Irrigation And Flood Control Department-IFCD has published Mid/An/55 Providing Fitting Testing And Commissioning Of Bowl Assembly For 20 Cusecs Discharge 61 Mtr Head Vt Pump Existing Model Make 700 T1a6 Jyoti Or Any Reputed Make Of Similar Parameters At Lis Ranjan.. Submission Date for this Tender is 09-10-2021. VT Pump Tenders in Akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Design, Manufacture, assembling, factory testing, supply, installation, testing and Commissioning [at LIS Ranjan of new raw water (cold river water) complete replacement of bowl assembly] of new bowl assembly for already installed 20 cusecs discharge 61 m HeadVT pump (700 T1A6 model of Jyoti make) at LIS Ranjan coupled with 3-phase 6.6kV, 50Hz, 986 rpm (ACW), slip ring, vertical solid shaft, 650HP HT induction motor. The Bowl assembly shall be suitable for following parameters of units installed/ site conditions:- PUMP: - VT pump of capacity (Q) 20 cusecs x 61 m head (H) with three stages having speed of 986 RPM. The pump is to be operated in open sump in parallel with other three pumps of same capacity with minimum submergence of 1.70 mtrs. Forced external clear water lubricated pump at the pressure of 5.0 kg/ sq.cm. the bowl assembly of output 348.84 kW. Column Pipe assembly:- Size 500mm x 200mm x 70mm dia with discharge outlet size of 500mm dia. PRIME MOVER/DRIVER:- Slip ring type Solid shaft , Three phase 650 H.P , 6.6 KV, 50 Hz AC electric induction motor of nominal speed 986 RPM. TYPE OF DUTY WATER: - cold water, silt laden, raw water (fresh raw water) Apart from above described parameters other desired specifications affecting the bowl assembly shall satisfy/coincide the requirement as per installed complete VT pumping unit of Jyoti make model 700 T1A6 and other site conditions. The job includes assembling of bowl assembly with already existing column pipe assembly (shaft enclosing tube and line shaft), forced water lubrication system, discharge head and coupling with electric Prime-mover & providing / fitting in position of nuts/ bolts of sorts as per actual specifications. Testing :- Obtaining of expected field performance curve/ in lab/ shop testing and lab/shop testing at reduced speed and stages shall be according to IS 5120. Field test shall be carried under actual site conditions to check/ test at specified speed, discharge, delivery head, net pump effective head, and other connected parameter over a specified period with regular observations. The job includes cost of component, labour, carriage to & fro transportation , loading/ unloading, handling, Storage / stacking, connected tools/ tackles, testing, commissioning and required servicing over the warranty period. (Complete job as per parameters/technical specifications and conditions mentioned in SBD) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail