Military Engineer Services-MES has published Repair / Replacement Of Arboriculture Pipe Lines And Maintenance Of Pump, Aerators, Panels And Cleaning Of Sumps And Allied Works In Army Area Jodhpur Repair / Replacement Of Arboriculture Pipe Lines And Maintenance Of Pump, Aerators,. Submission Date for this Tender is 14-09-2021. Pump repair and Maintenance Tenders in GARRISON ENGINEER ARMY UTILITY MULTAN LINE JODHPUR Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Aug-2021 | CORRIGENDUM1 | Date | 26-08-2021 |
| 2 | 18-Aug-2021 | CORRIGENDUM3 | Date | 31-08-2021 |
| 3 | 18-Aug-2021 | CORRIGENDUM2 | BOQ | 31-08-2021 |
| 4 | 31-Aug-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-09-2021 |
| 5 | 07-Sep-2021 | CORRIGENDUM4 | Date | 14-09-2021 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5m width and n,exc 1.5m in depth and getting out for laying of pipes etc in any type of soil, all as directed. Note : The contractor should be responsible for the rectifing the damages during the excavation i.e existing pipes, cables, culverts, building and road,path etc. |
| 2 | Returning filling in incl spreading levelling watering and well ramming in layers n.exc 25cm in any type of soil all as directed by Engineer-in-Charge. |
| 3 | Removing excavated material n.exc 50m and depositing where directed at a level n. Exc 1.5m above starting point all as directed Engineer-in-Charge. |
| 4 | Taking out unserviceable PVC/GI/HDPE pipe from the trench andremoving from the site. laying in trenches high density polyethylene pipes (HDPE) of specification PE-100 PN-10, DN-110 size 110mm outer dia conforming to IS 4984 of 1995 with all fittings and fixture such as tee, bend elbow if required to make the services functional complete all as directed by Engineer-in-Charge. Make : Finolex / Kisan/Supreme NOTE-All connected items like bend ,elbow,tee will be provided by contactor. |
| 5 | Taking out unserviceable PVC/GI/HDPE pipe from the existing location or new location,removing from the site. Suppley and laying in trenches high density polyethylene pipes (HDPE) of specification PN-10, of size 63mm outer dia conforming to IS 4984 of 1995 with all fittings and fixture such as tee, bend elbow if required to make the services functional complete all as directed by Engineer-in-Charge. Make : Finolex / Kisan/Supreme NOTE-All connected items like bend ,elbow,tee will be provided by contactor. |
| 6 | Taking out unserviceable PVC/GI/HDPE pipe from the existing location or new locationremoving from the sit. Suppley and laying in trenches high density polyethylene pipes (HDPE) of size 32mm outer dia conforming to IS 4984 of 1995 with all fittings and fixture such as tee, bend elbow if required to make the services functional complete all as directed by Engineer-in-Charge. Make : Finolex / Kisan/Supreme NOTE-All connected items like bend ,elbow,tee will be provided by contactor. |
| 7 | All as per ser item No 4 here-in-above but size of pipe 25mm. Make : Finolex / Kisan/Supreme NOTE-All connected items like bend ,elbow,tee will be provided by contactor. |
| 8 | All as per ser item No 4 here-in-above but size of pipe 20mm. Make : Finolex / Kisan/Supreme NOTE-All connected items like bend ,elbow,tee will be provided by contactor. |
| 9 | Taking out old unserviceable gate valve and supply and fixPPR gate valve as per IS-15801 and screwed both ends for HDPE / LDPE/PPR pipes and fixed the size of following bore :- Make : Kitec / SFMC / Reliance (a) 20 mm dia |
| 10 | (b) 25 mm dia |
| 11 | (c) 32 mm dia |
| 12 | M & L for arresting leakge of HDPE pipe by fixing additional GI nipple,HDPE pipe upto 1.5mtr ,socket,tee or bend as per site requirement like earth work, detachablejoint, rubber gasket,nut bolt as per site requiremt and as directed by Engineer-in-Charge for the following sizes :- (a) 100 mm |
| 13 | (b) 63 mm |
| 14 | M&L forinrepair/rectification of leakage in existingrising/deliveryDI Pipe Spigot/ socketed end including necessary earth work (i.e. excavation, removal & refilling,of trench), pumping out water from the ditch and rectifying the defects by taking out of existing broken rubber ring or pipe hole and the same by using necessary additionalrubber ring and iron Clamps as per site requirement etc including testing, commissioning of DI pipeline complete all as directed by Engineer-in-Charge for size 250mm bore. Note : Iron clamp, rubber ring & other arrangement for rectification of said defects is included in the cost of item. |
| 15 | Material and labour for clamp made of MS flat of size 80x6 mm with nuts & bolts forconnection from existing 50-250 mm bore CI/GI/DI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc all as directed by Engr-in-Charge at site. |
| 16 | Supply and Fixing for CI butterfly valve PN 16 manually operated, incl new rubber gasket, nuts and bolts etc and dismentling of existing unserviceable one of following sizes:- Make : Kirloskar / Zoloto / Sant (a) 50 mm bore |
| 17 | (b) 80 mm bore |
| 18 | (c) 100 mm bore |
| 19 | (d) 150 mm bore |
| 20 | Supply and Fixing for ductile Non Return valve incl new rubber gasket, nuts and bolts etc and dismantling of existing unserviceable one of size 150 mm. Make : Kirloskar / Zoloto / Sant |
| 21 | Taking up or down steel tubing alongwith fittings such as tee, bends etc and connections incl removal from site &Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including medium grade (ISI Marked) fittings laid in trenches jointed and tested complete all as specified and directed for the following bores of the following sizes:- (a) 20 mm bore |
| 22 | (b) 25 mm bore |
| 23 | (c) 50 mm bore |
| 24 | (d) 80 mm bore |
| 25 | Taking out old unserviceable gate valveand supply and fixgun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed for following sizes incl taking down and removal from site:- Make : Kirloskar / Zoloto / Sant (a) 20 mm dia |
| 26 | (b) 25 mm dia |
| 27 | (c) 32 mm dia |
| 28 | (d) 50 mm dia |
| 29 | Dismantling of stone masonry valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate stone massonary built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate inclframe made of angle iron of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of the following sizes:- (a) 1050 x 750 x 1050 mm |
| 30 | (b) 450 x 450 x 600 mm |
| 31 | Replacement of unserviceable CI foot valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of following size :- Make : Kirloskar / Zoloto / Sant (a) 50 mm bore |
| 32 | (b) 80 mm bore |
| 33 | Taking out unserviceable Air release valve from the existing location. S&F DI air release valve with two air outlets, 50mm dia bore and fixing up in any type ofwater supply mains of size 250/200/150 mm dia with complete fixing arrangement as specified and as directed by Engineer-in-Charge. Make : Kirloskar / Zoloto / Sant |
| 34 | Taking out unserviceable Water sprinkler from the existing location. S&F water sprinkler having metal body20mm sizefor Irrigation of plant complete all as directed by Engineer-in-Charge. Make : Aspee / Kisan / Rain Bird |
| 35 | Taking out unserviceable/burnout single phase preventer from existing location. S&F single phase preventer of Model Sz5SPPR of following range complete all as directed by Engineer-in-Charge :- Make : L & T / Havells / ABB (a) 7.5 Hp (9-14 Amp) |
| 36 | (b) 10 Hp (15-25 Amp) |
| 37 | (c) 12.5 Hp (20-32 Amp) |
| 38 | M & L for repair/maintenance ofsluice valveany type complete all way keep in no leakage condition including i.e. excavation,removal and refilling of trenches). Pumping out water from the ditch and rectify the defects by taking out existing spares ie rubber gasket / fibre sheet, nut & bolt etc and repacking of stuffing box, rejoining the same by using new one incl testing, commissioning of valve complete all as directed at site and complete all as directed by Engr-in-charge for following sizes :- (a) 200 mm |
| 39 | (b) 250 mm |
| 40 | Dewatering ,sweeping and taking out sludge in consolidated position from under ground treated water tankby using heavy duty sludge pumpupto depth not exceeding 15 mtr including cleaning of internal wall surface and floor throughly to make it free from dirt by scrubbing and washing accumulated materials with water, including cleaning of suction lines inside wet sump and removing from site etc complete all as directed by Engineer-in-Charge at site. Note : the contractor should be responsible for safety during the work i.e. hand gloves, mask,belt with rope etc and the Job should be done with in sepervision ofcontractor/ supervisor of the contractor. |
| 41 | Taking out old unserviceable centrifugal Monoblockpump with motor of any make any type from the treated water sump and Material and labour for cutting and taking out existing burnt out/unserviceable copper winding from the stator unit of centrifugal pump set of capacity 5/7.5 motor 440 V 3 phase(Make- Kirloskar/KSB) cleaning of slots and complete stator unit with using carbon tetra chloride (CTC) solution for replacement of suitable impeller, impeller wear ring,impeller shaft,bearings and gland packing set complete and re-installing in position & assemblingin the same after complete repair with accessories such as nut, bolts, washers,cleaning outer body,motor body painting etc.Installation with proper alignment including testing, commissioning complete to the entire satisfaction of Engr-in-charge. Note:The cost of transporting from site to work shop and back is deemed to be included in quoted rate. |
| 42 | All as perabove item No.24 but for submersible monoblock pump of capacity 10-20 HP. Note:The cost of transporting from site to work shop and back is deemed to be included in quoted rate. |
| 43 | All as perabove item No.24 but for submersible cutter sludge pump of capacity 10-12 HP. Note:The cost of transporting from site to work shop and back is deemed to be included in quoted rate. |
| 44 | Dismantling of unserviceable valves from different locations of arboriculture line and Supply, installation, connecting and testing sluice valve 250 mm Non rising, DI body Flanged (Long Body) Class PN-1.6 with flanged ends drilled suitable for the following bore of pipes, ISI marked (IS : 14846 : 2000), having brass spindle with iron wheel at top complete with nuts, bolts, washers, rubber gasket, etc all as specified and as directed by Engineer-in-Charge. Make : Kirloskar / Zoloto / Kejriwal |
| 45 | M & L for Earthing complete with galvanized steel earth plate electrodes 600mm x600mm x6mmthick buried directly in ground (earth pit not less 2.25 m deep below groundlevel) with top edge of the plate not less then 1.5 mtr below normal ground level connectedtogalvanized iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvnised iron or steelall as specified & shownin electrical plate No.5 of MES SSR part-I connected to earth test pointas specified and testing on completion including provision of 40 mm dia lightgradepipe & watering pipeshall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC for pit (1:3:6) type C-1 with RCC cover in PCC(1:2:4) including charcoal , salt funnel GI pipe 40 mm dia light gradeup to to 7.5 mtr length , complete all as directed by Engineer-in-Charge at site. |
| 46 | Material and labour for replace Earthing strip , galvanised iron strip30 x 6 mm , burried in groundor fixed to pole/ wall with saddles etc as specified and as directed by Engineer-in-Charge. Note :Earth work if required shall be measured and paid against relevant item of BOQ. |
| 47 | Taking out old unserviceable dripping pipe size of pipe 15/20mm dia and Supply and fixing of 15/20 mm dia HDPE dripping pipe confirming to IS with all fittings and fixtures such as bend,tee elbow if required to make the services functional complete all as directed by Engineer-in-Charge. Make : Kisan / Aspere |
| 48 | Taking out old rusted/ damaged nylon rope and supply and fixing nylon rope 16 mm dia with aerators boat for holding and taking out of aerators complete all as directed by Engr-in-charge. |
| 49 | Material and labour for spray painting to indoor type double door LT panels/Feeder pillar box incl angle iron stand by applying two coats of synthetic enamel paint over a coat of red oxide primer after cleaning the surface thouroughly with scrapper of MS sheet and angle iron stand incl cleaning of cables, wiring and other non painted parts complete all as directed by Engineer-in-Charge at site. |
| 50 | Taking out old unserviceable water proof light fittings of various colours with lamps and connected cable from aerators and Material and labour for replacement of suitable light fittings of various colours with lamp as per existing andfixing with proper alignment with aerator including testing, commissioning complete to the entire satisfaction of Engr-in-charge. Note: cable shall be measured and paid separately under relevant item of Schedule "A" ser item no 36. |
| 51 | Surface dressing not exceeding 15 cm deepcomplete by removing shrubs, branches of any kind , and cleaning all as directed by Engineer-in-Charge. |
| 52 | Taking out unserviceable non return valves from the pumping/distribution of raw/treated water line and removing from the site and Supply fixing and testing of Non return valve/reflux valve of 15 Kg/Cm2 body pressure and 10 kg/cm2 seat pressure suitable for 250 mm dia flanged type all as directed by Engineer-in-Charge. Make : Kirloskar / Zoloto / Kejriwal |
| 53 | M & L for taking down existing old unserviceable cable of any type & size and Supply & fix flexible flat PVC insulated PVC sheathed copper couductor stranded submersible cable,1100 volts grade 2.5 Sqmm 3.5 core including jointing material and connection work. Make : Polycab / Finolex / Havells |
| 54 | M & L for taking down old unserviceable TC / Main contactor, Star delta contactor including overload relay and timer switch of rating MNX Series up to 40 Amps,415 Volt. 4 pole,415Volt, including copper/alluminium cable, lugs of any size from Star delta startor complete all as directed by Engineer-in-Charge. |
| 55 | S & FMain contactor, Star delta contactor including overload relay and timer switch of rating MNX Series up to 40 Amps,415 Volt. 4 pole,415Volt, including copper/alluminium cable, lugs of any size from Star delta startor. complete all as directed by Engineer-in-Charge, including single phase preventer, operating relays to match the operational function of the contactor of the same all as directed and testing on completion of the work complete all as directed by Engineer-in-Charge for the following suitable capacity of :- Make : L & T / Schneider / Legrand (a) 5 HP motor |
| 56 | (b) 7.5 HP motor |
| 57 | (c) 10 HP motor |
| 58 | Supply and laying rubber insulating mat one side chequered size 2 mtr x 1 mtr x 2mm suitable for voltage upto 11kv, ISI marked. |
| 59 | Material and labour for cutting the road for laying of pipe and repair the same with road repair material (Patch mat) all as directed by Engineer-in-Charge as site width of road cutting would be 0.3 to 1.0 Meter. |
| 60 | Taking out old unserviceable / burn out DOL starter from various location. Supply, fixing and testing of DOL starter with single phase preventer in steel encloser type MN/ ML ( Motor rating AC -3 Duty, 415V, 50 hz, 3 Ph)of capacity 10 HP. Make : L&T / Schneider / ABB |
| 61 | M & L for taking down old unserviceable Isolator of rating 32 Amp to 100 Amps,415 Volt. ,3 & 4 pole,415Volt, 25 KA including alluminium cable lugs from existing LT panel of any size and all complete all as directed by Engineer-in-Charge. |
| 62 | Supply and fixing for MCB TPN, 4/3 pole,415Volt, including cable lugs of suitable size. complete testing, commissioning complete to the entire satisfaction of Engr-in-charge for the following capacity:- Make : L&T / Schneider / Legrand (a) 32 Amps |
| 63 | (b) 63Amps |
| 64 | (c)100 Amps |
| 65 | Material and labour for removal of all visible rust,mill scale,paint from existing 200-300mm sluice valves,Pumps & motorsany type of arboriculture pipe line. Prepare surface for painting work, apply first coat of modified alkyd resin primer and second coat of silicone-modified alkyd resin paint. Note:The cost of chemical, primer and paintis deemed to be included in quoted rate. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
