Miscellaneous Civil Works In Power House At Ptpp Parichha Earth Work In Excavation All Kind Of Soil By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30Cm In Depth 1.5M In Width As Well As 10 Sqm On Plan ) Including Di, Parichha TPP Parichha Jhansi-Uttar Pradesh

Miscellaneous Civil Works In Power House At Ptpp Parichha Earth Work In Excavation All Kind Of Soil By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30Cm In Depth 1.5M In Width As Well As 10 Sqm On Plan ) Including Disposal Of Excavated Earth, Lead Up To 50M And Lift Up To 1.5M Disposed Earth To Be Levelled And Neatly Dressed.All Kind Of Soil. 2 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. 3 Surface Dressing Of The Ground In All Kind Of Soil Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M 4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level: 1:4:8 ( 1 Cement: 4 Coarse Sand :8 Graded Stone Aggregate 40 Mm Nominal Size ) . 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level: 1:2:4 ( 1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size ) . 6 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up To Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement: 1:1.5:3 ( 1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size ) 7 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level :Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 8 Structural Steel Work Riveted, Bolted Or Welded In Built-Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 9 As Above Item No. 8 But Steel Shall Be Issued By The Department Free Of Cost. 10 Brick Work With Fly Ash Bricks ( Non Modular ) Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 11 Half Brick Masonry With Non Modular Fly Ash Bricks Of Class Designation 10, Conforming To Is : 12894, In Super Structure Above Plinth And Upto Floor V Level : Ement Mortar 1 : 3 ( 1 Cement : 3 Coarse Sand ) 12 Brick Work With Clay Flyash F.P.S. ( Non Modular ) Brick Of Class Designation7.5 In Superstructureabove Plinth Level Up To Floor Five Level In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 13 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : 14 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete 15 Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 16 Columns, Pillars, Piers, Abutments, Posts And Struts 17 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Leveling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand :12 Graded Stone Aggregate 20 Mm Nominal Size ) At Plinth Level With: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 18 12 Mm Cement Plaster Of Mix 1:6 ( 1 Cement : 6 Coarse Sand ) 19 Extra For Providing And Mixing Water Proofing Material In Cement Concrete Work @ 1 Kg Per 50 Kg Of Cement. 20 Neat Cement Punning. ( 6Mm Plaster ) 21 Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete:40 Mm Thick With 20 Nominal Size Stone Aggregate. 22 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position: Sal Wood. 23 Clearing Grass And Removal Of The Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. 24 Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces ) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required:0.80 Mm Thick With Zinc Coating Not Less Than 275 Gm / M2 25 Providing Ridges Or Hips Of Width 60 Cm Over All Width Plain G.S. Sheet Fixed With Polymer Coated J, Or L Hooks, Bolts And Nuts 8 Mm Dia.. G.I. Limpet And Bitumen Washers Complete. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm / M2 26 Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer.Using M.S. Angles 40X40x6mm For Diagonal Braces. 27 Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Is : 6315 Marked, For Doors Including Coast Of Cutting Floors As Required, Embedding In Floors And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge.With Stainless Steel Cover Plate. 28 Prefixing Old Glass Panes With Putty And Nails. 29 Providing & Fixing Fully Glazed Anodized Aluminum Fixed Glazing With Hindalco Or Equivalent Extruded Standard Sections Of Various Thickness Show In Extruded Standard Sections Of Various Thickness Shown In Drawing Joints Mitered And Jointed As Shown In Drawing Including Providing And Fixed Of 5.5 Mm Thick Glass With Neoprene Beading All Round. The Minimum Thickness Of Anodizing On All Aluminum Sections Should Be 20 Micron With A ( + ) 2 Microns Tolerance. The Rate Should Include The Cost Of Fixing Of All Frame To Teak Wood Frame Or With Masonry / Rb / Rcc Structure By There Of Starting From 100 Mm Above The Bottom In Vertical Member Excluding Cost Of Teak Wood Frame. But Including Cost Of All Other Materials, Labour T&P Etc. Complete Required For Proper Completion Of Work. 30 Same As Item Above But For Openable Window Portion As Shown In Drawings, Including Providing & Fixing Aluminum Hinges Of Heavy Quality And All Other Fitting Like Concealed Tower Bolts Handles Etc. As Per Direction Of Engineer-In-Charge Required For Proper Completion Of Work. 31 Same As Item Above But For Openable Gate / Doors Portion As Shown In Drawings Including Providing And Fixing Pivots Of Heavy Quality And All Other Fittings Like Concealed Approved Tower Bolts, Bush Plate ( As Shown In Drawing ) And Approved Standard Brass Body With Brass Components 6 Levers Heavy Duly Concealed Lock Etc. Required For Proper Completion Of Work. 32 Renewing Glass Panes, With Putty And Nails Wherever Necessary: Float Glass Panes Of Thickness 5.5 Mm. 33 Carriage Of Material By Mechanical Transport Including, Loading, Unloading And Stacking Up To 2 Km:Earth, Building Rubbish Etc . ( Rate Applicable After Deduction Of Void As Per Cpwd / Pwd Norms ) 34 Providing And Laying 60 Mm Thick Factory Made Cement Concrete Interlocking Pavers Block Of M-30 Grade Made By Block Making Machine With Strong Vibratory Compaction And Of Approved Size And Design / Shape Laid In Required Color And Pattern Over And Including 50 Mm Thick Compacted Bed Of Course Sand, Filling The Joints With Coarse Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. 35 Providing And Fixing Lst Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacture ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In- Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 36 Providing And Laying Polished Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water AbsorptionS Less Than 0.08% And Conforming To Is : 15622 Of Approved Make In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete: Size Of Tile 60X60 Cm. 37 Providing & Fixing Aluminum Sliding Door Bolts Isi marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required color or shade with nuts and screws etc. complete: 38 300x16 mm. 39 250x16 mm. 40 Providing & fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to requiredcolor or shade with necessary screws etc. complete: 41 300x10 mm 42 250x10 mm 43 200x10 mm 44 150x10 mm 45 100x10 mm 46 Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade with necessary screws etc. complete: 47 125x75x4 mm 48 100x63x4 mm 49 100x63x3.2 mm 50 75x63x3.2 mm 51 Providing and fixing ball bearing for rolling shutters. 52 Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufactures specifications including appropriate priming coat, preparation of surface, etc. complete:On concrete work. 53 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand).Dark shade using ordinary cement. 54 Providing and fixing 8 mm. thick gypsum board in false ceiling other places where over in required including supplyall materials, labors, T&P etc. required for proper completion of work. 55 Attending to petty maintenance service like plumbing, Welding, carpentering, mason with one carpenter plumber or mason and one helper perhour. 56 Providing and groutingwith convextra G.P.-2 of standard quality approved byEngineer - in - chargeincluding chipping of RCC and including all labors, T&Petc. complete. 57 Providing and laying master floor HD of three components epoxy based heavy duty concrete to provide a rough lookingextremely strong beddedscreed motor mixed as prescribed by themanufactures including supply of all material, labors, T&P etc. required for proper completion of work. 58 Applying a thick coatof epoxy based two componentproductMaster prime C.N. non solvent resin and hardener by in ratio prescribed by the manufactures after cleaning of surface bychipping, hard wire brushingandwashingfirstwith kerosene oil and than water to make the surface free from oil, grease and any other loose particles etc. and than drying the surface before applying epoxy coat includingsupply of all labour, material and T&P etc. required for proper completion of work. 59 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete:With residual type petroleum bitumen of grade VG -10 60 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self-finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimetre per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 61 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 62 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 63 Providing jack hammer with compressor its lead and Operator for making hole in slab and breaking R.C.C. and exposing existing reinforcement complete with all T&P labour etc. for proper completion of work as per direction of Engineer-in-Charge 64 Hiring J.C.B machine with driver/operator, fuel all T&P labour etc. for proper completion of work as per direction of Engineer-in-Charge 65 Supply & fixing of lever of top portion of aluminium door with required for proper completion of work. 66 Providing & fixing rubber linner of approved manufacture in aluminium glazed door and window in power house area including cost of all labour,material and T&P etc. required for proper competion of work. 67 Providing & fixing aluminium beading and screw in glazed door & window including cost of all material,labour T&P etc. 68 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) :Flat surfaces 69 Installation & runningof 1HP /0.5 HP Elctric/Diesel Engine Motor Pump set with suction of 5 Meter depth & delivery pipe up to the distance of 70 Meter in near by pit including cost of all hire charges of Motor Pump set, operator and fuel etc. complete as pr direction of Engineer in charge. 70 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge. 71 Supply of 100 mm long and 15 mm dia. G.I. nozzle includingcutting holes in RCC slab, column and beam including its fixing with cement labor, T&P and material complete (Ag. 04/AUD/PTPP/2011-12 dt. 27.05.2011) 72 Pressure grouting of crakes honey comb. In concrete surface expansion joints as required with cement grout of ratio one part of cement, four parts of water and 3% water proofing CIECO No.3 compound (liquids) with the help of grout pump of appropriate pressure excluding cost of filling of G.I. nozzles complete. 73 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Second class teak wood. (a) 30 mm thick shutters. 74 35 mm thick shutters 75 Providing and fixing aluminium round shape handle of outer dia100mm with SS screws etc. complete as per direction of Engineerin-charge.Anodized (AC 15 ) aluminium. 76 Installation & running of 5 HP /7.5 HP Elctric/Diesel Engine Motor Pump set with suction of 5 Meter depth & delivery pipe up to the distance of 70 Meter in near by pit including cost of all hire charges of Motor Pump set, operator and fuel etc. complete as pr direction of Engineer in charge. 77 Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortarbedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge 78 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile 79 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile 80 Epoxy adhesive 81 Coal boulder pitching 22.5 cm thick including cartage of coal boulder from coal handlling area and preparing surface complete.

INR 1180 /-

INR 50000.0 /-

INR 24.98 Lakhs /-

Name of Work:Miscellaneous Civil works in Power house at PTPP, Parichha.

Sl. No.	Item Description
1	Earth work in excavation all kind of soil by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m disposed earth to be levelled and neatly dressed.all kind of soil.
2	Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.
3	Surface dressing of the ground in all kind of soil including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m
4	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand :8 graded stone aggregate 40 mm nominal size).
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:2:4 (1 Cement: 2 coarse sand :4 graded stone aggregate 20 mm nominal size).
6	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 Cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)
7	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level :Thermo-Mechanically Treated bars of grade Fe-500D or more.
8	Structural steel work riveted, bolted or welded in built-up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
9	As above Item No. 8 but steel shall be issued by the department free of cost.
10	Brick work with fly ash bricks (non modular) of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand)
11	Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS : 12894, in super structure above plinth and upto floor V level : ement mortar 1 : 3 (1 cement : 3 coarse sand)
12	Brick work with clay flyash F.P.S. (non modular) brick of class designation7.5 in superstructureabove plinth level up to floor five level in : Cement mortar 1:6(1 cement : 6 coarse sand)
13	Centering and shuttering including strutting, propping etc. and removal of form for :
14	Foundations, footings, bases of columns, etc. for mass concrete
15	Lintels, beams, plinth beams, girders, bressumers and cantilevers
16	Columns, Pillars, Piers, Abutments, Posts and Struts
17	Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand :12 graded stone aggregate 20 mm nominal size) at plinth level with: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
18	12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand)
19	Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement.
20	Neat cement punning.(6mm plaster)
21	Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete:40 mm thick with 20 nominal size stone aggregate.
22	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: Sal wood.
23	Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
24	Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required:0.80 mm thick with zinc coating not less than 275 gm/m2
25	Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia.. G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m2
26	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal braces.
27	Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including coast of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate.
28	Prefixing old glass panes with putty and nails.
29	Providing & fixing fully glazed anodized aluminum fixed glazing with Hindalco or equivalent extruded standard sections of various thickness show in extruded standard sections of various thickness shown in drawing joints mitered and jointed as shown in drawing including providing and fixed of 5.5 mm thick glass with Neoprene beading all round. The minimum thickness of anodizing on all aluminum sections should be 20 micron with a (+) 2 microns tolerance. The rate should include the cost of fixing of all frame to teak wood frame or with masonry/RB/RCC structure by there of starting from 100 mm above the bottom in vertical member excluding cost of teak wood frame. But including cost of all other materials, labour T&P etc. complete required for proper completion of work.
30	Same as item above but for openable window portion as shown in drawings, including providing & fixing aluminum hinges of heavy quality and all other fitting like concealed tower bolts handles etc. as per direction of Engineer-in-charge required for proper completion of work.
31	Same as item above but for openable gate/doors portion as shown in drawings including providing and fixing pivots of heavy quality and all other fittings like concealed approved tower bolts, bush plate (as shown in drawing) and approved standard brass body with brass components 6 levers heavy duly concealed lock etc. required for proper completion of work.
32	Renewing glass panes, with putty and nails wherever necessary: Float glass panes of thickness 5.5 mm.
33	Carriage of material by mechanical transport including, loading, unloading and stacking up to 2 km:Earth, building rubbish etc .(Rate applicable after deduction of void as per CPWD/PWD norms)
34	Providing and laying 60 mm thick factory made cement concrete interlocking pavers block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required color and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-Charge.
35	Providing and fixing lst quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
36	Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption"s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete: Size of Tile 60x60 cm.
37	Providing & fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required color or shade with nuts and screws etc. complete:
38	300x16 mm.
39	250x16 mm.
40	Providing & fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to requiredcolor or shade with necessary screws etc. complete:
41	300x10 mm
42	250x10 mm
43	200x10 mm
44	150x10 mm
45	100x10 mm
46	Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade with necessary screws etc. complete:
47	125x75x4 mm
48	100x63x4 mm
49	100x63x3.2 mm
50	75x63x3.2 mm
51	Providing and fixing ball bearing for rolling shutters.
52	Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacture"s specifications including appropriate priming coat, preparation of surface, etc. complete:On concrete work.
53	Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand).Dark shade using ordinary cement.
54	Providing and fixing 8 mm. thick gypsum board in false ceiling other places where over in required including supplyall materials, labors, T&P etc. required for proper completion of work.
55	Attending to petty maintenance service like plumbing, Welding, carpentering, mason with one carpenter plumber or mason and one helper perhour.
56	Providing and groutingwith convextra G.P.-2 of standard quality approved byEngineer - in - chargeincluding chipping of RCC and including all labors, T&Petc. complete.
57	Providing and laying master floor HD of three components epoxy based heavy duty concrete to provide a rough lookingextremely strong beddedscreed motor mixed as prescribed by themanufactures including supply of all material, labors, T&P etc. required for proper completion of work.
58	Applying a thick coatof epoxy based two componentproductMaster prime C.N. non solvent resin and hardener by in ratio prescribed by the manufactures after cleaning of surface bychipping, hard wire brushingandwashingfirstwith kerosene oil and than water to make the surface free from oil, grease and any other loose particles etc. and than drying the surface before applying epoxy coat includingsupply of all labour, material and T&P etc. required for proper completion of work.
59	Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete:With residual type petroleum bitumen of grade VG -10
60	Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self-finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimetre per square metre, including preparation of surface but excluding grading complete with : Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322
61	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
62	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
63	Providing jack hammer with compressor its lead and Operator for making hole in slab and breaking R.C.C. and exposing existing reinforcement complete with all T&P labour etc. for proper completion of work as per direction of Engineer-in-Charge
64	Hiring J.C.B machine with driver/operator, fuel all T&P labour etc. for proper completion of work as per direction of Engineer-in-Charge
65	Supply & fixing of lever of top portion of aluminium door with required for proper completion of work.
66	Providing & fixing rubber linner of approved manufacture in aluminium glazed door and window in power house area including cost of all labour,material and T&P etc. required for proper competion of work.
67	Providing & fixing aluminium beading and screw in glazed door & window including cost of all material,labour T&P etc.
68	Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) :Flat surfaces
69	Installation & runningof 1HP /0.5 HP Elctric/Diesel Engine Motor Pump set with suction of 5 Meter depth & delivery pipe up to the distance of 70 Meter in near by pit including cost of all hire charges of Motor Pump set, operator and fuel etc. complete as pr direction of Engineer in charge.
70	Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge.
71	Supply of 100 mm long and 15 mm dia. G.I. nozzle includingcutting holes in RCC slab, column and beam including its fixing with cement labor, T&P and material complete (Ag. 04/AUD/PTPP/2011-12 dt. 27.05.2011)
72	Pressure grouting of crakes honey comb. In concrete surface expansion joints as required with cement grout of ratio one part of cement, four parts of water and 3% water proofing "CIECO" No.3 compound (liquids) with the help of grout pump of appropriate pressure excluding cost of filling of G.I. nozzles complete.
73	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Second class teak wood. (a) 30 mm thick shutters.
74	35 mm thick shutters
75	Providing and fixing aluminium round shape handle of outer dia100mm with SS screws etc. complete as per direction of Engineerin-charge.Anodized (AC 15 ) aluminium.
76	Installation & running of 5 HP /7.5 HP Elctric/Diesel Engine Motor Pump set with suction of 5 Meter depth & delivery pipe up to the distance of 70 Meter in near by pit including cost of all hire charges of Motor Pump set, operator and fuel etc. complete as pr direction of Engineer in charge.
77	Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortarbedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge
78	In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile
79	In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile
80	Epoxy adhesive
81	Coal boulder pitching 22.5 cm thick including cartage of coal boulder from coal handlling area and preparing surface complete.