Military Engineer Services-MES has published Special Repair To Bldg No P-47 And Other Sanctioned Works Under Age B / R P At Itarana Alwar Special Repair To Bldg No P-47 And Other Sanctioned Works Under Age B / R P At Itarana Alwar. Submission Date for this Tender is 06-10-2021. Building Repair Tenders in ALWAR Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Sep-2021 | Amendment1of8014 | Other | 22-09-2021 |
| 2 | 22-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-09-2021 |
| 3 | 28-Sep-2021 | Amendment2of8014 | Date | 06-10-2021 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying or cables, pipes etc not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil. |
| 3 | Removal of excavated soil/ material to a distance not exc 50 metre and depositing where directed at a level n. exc 1.50 metre above the starting point complete all as specified. |
| 4 | Surface dressing not exc 15cm deep in soft/loose soil. |
| 5 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil. |
| 6 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 7 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as specified & directed by Engr-in-Charge. |
| 8 | Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the shutters from the frame) complete all as specified |
| 9 | Taking down chowkat or frame with shutters area t exc. 1.5but not exc 4sqmSqm each (without taking off the shutters from the frame) complete all as specified |
| 10 | Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge. |
| 11 | Demolition of existing lime concrete/PCC padding, roof treatment of any thickness laid over RCC roof/chajja etc.,removing complete layer of bitumen under concrete/PCC padding, cleaning and washing of roof with water to remove dust etc as preparation to receive treatment all as directed by Engineer-in-charge. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises. |
| 13 | Supply & fixing in repairs vitreous china squatting pan (Orissa pattern) water closet (white) size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etcincluding provision of PCC (1:7:12) type F2 in filling complete all as specified. |
| 14 | M&L for rendering 15mm thick in cement plaster 1:4 on stone masonry or bricks or concretesurfacesof walls, finished even & smooth without using extra cement with water proofing compound @ 3% by the weight of cement, ( WPC measured and paid for separately) complete all as specified. |
| 15 | M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified. |
| 16 | M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified. |
| 17 | M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified. |
| 18 | Material and labour 75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as insub base, surface finished fair and evencomplete all as specified. |
| 19 | M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete. |
| 20 | M&L machine cut Kota stone slab flooring 20 to 25mm thicklaid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified. |
| 21 | M&L machine cut Kota stone slab 10 to 15mm thick , as in riser of step, skirting, dado etc. laid over & including screed bed or bedding layer of 10mm thick in CM 1:4 and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified. |
| 22 | M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth with using extra cement including Supply only glass dividing strips 3mm thick and 38mm wide.complete all as specified & as directed. |
| 23 | M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as inplinth protection surface finished fair and evencomplete all as specified. |
| 24 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as inplinth protection surface finished fair and evencomplete all as specified. |
| 25 | Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. |
| 26 | S&F mild steel framed work as in doors / gates / steel frames etc. of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165(Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete. |
| 27 | S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming toGrade E-165 (Fe 290) including necessary welding etc. and fixed in position. |
| 28 | Supply and fixing factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles,fixed to chowkat, complete all as specified & directed. |
| 29 | Supply & fixing factory made steel windows with side hung shutters including box type / projecting type hinges with steel handles and peg stay with glazing bars dovetailed or welded including one shop coat of Zinc Chromate primer complete all as specified. |
| 30 | Supply & fixing factory made steel windows with side hung shutters including box type / projecting type hinges with steel handles and peg stay without glazing bars dovetailed or welded including one shop coat of Zinc Chromate primer complete all as specified. |
| 31 | S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay, handle including one shop coat of Zinc Chromate primer complete all as specified. |
| 32 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement. |
| 33 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications. |
| 34 | Supply and fixing150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified |
| 35 | S&F extruded aluminium alloy handle, 125mm size, fabricated type, anodized (ISI marked) complete all as specified. |
| 36 | Supply & fixing butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete all as specified. |
| 37 | Supply and fixing300 mm long mild steel sliding door boltsclip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified. |
| 38 | Supply and fixing 200 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified |
| 39 | Supply and fixing 125 mm long mild steel pressed bow handle, oval type, stove enameled black complete all as specified |
| 40 | M&L for precast RCC 1:2:4type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed. Note :- Reinforcement shall be measured and paid for separately. |
| 41 | M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete,all as specified and directed. |
| 42 | All as per serial item No. 41.00 here-in-above but 6mm to 8mm dia. |
| 43 | M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 44 | Material and labour brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified. |
| 45 | M&L brick work with subclass "B" old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified. |
| 46 | M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed. |
| 47 | M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:6 all as specified and as directed. |
| 48 | Supply and fixing galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified. |
| 49 | Supply and fixing 3mm thick sheet glass ordinary quality and glazing with lineseed oil pane putty and spring glazing clipsor using silicon for fixing of glass in addition to putty as reqdin square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces glazing in repairs complete all as specified. |
| 50 | S&F 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, glazing in repairs, complete all as specified. |
| 51 | Material and labour preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 52 | M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified. |
| 53 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified. |
| 54 | M&L for precast cement concrete (1:2:4 type B0 using 12.5mm graded crushed stone aggregate) louvers and jallies, 35mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:6 all as specified & as directed. |
| 55 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar works of Gde E-165(Fe 290) including welding etc. complete all as specified & as directed. |
| 56 | M&L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 3mm thick weighing not less than 3.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process. It shall be laid by torch application having side over lap 75 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application. For parapet, membrane shall be taken to a height of minimum 60 cm and inserted inside the parapet in a groove to a depth of 65 mm. The same shall be finished by a membrane flashing. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. |
| 57 | M&Lfor padding with PCC 1:2:4,type B1 (using 20 mm graded crushed stone aggregate ) laid to a average thickness 50mm thick over roof slab etc as in levelling course, finished even & smooth w/o using extra cement. |
| 58 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I. |
| 59 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I. |
| 60 | Supply and fixing Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball, screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and as directed. |
| 61 | S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule. |
| 62 | S&F 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule. |
| 63 | Taking up or down 15mm bore steel tubing and connection incl cleaning for refixing or removal to store. |
| 64 | Taking up or down 20mm bore steel tubing and connection incl cleaning for refixing or removal to store. |
| 65 | Taking up or down 40mm bore steel tubing and connection incl cleaning for refixing or removal to store. |
| 66 | M&L galvanised steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 67 | M&L galvanised steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 68 | M&L galvanised steel water tubing medium grade of 40mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 69 | Refixing old steel tubing and connection in new or old position (wall, ceiling, floor etc) of 15mm bore of pipe. |
| 70 | Refixing old steel tubing and connection in new or old position (wall, ceiling, floor etc) of 20mm bore of pipe. |
| 71 | Refixing old steel tubing and connection in new or old position (wall, ceiling, floor etc) of 40mm bore of pipe. |
| 72 | S&Fin repairs 15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 73 | S&F20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 74 | S&F15mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 75 | S&F in repair chromium plated brass shower rose screwed for 15 mm bore GI pipe, 125 mm bore |
| 76 | Supply & fixing vitreous china bowl type urinal flat back, size of 465 x 355 x 265mm (minimum) white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified. |
| 77 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifiedincluding taking out old unserviceable pipe of any type with fittings and making good around complete all as specified and directed. |
| 78 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specifiedincluding taking out old unserviceable pipe of any type with fittings and making good around complete all as specified and directed. |
| 79 | Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including necessary excavation and earthwork complete all as specified |
| 80 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including necessary excavation and earthwork complete all as specified |
| 81 | Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified |
| 82 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified |
| 83 | Supply and fixing in repair 75 mm bore PVC (SWR) bends any radius with access door complete all as specified. |
| 84 | S&F 75mm bore PVC (SWR) branch piece, double (Double ‘Y’) equal or unequal with access door. |
| 85 | Supply and fixing in repair 110 mm bore PVC (SWR) bends any radius with access door complete all as specified. |
| 86 | S&F 110mm bore PVC (SWR) branch piece, double (Double ‘Y’) equal or unequal with access door. |
| 87 | S&F 110 mm bore PVC (SWR) reducer complete all as specified. |
| 88 | Supply and fixing 110 mm bore PVC (SWR) ISI marked vent cowl complete all as specified. |
| 89 | Supply and fixing in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified. |
| 90 | Supply and fixing PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified. |
| 91 | S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) all as directed. |
| 92 | S&F in repair PVC (SWR) Nahani trap dia of outlet 75mm, with PTMT grating including jointing with solvent cement including taking out old unserviceable trap. |
| 93 | S&F PVC (SWR) floor trap dia of outlet 75mm, with PTMT grating including jointing with solvent cement including taking out old unserviceable trap. |
| 94 | S&FPVC (SWR) Gully trap 125/110mm, setting and jointing with solvent cement complete all as specified. |
| 95 | Supply and fixing as in repairs PVC valveless syphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified. |
| 96 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) (Ist quality) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 97 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in levelling course of floors and roofs25mm thick finished fair & even complete all as specified & as directed. |
| 98 | Material and labour glazed ceramic tiles (Ist quality) (coloured) 300mm x 450mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and as directed. |
| 99 | S&F 40mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipe. |
| 100 | S&F 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipe. |
| 101 | S&F in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges. |
| 102 | S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & as directed. |
| 103 | S&F in repairs 600mm x 450mm bevelled edge looking mirror of selected quality glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood including aluminium framing and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 104 | M&L factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed. |
| 105 | M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerb stone block (factory casted) with plain fair faces, including weathering, slightly rounded or chamfered angle throating, with plain or interlocking joints and setting in cement mortar 1:4, complete, all as directed. |
| 106 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applyingtwo coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including white wall care putty (make-Birla/JK/Asian) on walls all as specified & as directed. |
| 107 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including white wall care putty (make-Birla/JK/Asian) all as specified & as directed. |
| 108 | Material and labour preparation of newly plastered surface of walls & applying three coats of white wash complete all as specified. |
| 109 | M&L brooming down old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coats of white wash complete all as specified. |
| 110 | Material and labour preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified. |
| 111 | M&L preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed. |
| 112 | Material and labour preparation of newly plastered/asbestos cement surfaces of ceilings & applying three coats of white wash complete all as specified. |
| 113 | M&L brooming down old decorated plastered/asbestos cement surfaces of ceilings & applying one coats of white wash complete all as specified. |
| 114 | S&F 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 as in sheet lining to wooden door fixed with brass CP screws of size 25x8 including `U’ shaped edging all as directed. |
| 115 | M&L cutting out cracks to V-section in existing roofs or terracing, cleaning out, and solidly with a hot mixer bitumen and clean dry sand1:1 (by weight) etc. complete all as specified & as directed. |
| 116 | M&L for taking down and removal of loose / disintegrated old concrete / plaster and applying 3mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e.Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind New Cement plaster/ polymer Modified plaster/ concrete/ screed concrete with old surface etc complete. |
| 117 | M&L applying 15mm thick plaster with polymer modified mortar fortified with SBR (NitobondSBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45added to 50 KG Cement with 13 litre water addition, finished surface to match with existing adjoining surface of ceiling, beams and alike complete. |
| 118 | M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaningand removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughlycleaning washingair blowingbrushing etc complete. Note : Qty of Zinc based epoxyrust preventor only shall be taken into account for payment purpose on the basis of actual consumption. |
| 119 | M&L 12mm thick cement mortar plaster in 1:4 proportion (added with integral water proofing compound comp last X421 IC on the brick work / CC / RCC work or any other type of finish including removal of loose/disintegrated old concrete / plaster and surface preparation etc complete all as specified and directed by Engineer-in-Charge. |
| 120 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. |
| 121 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. |
| 122 | &F vitreous china wash down water closet (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. |
| 123 | Supply only integral water proofing compound (ISI marked). |
| 124 | M&L for 20mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including required cutting to suit the size of oval type wash hand basin over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed. |
| 125 | S&F in repairs pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or cold" long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe in 15mm dia. |
| 126 | S&Fpillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or cold" long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe in 15mm dia. |
| 127 | M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundations including rafts, footings, foundation beams, bases for columns, mass concrete and the like. Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 128 | M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in columns, pillars, piers, posts, struts and the like. Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 129 | M&L reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate in chajjas and the like. Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 130 | M&L reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span and the like. Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 131 | M&L reinforced cement concrete M-25 grade (Design mix) using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like. Note :- Reinforcement & formwork shall be measured and paid for separately. |
| 132 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete. |
| 133 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete. |
| 134 | M&L for formwork to flat surfaces of chajjas, chullah hoods, troughs and similar items including edges for rough finished surfaces. |
| 135 | M&L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete. |
| 136 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete. |
| 137 | M&L formwork to edges of concrete flats, roofs, floors etc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces. |
| 138 | M&L for hardcore of broken stone or boulders, gauge exc. 63mm but not exc 100mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed. |
| 139 | M&L anti-termite treatment to the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & as directed. |
| 140 | M&L anti-termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & as directed. |
| 141 | M&L anti-termite treatment to the soil under plinth protection at the rate of5 litres of emulsion per square metre of surface area complete all as specified & as directed. |
| 142 | Taking down carefully, copper/aluminium unserviceable /perished point wiring any type for light/ fan/ socket or power complete including fittings such asswitches, ceiling roses, pendant holders, lamp holders, bracket holders, regulators sockets, light fittings, lamps etc, and making good to disturbed surfaces of wall/floor/ceiling etc, complete, all as specified and directed. |
| 143 | Material and labour for point wiring for one light point controlled by one, one way switch with multistrand 1.50 Sqmm unsheathed copper conductor cable including continuous earth wire 1.5 Sqmm in green colour unsheathed copper conductor connected to common earth dolly in PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS in on existing sunken MS boxes fixed on wall for mounting switch, socket, regulators etc with and including 3mm thick phenolic laminated sheet top cover, complete, all as specified. |
| 144 | All as per description of serial item No. 143.00 above but for one fan point controlled by one switch and regulator complete all as specified and directed. |
| 145 | All as per description of serial item No. 143.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch, 5 Amp on same board. |
| 146 | All as per description of serial item No. 143.00 here-in-before but for one 3 pin socket outlet 5 Amps controlled by one switch, 5 Amp independent board. |
| 147 | All as per serial item No. 143.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour. |
| 148 | Supply and fixing switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts. |
| 149 | Supply and fixing switch piano flush type, single pole, one way, 15/16 Amp, 230 Volts. |
| 150 | Supply and fixing socket outlet for 2 & 3 pin, 5 Amp, flush type 240 Volt. |
| 151 | Supply and fixing socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt. |
| 152 | Supply and fixing ceiling rose surface Bakelite 65x50mm two or three terminals. |
| 153 | Supply and fixing decorative ultra slim liner LED lighting fixture with extended polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride and connecting up with and including white coloured flat/round twin core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fittingcomplete, all as specified & directed. Make :-Havells Cat Part No LHEXBLP7PN1W018or equivalent Make given in PS as approved by GE |
| 154 | Supply and fixing lamp holder, angularPVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 155 | Supply and fixing in holder Adore LED lamp 9/10 watt complete all as specified and directed. Make :-Havells Cat Part No LHLDERHEML8X010 or equivalent Make given in PS as approved by GE |
| 156 | Supply and fixing new fan regulators electronic step up type socket size and connecting up, ISI marked flush type, 240 Volts complete all as specified and directed. |
| 157 | Supply and fixing ceiling fan 1200 mm sweep suitable for 230 Volts, 50 Hz, AC supply with down rod & canopy including provision of fan hook in ceiling for fixing of ceiling fan including necessary electric connection with 1 Sqmm, three core, flexible copper multistranded conductor cable all as directed. |
| 158 | Supply and fixing in repairs sheet metal enclosures, double door type, suitable for fixing MCB,s, SPN with 200 Amps rated bus bar, 8 way, 240 volts. |
| 159 | Supply and fixing sheet metal enclosure, double door type, suitable for fixing MCBs, TPN with 200 Amps rated bus bar, 4 way, 240 volts. |
| 160 | Supply and fixing MCB 32 Amps, single pole & neutral, 240 Volts. |
| 161 | Supply and fixing MCB 6 to 32 Amps, single pole, 240 Volts. |
| 162 | Supply and fixing in repairs MCB 63 Amps, Triple pole & neutral, 240 Volts. |
| 163 | Supply and fixing sub main wiring on and including PVC casing caping, 1100 Volts grade cable, PVC insulated copper conductor and over all PVC unsheathed for sub main wiring multistranded conductor of 6 Sqmm single core cable and earth wire of 6 Sqmm unsheathed copper conductor complete. (Two run of cable with one run of earth wire should measured as one length) including taking down existing unserviceable sub main wiring. |
| 164 | Supply and fixing 2nd class hard wood rectangular block open recessed of size 60x45x5 cm depth with 3mm thick hylum/Bakelite sheet on top grouted with 4 Nos bolts. |
| 165 | Supply and fixing 2nd class hard wood rectangular block open recessed of size 30x25x5 cm depth with 3mm thick hylum/Bakelite sheet on top grouted with 4 Nos bolts. |
| 166 | Supply and fixing LED type street DRACO Series light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LEDcomplete, all as specified & directed. Make :- C&S Cat Part No LTESS20WLED or equivalent Make given in PS as approved by GE |
| 167 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 35 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified. Note :- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. |
| 168 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified. Note :- Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. |
| 169 | M&L galvanised steel water tubing light grade of 40mm bore with & including all fittings complete laid in trenches. Note :- Excavation & earthwork shall be measured & paid for separately. |
| 170 | Material and labour earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part I and connection to main switch board or panel and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to adistance not exc 50 metre,PCCchamber (1:3:6) type C-2, charcoal and saltmixed layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, 75 mm thick RCC cover 1:2:4 type B-1 shall be provided on CI frameetc complete all as specified & as directed. Note : PCC chamber shall be constructed at least 1.5 m away from the earth electrode. The pipe for watering shall be provided in slanting manner |
| 171 | M & L for dry sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required covercomplete all as specified and directed. Note :- Thickness after punning shall be considered for payment. |
| 172 | M & L for brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection including taking down old unserviceable bricks complete all as specified & directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
