Municipal Corporation-MC has published Supply And Fixing Of Outdoor Gym Equipment, Garden Play Equipment And Cast Iron Gazebo At Various Garden Of Municipal Corporation Singrauli Morwa Zone Including One Year Maintenance.-Cycle , Cross Trainer , . Submission Date for this Tender is 05-10-2021. Dustbin Tenders in Municipal Corporation Singrauli Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 20-Sep-2021 | date extended | Date | 05-10-2021 |
Sl. No. | Item Description |
1 | Non SOR Item |
2 | CYCLE ? DIMENSIONS: - 1570mm (Length) x 570mm (Width) x 900mm. (Height). • SAFE AREA: - 2.5Mtr x 1.5Mtr. • Cycle equipment made from “B” class G.I. Pipe of different NB. (NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters) • The main frame of 50 NB made from “B” Class G.I. pipes. • M.S. round plate of Ø300 mm & 10mm thickness used to form a paddle assembly. • The handle frame is of 25NB made from “B” Class G.I. pipe. • The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mm X 2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 x 25 mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. • Pins used of Diameter 25mm are made up from SAE 8620 bright material. • Pins used of Diameter 13mm are made up from EN8 material with CRCA pipe 20X20mm of thickness 3.00mm for paddle assembly. • The bearings used are 6001zz & 6205zz permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nuts and bolts are used for assembly. • The circlip used for assembly are of A24 type. • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. |
3 | CROSS TRAINER ? Length:- 1320mm ? Width:- 510mm ? Height:- 1500mm ? Safe Area:- 2.0 Mtr X 1.2 Mtr ? Cross Trainer equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. ? 100mm NB:- Centre pipe support. ? 80mm NB:- Centre pipe duly bend, Foundation main pipe. ? 50mm NB:- Handle frame support. ? 40mm NB:- Pedal link. ? 32mm NB:- Handle frame. ? 25mm NB:- Handle grip duly bend. ? MS Angle 23 x 23 x 1.8mm:- Foundation support frame.MS pipe 19 x 38 x 1.8mm:- Foundation support frame. ? MS plate of 245 x 113 x 2.8mm:- Footrest support frame. ? F50mm seamless pipe:- Bushes. ? F60mm seamless pipe:- Bushes. ? F70mm seamless pipe:- Bushes. ? SS 304 material:- Bearing end caps, top cap. ? Aluminum material :- Cross Trainer footrest. ? MS bright material:- Pins made of Dia. 35mm, Dia.25mm & Dia.17mm. ? Bearings:- Permanent lubricated bearings “6007”, “6205” & “6203” of reputed brand are used. ? Nut & Bolts:- High tensile steel with galvanized nut & bolts are used. ? Circlips:- The circlips are used for locking is made up of A24 & A16. ? Handle grips:- Handle grips are made up of high quality rubber material. ? Powder coating:- The powder coating done with Pure polyester powder of Ackzonoble or Berger with 60 to 70 micron thickness. |
4 | MULTIFUNCTION TRAINER ? Length:- 645mm ? Width:- 630mm ? Height:- 2000mm ? Safe Area:- 3.0 Mtr X 1.6 Mtr ? Multifunctional Trainer / Knee Hip Riser equipment made up of “B” class GI pipe of different NB. NB stands for Nominal Bore size i.e. Internal Diameter of pipe in millimeters. ? 80mm NB:- Main frame duly bend, Foundation center pipe. ? 25mm NB:- Handle frame, Back rest. ? CRC pipe of 78 x 38 x 1.8mm:- Handle support pipe.MS Angle 23 x 23 x 1.8mm:- Foundation support frame. ? MS pipe 19 x 38 x 1.8mm:- Foundation support frame. ? F60mm Solid pipe:- Bushes. ? HDPE / PPCP Plastic:- Closing caps, Base Cover. ? MS bright material:- Pins made of Dia.25mm. ? Handle grips:- Handle grips are made up of high quality rubber material. ? Powder coating:- The powder coating done with Pure polyster powder of Ackzonobel or Berger with 60 to 70 micron thickness |
5 | THAI CHI SPINNER 4 WHEEL Thi-chi spinner Equipment made from “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. • The center pipe is of 100NB made up of “B” Class G.I. pipe • The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. • The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. • The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. • Foundation cover Closing Cap is made from Injection Moulded Plastic LLDPE / HDPE. • Closing Caps are made up of Injection Moulded Plastic LLDPE / HDPE. The pins used are made up of Ø 25 mm of SAE 8620 bright material. • The bearing used is “6201zz” & “6205zz” permanent lubricated sealed bearing of reputed brand. • High tensile steel with galvanized nut bolts are used for assembly. • The cerclips used for assembly is of A 24. • The nylon bush is used for handle knob. • The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. |
6 | BENCH WITH FIXED WEIGHT ? PRODUCT DIMENSIONS: - 1200mm (Length) x 1200mm (Width) x1750 mm (Height). ? SAFE WORKOUT AREA: - 2500mm (Length) x2000mm (Width). ? Bench with fixed weight lift equipment made up of “B” Class G.I. pipe of different NB.NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. ? Main frame:- Dia. 50 mm NB “B” class GI pipe duly bend. ? Bench frame:- 38x18mm MS pipes are used. ? Handle Bar:- Dia. 25mm MS Solid bright bar is used. ? Weight plate:- Weight plates are used for weight lifting.The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness |
7 | LEG STRETCHER ? Length :- 650mm ? Width :- 650mm ? Height :- 1100mm ? Safe Area :- 2.8 Mtr x 1.4 Mtr ? Leg Press made up of “B” class GI pipe of different NB. NB stands for Nominal ? Bore size i.e. Internal Diameter of pipe in millimeters. ? 100mm NB: - Main frame. ? 25mm NB: - Snake frame of leg stretcher. ? MS Angle 23 x 23 x 1.8mm: - Foundation support frame. ? MS pipe 19 x 38 x 1.8mm: - Foundation support frame. ? HDPE / PPCP Plastic: - Closing caps, Base cover. ? Sticker Plate: - SS 304 material Sticker plate duly riveted on MS plate of 5mm thick. ? Powder coating:- The powder coating done with Pure polyster powder of Ackzonoble or Berger with 60 to 70 micron thickness. |
8 | ROTARY THRILL MGR AREA : 1. 5 M DIAMETER TOTAL HEIGHT : 1. 0 M FOUNDATION PIPE : 40MM ODMS CENTRE PIPE : 60MM ODMS CONNECTING SUPPORT : 32MM ODMS HANDLE : 25MM ODMS SEATS : FRP SEATS 3 MM THICK BEARING : HEAVY DUTY BALL BEARING (6312) PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
9 | FRP STICK CAST IRON GARDEN BENCH Providing & Fixing of Decorative Cast Iron benches with 10 nos. Frp wooden texture finished strips for seating & cast iron legs powder coated each legs weight 22.5 kg length of bench 1.5 mtr. Width 0.6 seating height 0.5 mtr. Above ground level. |
10 | TWISTER CLIMBER AREA : 2.1 M X 2.4 M HEIGHT : 2.1 M CENTER SUPPORT : 90MM ODMS VERTICAL SUPPORT : 40MM ODMS OUTER FRAME : 48 MM ODMS LOOPS FRAME : 32 MM ODMS PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
11 | SMALL MGR PLATFORM AREA : 1. 2 M DIAMETER TOTAL HEIGHT : 1. 0 M FOUNDATION PIPE : 40MM ODMS CENTRE PIPE : 60MM ODMS OUTER FRAME : 32MM ODMS HANDLE : 25MM ODMS BASE & SEATS : MS SHEET 18 GEJ BEARING : HEAVY DUTY BALL BEARING (6312) PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
12 | DUCK MGR AREA : 1. 5 M DIAMETER TOTAL HEIGHT : 1. 0 M FOUNDATION PIPE : 40MM ODMS CENTRE PIPE : 60MM ODMS CONNECTING SUPPORT : 32MM ODMS HANDLE : 25MM ODMS SEATS : FRP DUCK - 4 NOS. BEARING : HEAVY DUTY BALL BEARING (6312) PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
13 | CIRCULAR MGR TOTAL AREA : 1.2 M . DIAMETER TOTAL HEIGHT : 1.0 M CENTER PIPE : 60 MM ODMS PIPE OUTER FRAME : 32 MM ODMS PIPE HANDLE : 32 MM ODMS PIPE BEARING : HEAVY DUTY BALL BEARING (6312) PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE.. |
14 | MOUNTAIN CLIMBER AREA : 2.1 M X 2.1 M HEIGHT : 3.0 METER LEG SUPPORT : 48MM ODMS OUTER FRAME ( RINGS) : 32 MM. ODMS PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
15 | SPIRAL SLIDE BIG AREA : 2. 4 M X 1.7 M. SAFE AREA : 3. 4 M X 2.7 M. PLATFORM HEIGHT : 3.0 M SLIDE LENGTH : 3.0 M in FRP PIECES SLIDE THICNKESS : 5 MM CENTRE SUPPORT : 75 MM ODMS PIPE LADDER & RAILING : 20MM & 25MM ODMS LADDER STEPS : 2 “ x 1” RECTANGLE PIPE SQ. PLATFORM : 20” x 20 ‘ size made with ms sheet 18 guage & ms angle 35*35*5 support PAINT & COATING : 2 Layers Of Reputed Make Paint Or Oven Baked Powder Coating Whichever Is Feasible |
16 | RUBBER BELT ARCH SWING AREA : 3.0 M X 1.5 M HEIGHT : 2.4 METER TOP BAR : 60MM ODMS LEG SUPPORT : 60MM ODMS HORIZONTAL SUPPORT : 32MM ODMS SWING SEATS : RUBBER BELT SEATS 9MM THICK ACCESSORIES : SWING CLAMP / “S” HOOK / GI CHAIN 8MM PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
17 | FRP SLIDE 10 FT. AREA : 4.2 M X 0.6 M. SAFE AREA : 5. 2 M X 1.6 M. PLATFORM HEIGHT : 1.5 M SLIDE LENGTH : 3.0 M SLIDE THICNKESS : 5 MM LEG SUPPORT : 48 MM ODMS PIPE LADDER & RAILING : 20MM & 25MM ODMS LADDER STEPS : 2 “ x 1” RECTANGLE PIPE SQ. PLATFORM : 2’ X 2 ‘ SIZE MADE WITH MS SHEET 18 GUAGE & MS ANGLE 25*25*3 SUPPORT PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
18 | ADVENTURE ROCK CLIMBER AREA : 2.4 M X 2.4 M HEIGHT : 2.1 METER VERTICAL SUPPORT : 75MM ODMS TOP STRUCTURE : NYLON ROPE NET INNER FRAME : 32MM ODMS WITH ROMAN RING FRP ROCK WITH FIBER LAMINATION PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
19 | ICE CREAM DUST BIN DIA : 0. 60 MTR HEIGHT : 1. 20 MTR MATERIAL : FRP WITH 3MM THICK PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
20 | RABBIT DUST BIN DIA : 1. 60 MTR HEIGHT : 1. 30 MTR MATERIAL : FRP WITH 3MM THICK PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
21 | BUNNY DUST BIN DIA : 1. 40 MTR HEIGHT : 1. 00 MTR MATERIAL : FRP WITH 3MM THICK PAINT & COATING : 2 LAYERS OF REPUTED MAKE PAINT OR OVEN BAKED POWDER COATING WHICHEVER IS FEASIBLE |
22 | MULTIPLAY STATION NEW HUNGAMA MULTIPLAY STATION Area : 26 x 15 feet Height : 13 Feet Hexagonal Deck : 2 Nos. Wave Slide 10 feet : 1 No. Tube Slide 10 Feet : 1 No. Spiral Slide 5 feet : 1 No. Rock Climber 5 feet : 1 No. FRP Bridge 8 Feet : 1 No. Spiral Climber 5 Feet : 1 No. Loop Ladder : 1 No. Canopy : 2 Nos. ( Hexagonal) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail