Public Works Department-PWD has published Providing Ramps Slopes, Toilets For Physically Handicapped Students At Jawahar Navodaya Vidhyalay Silli ( 4Th Call ) Providing Ramps Slopes, Toilets For Physically Handicapped Students At Jawahar Navodaya Vidhyalay Silli ( 4Th Call ) . Submission Date for this Tender is 24-09-2021. Toilet Bathroom Tenders in UT OF DNH Dadra And Nagar Haveli. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing material and labourforDismentalingtiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. |
| 2 | Providing material and labour for Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar. |
| 3 | Providing material and labour for Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming and consolidating etc. complete |
| 4 | Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6(1- Cement : 6 -fine sand)(B)Conventional |
| 5 | Providing material and labour forlaying controlled cement concrete M.200 andcuring complete includingthe cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels,Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge. |
| 6 | Providing material and labour for TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level |
| 7 | Providing material and labour for laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. |
| 8 | Providing material and labour forlaying controlled cement concrete M.200 andcuring complete includingthe cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Chajja upto and above floor two level, etc complete as directed by engineer-incharge. |
| 9 | Providing material and labour for Excavation for foundation upto 1.5 m depth including sortingoutandstacking of useful materials anddisposing off the excavated stuff upto 50 Meter lead.(A)Looseorsoftsoil |
| 10 | Providing material and labour for laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- gradedstone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth |
| 11 | Providing material and labour for laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth |
| 12 | Providing material and labour forfixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm |
| 13 | Providing material and labour forfixing FRP of 28mm thick Fibre Glass shutter with 1.5 to 2.0 mm thick fire retardent grade FRP skin in depressed panel design having extra reinforcement on sides & edges & in Gel coat finish. The core of the shutter is to be filled up with injectedretardent grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof ,weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures & fastenings & fastener sleeve. |
| 14 | Providing material and labour for10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) |
| 15 | Providingmaterial and labour forfixing tiled false ceiling of approved materials of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 16 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistancewith diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt , LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates) (D) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete. (f) upto 36 watt, 600 x 600 mm, surge - 4 KV |
| 17 | Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour with 12.5 Litres low level flushing cistern with a pair, ofC.I.or Mild brackets, complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour |
| 18 | Providing material and labour for making BLACK GRANITE STONE COUNTER WASH BASIN of 0.60mt wide with vertical & Horizontal support of granite stone and having bottom Slab of 25mm to 30mm thick kadappa stone fixing with cement mortar 1:4 ( 1 cement :4 fine sand) and neat cement slurry as per requirement including cutting the granite stone & Providing & fixing oval shape wash basin of 22” x 16” size white colourin line & level.All exposed Edges of granite should be moulded including all accessories like pillar cock(swan neck type), flexible inlet pipe 15mm dia, C.P brass waste coupling 32mm, PVCwaste pipe 32mm etc.as directed by engineer in charge. |
| 19 | Providing material and labour forfixing Urinal or approved quality including conecting the Urinal with waste pipe , tap etc. complete.(A) Whiteearthenwareflatback or corner type size 430mm x 260mm x 350mm. |
| 20 | Providing material and labour forfixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 21 | Providing material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete |
| 22 | Providing material and labour for Painting one coats (excluding priming coat) on previously printedsteel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surfaceof all dirt, dust and other foreign matter. |
| 23 | Providing material and labour forPainting two coats (excluding priming coat) on previously paintedwoodand wood basedsurface withenamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter. |
| 24 | Providing material and labour for fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm. |
| 25 | Providing material and labour for fixing fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. |
| 26 | Providing and fixing pillar tap, capstanhead, screw down high pressure with screws, shanks and back nuts.(i) 15mm dia. |
| 27 | Providing material and labour forfixing screw down bib taps of following size.(A) Brass screw down bib tap polishedbright.(i)15mm dia. |
| 28 | Providing material and labour for fixing 30 mm wire gaugeshutters using galvanised M.S. wire of I.S. gauge designation of 85 G. with wire of 0.56 mm dia,forDoors, windows and clearstory windows including bright finished or/ and black enamellede M.S. butt hinges with necessary Mango wood or equivalent quality. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
