumen and Shredded Plastic

Providing, laying and rolling of opengraded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, using HM Plant attached with open pugmilll.Heating of aggregate at 150 degree Celsius to 170 degree Celsius, then transferring the hot aggregate to pugmill and add shredded plastic @10.22 kg/100m2 mixing well to form a uniform thin layer of plastic over - hot aggregate and adding hot bitumen (150 to 165 degree Celsius) @ 13.578 Kg/10m2 and mix well, laying and rolling with a. three wheel 80-100 kN static roller capacity, finished to required level and grades to be- followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508
Case - I By Manual Means

(II) Bitumen (S-65)
575.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510
A. By Manual Means
CaseIII :Type C
(II) Bitumen (S-65)
6Name board-DAR
7od1313007/2021_2022 : Supplying and providing readymade GI name board with all conveyance, labour and<br>hire charges etc complete using GI hollow tube of size 80x40x1.4mm post, 40x20x1.4mm outer frame, 0.6mm<br>thick Iron sheet of size 90x60cm with two coat of enamel painting over a coat of primer, lettering with<br>suitable colour and size,fixing the post in ground with CC 1:2:4 etc complete
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail