Municipal Corporation-MC has published Supply And Fixing Of Outdoor Gym Equipment, Garden Play Equipment And Cast Iron Gazebo At Various Garden Of Municipal Corporation Singrauli Waidhan Zone Including One Years Maintenance.-Chest Press Cum Seater Puller , . Submission Date for this Tender is 05-10-2021. Gym Equipment Tenders in Municipal Corporation Singrauli Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Sep-2021 | date extended | Date | 05-10-2021 |
| Sl. No. | Item Description |
| 1 | Non SOR Item |
| 2 | CHEST PRESS CUM SEATER PULLER • DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). • SAFE AREA: - 3.0Mtr x 1.7Mtr. • Chest press cum seated puller equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100NB made up of “B” Class G.I. pipe. • The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. • The connecting pipes are made up from 25NB “B” class G.I. pipe. • The handle frame is made up from 32NB “B” class G.I. pipe. • To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • Foundation cover Cap is made from Injection Moulded Plastic LLDPE /HDPE. • Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. • The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for locking is made up of A24 & A16 • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. |
| 3 | SKY WALKER • DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height) • SAFE AREA: - 2.7Mtr x 1.6Mtr. • Sky Walker Equipment made from “B” class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetersThe main frame pipe is of 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. • The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. • Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, pins and handle. • The handle frame is of 25mm NB made from “B” Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class. Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support. • The footrests made from Injection Moulded Plastic LLDPE / HDPE. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø 25mm SAE8620 bright material. Pins are fixed at the outer end with M8 grub screws and Dia.8mm SS ball. • The bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts & bolts are used for assembly. • The cerclips used for assembly are of A24 type. • The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. |
| 4 | SEATING AND STANDING SEATER • DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height). • SAFE AREA: - 3 Mtr x 1Mtr. • Seating & Standing Twister equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mm NB made from “B” Class G.I. Round Pipe. • The M.S. round plate of Ø250mm X 10mm thickness is welded at bottom. • Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. • The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from “B” class G.I. pipe. • The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from “B” class G.I. pipe of 25mm NB. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class, Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 |
| 5 | AIR WALKER ? Length:- 1200mm ? Width:- 400mm ? Height:- 1290mm ? Safe Play Area:- 2.0 Mtr X 1.8 Mtr ? Air Walker equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. ? 80mm NB:- Air Walker Prime Stand duly bend, Foundation center pipe. ? 32mm NB:- Air Walker pedal frame, |
| 6 | ROWER ? Length:- 1200mm ? Width:- 1000mm ? Height:- 800mm ? Safe Area:- 1.5 Mtr X 1.5 Mtr ? Rower equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. ? 80mm NB:- Rower Base link, Foundation main pipe. ? 50mm NB:- Rower Upper link. ? 25mm NB:- Connecting links, handle link duly bend. ? MS Angle 23 x 23 x 1.8mm:- Foundation support frame. MS pipe 19 x 38 x 1.8mm:- Foundation support frame. ? F50mm seamless pipe:- Bushes. ? MS sheet of size 330 x 300 x 1.8mm:- Rower Seat ? SS 304 material:- Bearing end caps. ? MS bright material:- Pins made of Dia.17mm. ? Bearings:- Permanent lubricated bearings “6203” of reputed brand are used. ? Nut & Bolts:- High tensile steel with galvanized nut & bolts are used. ? Circlips:- The circlips are used for locking is made up of A16. ? Handle grips:- Handle grips are of high quality rubber material. ? Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness. |
| 7 | SHOULDER BUILDER ? DIMENSIONS: - 900mm (Length) x 900mm (Width) x 1580mm (Height). • Safe Area:- 1.9Mtr X 1.9Mtr • Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The Center Pipe is of 100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness. • Sleeve provided of M.S. seamless pipe of Outer diameter 125mm with thickness 5mm provided. • The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Mainpipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø 25 mm of SAE8620 bright material. • The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly is of A 24. • The nylon bush is used for handle knob. • The powder coating done with Pure Polyester powder of Ackzonoble or Berger Paints with 60 to70 micron thick. • foundation Cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE. |
| 8 | LEG PRESS ? DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height). • SAFE AREA:- 2.8 x 1.4Mtr. • Leg Press equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from “B” Class G.I. pipe. • The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame. • The bottom support of M.S. round plate of Ø250mm & 10mm thick. • The remaining outer frame is of 32NB made from “B” class G.I. pipe. • The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • The footrests are made from Injection Moulded Plastic LLDPE / HDPE with the support of 310mm X 130mm X 3mm thick MS plate. • The frame of footrests made up of 25 NB “B” class G.I. pipe. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • To build structure bushes are used which are made from M.S. seamless pipe of 50mm OD and 5mm thickness. • The pins used are made up of Ø25 mm SAE 8620 bright material. • The bearings used are of “6205zz” permanent lubricated sealed bearing of reputed Brand. • High tensile steel with galvanized nut bolts are used for assembly. • Foundation Cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE. • The cerclips used for assembly are of A24 mm. • The powder coating done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. |
| 9 | SIT UP BOARD DOUBLE ? Length:- 1950mm Width:- 1350mm ? Height:- 700mm ? Safe Area:- 2.5 Mtr X 1.6 Mtr ? Sit Up Board equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. ? 100mm NB:- Centre column. ? 80mm NB:- Foundation main pipe. ? 50mm NB:- Footrest, Sit up board support. ? 32mm NB:- Handle frame, Seat frame, support. ? 25mm NB:- Sit up board support frame, Connecting links, handle. ? MS pipe of Dia.125 X 3mm:- For prime stand sleeve. ? MS Angle 23 x 23 x 1.8mm:- Foundation support frame. ? MS pipe 19 x 38 x 1.8mm:- Foundation support frame. ? MS plate of 8mm:- Sit up board profile. ? FRP material:- Sit up board. ? HDPE / LLDPE Plastic:- Closing caps, Base Cover. ? Nut & Bolts:- High tensile steel with galvanised nut & bolts are used. ? Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness. |
| 10 | SURF BOARD ? DIMENSIONS: - 910mm (Length) x 860mm (Width) x 1400mm.(Height). • Safe Area:-1.39 x 1.27Mtr. • Surf Board Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters • The center pipe is of 100mm NB made from “B” class G.I. pipe. The sleeve pipe is of 125mm OD seamless pipe with thickness of 5mm and bolted to main frame with M10 SS bolts. • The bottom support welded of M.S. plate of Ø 250 mm & 10mm thickness. • The handle frame is of 25NB made from “B” class G.I. pipe. • The paddle frame is of 50NB made from “B” class G.I. pipe is supported with 70X8 mm bend M.S. flat and can be replaceable. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Bushes are used 70mm Outer Diameter with 5mm thickness is used. • The footrests made from Injection Moulded Plastic LLDPE / HDPE. • For support to footrest 200mmX250mm with 3mm thickness M.S. Plate used. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • The pins used are made up of Ø35 mm SAE 8620 bright material. • The bearing used are of “6007zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly is of A34. • The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. |
| 11 | HOPPING SEE SAW AREA : 2.0 M X 0.5 M HEIGHT : 1.0 METER LEG SUPPORT : 60MM ODMS HAND RAILING : 32MM ODMS BASE : MS ANGLE 35 x 35x 5 PAINT & COATING : 2 Layers Of Reputed Make Paint Or Oven Baked Powder Coating Whichever Is Feasible. |
| 12 | FRP PYRAMID SWING AREA : 3.0 M X 4.6 M HEIGHT : 3.96 METER TOP BAR : 60MM/ 75MM/ 90MM ODMS LEG SUPPORT : 60MM/ 75MM/ 90MM ODMS HORIZONTAL SUPPORT : 32 MM ODMS SWING SEATS : 2 NOS FRP SEAT 5MM THICK ACCESSORIES : 4 NOS. SWING CLAMP / GI CHAIN 8MM PAINT & COATING : 2 Layers Of Reputed Make Paint Or Oven Baked Powder Coating Whichever Is Feasible |
| 13 | BIKE RIDER AREA : 0.75 M X 0.3 M HEIGHT : 0.75 METER STAND : 90MM ODMS SINGLE POLE HANDLE : 25MM ODMS SEATING ARRANGEMENT : PLY WITH FRP LAMINATION MOVEMENT & BALANCING : BIG SPRING. BASE PLATE : MS SQUARE PLATE 7”x 7” – 5MM PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE. |
| 14 | STANDING THRILL DIAMETER : 1.06 METER HEIGHT : 1.2 METER CENTRAL SUPPORT : 75MM ODMS LEG SUPPORT : 48MM ODMS HANDLE : 25MM ODMS BASE : RING MADE OF 32MM ODMS BALANCING : BIG SPRING. PAINT & COATING : 2 Layers Of Reputed Make Paint Or Oven Baked Powder Coating Whichever Is Feasible |
| 15 | ROCK CLIMBER ROCK CLIMBER AREA : 2.4 M X 1.8 M HEIGHT : 2.1 METER OUTER FRAME : 48MM ODMS ONE END FRAME : 20M ODMS WITH NET SECOND END FRAME : FRP ROCK CLIMBER THICK 3MM PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 16 | ORBIT CLIMBER AREA : 2.4 M X 1.2 M HEIGHT : 2.4 M VERTICAL SUPPORT : 60MM ODMS LADDER : 25MM ODMS GLOBE : 40MM ODMS INNER FRAME : 32 MM ODMS PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 17 | PUPPY DUST BIN LENGTH : 2. 25’ FEET WIDTH : 2.25’ FEET HEIGHT : 2.50’ FEET MATERIAL : FRP WITH 3MM THICK PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE. |
| 18 | FAT STEM LENGTH : 2. 50’ FEET WIDTH : 2. 50’ FEET HEIGHT : 2. 25’ FEET MATERIAL : FRP WITH 3MM THICK PAINT & COATING : 2 Layers Of Reputed Make Paint Or Oven Baked Powder Coating Whichever Is Feasible |
| 19 | PUMPKIN LENGTH : 2. 0’ FEET WIDTH : 1. 5’ FEET HEIGHT : 3. 0’ FEET MATERIAL : FRP WITH 3MM THICK PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
| 20 | UNIPOLE GAZEBO WITH SEATING Providing and fixing Uni pole Gazebo with Seating, shown in the enclosed drawing; Octagonal gazebo of 16’center height. Interconnected with Cast Iron Arches & Grill’s and the roof covered with Fiberglass roof (Corrugated Sheets) on the structure made out in M.S. Pipes. The specification of Gazebo includes the pillars i.e. to be cast using silicon castings molds the pillars has the base of 16” diagonal, the length of the pillar is 3 mtr.The details of the various portion are given in the drawing alongwith foundation details. The Gazebo shall be painted by attractive antique looking paint of copper/gold colors with black base to give it a rich antique look with roof of Fiberglass roof (Corrugated Sheets). This color shall be of polyurethane type of paint and should make the gazebo look attractive. The Gazebo shall be exactly similar looking as shown in the enclosed drawing/picture. It shall have all similar features as shown in the enclosed drawing/picture. The weight of the Gazebo Approximate- 1800.0 Kg. With a tolerance of 3%. |
| 21 | FRP STICK CAST IRON GARDEN BENCH Providing & Fixing of Decorative Cast Iron benches with 10 nos. Frp wooden texture finished strips for seating & cast iron legs powder coated each legs weight 22.5 kg length of bench 1.5 mtr. Width 0.6 seating height 0.5 mtr. Above ground level. |
| 22 | GAZEBO Cast Iron Gazebo-Code No.-DGZ-003 (12’ x 12’) Providing and fixing Cast Iron Gazebo- code no. DGZ-003, shown in the enclosed drawing; Hexagonal gazebo of 14’center height. Interconnected with Cast Iron Arches & Grill’s and the roof covered with Fiberglass roof (Corrugated Sheets) on the structure made out in M.S. Pipes. The specification of Gazebo includes the pillars i.e. to be cast using silicon castings molds the pillars has the base of 10” diagonal, the length of the pillar is 2.5 mtr.The details of the various portion are given in the enclosed drawing along with foundation detail. The Gazebo shall be painted by attractive antique looking paint of copper/gold colors with black base to give it a rich antique look with roof of Fiberglass roof (Corrugated Sheets). This color shall be of polyurethane type of paint and should make the gazebo look attractive. The Gazebo shall be exactly similar looking as shown in the enclosed drawing/picture. It shall have all similar features asshown in the enclosed drawing/picture. The weight of the Gazebo Approximate- 1100.0 Kg. With a tolerance of 3%. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
