Directorate Of Fisheries has published Development And Extension Of Conference Hall Of Directorate Of Fisheries, P.N. Complex, Gurkhabasti, Agartala. Development And Extension Of Conference Hall Of Directorate Of Fisheries, P.N. Complex, Gurkhabasti, Agartala.. Submission Date for this Tender is 30-09-2021. Building Work Tenders in Agartala Tripura. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 20-Sep-2021 | Corrigendum | Date | 30-09-2021 |
Sl. No. | Item Description |
1 | Item Description |
2 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS:15622– 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
3 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622 - 2017, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid over 20mm thick Cement Mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
4 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound of joint and two coats of primer suitjoabinletin for tbapoaersd ,, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer inCharge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer"s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
5 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing and paneling and dash fasteners to be paid for separately):- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/stainless steel screws, all complete as per architectural drawing and the direction of Engineer-in-charge. (Glazing and paneling and dash fasteners to be paid for separately):- For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately ):- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). |
7 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
8 | Filling the gap in between aluminium frame and adjacent RCC/brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in-charge:- (i) Upto 5 mm depth and 5 mm width. |
9 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. of approved quality complete as per direction of Engineer-in-charge:- Anodised aluminium of grade AC 15 ). |
10 | Providing and fixing 100 mm brass locks (best make of approved quality) with 6 levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete as per direction of Engineer-in-charge |
11 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position : Local Teak Wood |
12 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
13 | Providing and fixing decorative plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture |
14 | Providing 40×5 mm flat iron hold fast 40cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : |
15 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete 250 x 16 mm |
16 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150 x 10 mm |
17 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm |
18 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. |
19 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality) |
20 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25 × 3 mm M.S. flat 10 cm long and rawl plugs 50 mm long (designation 10 no.) etc. all complete. |
21 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture |
22 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer-in-charge:- In cement mortar |
23 | Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood prelaminated one side decorative lamination on other side balancing lamination Grade I,Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete.25 mm thick |
24 | Providing and fixing PVC false ceiling with SPUF142-D-01(different design 10mm thick 150mm width and necessary length) of approved colour concealed type panel carrier T Section(DWU:406:40:63.5mm) and L section (DWUF:405:40:48mm) with necessary screw, holdfast PVC beading and MS black pipe structure 48mm dia at 1200mm centre to centre including cutting holes and making goodthe walls completed as per direction of the Engg.-in-charge.For false ceiling- |
25 | Wiring for light/fan/exhaust fan/call bell point2x1.5 sq.mm 5/6 PVC insulated copper conductor cable (FR) in PV C casing and capping complete with wooden switch board with Bakelite cover and piano type switch including connection etc. as require:- (As per TSR 2021 PWD I.E Sl. No.101) |
26 | Wiring for light/fan/exhaust fan/call bell point 2x1.5 sq.mm 5/6 PVC insulated copper conductor cable (FR) in PV C casing and capping complete with wooden switch board with Bakelite cover and piano type switch including connection etc. as require:- (As per TSR 2021 PWD I.E Sl. No.101) |
27 | Providing and fixing of 3 pin 5/6 amps plug point with piano type 5/6 amps switch and socket including connection with 2x1.5 sq.mm PVC insulated copper conductor cable (FR) on switch board, earthling the 3rd pin etc. as required:- (As per TSR 2021 PWD I.E Sl. No.103) |
28 | Wiring for circuit/sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required(As per TSR 2021 PWD I.E Sl. No.105) |
29 | Wiring for circuit/sub-main wiring with the following sizes PVC insulated copper conductor cable (FR) in PVC casing capping etc. as required(As per TSR 2021 PWD I.E Sl. No.105) |
30 | Supplying and fixing of the following sizes wooden switch boards with 3mm thick Bakelite cover etc. as required (As per TSR 2021 PWD I.E Sl. No.605) |
31 | Supplying installation of 10 KA breaking capacity, B/C curve MCB of following ratings in t he existing MCB DB including connection as required: (As per TSR 2021 PWD I.E Sl. No.1215) 6 to 32 amps SP MCB |
32 | Supplying and fixing of following luminaries complete with necessary accessories and connection etc. as required:Box type single FTL fittings of CRCA Steel sheet housing complete with 36/40 W FTL electronic ballast and high quality reflector cover: (As per TSR 2021 PWD I.E Sl. No.1001) |
33 | Supplying and fixing of 1200mmsweep white color AC ceiling fan capacitor type double ball bearing complete with 300mm down rod, canopies, shackles, 3 nos. blades, including wiring the wown rod with 2x1.5 sq.mm PVC insulated copper conductor cable(FR) (ISI Marked, BEE 1 star/minimum service value 4.0 m3/min/W: (As per TSR 2021 PWD I.E Sl. No.1001) |
34 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required: (As per TSR 2021 PWD I.E Sl. No.604) Electrical 4 step mini fan regulator |
35 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required: (As per TSR 2021 PWD I.E Sl. No.604) Ding dong call bell |
36 | Supplying and installation of switch disconnection fuse unit (main switch) of the following ratings with all accessories including necessary MS clamp , nut, bolt etc. as required: (As per TSR 2021 PWD I.E Sl. No.1202) 32 amps 240 volts DP main switch(rewireable) |
37 | Providing and fitting fixing of A. C. machine(Godrej/Samsung/Blue Star/Haier/LG Make) split type 2 ton capacity alongwith accessories like industrial socket, electric wire etc. complete as per direction of the Engineer-in-charge |
38 | Supplying of Chair on tubular frame structure with cushion having dimensions W x H x D (cm) 58 x 87.5 x 56.5, Godrej Make Model No.CH-7B as per direction of the Engineer-in-charge |
39 | Supplying of revolving Chair High Back, Godrej Make Product ID: 56101522SD02049 as per direction of the Engineer-in-charge |
40 | Supplying of Delegate Unit for PA system Ahuja make Model No.CMD-4200 as per direction of the Engineer-in-charge |
41 | Supplying of Amplifier Unit for PA system Ahuja make Model No.SSA-250DP as per direction of the Engineer-in-charge |
42 | Supplying of wall Speaker Unit for PA system Ahuja make Model No.ASX-312BT as per direction of the Engineer-in-charge |
43 | Supplying of conference extension cable CC 46/47 |
44 | Supplying of speaker cable twin flat flexible 0.75 mm |
45 | Installation, fitting & fixing of Delegate Unit, Amplifier Unit, wall Speaker and laying & fixing of conference extension cable, speaker cable etc. in PVC casing capping etc. as required including necessary connection etc. as required and testing of PA System as per direction of the Engineer-in-charge |
46 | Supplying & fitting fixing of silk window screen (size 2.00mx2.00m) of heavy quality with suitable accessories compete as per direction of the Engineer-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail