}

Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat. Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat., GE JORHAT-Assam

Military Engineer Services-MES has published Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat. Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat.. Submission Date for this Tender is 26-08-2021. Building Work Tenders in GE JORHAT Assam. Bidders can get complete Tender details and download the document.




Tender Notice

28701447
Corrigendum : Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat. Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat.
Open Tender
Indian
Assam
GE JORHAT
26-08-2021

Tender Details

Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat. Welcome Maint To Certain Md Officer Accn At Lichubari Under Ge Jorhat.

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 19-Aug-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 26-08-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 40000.0 /-
Tender Value
INR 20 Lakhs /-

BOQ Items

Name of Work: WELCOME MAINT TO CERTAIN MD OFFICER ACCN AT LICHUBARI UNDER GE JORHAT.
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.
2Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
3Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.
4Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
5Taking down chowkhats or frame with shutters (without taking off shutters from the frame) of area n. exc. 1.50 Sqm each and removing from site etc , complete all as specified and asdirected.
6Taking down chowkhats or frame with shutters (without taking off shutters from the frame) of area exc. 1.50 Sqm each but n.exc. 4.0 sqm and removing from site etc , complete all as specified and asdirected.
7Taking downshutters from frame or chowkat of any description of area n.exc. 1.00 Sqm each and removing from site etc , complete all as specified and asdirected.
8Taking downshutters from frame or chowkat of any description of area exc. 1.00 Sqm each but n.exc 2.0 sqm and removing from site etc , complete all as specified and asdirected.
9Dismantling PVC pipe of any descriptionetccomplete all as specified and asdirected.
10Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets,etc complete all as specified and as directed.
11Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing or removal from site of worketccomplete all as specified and asdirected.
12Taking up or down, steel tubing 20 mm bore, and connection including cleaning for re-fixing or removal from site of worketccomplete all as specified and asdirected.
13Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and as directed.
14Dismantling plain or corrugated steel sheeting, any gauge, any thickness, including Nainital or similar pattern roof coverings complete all as directed.
15Dismantling old and decayed timber scantlings, framed work, 40 sq. cm and over in section, in any position complete all as specified and directed.
16Supply and Fix, second-class hard wood timber scantlings, clean sawn, in unframed works and in any position, fixed with nails etc complete all as specified and as directed.
17Materials and Labour for Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622,in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.
18Materials and Labour for,Glazed Ceramic coloured tiles, 300 X 200 X 7mm thick, conforming to IS 15622, Grade B III, on vertical surface of wall such as dados,skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed.
19M&L for Vitrified ceramic tiles Light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.
20M&L for Vitrified ceramic tiles Light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in vertical tiles such as dado / skirtingetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.
21M&L for Granite (of any type) tiles 18-20mm thick machine cut, table rubbed and polished in steps , jambs , pillar , cooking platform and the like in cement sand mortar 1:4 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment 1:2to match the shade of granite stone including grinding and polishing complete, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed.
22Materials and Labour for, Pre-polished chemically treated chequered cement concrete tiles with grey cement and pigment,20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed.
23M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment complete all as specified and directed.
24M&L for clean and dry river sand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed.
25M&L forpost contructional antitermitefor treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified anddirected.
26M&L forproviding and injecting chemical emulsion for post contructional antitermite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres perlinear metreincluding drilling and plugging holes etc. in apron complete all as specified anddirected.
27M&L forproviding and injecting chemical emulsion for post contructional at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing complete all as specified anddirected.
28M&L for Brick work with sub class‘B’ bricks,straight or curved on plan exc 6m mean radius, built in cement sand mortar 1:6 etc complete all as specified and as directed.
29M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement sand mortar 1:4 etc complete all as specified and as directed.
30M & L forPCC 1:4:8 type D2 using 40 mm graded stone aggregateas in foundation , filling and mass or lean concrete etccomplete all as specified and as directed.
31M&L for75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base, finished even and smooth without using extra cement complete all as specified and as directed.
32M&L for50 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate) as in floor , finished even and smooth etc complete all as specified and as directed.
33M&L for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates as in plinth protection including finishing surface even and smooth without using extra cement , complete all as specified and as directed.
34M&L for 25 mm thick Providing precast cement concrete louvres and jallies, in cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate and set in cement sand mortar 1:4 including all moulding etccomplete all as specified and as directed.
35M&L for Rendering 15 mm thick, cement plaster, in cement sand mortar (1:6) onfair face of brickwork and finishing surface even and smooth without using extra cement, complete all as specified and directed.
36M&L for Rendering 5 mm thick, cement plaster, in cement sand mortar (1:3) onceilingand finishing surface even and smooth without using extra cement, complete all as specified and directed.
37M&L for Rendering 5 mm thick, cement plaster, in cement sand mortar (1:4) mixed with water proofing compound @ 3% by the weight of cement used or as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound shall be measured and paid separately)
38S & F 2nd class hardwood chowkats and frames Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete as specified and directed.
39S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete etc complete allas specified and as directed.
40S&F2nd classFactory made hardwood Glazed andskeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkat complete all as specified and directed
41S&F2nd classFactory made hardwood Glazed andskeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkat complete all as specified and directed
42S&F 18/19 mm thickMedium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) timber frame work as lining , panelling similar location cupboard shutter, shelf and kitchen cabinet etc complete all as specified & as directed
43S&F MS work as in flat iron 25 mm x 3 mm as in band , straps , holdfasts etc and similar works complete conforming to Fe-290 Gde-E-165etc complete all as specifiedand as directed.
44S&F Anodised aluminium frame powder coating (Minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
45S&FAnodised aluminium door shutters with powder coating of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazingclips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.
46S&F Anodised aluminium window and ventilator shutters, powder coating of any colour (Thickness or powder coating not less than 50 micron). fixed type / sliding typewithout sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified etc. complete all as specified and as directed.
47S&F aluminium anodised grill 10 mm thick including rubber packing etc complete all as specified and as directed. Make :Hindalco , section 7733or equivalent model of makes as approved by the GE.
48S&F in repairdouble action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed
49S&F in repairBrass mortice lock for aluminium door , vertical type, 4 Levers and 100mm size complete all as specified and directed
50S&Fsteel window with side hung shutters incl. projecting / box type hinges with steel handles steel peg stay , holdfast and guard bars etc complete with glazingbar 10 cm devetailed or welded including shop coat red oxide primer compete all as specified and as directed.
51S&Fsteel window with side hung shutters incl. projecting / box type hinges with steel handles steel peg stay and holdfast etc complete without glazingbardevetailed or welded including shop coat red oxide primer compete all as specified and as directed.
52S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etccomplete all as specified and directed.
53S&F Factory made solid panel wire gauge PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelamPVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling shall be of wire gauge .The wire gauge shall be wrapped on an additional square 8 mm MS soild tube . Wire gauge shall be stretched to tightened firmly,fixed in the frame at siteetccomplete all as specified and as directed.
54S&F 100 mm Butt hinges, stainless steel ,medium weight cold rolled mild steel complete all as specified and directed
55S&F 75 mm Butt hinges, stainless steel ,medium weight cold rolled mild steel complete all as specified and directed
56S&F 50 mm Butt hinges, stainless steel ,medium weight cold rolled mild steel complete all as specified and directed
57S&F Aluminium anodisedbarrel tower bolt, extruded type, 200 mm long, complete all as specified and directed.
58S&F Aluminium anodisedbarrel tower bolt, extruded type, 100 mm long, complete all as specified and directed.
59S&F Aluminium extruded handles, fabricated type, anodized, 150 mm size, complete all as specified and directed.
60S&F Aluminium extruded handles, fabricated type, anodized, 100 mm size, complete all as specified and directed.
61S&F Aluminium alloy, 300 mm long ,anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
62S&F Aluminium alloy, 150 mm long ,anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
63S&Fin repair300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
64S&F 40 mm wide flap when open, brass bright finish continuous (Piano) hinge complete all as specified and directed.
65S&F stainless steel magnetic hinges 19 mm long L type suitable for modular kitchen cabinet shutterscomplete all as specified and directed.
66S&Fstainless steel sliding channel175 mm suitable for modular kitchen cabinet shutterscomplete all as specified and directed.
67S&F 3 mm dia ISI marked stainless steel cup plate rack 4" x 17" x 20" suitable for modular kitchen cabinet shutterscomplete all as specified and directed.
68S&F 3 mm dia ISI marked stainless steel meals plate rack 6" x 17" x 20" suitable for modular kitchen cabinet shutterscomplete all as specified and directed.
69S&F 3 mm dia ISI marked stainless steel bottle basket 8" x 17" x 20" suitable for modular kitchen cabinet shutterscomplete all as specified and directed.
70S&F 3 mm dia ISI marked stainless steel catlery basket 4" x 17" x 20" suitable for modular kitchen cabinet shutterscomplete all as specified and directed.
71S&F 3 mm thick sheet glass and glazing with oil putty in squares not exceeding 0.50 sqm in each paneetccomplete all as specified and as directed.
72S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each paneetccomplete all as specified and as directed.
73S&F 5.5 mm thick sheet glass and glazing with oil putty in squares exceeding 0.50 sqm in each paneincluding hacking out old unserviceable one etccomplete all as specified and as directed.
74S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etccomplete all as specified and as directed.
75S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etccomplete all as specified and as directed.
76S&F 3 mm thick sheet glass and glazing with oil putty in squares notexceeding 0.50 sqm in each pane fixed with wooden beads or glazing clips with oil putty including hacking out old unserviceable one etccomplete all as specified and as directed.
77S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each panefixed with wooden beads or glazing clips with oil putty including hacking out old unserviceable one etccomplete all as specified and as directed.
78S&F in repair 100 mm Butt hinges, stainless steel ,medium weight cold rolled mild steel complete all as specified and directed
79S&F in repair 75 mm Butt hinges, stainless steel ,medium weight cold rolled mild steel complete all as specified and directed
80S&F in repair 50 mm Butt hinges, stainless steel ,medium weight cold rolled mild steel complete all as specified and directed
81S&F in repair Aluminium anodisedbarrel tower bolt, extruded type, 200 mm long, complete all as specified and directed.
82S&F in repair Aluminium anodisedbarrel tower bolt, extruded type, 100 mm long, complete all as specified and directed.
83S&F in repair Aluminium extruded handles, fabricated type, anodized, 150 mm size, complete all as specified and directed.
84S&F in repair Aluminium extruded handles, fabricated type, anodized, 100 mm size, complete all as specified and directed.
85S&F in repair Aluminium alloy, 300 mm long ,anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
86S&F in repair MS Aluminium anodised, tubular curtain rails 20 mm dia with aluminium brackets etccomplete all as specified and directed.
87S&F PVC (SWR)floor trap of 75 mm outlet plain with grating including jointing with solvent cementetc complete all as specified and as directed.
88S&F PVC (SWR) multi floor trap of 75 mm outlet plain with grating including jointing with solvent cementetc complete all as specified and as directed.
89S&F PVC (SWR) gully trap 125/110 mm including jointing with solvent cementetc complete all as specified and as directed.
90S&F PVC (SWR) pipes , 110 mm bore , single socketed in any length with rubber ring joints laid in trenches or on walls with necessary clamps etc complete all as specified and asdirected.Make:- Supreme / Prayag / Kanha / Prince
91S&F PVC (SWR) pipes , 75 mm bore , single socketed in any length with rubber ring joints laid in trenches or on walls with necessary clamps etc complete all as specified and asdirected.Make:- Supreme / Prayag / Kanha / Prince
92Supply and Fix, 110 mm bore PVC (SWR) bends any radius, with access door,complete all as specified and directed.
93Supply and Fix, 75 mm bore PVC (SWR) bends any radius, with access door,complete all as specified and directed.
94Supply and Fix, 110 mm bore PVC (SWR) branch pipe (single Y) equal or unequal ,complete all as specified and directed.
95Supply and Fix, 75 mm bore PVC (SWR) branch pipe (single Y) equal or unequal ,complete all as specified and directed.
96Supply and Fix, 110 mm bore PVC (SWR) Junction single (single T) equal or unequal ,complete all as specified and directed.
97Supply and Fix, 75 mm bore PVC (SWR) Junction single (single T) equal or unequal ,complete all as specified and directed.
98S & F Anodised aluminium snap grid frame work of size 605 mm x 605 mm( TEE Sec 24 x 38 x 0.70 mm , wall cleat 25 x 25 x 3.5 mm , ) with hanger 4 mm dia GI wire adjusting level fixed to roof truss by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fastener 12.5 mm dia , 40 mm long etc suitablefor false ceiling all as specified etc. complete all as specified and directed
99M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh
100S&F 4 mm thick standard non asbestos fibre cement ceilingboard ( testure finish )fixed or laid with snap grid etc. complete all as specified and directed
101Supply , laying and connection, GI water tubing , 15 mm bore , mediumgrade,including new GI fittings such as tee, bend, nipple, socket, reducer, flange, union etc complete all as specified and as directed by Engr in Charge.
102Supply , laying and connection, GI water tubing , 20 mm bore , mediumgrade,including new GI fittings such as tee, bend, nipple, socket, reducer, flange, union etc complete all as specified and as directed by Engr in Charge.
103Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as directed.
104Materials and Labour for waterproofing treatment to existing RCC roof in the following steps complete all as specified and directed. (i) Complete removal of the existing water proofing treatment. (ii)Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area)(iiii) Supply and Laying, chicken wire mesh of size 12.5 mm x 0.51 mm (24 SWG) hexagonal construction including all laps, cutting and waste in fabric reinforcement to PCC roof padding including providing 40 mm thick plain cement concrete (1:2:4) type B0using 12.5 mm graded aggregates as in roof padding.(iv) Providing 15 mm thick screed bed or bedding layer of cement mortar (1:3), mixed with liquid water proofing compound as per manufactures instructions, on concrete surface of roofs or terracing and finishing surface even and smooth without using extra cement.(iv) Waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 Kg /Sq M,, providing and laying APP polymer, modified, non-woven polyester fabric of 150 grams/square metre, reinforced membrane, 3.00 mm thick, weighing 3.00 Kg / Sq M, with surface finish of white mineral, by torch on application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms / Sq M complete all as specified and directed.
105S&F mild steel work as in tubular trusses , purlins, and posts etcincluding special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240etc complete all as specifiedand as directed.
106S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete allas specified and as directed.
107S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete allas specified and as directed.
108S&F in repair CP bib cock 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. Make:- Prayagcat part no. 8306 or equivalent make ofParryware / Hindware / Jaquar.
109Supply and Fix, in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,including taking down existing unserviceable one complete all as specified and directed.Make:- Prayagcat part no. 8702 or equivalent make ofParryware / Hindware / Jaquar.
110S&F in repair 15 mm bore chromium plated stop valve with crutch handle ,fancy type , screwed both ends for iron pipes etccomplete all as specified and directed.Make:- Prayagcat part no.8326 / 8328 or equivalent make of Parryware / Hindware / Jaquar.
111S&F in repair 15 mm bore chromium plated stop valve ( concealed type )with crutch handle ,fancy type , screwed both ends for iron pipes etccomplete all as specified and directed.Make:- Prayagcat part no.8318 /8320 or equivalent make of Parryware / Hindware / Jaquar.
112S&F in repair Gun-metal, globe or gate valves 15 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make:- BIR/ Prayag / Zoloto
113S&F in repair Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make:- BIR/ Prayag / Zoloto
114S&F in repair Chromium plated Shower rose 125 mm size with or without swivel joint of any sizeetc complete all as specified and as directed.Make:- Prayag cat part no. B0S-05 or equivalent make of Parryware / Hindware.
115S&F in repair health faucet with 1 meter tube and hook etc complete all as specified and as directed.Make:- Prayag cat part no. BEA-85 or equivalent make of Parryware / Hindware.
116S&F Soap dish, chromium plated ,fixed to wall with galvanised screwsetccomplete all as specified and as directed.Make:- Jaquar Cat part no .AQN-7331 or equivalent make in Prayag / Hindware / Parryware.
117S&F Chromium plated tubular towel rail 600mm long between the flanges and 20mm dia , D type etc complete all as specified and as directed.Make:- Prayag cat part no. BA-30 or equivalent make of Parryware / Hindware.
118S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.Make:-Prayag Cat No. BLM-01 or equivalent make in Hindware / Parryware.
119Supply and Fix, in repair sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make:- Prayag / Parryware / Hindware.
120Supply and Fix, in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make:- Prayag / Parryware / Hindware.
121Supply and Fix, sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unionto pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, with and including taking out unserviceable one complete all as specified and directed. Make:- Prayag Cat Part No 1239 D or n equivalent make inNirali / Hindware.
122Supply and Fix, Vitreous China wash down water closet pan (pedestal pattern), white , P or S Trap, (excluding fixing bolts, flushing cistern and flush pipe) but including fixing bolts nut and plastic water closet seat back including taking down old unservicable one etc complete all as specified and as directed.Make:- EWC Prayag Cat Part No 4016 , PVC Seat cover Prayag Cat Part No518 orequivalent make in Parryware / Hindware.
123S&F Vitreous china squatting pan ofOrissa Pattern of size 580x 440 mm ,whitewith ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooringcomplete all as specified and as directed .Make:- Prayagcat part no. 4054 or equivalent make ofPearl / Hindware.
124S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic dual action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length including 450 mm long PVC connection and making connections and good to disturbed surface with cement sand mortar 1:3complete all as directed by Engineer-in-Charge Make:- Prayag cat part no.502 or equivalent make in Parryware / Hindware.
125S&Fin repairVitreous china wash hand basin, white,ISI Marked, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia etccomplete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat part no. 4645 IRIS or equivalent make of Parryware / Hindware.
126S&Fin repairPlastic water closet seat, and cover white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging deviceetccomplete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat part no.518 or equivalent make of Parryware / Hindware.
127S&F in repair 32 mm dia waste coupling suitable for kitchen sink waste pipe etccomplete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat part no SA 03 or equivalent make inParryware / Hindware .
128S&F PVC connection pipe 15 mm size with PTMT nuts of length 450 mm longetccomplete all as specified and as directed by Engineer-in-Charge .Make:- Prayag / Parryware / Hindware.
129S&F in repair Rotational moulded polyethylene 500 ltrs capacity water storage tanks ,white or black colour,three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in positionincluding 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including 20 mm PTMT ball valve high pressure with polythene float and nut etc complete all as per SSR Part-I ,specified and as directed.Make:- Polycon / Polytuf / Sintex.
130S&F in repair Rotational moulded polyethylene 1000 ltrs capacity water storage tanks ,white or black colour,three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in positionincluding 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including 20 mm PTMT ball valve high pressure with polythene float and nut etc complete all as per SSR Part-I ,specified and as directed.Make:- Polycon / Polytuf / Sintex.
131S&F in repair 20 mm Ball valves ISI marked high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) etc complete all as specified and as directed.Make:- Prayag cat part No 152 or equivalent make inPolycon / Polytuf / Sintex.
132S&F in repair of 15 mm size Bib tap standard fancy type of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.Make:- Prayag cat part No 1231 or equivalent make in parryware / Hindware.
133S&F in repair 15 mm size Pillar tap fancy type of PTMT, any colour high pressure screwed for iron pipes (minimum weight 120 gram) complete all as specified and directed.Make:- Prayag cat part No 130-S or equivalent make in Parryware / Hindware.
134S&F in repair15 mm size Stop valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.Make:- Prayag cat part No 141 / 142 or equivalent make in Parryware / Hindware.
135Supply and Fix, brass CPfancy centre hole basinmixer for mixing hot & coldwater screwed down for iron pipe 15 mm bore and fixed, tube inlcuding taking out unserviceable existing one complete all as specified and directed. (Make:- Jaquar Cat Part No . QQT-7169B of Jaquar or equivalent make Kohler/Marc)
136Supply and Fix, brass CPfancywall mixer with L bends (including provision of over headshower & hand shower) for mixing hot & coldwater screwed down for iron pipe 15 mm bore and fixed, with including hand shower and tube inlcuding taking out unserviceable existing one complete all as specified and directed. (Make Jaquar Hand shower cat part no. HSH-CHR-1717 and Wall mixer cat part no. QQT-7281 or equivalent make in Kohler / Marc)
137M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood basedsurface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.
138M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood basedsurface n.exc.10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.
139M&L for applying two coats of synthetic enamel paint over a coat of red oxideprimer on new steelor iron surface exceeding 10 cm in width or girth including necessary preparation of surfaces complete all as specified and directed.
140M & L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with a coat tar or coal tar black paint complete all as specified and directed.
141M & L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of french polishing including cleaning and preparing the surfacescomplete all as specified and directed.
142M&L forpreparation of new or previously untreatedplastered or un -plastered surfaces of walls, etc and applying two coats acrylic distemper on walls, including one coat of suitable primerover and includinga coat of 1 mm thick white wall care putty complete all as specified and as directed.
143M&L forpreparation of new or previously untreatedplastered or un -plastered surfaces of ceiling , etc and applying two coats acrylic distemper on walls, including one coat of suitable primerover and includinga coat of 1 mm thick white wall care putty complete all as specified and as directed.
144M&L for preperation of new or previously untreated surfaces of wall and applying two coatsof 100 % Acrylic Exterior Emulsionpaint ( weather coat exterior grade ) over and including a coat of suitable wall primer including preparation of surfaces, complete all as specified and directed.
145M&L for preparation of old or previously treated surfaces of walland applying a coat of white wash complete all as specified and directed.
146M&L for preparation of old or previously treated surfaces of ceilingand applying a coat of white wash complete all as specified and directed.
147M&L for preparation of old or previously treated surfaces of wall including cornices , pilasters , by washing , rubbing down and stopping and applying a coat of Acrylic washable distemper complete all as specified and as directed.
148M&L for complete removal of existing treatment of surfaces of wall including cornices , pilasters , by washing , rubbing down and stopping and applying twocoats of Acrylic washable distemper over a coat of suitable primer over and including 1 mm thick wall care putty , chalk whitening etc complete all as specified and as directed.
149M&L for preparation of old or previously treated surfaces of Ceiling including cornices , pilasters , by washing , rubbing down and stopping and applying a coat of Acrylic washable distemper complete all as specified and as directed.
150M&L for preparation of old or previously treated surfaces of wall including cornices , pilasters , by washing , rubbing down and stopping and applying a coat of 100 % acrylic distemper exterior grade weather coatcomplete all as specified and as directed.
151M&L for preparation of old or previously treated surfaces of wood or wood based surfaces and applying one coat of synthetic enamel paint exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
152M&L for preparation of old or previously treated surfaces of steel or steel based surfaces and applying one coat of synthetic enamel paint exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
153Supply only integral water proofing compound ISI marked etc completeall as specified and as directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail