}

Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar, ALWAR-Rajasthan

Military Engineer Services-MES has published Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar. Submission Date for this Tender is 08-10-2021. Building Repair Tenders in ALWAR Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

29175331
Corrigendum : Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar
Open Tender
Indian
Rajasthan
ALWAR
08-10-2021

Tender Details

Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar Spl Repair To Bldg No Jp-119 Or Md Accn And Bldg No T-06 (Carpenter Sec, Upholester Sec And Mt Store) At City Area Alwar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 01-Oct-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 08-10-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 89000.0 /-
Tender Value
INR 44.44 Lakhs /-

BOQ Items

Name of Work : SPL REPAIR TO BLDG NO JP-119 OR MD ACCN AND BLDG NO T-06 (CARPENTER SEC, UPHOLESTER SEC AND MT STORE)AT CITY AREA ALWAR
Sl. No. Item Description
1Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonryand removal complete all as specified& directed by Engr-in-Charge.
2M&L for brick work with sub class" B" bricks, straight or curved on plan exc 6 m mean redious, builtin CM 1:6 complete all as specified& directed by Engr-in-Charge.
3Brickwork with sub-class `B" brick straight or curved on plan to any radius in half brick thick walls built inCM 1:4 complete all as specified& directed by Engr-in-Charge.
4Demolition of cement concrete (un-renforced) in ground floor and paving not exc. 15 cm thickness(below or above ground level.) & removal of rubbish material complete all as specified& directed by Engr-in-Charge.
5M&L for PCC (1:2:4) type B-1 (using20mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified& directed by Engr-in-Charge.
6M&L coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
7M&L non skid ceramic tiles colored 300x300x7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge.
8M&L Glazed ceramic coloured tiles in vertical surface450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge.
9M&Lcoloured glazed tiles of size 300mmx200mm and 7mm thick on vertical surfaces jointed in neat cement slurry and pointed with coloured cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified& directed by Engr-in-Charge.
10M&L machine cut kota stone slab flooring 20-25mm thick over20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified& directed by Engr-in-Charge.
11M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types andover screed bed 20 mm thick CM1:6 cement concrete complete
12M&L 75 mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed by Engr-in-Charge.
13Taking down cement plaster any description on brick or stone walls etc.
14M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.
15M&L for rendering 15mm thick in CM 1:4 on stone masonary surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) all as specified.
16All as per serial item No 15.00 but 10mm thick in CM 1:4 over ceiling.
17Supply only Integral waterproofing compound
18M&L for preparation of newly plastered surfaces of wall and applyingthree coats of white wash complete all as specified & directed by Engr-in-Charge.
19M&L for preparation of old plastered surfaces of wall and applyingone coats of white wash complete all as specified& directed by Engr-in-Charge.
20M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paintof approved shade/tint complete all as specified& directed by Engr-in-Charge.
21M&L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified& directed by Engr-in-Charge.
22M&Lfor preparation of newly plastered surfaces & applyingthreecoat of white wash on ceiling complete all as specified& directed by Engr-in-Charge.
23M&Lfor preparation of old plastered surfaces & applyingone coat of white wash on ceiling complete all as specified& directed by Engr-in-Charge.
24M&L for preparation of new plastered surfaces of walls and applying two coats of Oil bounddistemper overa coat of 3 mm thick wall care putty of approved tint complete all as specified & directed by Engr-in-Charge.
25M&L for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar Set in cement mortar 1:4 (type B-0 1:2:4) 12.5mm agregate complete all as specified& directed by Engr-in-Charge.
26Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of)etcin all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified& directed by Engr-in-Charge.
27M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified& directed by Engr-in-Charge.
28M&L rendering 15mm thick in CM 1:4with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge.
29Supply only Integral waterproofing compound
30M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. mincluding cleaning surfacesover bituminious primer complete all as specified& directed by Engr-in-Charge.
31M&LAPP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
32M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding,laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted inmin slope 1:30 over roof complete all as specified& directed by Engr-in-Charge.
33Cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises
34Forming jambs, etc., to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work built in CM 1:6, including facing and pointing (if necessary) to match existing work, complete all as specified& directed by Engr-in-Charge.
35M&L 50mm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4,complete all as specified& directed by Engr-in-Charge.
36Cutting holes in stone walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1n exc 1/2 brick wall complete all as specified& directed by Engr-in-Charge.
37Cutting holes in stone walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exc half brick wall complete all as specified& directed by Engr-in-Charge.
38Taking down chowkatts or framesn exc 1.5 sqm each complete all as specified & directed by Engr-in-Charge.
39Taking down chowkatts or framesexc 1.5 sq. m but n exc 4 sq m each complete all as specified& directed by Engr-in-Charge.
40Taking down shutter of any decription exc. 1 Sqm and n. Exc 2 Sqm complete all as specified& directed by Engr-in-Charge.
41M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
42M&L for framed work as in doors or gates of angle frame for chowkats or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.Fe-410 (Gde-E250 quality A).
43S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified& directed by Engr-in-Charge.
44S&F 35mm thick IInd class hard wood factory made panelled door shutter(two panel) with lock rail and panelof 9mmBWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed by Engr-in-Charge.
45S&F 35mm thick IInd class hard wood factory made panelled door shutter without interlocking rail and with one panel of 9mmBWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed by Engr-in-Charge.
46S&F 35 mm thick 2nd class hard woodGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed by Engr-in-Charge.
47M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed by Engr-in-Charge
48M&L 25mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified& directed by Engr-in-Charge.
49M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed by Engr-in-Charge.
50M&L for preparation of old wooden surfaces over 10cm width or girth andapplying one coat of synthetic enamal paint (of approved shade) complete all as specified& directed by Engr-in-Charge.
51S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed by Engr-in-Charge.
52S&F Butt hinges 75mm long medium weight, colled rolledmild steel for Prelaminated doors complete all as specified& directed by Engr-in-Charge.
53S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixedcomplete all as specified & directed by Engr-in-Charge.
54S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed by Engr-in-Charge.
55S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified & directed by Engr-in-Charge.
56S&F 150mm Hasp and staple, stainless steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified& directed by Engr-in-Charge.
57S&F in repair stainless steel drapery rod 25mm dia (in lengths directed) of approved colour with and including decorative bowel at both ends and pair of power coated stainlesssteel brackets fixed at both ends with pvc Rawl plug and steel screwed on walls/beamcomplete all as specified & directed by Engr-in-Charge.
58S & F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.
59S&F in repairfor pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer, complete, all as shown in Drg No. TD/2004/29 sheet No. 1/3 to 3/3
60S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.
61S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.
62S & F for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium grill of approved pattern for windows/ ventilators/doors complete all as specified and directed.
63M&L for preparation of old steel surface of any description,exc 10cm in width or girth when unconnected with other painting or when painted in a different tint with one coats of synthetic enamel paintcomplete all as specified & directed by Engr-in-Charge.
64Supply only sheet glass ordinary quality,in squares n. exc. 0.5 SQM each 4.80 mm thick complete as directed by Engineer-in-charge
65S&F in repair kitchen sink without draining board made out of stainless steel 1mm thick with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including and fixing cast iron cantileverbrackets and connecting union to pipe over all size 495x420 mm bowl size 410x330x160 mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nutscomplete all as specified & directed by Engr-in-Charge.
66S&F Stainless steel plate rack, 1.00mm thick for kitchen size 600x900x230mm complete all as specified & directed by Engr-in-Charge.
67S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed by Engr-in-Charge.
68Demolition of RCC (water tank) of any description and in any position not otherwise specifically provided foris reinforced (reinforcement cut as required to facilitate demolition) complete all as specified& directed by Engr-in-Charge.
69S&F Rotational moulded polyethylene water storage tanksof 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I includingdismantling water tanks complete all as specified& directed by Engr-in-Charge.
70S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm diacomplete all as specified & directed by Engr-in-Charge.
71Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.
72Taking up or down 20mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.
73S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floorcomplete all as specified & directed by Engr-in-Charge.
74S&F 20mm GI tubing Medium grade fix to wall/floorcomplete all as specified & directed by Engr-in-Charge
75S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified & directed by Engr-in-Charge.
76S&F in repair white vitreous china wash hand basin "Flat back" of size 550x400mm fixed on and including new brackets CPwaste coupling and PVC Waste pipe complete all as directed by the Engr-in-charge.
77S&F 15mm dia CP pillar tap fancy typecast copper alloy, CP with capstan head, screwed ddown high pressure, with or without lettered "HOT" or "COLD" with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as directed by the Engr-in-charge.
78S&F in repair Stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm diacomplete all as specified & directed by Engr-in-Charge.
79S&F in repair Stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge.
80S&F in repair Stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 20 mm diacomplete all as specified & directed by Engr-in-Charge.
81S&F Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as directed by the Engr-in-charge.
82Cutting holes into or through brick but in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of limeEx 150 sq. cm but n exc 400 sq. Cm (not excluding 25CM depth) for cooler stand complete all as specified& directed by Engr-in-Charge.
83S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified& directed by Engr-in-Charge.
84S/F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe,etc.complete including making food to floor complete all as specified & directed by Engr-in-Charge.
85S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve,float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, fixed in repairs, complete all as specified.
86S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified & directed by Engr-in-Charge.
87S&Fin repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed by Engr-in-Charge.
88S&F in repair PVC (SWR) bends any radius 110 mm borecomplete all as specified & directed by Engr-in-Charge.
89S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms)fixed with cementcomplete all as specified & directed by Engr-in-Charge.
90S&F in repair PVC (SWR) vent cowl 110mmcomplete all as specified & directed by Engr-in-Charge.
91S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed by Engr-in-Charge.
92S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified & directed by Engr-in-Charge.
93S&F in repair PVC (SWR),110mmjunction single, (Single T) equal or unequalcomplete all as specified & directed by Engr-in-Charge.
94M&L writing letters or figures(Block,roman,Italic or Indian letter n.exc 30cm high) complete as directed by Engineer-in-charge
95S&F in repair 300mm Helical/rat tail door Spring 300mm size with MS sheet wing pattern including roller plate complete as directed by Engineer-in-charge
96S&F brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.
97M&L for angle or other section with gusset plates, rails, braces ,stairs (framed) including stringers, treades, landing, balusters, hand rails confirming to FE 290 Gde E -165 etc, including cleats,brackets, etc complete all as specified & directed by Engr-in-Charge.
98S&FPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etccomplete all as specified & directed by Engr-in-Charge.
99Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in soft/loose soil complete all as specified & directed by Engr-in-Charge.
100M&L PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundationcomplete all as specified & directed by Engr-in-Charge.
101Returning filling in incl spreading levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified & directed by Engr-in-Charge.
102Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above or below the starting pointcomplete all as specified& directed by Engr-in-Charge.
103M&L for hard core (broken stone or boulders) of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
104M&Lfor 75 mm thick PCC 1:4:8 type D -2 using 40 mm graded aggregate as in sub base of path/hardstandingcomplete all as specified & directed by Engr-in-Charge.
105M&L 60mm thick machine pressed precast conctete interlocking paver block with grey cement andpigment any shape and size confirming to IS 15658-2006 , M-35 Grade and over 25mm thick sandcomplete all as specified and as directedby Engr-in-Charge.
106M&LPrecast cement concrete solid blockfactory made in PCC 1:2:4 type B-1 using (20 mm graded stone aggregates )set in CM 1:6(sizeof precast concrete blockcomplete all as specified & directed by Engr-in-Charge.
107M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
108M&L for Cement concrete 50mm thick type B-2, 1:2:4 (40mm graded aggregate) in floors complete all as specified& directed by Engr-in-Charge.
109M&Lfor 100 mm thick PCC 1:4:8 type D -2 using 40 mm graded aggregate as in sub base of path/hardstandingcomplete all as specified & directed by Engr-in-Charge.
110M&L Struck or recessed pointing, to brick walls in cement mortar 1:4 complete all as specified and directredby Engr-in-Charge.
111Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed by Engr-in-Charge.
112M&L for 6mm thick asbestos cement (AC) corrugated or semi-corrugated sheets, greyas in roof covering/cladding to wall, fixed with self tapping screws etccomplete all as specified & directed by Engr-in-Charge.
113S&F steel windows side hung shutters, withbox type hinges with steel handles and steel peg stay and two number of tower bolts 150mm size with outsash bars, complete all as specified.
114All as per Serial itemNo 113.00 above here-in-before but with glazing bars.
115S&F M.S. frame work such as grills/guard bars etc. with ends of bars, shouldered and orriveted or forged into spikes and similar works confirming to Fe-410-0 or Fe-310-0 including a coat of red oxide primerafter preparation of steel surfaces complete all as specified.
116S&F sheet glass plain 3mm thick ordinary quality as in glazing in Square not exceeding0.5 Sqm in each pane and fixed in position with oil putty complete all as specified & as directed by Engineer-in-Charge.
117Taking down carefully, copper / aluminium unserviceable /perished point wiring any type for light/ fan/ socket or power complete including fittings such asswitches, ceiling roses, pendant holders, lamp holders, bracket holders, regulators sockets, light fittings etc, and making good to disturbed surfaces of wall/floor/ceiling etc, complete, all as specified and directed.
118M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.
119All as per serial item No. 118.00 here-in-before but for one exhaust fan / ceiling fan point controlled by one switch and regulator.
120All as per serial item No. 118.00 above but for one bell/buzzerpoint controlled by one bell push
121All as per serial item No. 118.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
122All as per serial item No. 118.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
123All as per serial item No. 118.00 here-in-before but for one 3 pin socket outlet 15/16 Amps with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour
124All as per serial item No. 118.00 here-in-before but for one 3 pin socket outlet 15/16 Amps with 4.00 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour
125S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Voltscomplete all as specified and directed.
126S&F switch piano flush type, single pole, two way, 5/6 Amp, 230 Voltscomplete all as specified and directed.
127S&F switch piano flush type, single pole, one way, 15/16 Amp, 230 Voltscomplete all as specified and directed.
128S&F socket outlet for 3 pin, 5/6 Amp, flush type 240 Voltcomplete all as specified and directed.
129S&F socket outlet for 2 in 1, 3 pin 5/6 & 15/16 Amp, flush type 240 Voltcomplete all as specified and directed.
130S&Fbell push flush type, 5/6 Amp 240 Voltscomplete all as specified and directed.
131S&F elctric bell / buzzer, AC, 230 volts, single polecomplete all as specified and directed.
132S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
133S&F fan regulators electronic step up type and connecting up, ISI marked flush type, 120 watt, 240 volts complete all as specified and directed.
134S&F ceiling rose surface Bakelite 65x50mm two or three terminals complete all as specified and directed.
135S&F decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 9 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed.
136S&F decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube 6000K of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :-Havells Cat Part No LHEXBLP7PN1W018or equivalent of Syska / Crompton Greaves as approved by GE
137S&F LED bulb energy saving 10 / 11 W complete all as specified and directed.
138Supply and fixing LED type street DRACO Series light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LEDcomplete, all as specified & directed. Make :- C&S Cat Part No LTESS20WLED or equivalent of Havells / Syska / CG as approved by GE
139S&F sheet metal enclosures, double door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 4 way, 240 volts complete all as specified and directed.
140S&F sheet metal enclosures, double door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
141S&F MCB 32 Amps, single pole & neutral, 230 Volts complete all as specified and directed.
142S&F MCB 6 to 32 Amps, single pole, 230 Volts complete all as specified and directed.
143S&F MCB 63 Amps, Triple pole & neutral, 230 Volts complete all as specified and directed.
144S&F 2nd class hard wood rectangular block open recessed of size 45x30x5 cm depth with 3mm thick hylum/Bakelite sheet on top grouted with 4 Nos bolts for DB complete all as specified and directed.
145S&F 2nd class hard wood rectangular block open recessed of size 30x25x5 cm depth with 3mm thick hylum/Bakelite sheet on top grouted with 4 Nos bolts for DB complete all as specified and directed.
146M&L for sub main wiring with two runs of 6 sqmm (nominal area) size main cable & one run of 6 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked (IS: 694) cables, drawn through & including suitable size of heavy duty PVC conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed on surfaces of wall/ceiling including taking down old unserviceable wiring complete all as specified and directed. Note:-02 runs of 6 sqmm size, 01 run of 6 sqmm size cable & conduit with accessories shall be measured as one run length for payment purpose.
147S&F 1100 Volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,one twin core cable flat or circular of aluminium stranded conductors of size 10 Sqmm all as specified & directed including dismantling & taking down old unserviceable service cable with suspension wires & hangers.
148Supply, laying, jointing and testing XLPE insulated, armoured,heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 50 sqmm 3.5 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
149All as per serial item No. 148.00 here-in-before but ross sectional area 25 sqmm 4 core
150M & L for brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
151M&L dry sand (Tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
152M&L for Galvanized iron tubing, 40mm bore light grade, ISImarked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete.
153S&F mounting bracket (suitable for fixing / holding street / security light fittings) fabricated out of GI tubing 25 mm bore light grade not less than 1.5m long made to shape at required angle & including 2 Nos flat iron clamp 30x5mm to be tightened with 2 Nos nut & bolts, washers of suitable size mounted on pole and including taking down old unserviceable mounting brackets complete all as specified and directed.
154Disconnecting & taking down existing electric energy meter of any capacity, any make, any size and depositing in store yard of AGE E/M and refixing the same serviciable electronic energy meter inside old metre box including making connections with DBs/Sub main and testing complete all as specified and directed.
155Disconnecting & taking down existing ceiling fan / exhaust fan / geyser of any capacity, any make, any size and depositing in store yard of AGE E/M and refixing the same serviciable ceiling fan / exhaust fan / geyser including making connections with DBs/Sub main and testing complete all as specified and directed.
156Supply, installing and testing out door wheather proof bus bar chamber of size 60 cm x 40 cm x 25 cm made out of 3.15mm MS sheet having one side openable hinged door shutter with locking arrangement/Provn of two No 60 Cm long 40x40x6mm angle iron legs welded and 4 Nos aluminium bus bar of 200 Amp rating and incoming MCCB 100 Amps adjustable thermal magnatic release type complete errected on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland, lugs/thimbles complete including taking down old unserviceable bus bar chamber complete all as specified and directed.
157M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron 32mm x 6mm earth lead strip by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part I and connection to machinery/equipment/main switch board or panel and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to adistance not exc 50 metre,PCCchamber (1:3:6) type C-2, charcoal and saltmixed layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and40 mm bore 3.00 metre long GI pipe light grade for earth lead strip protection, 75 mm thick RCC cover 1:2:4 type B-1 shall be provided on CI frameetc complete all as specified & as directed.
158M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part I and connection to main switch board or panel and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to adistance not exc 50 metre,PCCchamber (1:3:6) type C-1, charcoal and saltmixed layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, 75 mm thick RCC cover 1:2:4 type B-1 shall be provided on CI frame etc complete all as specified & as directed. Note : PCC chamber shall be constructed at least 1.5 m away from the earth electrode. The pipe for watering shall be provided in slanting manner
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail