Military Engineer Services-MES has published Repair / Replacement Of Plaster , Roof Treatment, Gi, Ppgi Sheet And Sanitary Fittings And Certain B / R Work Of Technical And Residential Of Deal Under Ge ( I ) Rnd Dehradun Repair / Replacement Of Plaster , Roof Treatment, Gi, Ppgi Sheet And Sanit. Submission Date for this Tender is 23-08-2021. Shed Construction Tenders in DEHRADUN Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Aug-2021 | REVISED BOQ | BOQ | 16-08-2021 |
| 2 | 16-Aug-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-08-2021 |
| Sl. No. | Item Description |
| 1 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed . |
| 2 | M&L for non-skid colouredceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed |
| 3 | M&L for non-skid colouredceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed |
| 4 | M&L for non-skid colouredceramic tiles first quality (of approved class, colour and design/shade) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed |
| 5 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of size 350x250x7mm/450x350x7 mmthick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 6 | M&Lvitrifiedcoloured tiles 10 mm thick light shade(square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick cement screed bed in cement mortar 1:6 for laying floor finishes. complete all as specified and directed. |
| 7 | M&Lvitrifiedcoloured tiles 10 mm thick dark shade(square/rectangular) area of each tiles exceeding .18 sqm but not exceeding 0.38 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified & directed |
| 8 | M & L for repair to chajjas including necessary concreting in 1:2:4, plastering in CM 1:4 to disturbed portion and finishing the surface with two coats of cement base paint over a coat of primer incl preparation of surface complete all as specified and as directed. |
| 9 | Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed |
| 10 | M&L for75mm thick PCC(Cement concrete) 1:3:6 typeC-2 using 40mm gradedstone aggregate as in plinth protection finished even and fair and making 50mm deep joints at every 3 metre interval and at every corner and filling the jointswith bitumen of grade 85/25 and sand mixture 1:3 complete all as specified and directed. |
| 11 | M&L for cement concrete type B-1 (1:2:4) 20 mm graded aggregate in foundation, filling, PCC padding in sunken floors/ roofs (for slope correction)and mass concrete complete all as specified and directed. |
| 12 | M & L 15mm thick renderingin CM 1:3 on fair faces of brick/concrete surfaces (horizontal or vertical)mixed with WPC. (WPC will be measured & paid separately) . |
| 13 | M&L for 32 mm dia GI tubing of medium grade as drain out pipe of sunken floor. |
| 14 | M&L for cement concrete type E-2 (1:5:10) (using 40 mm graded brick coarse aggregate) in filling of sunken floors complete all as specified and directed. |
| 15 | M & L 75 mm thick for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in subbase for laying floor finishes complete all as specified and directed. |
| 16 | M&L 25mm thick cement concrete type B-0 (1:2:4) 12.5mm graded aggregate as in sub base for floors complete all as specified and directed. |
| 17 | M & L for sunken floor treatment as specified here-in-after, applying a priming coat of suitable primer over cleaned concrete surface, applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm, applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application and finally applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm over polymeric membrane complete all as specified and directed. |
| 18 | S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet,integral foot rest (excluding flushing cistern and flush pipe) & including CI trap & connecting fitting as required set inplain cement concrete (1:3:6) type C-1and connecting to flusing cistern and trap & connecting fittings as required and making good to floor, complete all as specified and directed. |
| 19 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap(excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. with and including plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging devicecomplete all as specified and directed. |
| 20 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mmincluding one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector,MS brackets 2 numbers including cutting for and pinning in ends of brackets completeall as specified and directed. |
| 21 | S&F in repair soap dishbrass, chromium plated, fancy type fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 22 | S&F in repair bibtapsbrass fancy type,brass,chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 23 | S&F in repair pillar taps, brass, with capston heads, fancytype chromium plated, screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 24 | S&F in repair fancy typeangular stopcock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 25 | S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions |
| 26 | Hacking out old broken glass of any size,thickness,size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones. |
| 27 | M&L for4mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane(work will be carried out for 2nd to 6th floor) complete all as specified and directed. |
| 28 | S&F 4mm thick figureed glass , pin headed type andglazing with oil putty in squaresof any description not exceeding .5 sqm in each pane (work will be carried out upto 4th floor) complete all as specified and directed. |
| 29 | Taking down shutters of aluminium of any description exc.1 sqm and not exc. 2 sqm each, resecuring and easing, adjusting and refixing in the same opening complete all as specified. |
| 30 | Taking down shutters of aluminium of any description exc. 2 sqm each, resecuring and easing, adjusting and refixing in the same opening complete all as specified. |
| 31 | S&F Powder Coated aluminiumdoor shutters, aluminiumsectionweighing 0.55kg/m includingnecessary jointing cleats/ glazing clips,rubber neoprene packing, handles 2 Nos in each door ,locking arrangment, aluminium snap beadingscrew etc, complete all as specified and directed.( minimum thickness of powder cated should be 50 micron) |
| 32 | S&F Powder Coated aluminiumwindow and ventilator shutters side hung type without sash bars, , aluminiumsectionweighing 0.55kg/m includingnecessary jointing cleats/ glazing clips,rubber neoprene packing, anodised aluminium snap beading , screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges typeB-21 100mm long ((2 Nos) suitable handle (1 No) complete all as specified and directed. |
| 33 | Dismantling aluminium orwooden partition work or asbestos cement sheet partition or boarding of any description , fixed in position with nails. Complete all as specified and directed. |
| 34 | S&F Powder Coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified. |
| 35 | Fixing only aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etccomplete all as specified. Note :- Old aluminium frame retrieved under item no 33 above shall be reused. |
| 36 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified. |
| 37 | Taking down existing double action floor spring hydraulically regulatedand Refixingonly after necessary repairs, oiling & greasing etc in proper position with and includingproper screw complete all as specified and directed. |
| 38 | S&F in repair aluminium (die cast) bodydoor closer hydraulically regulated, designation No.3 universal type, suitable for doors shutters up to 1000 mm in width and of weightbetween 61 to 80 Kg and fixed complete allas specified and directed. |
| 39 | Taking down existing door closer hydraulicially regulated andrefixing after necessary repairs,oiling & greasingetc in proper positionwith and including proper screw complete all as speified. |
| 40 | Taking down chowkhats with shutters (without taking off shutters from frame) not exc. 1.50 sqm each complete all as specified and directed. |
| 41 | Taking down chowkhats or frames with shutters (without taking off shutters from frame) exc. 1.50 sqm and n exc each complete all as specified and directed. |
| 42 | Taking down shutters of any description and make n. exc. 1 sqm each complete all as specified. |
| 43 | Taking down shutters of any description and makeexc. 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 44 | S & F with wood free EPS,Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing,etc complete all as spd and directed. |
| 45 | S&F factory madesolid PVC flush shutters 32 mm thick ,made from co extruded three layer rigid PVC Sheet ( Single Extruded ) with density not less than 600 Kg/ Cum, outer layer ( 0.80-1 mm ) thick should be of rigid PVC with density of not less than 1400 Kg/ CumSupplying and fixingin frame at site as per specifiecation& manufacture Instruction complete all as directed. |
| 46 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 47 | S&F for framed work such as grills, gratings, etc.. With ends of bars shouldered and riveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe. 290. Gde-E-165. Note (ii) :- Work will be carried out upto 6 story in necessary scafolding and safety measures and labour insourance etc complete. |
| 48 | Fixing only 4.8 mm thick or any thickness of sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed..Note :- Old glass retrieved under item no 14 above shall be reused |
| 49 | S&F in repairs mortice lock, vertical type of size 100 mmwith brass body 2 lever complete all as specified. |
| 50 | S&F in repair CP unirnal Push Cock incl necessary fittings all as specified and directed. |
| 51 | S&F in repair CP Urinal Spreaderincl necessary fittings all as specified and directed. |
| 52 | S&F in repair for 600x450mm beveled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply woodand fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 53 | S&F in repairchromium plated brass hand ablutionhealth fausetwith1.50 meter longflexible tubefancy type with necessary brass nuts & rubber washers cover withchromium plated springcomplete all as specified and directed. |
| 54 | S&F in repair100mm dia cast Iron floortrap, with CP gratingincluding jointing to waste pipe with solventcement and fixed in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 55 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic actiontype with inlet ball valve and float, handle with & including bracket andPVC flush pipe 32 mm borecomplete all as specified and directed |
| 56 | S&F PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed. |
| 57 | S&F in repairs PVC waste pipe flexible type 32mm dia suitable for coupling 32mm,610mm long for WHB/Sink complete all as specified. |
| 58 | S & F tubular towel rail 20mm dia 600mm long of brass chromimum plated complete all as specified and directed |
| 59 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed. |
| 60 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed. |
| 61 | S&F for laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing "medium grade" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed. |
| 62 | M&L for refixing old steel tubing and connections in new or old position(walls, ceiling, floors, etc.) for 20 mm dia pipes with and including all new fittings complete all as specified and directed. Note:- GI pipe shall be reused, received under Item No.80 here in above. |
| 63 | S&F for laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing "medium grade" with and including all GI fittings such asunions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floorscomplete all as specified and directed. |
| 64 | M&L for refixing old steel tubing and connections in new or old position(walls, ceiling, floors, etc.) for 15 mm dia pipes with and including all new fittings complete all as specified and directed. Note:- GI pipe shall be reused, received under Item No.81 here in above. |
| 65 | M&L for Cutting chases, pinningin making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm.complete all as specified and directed. |
| 66 | Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical verticalwith closed top) hoistedwith and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part Icomplete all as specified & directed. |
| 67 | Disconnecting & taking down existing water tank of capacity exc 500 liter and not exc. 1000 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical verticalwith closed top) hoistedwith and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part Icomplete all as specified & directed. |
| 68 | Dismantling of cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortar and taking out of trenches or floor or wall if required. |
| 69 | S&F in repair PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed. |
| 70 | S&F in repair PVC (SWR) bend 110mm dia , any radiusas required andjointed with approved adhesive complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid trenches or in floor complete all as specified and directed. |
| 72 | S&F in repair PVC (SWR) junction single (Single T) equal or un equal 110mm dia , any radiusas required andjointed with approved adhesive complete all as specified and directed. |
| 73 | Taking downcement or cement lime plaster of any description including racking out joints, hacking for keys , scrubing down with water etc, complete all as specified and directed. |
| 74 | M&Lfor Rendering 15 mm thick on fair faces of concrete /brick surface in cement mortar 1:6finished fair andeven as in wall complete all as specified and directed. |
| 75 | M&Lfor Rendering 10 mm thick on fair faces of concrete /brick surface in cement mortar 1:3finished even and smooth without using extra cementas inceiling and similar other workcomplete all as specified and directed. |
| 76 | M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:4mixed withwater proofing compound as per manufacturer"s instruction, finished fair and even without using extracement complete all as specified and directed. Note :- WPC shall be measured and paid forseprately as supply only under respective item of sch A. |
| 77 | M&L two coat of oil bound distemper of required tint on newly plastered surfaces of wall after prepration of surface and over a coat of3 mm thick wall care puttty complete all as specified and directed. |
| 78 | M&L three coat of white wash on newly plastered surfaces of ceiling includingprepration of surface complete all as specified and directed |
| 79 | M & L for preparation of newly plastered surfaceand applying two coat of cement base paint over a coat of suitable primer on walls complete all as specified. |
| 80 | M&L for Complete removal of existing treatment of old surface and washing rubbing down and stoping of distempered and painted surfaceof wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 81 | S&F in repair PVC water tank covers screw head type including four Nos of PVC nut and bolt in existing PVC water tanks of Cap 500 ltrs to 1000 ltrs cap with fixing arrangement complite all as specified and directed. |
| 82 | M&L for greasing and oiling in old rolling shutters (area exceeding 10.00 sqm of each shutter) of each parts i.e guide channels, cranks, springs, gearboxt and locking arrangement etc. with and including repairs as required for smooth functining of rolling shutter complite all as specified and directed. |
| 83 | M&L for greasing and oiling in old rolling shutters (area not exceeding 10.00 sqm of each shutter) of each parts i.e guide channels, cranks, springs, gearboxt and locking arrangement etc. with and including repairs as required for smooth functining of rolling shutter complite all as specified and directed. |
| 84 | M&L for greasing and oiling in old steel collapsible shutters (any size) of each parts with and including repairs as required for smooth functining of collapsible shutter complete all as specified and directed. |
| 85 | Taking down carefully unservicable ball bearing from rolling shutters and S&F ball bearing heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed. |
| 86 | Taking down carefully unservicable spring from rolling shutters and S&F new spring heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed. |
| 87 | Taking down carefully unservicable safty lever mild steel lock any type from rolling shutters and S&F newsafty lever mild steel lock 4 lever heavy duty as required size at approprite place, match the existing of gear operated type rolling shutter complite all as specified and directed. |
| 88 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 89 | M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed. |
| 90 | M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, copings, holdfast and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed. |
| 91 | M&L for post construction ATT along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc in apron complete |
| 92 | M & L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors |
| 93 | M&L post construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 litres/hole by driling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete |
| 94 | M&L for taking down/dismantling of existing roof treatment of any description such as PCC Padding/ Coba treatment/ mud phuska/Lime conc terracing including screed bed etc. Hessian base felt/tar feltetc. (any type and thickness)complete all as specified & directed. |
| 95 | Removal of demolishedmaterialsto a distance exceeding250 Mtr but not exceeding 500 Mtrand deposting where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed . |
| 96 | M&L for rendering 15 mm thick in cement mortar 1:4on roof surface including mixed with WPC as per manufacturer"s instruction"s and finishing the surfaces even and smooth without using extra cementcomplete all as specified and directed.Note :- WPC shall be measured and paid for separately as supply only under respectiveitem of sch "A". |
| 97 | M&L forcleaning of roof slab,parapets and beamsincluding picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane, complete all as specified and described as under :-(a)Preparation of surface and applyingonepriming coat of cold bituminous primer@ 0.30 kg / sqm.(b) Supply & providing APP modified polymeric water proofing. membrane 3 mm thick of weight not less than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) centre core including coating the surface with the compatible primer and torch application of membrane with minimum 10 cm overlaps in sides and 15 cmoverlaps in endas required thereof, complete all as specified and directed. (c) Applying one more coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over which one coat of aluminium bituminous paint @ 0.10 Kg/Sqm shall be applied.NOTE:- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer. |
| 98 | Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed. |
| 99 | S&F in repair venetian blind coloured powder coated 35mm wide and 1 mm thick Aluminium alloy blades with opening and closing arrangment including aluminium hanging channel at top with sliding wheel/ring including pulling rope in both side and necessary accessories complete all as specified and directed. |
| 100 | M&L for 3.20/3.30 thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fittinge complete all as specified and directed |
| 101 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness all as specified and as directed. |
| 102 | S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws asspecified and directed by Engr-in-Charge |
| 103 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 104 | M&L for removing the plants/ vegetation uptoSixstory height including penefreated roots complete and injecting chemical GLYPHOSPHATW 41% SL 20 ml or till refusal by makimg cut/ injection in the stem of plant 30mm C/C spraying with solution (25ml Glyphospoto 41% diluted with one litre water)including necessary scaffolding etcwk will be carried out upto 6 th storeycomplete all as per specification and directions of the Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
