}

Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Call ) Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Cal, UT OF DNH-Dadra And Nagar Haveli

Public Works Department-PWD has published Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Call ) Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Cal. Submission Date for this Tender is 24-09-2021. Civil Work Tenders in UT OF DNH Dadra And Nagar Haveli. Bidders can get complete Tender details and download the document.




Tender Notice

29184422
Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Call ) Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Cal
Open Tender
Indian
Dadra And Nagar Haveli
UT OF DNH
24-09-2021

Tender Details

Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Call ) Annual Maintenance And Repair Work For Health Infrastructure In Dnh. Package -Iii ( Amboli. ) Civil Work ( 6Th Call )

Key Value

Document Fees
INR 1000 /-
EMD
INR 3000.0 /-
Tender Value
INR 1.50 Lakhs /-

BOQ Items

Name of Work: Annual Maintenance & Repair Work for Health Infrastructure in D&NH. Civil Work :- Package -III (Amboli.) (6th Call)
Sl. No. Item Description
1Providing material, Equipment and labour forExcavation for foundation upto 1.5 m depth including sortingoutandstacking of useful materials anddisposing off the excavated stuff upto 50 Meter lead.(C)HardMurrum complete as directed by engineer-incharge.
2Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- gradedstone aggregates 20 mm nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth.etc complete as directed by engineer-in-charge.
3Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres leadas per direction of Engineer-in-charge.In cement mortar
4Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
5Demolishing RCC/cement concrete/mortar manually/ by mechanical means including disposal of material within 50 metres lead in cement mortar etc, complete as directed by engineer-incharge.
6Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as directed by engineer-incharge.
7Applyingtwo coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brandand manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. Including Wall painting (two coats) with plastic emulsion paint (make of Asian,nerolac,Berger ) of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth
8Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer
9Providing material and labour for Brick work using common burnt clay building brick having crushing strength not less than 35 kg/sq.cm. in Plinth level upto Floor Five Level in cement mortar 1:6 (1 Cement : 6 fine sand) (B) Conventional including curing etc. complete.
10Providing Material, Labour & Equipment for Providing and laying autoclaved aerated cement blocks masonry with 75 mm to 300mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:5 (1 cement : 5 coarse sand ). complete as directed by engineer-incharge.
11Providing 15 mm. thick cement plaster in single coat on fair side of Brick/concrete walls for interior plastering upto floor two level and finished even and smooth in Cement mortar 1:4 [1 cement: 4 sand) includingfloating coat of neat cement slurry and necessary curing, scaffolding, in true line and level etc. complete as directed by Engineer in Charge
1220 mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete
13Providing TMT Bar FE 500/500D reinforcement offor R.C.C. work including bending, binding and placing in position complete upto floor two level
14Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete
15Providing & Laying Glossy / Antiskid Ceramic tiles 6mm thick (300X300) in flooring, treads of steps, landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush point in white cement with matching pigments, etc as directed by engineer-incharge.
16P & L 24" X 24" vitrified/Marbo Granite 8mm thick tile flooring over 20mm (average) base of cement mortar 1:3 (1 cement : 6 coarse sand) finishing with flush pointing in white cement with matching pigments, etc as directed by engineer-incharge.
17Providing & Laying Glossy / Antiskid Ceramic tiles 6mm thick (300X300) in skirting, Dado on a 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finishing with flush point in white cement with matching pigments, etc as directed by engineer-incharge.
18P & L 24" X 24" vitrified/Marbo Granite 8mm thick tile in skirting, Dado on a 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finishing with flush point in white cement with matching pigments, etc as directed by engineer-incharge.
19Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, etccomplete as directed by engineer-incharge.
20Providing Material, Labour and equipments for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
21Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.), etc complete as directed by engineer-incharge.
22Providing Material, Labour & Equipment for Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) sections confirming to IS 4923-1997 etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete, with Hot finished seamless type tubes, including all Hinges, Castor Wheel, Aldrop, Fixtures and Fasteners, etc as approved by engineer-incharge.
23Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. Painting two coats on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.
24Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
25Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
26Providing Material, Labour and equipments for Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Gutter .(600 mm over all girth)
27Supply of 35mm thick Fiber Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in wood grain rasied panel design having extra reinforcement on sides & edges & in polish design finish. The core of the shutter is to be filled up with injectedretardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldropwith necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Heavy Door handles with screws etc 150mm long on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.
28Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Powder coated aluminium (minimum thickness of powder coating 50 micron)
29Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 4.0 mm thickness
30Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 5.50 mm thickness
31Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With Aluminium Composite Panel of 4.0 mm thickness
32Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
33Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
34Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
35Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc, complete as directed by engineer-incharge.
36Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
37Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)(A) vitreous China Pattern :(i) in white colour and Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. White plastic seal and cover. Providing and fixing 12.5 Litres low level flushing cistern with a pair, ofC.I.or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet Vitreous China (I) In white colour (Make Parryware, Hindware, Cera, Jaquar)*.
38Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm(A) Vitreous China.(I) Long pattern = White colour and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. and fixing in Cement Mortar1:3 (1-Cement : 3-coarse sand), pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet. Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(ii) 25mm dia, etc complete as directed by engineer-incharge.(Make Parryware, Hindware, Cera, Jaquar)*.
39Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover.
40Providing and fixing wash basin Cera,Hindware,Somany (550x400 mm ) counterfitCera/ hindware ,including40 mm dia C.P. brass waste, 40 mm dia waste pipe, 15mm dia flexible pipe and rubber plugsetc. complete as directed.
41Providing and fixing C.P. brass Heavy Duty Swan Neck Type Pillar cock {Make Jaquar, Kohler, Roca, and/or as approved by Engineer-incharge Pillar Cock with Raised ‘J’ Shaped Swinging Spout (Table Mounted Model)}of approved quality conforming to IS:Standards : 15 mm nominal bore (Make Jaquar, Kohler, Roca, Cera, Parryware, Hindware, Plumber)*
42Providing & fixing 600 mm X 450 mm beveled edge mirror Cera,Hindware Or Equivalent of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and washers, including fixing C.P. brass bracket support and guard rail fixed to wooden plugs with C.P. brass screws etc. complete as directed by engineer In charge.
43Providing and fixing 600 mm X 200 mm size C.P. brass towel rail Cera,Hindware Or Equivalent complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etc. complete as directed by Engineer In charge.
44Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink ( NIRALI BRAND ) as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever requiredKitchen sink with drain board 510 x 1040 mm bowl depth 225mm as directed by Engineer in Charge
45Providing and fixing C.P. brass angle stop cock heavy duty with cap for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore with all fittings, etc complete as directed by engineer-incharge.
46Providing and fixing C.P. brass Heavy duty bib cock with cap of approved quality conforming to IS standards. 15 mm nominal bore, with all fittings, etc complete as directed by engineer-incharge. (Make Jaquar, Kohler, Roca, Cera, Parryware, Hindware, Plumber)*
47Providingmaterial andlabourforconstruction of Kitchen Platform made from Black Granite (16mm to 18mm thick) in top of kitchen platform rested on black kadapastone (av.30mm thick) supported on sandwiched vertical supports of Kadapa Stonebottom of granite stone for base of platform, at required distance or as directed by Engineer-in-charge. One side vertical granite stone in geometrical shape, front granite stone patti for fascia work as well as horizontal boarders including molding and mirror polishing by hand grinder to all exposed black granite edges and providing opening of required size and shape of kitchen sink in granite and kadapa stone in line and level. The vertical supports of kadapa stone sandwiched/ gap fill up with cement mortar 1:1 and cement slurry and the granite stone vertical side and patti etc with adhesive material like Araldite etc complete as directed by Engineer-in-charge.
48Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.50mm.
49Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.40mm.
50Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.32mm.
51Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.25mm.
52Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.20mm.
53Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.15mm.
54Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (a) 20mm dia nominal bore.
55Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (b) 25mm dia nominal bore.
56Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (c) 32mm dia nominal bore.
57Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (d) 40mm dia nominal bore.
58Providing and fixing Gun metal gate valve with C.I. wheel of approved quality (screwed end). (e) 50mm dia nominal bore.
59providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of required capacity each with al necessary fitting & connection etc Comp. on terrace as directed by Engineer in Charge
60Providing laying and jointing in true line and level 160 diameter U.P.V.C. SWR Type B pipe PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by Engineer in-Charge & conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, & fitting conforming to ISI 14735-1999 of approved make for Horizontal drainage line below ground level, including necessary fittings such as bends, tees, rubber packing ring etc. testing of pipeline, jointing with adhesive solvent cement including cost of excavation,lowering and laying pipes, refilling the trenches, jointing materials and all other necessary fixtures fitted, air and water tight testing of the line etc. complete as directed.
61Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 PRINCE/SUPREME/ASTRAL/FINOLEX or equivalentas approved by Engineer in-Charge & working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor. 110 mm Dia
62Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polyurethane pipes of the following outside Dia.PRINCE/ SUPREME/ASTRAL/ FINOLEX or equivalent Low density, complete with special flange compression type fittings, wall clips etc. including making good the wall ceiling and floor. 75 mm Dia
63Providing Brick bats chhara filling in sunken floors including watering, consolidating, ramming etc complete.
64Construction of brick masonry chamber inside dimension asbelow& required depth for drainage pipeline, with required inlet and outlet for under ground C.I. inspection chamber and with 230 mm thick brick wall having crushing strength not less than 35 Kg. /sq.cm. in C.M.1:5 (1cement : 5 sand) C.I. Cover with frame(Light duty 455 mm X 610 mm internal dimension, total weight of cover with frame not less than 38 Kg. ( weight of cover 23 Kg and weight of frame 15 Kg),R.C.C. top slab with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size B.T. Kapchi) foundation concrete 1:2:4) (1 cement :2 sand :4 graded stone aggregate 40 mm nominal size) inside plaster 15mm thick in cement mortar 1:3 (1cement : 3 sand ) finished smooth with floating coat of neat cement slurry on walls and bed concrete curing etc. in true line and level/slope etc. complete as directed by Engineer In charge.Inside dimension 455 mm x 610 mm and 450 deep or more for pipe line with one or two inlets as directed by Engineer in Charge.
65Providing and fixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) Whiteearthenwareflatback or corner type size 430mm x 260mm x 350mm., including painting of fittings and cutting and making good the walls and floors wherever required, complete as directed by engineer-incharge.(Make Parryware, Hindware, Cera, Jaquar)*.
66Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I. Scread down or hinged grating including the cost of cutting and makinggood the walls etc. as per the approval of Engineer in charge.
67Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and inated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
68Providing and fixing at required position,12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit etc. complete including removing of existing tile and aligning the grid in true horizontal level etc. complete including all material and labour as direted by Engineer-in-charge
69Providing and fixing false ceiling/Wall cladding at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, upto 1200 mm centre to centre or as required during course of work at site, one flange fixed to the ceiling/wall with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x25x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of upto 1200 mm centre to centreor as required during course of work at site, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, upto 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling/wall fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling/wall section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board, etc complete as directed by engineer incharge.
70Providing Material, Labour and equipments Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.complete as directed by engineer-incharge.
71Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M250 pnumatic compressed by mechanically pressed and as per approved designincluding 75mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.
72Providing Welder + Helper with necesaary tools, machines and welding rods for repairing work including transportation, etc as directed by engineer-incharge.
73Providing Plumber + Helper with necesaary tools, Solvents & Chemicals for repairing work including transportation, etc as directed by engineer-incharge.
74Providing Carpenter + Helper with necesaary tools, machines and nails, screws, fastener, etc for repairing work including transportation, etc as directed by engineer-incharge.
75Providing Material, Labour and equipments forProviding and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thickjointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : including Khurra & Gola work With average thickness of 120 mm and minimum thickness at khurra as 65 mm, etc complete as directed by engineer-incharge.
76Providing and fixing five courses water profing treatment with bitumen felt consisting of second and fourth course of blown / bitumen or/ and residual bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and firstcourse with fibre base bitunensaturated under lay type land third course with fibre base self finishedfelt type 2 grade 1 and fifth and final course of stone grit 6mm and down size or pea sizes gravel spread at 0.008 Cu. Metre / Sq. metre includingpreparation of surface excluding grading complete. (upto 10 ton)
77Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm
78Dismentalingtiles, granite in skirting and/or floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail