Department Of Tourism has published Providing And Installation Of Floating Jetty Including Gangway Of Size 140 Sqm Including Consultancy Charges Of Preparing Structure Drawing, Design, Specification At Surinsar.Cno19 . Submission Date for this Tender is 24-09-2021. Jetty Tenders in Surinsar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | SITC (Floating Jetties HDPE withstainless steel railing superior quality andGangway of6 meter length |
2 | Floating Jetty Modules should be made of High Grade High Density Polyethylene whose melt flow rate should be less than 3 g / 10 min @ 190 Degree C and 21.6 kg Load |
3 | Floating Jetty Module should be of L: 50 cm, B: 50 cm, H: 40 cm |
4 | Weight of the Boat Parking Module should be 8-9 kgs |
5 | Load carrying capacity should be Minimum 300 kgs/sqm |
6 | The shape of the Floating Jetty Module should be 3-Dimensional male-female interlocking such that the Floating Jetty Module can interlock by themselves |
7 | Each Floating Jetty Module should have a Separate Anti-Skid Top Cover of 14-15mm Thickness fitted in the cervix of the main module |
8 | The top surface should be fitted inside the side walls of the Floating Jetty Module and it should be bolted in such a way that there is no leakage of water from the point in which bolt is fixed between top and below surface thus making the surface the best Anti Skid surface available worldwide |
9 | There should be one more surface below the top surface with a gap in between top surface and surface below to enable expansion contraction of Floating Jetty Module which can also be used for passing of electric cables & water hoses if required |
10 | The lug thickness of the Floating Jetty Module should be 20-21 mm to ensure enough strength to the structure |
11 | For Boats parking on Floating Jetty, HDPE ‘U Shaped’ Floating Jetty male-female interlocking module of dimension L: 100 cm, B: 50 cm, H: 29 cm and weight 11-12 Kgs with HDPE rollers should be fixed for smooth parking. The quantity of these modules will be dependent on site requirement and these can be interchangeable with the main modules if required |
12 | HDPE Heavy Duty Long Fender of L: 150 cm with 3 lugs to be fixed on the Floating Jetty Modules at required places using Nuts & Bolts of same material to protect Floating Jetty System from being hit directly by the Boats |
13 | Aluminium Side Bars with Rubber must be fixed in the lugs of the modules at required places on Floating Jetty System |
14 | Human Safety Railing of stainless steel Material to be provided for human safety along the perimeter with PVC/Teak wood covering |
15 | 1 Number of Aluminium Gangway of Length : 6 meter and width: 1 meter should be provided. It should be hinged at the shore side and should have rollers at another end |
16 | Supplying ofLife Jackets (Superior Quality) as approved by Engineer Incharge |
17 | Life Jacket should have Unique Stowage Design |
18 | Life Jacket should have 2 Nos. Reflective Tape Front / Back |
19 | Life Jacket should have 3 Nos. Polyester Webbing Belt attached with quick release Strong Buckle and Clip Slider Webbing Holder Easy to adjust |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail