}

Providing Installing Testing Commissioning And Handing Over Of New Medical Gases Pipe Line From Medical Gas Plant Room To Main Riser Of Block A And C Gmch, Sector-32, Chandigarh , Chandigarh-Chandigarh

Chandigarh Administration Engineering Department has published Providing Installing Testing Commissioning And Handing Over Of New Medical Gases Pipe Line From Medical Gas Plant Room To Main Riser Of Block A And C Gmch, Sector-32, Chandigarh . Submission Date for this Tender is 20-09-2021. Medical Gas System Tenders in Chandigarh Chandigarh. Bidders can get complete Tender details and download the document.




Tender Notice

29148450
Providing Installing Testing Commissioning And Handing Over Of New Medical Gases Pipe Line From Medical Gas Plant Room To Main Riser Of Block A And C Gmch, Sector-32, Chandigarh
Open Tender
Indian
Chandigarh
Chandigarh
20-09-2021

Tender Details

Providing Installing Testing Commissioning And Handing Over Of New Medical Gases Pipe Line From Medical Gas Plant Room To Main Riser Of Block A And C Gmch, Sector-32, Chandigarh

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Providing Installing Testing Commissioning & Handing Over of New Medical Gases Pipe Line from Medical Gas Plant Room to Main Riser of Block A&C GMCH, Sector-32, Chandigarh.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2All kinds of soil.
3Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
41:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
5Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
61:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
71:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
8Centering and shuttering including strutting, propping etc. and removal of form for :
9Suspended floors, roofs, landings, balconies and access platform
10Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
11Thermo-Mechanically Treated bars of grade Fe-500D or more.
12Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
13Cement mortar 1:4 (1 cement : 4 coarse sand)
14Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
15In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1612 mm cement plaster finished with a floating coat of neat cement of mix :
171:3 (1 cement: 3 fine sand)
18Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
19Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
20Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :
21bituminous road
22Isolation valve -Providing and Fixing of isolation valve and all valves are to be ball valves type and PTFE or Teflon seals. They shall be suitable for a working pressure of 10.2 Kg/cm² gauge. Valves shall be fitted into the pipeline by means of capillary hard soldered joints contanining silver it should be open/close with help of handel with rotation of 90 degree with brass fitting at both end for Medical Gas Pipeline. Make: Legris, Matrix, Audco, Cimberio (CIM), L&T.
2328mm
2442mm
2554mm
2676mm (Flenzed)
27Copper Piping alongwith fittings:- Supply, Installation Testing, Commissioning of copper pipes, forMedical Gases, complete with elbows, flanges, specials, others fittings, andsteel suppots. The copper pipe should be of soild drawn seamless deoxidized, un-arsenical, tempered and of degreased material conforming to BS-EN 13348/ASTM B819, of copper pipe must be certified and inspected by third party inspection agency like Loyed/SGS etc. Test certificate to be supplied alongwith supply of material to entire satisfaction/ direction of EIC. Make :-Maxflow, Mandev, Metalco, Rajco Tubes.
2828mm x 0.9mm
2942mm x 1.2mm
3054mm X 1.2mm
3176mm X 1.5mm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail