}

Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa, NHPC Ltd. Tanakpur Power Station, Banbasa-Uttarakhand

National Hydroelectric Power Corporation Limited has published Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa. Submission Date for this Tender is 21-08-2021. Building Repair Tenders in NHPC Ltd. Tanakpur Power Station, Banbasa Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

28702760
Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa
Open Tender
Indian
Uttarakhand
NHPC Ltd. Tanakpur Power Station, Banbasa
21-08-2021

Tender Details

Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa Miscellaneous Repair And Renovation Work In Power House At Tanakpur Power Station, Banbassa

Key Value

Document Fees
INR 590 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Miscellaneous repair and renovation work in Power House at Tanakpur Power Station, Banbassa.
Sl. No. Item Description
1Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.
2Shifting of aluminium frame work (consisting float glass panes and prelaminated board)of size 4.80 Mts X 3.50 Mts. (Scope of work include carefully dismantling and refixing of aluminium frame work with required materials in complete)
3Providing and fixing decorative PVC wall paper. ( Thikness- 1.5 to 2.5 mm, printed pattern )
4Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm .
5Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete.1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size).
6Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron)
7Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Pre-laminated particle board with decorative laminationon both sides.
8Providing and fixing glazing in aluminium door, window, ventilator shutters.With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
9Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm .
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail