Military Engineer Services-MES has published Repair To Joinery, Aluminium Doors / Ventilators, Steel Windows / Ventilators, Cup Boards, Rolling Shutters, Steel Doors, Pvc Doors, Wooden Doors And Windows Etc And Connected Work At Otm Accn At Cme. Submission Date for this Tender is 20-09-2021. Civil Work Tenders in Garrison Engineer (CME) Kirkee Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Sep-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-09-2021 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames, not exc. 1.50 sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed. |
| 2 | Taking down chowkats or frames, exc. 1.50 sqm but not exc. 4.00 sqm each with shutters (without taking off shutters from the frames), complete all as specified and as directed. |
| 3 | Taking down shutters only of size exc 1.00 Sqm but not exceeding 4.00 Sqm each all as specified and directed. |
| 4 | Taking down chowkats or frames, exc. 1.50 sqm each, with shutters (without taking off shutters from the frames), complete all as specified and as directed. |
| 5 | S&F 2nd class hard woodplain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put together with glue pinned at joints supplied and fixed all as specified and directed |
| 6 | M&L preparing surfaces of wood and wood based materials and treating ends of posts, back of chowkats. etc area exc 0.1 sqm but n.exc 0.5 sqm each of any description and girth not otherwise described and treated with tar or coal tar black paint complete all as specified and directed. |
| 7 | S&F factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed |
| 8 | S&F 30mm thickflush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 9 | S&F 2nd class hard wood 35 mm thick glazed and skeleton shuttersopen rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 10 | S&F Mild Steel works as in bands straps, hold fasts etc, conforming to FE 290 Gde E165, embedded portion duly painted with bituminious paint and sanded, complete all as specified and directed. |
| 11 | M&L for Preparing surface of iron and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each new or old of any description and girth otherwise described and treated with tar or coal tar black paint complete all as specified and directed. |
| 12 | M&L for Cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed. |
| 13 | S&F PVC Solid Door Frame of Size 50X47mm made out of 5.0mm Plain Colour PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructionscomplete all as specified and as directed. |
| 14 | S&F factory made solid panel pvc door shutter 30mm thick (stile) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall becovered with heat moulded plain colour pvc "c" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour pvc sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable pvc sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and as directed. |
| 15 | S&F factory made steel windows with two shutter (Glass & Wiremesh) with side hung shutters including projecting type hinges with steel handles,4mm glass, wiremesh grill and steel peg stay complete with glazing bars dovetailed or welded andpaintingwith two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer and including taking down old unservicable complete all as specified and directed .. |
| 16 | S&F in repair factory made steel ventilators top hung two shutters (Glass & Wiremesh) including projecting type hinges with steel handles,4mm glass, wiremesh,grill and steel peg stay complete with glazing bars andpainting over primer complete all as specified and directed .. |
| 17 | M&L for preparing new wood and wood based surfaces of any description, over 100mm width or girth and applying two coats of synthetic enamel paint (first quality) over a coat of pink primer, complete all as specified and as directed. |
| 18 | Dismantling wrought iron or mild steel work, viz. Mild steel flat iron, mild steel bars, bends, straps and similar work including mild steel bolts, nuts, etc., fixing to RCC fencing posts, struts, etc. Complete all as specified and as directed. |
| 19 | S & F for framed work such as grills or grating etc with ends of bars shouldered as framed guard bars conforming to Fe-290 Gde E- 165 all as specified and directed. |
| 20 | M&L for preparing oldwood and wood based surfaces of any description, over 100mm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and as directed. |
| 21 | M&L preparing new steel and iron surfaces of any descriptions, over 100mm in width or girth and applying one coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed. |
| 22 | M&L preparing old steel and iron surfaces of any descriptions, over 100mm in width or girth and applying one coat of synthetic enamel paint , complete all as specified and as directed. |
| 23 | S & F 100mm butt hinges extruded aluminium alloy with galvanised hinge pin anodised and fixed, type B-21 all as specified and as directed. |
| 24 | S & F MS butt hinges medium weight , cold rolled, 100mm ISI marked, complete all as specifiedand as directed. |
| 25 | M&L barrel tower bolts stove enamelled black of size 200 mm complete all as spd and as directed. |
| 26 | S & F 150mm Mild steel pressed handles, oval type,stove enamelled black all as specifiedand as directed. |
| 27 | S&F 150mm long Aluminium handles, cast type anodised all as specifiedand as directed. |
| 28 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specifiedand as directed. |
| 29 | S&F 300mm long aluminium alloy, anodised , sliding door bolt with hasp , staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 30 | S&F 300 mm Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specifiedand as directed. |
| 31 | S&F stainlesssteel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire staples, fixingetc, complete all as specified and as directed. |
| 32 | S&F in repair stainlesssteel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire staples, complete all as specified and as directed. |
| 33 | S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 34 | S&F in repair Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate . fixing in repair etc complete all as specified and directed. |
| 35 | S&F in repair 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 36 | S&F in repair Sheet Glass Tinted 5.0mm thick, Selected Quality, fixing to Aluminium Sections as in Panel of Doors, Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc., as required/ordered at Site(s), complete and all as specified and as directed. |
| 37 | S&F in repairs Mortise Lock of size 100mm, Brass Body, Vertical Type, 12 Lever and fixing to Aluminium Shutter with necessary fittings as required/ordered at sites(s) complete all as specified and as directed. |
| 38 | S&F in repair Double Action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium Alloy sheet foundation Box, Main Body with stainless steel cover, outer ring pivot made of brass, other part made Mild steel heavy duty and fixing to Aluminium Shutters with necessary fittings as required/ ordered at site(s), complete and all as specified and as directed. |
| 39 | S&F in repair door closer of aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-Charge. |
| 41 | S&F in repair 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-Charge. |
| 42 | S&F aluminum powder coated fixed partition with frame of size 101.6mm x 44.45mmx1.27mm thick and 101.60mmx44.45mmx1.20mm thick with total height 3.20m.The panels shall be made out of 5mm thick plain /tinted(frosted) glass in top & bottom of 12 mm thick both side laminated particle board(i.e 50-50) including door with accessories i.e floorspring,hydraulic door closer, butt hinges, handle tower bolt, necessary jointing cleats, glazing clips , rubber packing, powder coated aluminium snap beading screw etc including making good to the disturbed portion complete all as specified and directed. |
| 43 | S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour anodised door frame section 101.60x44.45x1.93 mm fixed as specified. (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as specified. (c) Aluminium colour anodised Top & stile shutter section 95.25x44.45x2.00 mm as specified. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002.Make-Jindal(f) Floor spring (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12 mm thick particle board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass(Colour) 5mm thick (k) Floor spring , Note : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge. |
| 44 | S & F for aluminium anodised three track sliding window with two or more shutter with 4 mm thick plane glass , one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of "JINDAL" or of equivalent make including taking down existing old window with frame of any description complete all as specified and directed. |
| 45 | S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old ventilator with frame of any description complete all as specified and directed. |
| 46 | S&F in repair 12mm thick Veneered decorateive plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work |
| 47 | M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs complete and all as specified and as directed. |
| 48 | M&L 6 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs complete and all as specified and as directed. |
| 49 | M&L for Sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and directed |
| 50 | Resecuring or easing & adjusting , without taking down of shutter in the same opening of any description and size complete all as specified and directed. |
| 51 | M&L 18/19mm thickPre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame including taking down existing board of any description complete all as specified and directed. |
| 52 | M&L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed. |
| 53 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 30mm complete all as specified and directed. |
| 54 | S&F in repair 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed. |
| 55 | S&F in repair 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw.complete all as specified and directed. |
| 56 | Dismantlingwall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed. |
| 57 | M & L for false ceiling with 4mm thick designer"E" board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size24mm x38mm x 0.7mm cross tee of size24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wireand making holes etc all as directedincluding two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and MakeE boardGypsum or equivalent approved . |
| 58 | Dismantling boarding , any description in any position with nails complete and all as specified and as directed. |
| 59 | M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 60 | S&F 1.25mm thick steel rolling shutters, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete push pull or manual type including locking arrangement(Safety lever locks mild steel with 4 levers for rolling shutters) , two coats of synthetic enamell paint over a coat of red oxide zinc chrome primer including taking down old rolling shutter of any description and size complete all as specified and directed. |
| 61 | Repairing to existingrolling shutter of any description and size by replacing ball bearing safety lever lock, replacement of PGI sheetand making fuctional by greasing etc complete all as specified and directed. |
| 62 | S&F steel door including projecting type hinges, steel handle, locking device including steel frame for door shutter with glazing bars, dovetailed or welded including dismantling old steel door of any description and size complete all as specified and directed . |
| 63 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing sheet of any descriptioncomplete all as specified and directed. |
| 64 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc including dismantling of existing sheet of any description complete all, as specified and directed. |
| 65 | M&L welding in repairs n. exc 2.5cm in length to old doors for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc complete all as specified and directed. |
| 66 | S&F fixed in repairs aluminium sheet 0.56 mm thick fixed to door shutters with nails all as specified and directed |
| 67 | S&F in repair 19/20 mm dia medium weight, aluminium powder coated of choice colouras in drapery rod/ curtain rod complete all as specified and as directed. |
| 68 | S & F in repair aluminium powdercoated brackets, decorative type of colour and design as approved suitable for curtain rods/drapery rod of 19/20mm dia complete and all as specified and directed. |
| 69 | S&F in repair for providing & fixing 12 mm thick gypsum board in ceiling including GI U-section 50mmx35mmx7mm & edge side GI U-section size 30mmx25mmx15mmx7mm fixed with screw gypsum board and frame grid suspended with soffit cleat to roof slab hanging 4 mm dia GI hanger rod with adjustable level clips, after fixing of gypsum board joints/junction of gypsum board ceiling to be covered with corner POP 50 mm strip complete all as specified and as per manufacture"s instruction and applying two coats of oil bound distemper over 2 mm thick POP to visible side of gypsum board ceiling shade/tint complete all as specified and directed by Engr-in-charge. |
| 70 | (Applicable for above allitems) |
| 71 | (a). Contractor has to employ skilled/unskilled tradesman with adequate experience & required documents to be submitted to office. |
| 72 | (b). Labour should wear contractors uniform with firm logo, failing which recovery shouldbe made. |
| 73 | (c). Minimum of 02 x teams of each trades shall be available for maint of urgent nature whenever called upon of any trade, failing which recovery will be initiated for not employing adequate labour at site. |
| 74 | (d) Site clearance shall be done by contractor after finishing work and obtain the signature of occupant as the site clearance has done. The same shall be verified and put up before issue of completion certificate |
| 75 | (e) All Scarps will be done with mechanical scaper |
| 76 | (f)Mechanical scaper should be deposit in our store at the time of sample approval |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
