Military Engineer Services-MES has published Improvement Of Electric Supply Installations Building At Margao And Ponda Under Ge Panaji Goa Improvement Of Electric Supply Installations Building At Margao And Ponda Under Ge Panaji Goa. Submission Date for this Tender is 27-08-2021. Electrical Maintenance Tenders in GE PANAJI Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Aug-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-08-2021 |
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortor including all quions, arches pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles all as specified and as directed. |
| 2 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 3 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially porvided for chajja, roof beam, lintels, column etc complete all as specified and as directed |
| 4 | Rough finished flat form work to slabs supported on walls, beam, roof, deck slab and shelves, chajja,etc complete all as specified and as directed. |
| 5 | Material and Labour for cement concrete type D-2, (1:4:8) using 40mm graded stone aggregate in foundation filling and mass concreteetc complete all as specified and as directed. |
| 6 | Material and Labour for Cement concrete 1:3:6 (type C2) using 40 mm graded stone aggregate as in walls, pillars and posts etcincluding caps and basesetc complete all as specified and as directed. |
| 7 | Material and labour for reinforced cement concrete1:2:4 (type B-1) using 20mm graded stone aggregate as on slabs supported of walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc and similar work complete all as specified and as directed. |
| 8 | Material and labour for laterite stone walling of squared rubble, regular coursed well bounded, bedded and solidly hearted built in CM 1:6 complete all as specified and as directed. Note:- The rate considered is for laterite stone only as per section 6 stone masonry para 6.2.4 of SSR 2020 (Part-II) |
| 9 | Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints, as specified, ofsquared rubble masonry regular coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm complete all as specifed and as directed. |
| 10 | Taking down cement plaster any description on brick or stone surface including racking out joints hacking for key scrubbing down with water etc complete all as specifed and as directed. |
| 11 | Material and Labour for rendering 15mm thick in CM 1:6 on fair faces of brick/stone or concrete surfaces of wall finised even and smooth without using extra cement all as specifed and as directed. |
| 12 | Material and Labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick/stone or concrete surfaces with water proofing compound finishedsurface even and smooth with using extra cement slurry with 3.00kg/Sq.m Note :- Water proofing compound shall be measured & paid separately. |
| 13 | Material and Labour for 10 mm thick plastering in cement mortar 1:4 finished even and smooth without using extra cement on ceiling, soffit of chajja and roof projection or other similar worketc complete all as specified and as directed. |
| 14 | Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, Alkali & fungal resistant, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm to newly plastered wall surfaces complete all as specified and as directed. |
| 15 | Material and labour for preparation of new plastered wall surfaces and applying two or more coats distemperingwith 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of chalk whiting complete, as per manufacturer"s specification, complete all as specified and directed. |
| 16 | Material and labour for applying three coats of white wash including preparation of newly plastered or complete removal of existing treatment from ceiling surfaces complete all as specified and as directed. |
| 17 | Material and labour for applying three coats of white wash including preparation of newly plastered wall surfaces complete all as specified and as directed. |
| 18 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, Alkali & fungal resistant, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including complete removal of existing treatment old wall surfaces complete all as specified and as directed. |
| 19 | Material and labour for complete removal of existing treatment from old wall surfaces and applying two coats of distemperingwith 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over chalk whiting complete, as per manufacturer"s specification complete all as specified and as directed. |
| 20 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 21 | Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 22 | Dismantling asbestos cement (corrugated/semi corrugated etc) sheet including ridge in roof covering of any thickness complete all as specified and as directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 24 | Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality "A", Fe-290 (Gde E- 165) complete all as specified and as directed. |
| 25 | Supply and fix as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc compete, drilled for fixing of steel sheeting or other covering, or welding etc, prepared for hanging, or sliding with and including either hooks and hinges or steel hanging door fitting or other covering, or hanging, also fastening and fixing Fe 410-W (Gde-E-250) complete all as per specified and as directed. |
| 26 | Supplying and fixing reflectorised informatory sign baords both side made out of high intensity grade sheeting fixed over aluminium sheet 1.50mm thick, framed on 25mm x 25mm stainless steel square hollow section and fixed by 8mm round stainless steel bar to stainless steel tubes 40mm medium grade 1.20m long and embedded in the ground in concrete block of size 30cmx30cmx45cm with PCC 1:2:4 (type B1) using 20mm graded stone aggregate including necessary excavation etc, of size 1.20m x 0.90m complete all as specified and as directed. |
| 27 | Material and Labour for complete removal old paint on steel surfaces by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats, in any width or girth and applying two coats of synthetic enamel paint over one coat red-oxide primer above 10cm in width or girth, not otherwise described as specified and completed all as spd and directed by Engr-in-Charge. |
| 28 | Material and Labour for preparation new or old untreated steel surfaces of any description, over 10cm in width or girth, not otherwise describedand applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed. |
| 29 | Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 30 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads all as specified and as directed. |
| 32 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty of fixed with beads in square not exceeding 0.5 sqm each pane complete all as specified and as directed. |
| 33 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty of fixed with beads in square exceeding 0.5 sqm each pane complete all as specified and as directed. |
| 34 | Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) and disposing off the rubbish materials all as specified and as directed. |
| 35 | Material and Labour forNon skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exc 0.06sqm but n. exc 0.11Sqm in floors etc. set and jointed neat cement slurry and pointed white or coulored cement to matchincluding 15mm thick screed bed in CM 1:6 all as specified and as directed. |
| 36 | Material and Labour for Glazed ceramic coloured tiles in vertical surface such as skirting, dado and riser to step size 300x200x7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:4 complete all as specified and directed. |
| 37 | Dismantling / taking out existing hessain base felt or any other water proofing treatment from roof including cement plaster and exposing top surface of RCC slab all as specified and directed. |
| 38 | Material and Labourfor 40 mm thick cement concrete1:2:4 (type B0) using 12.5 mm stone aggregate and finishing cement concrete surface even and smooth without using extra complete all as specified and as directed. |
| 39 | Material and Labour for 15 mm thick rendering in cement mortar 1:3 with water proofing compound finishedsurface even and smooth with using extra cement slurry with 3.00kg/Sq.m Note :- Water proofing compound shall be measured & paid separately. |
| 40 | Material and labour for water proofing treatment using 4mm thick APP modified membrane consisting five layer membrane with features as specified weighing not less than 4kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4liters per sqm on surface to provide a layer of APP membrane by torching applications including sealing the overlap while torching with 150mm on length side and 100mm wide side as per manufacturer’s instructions including joints and change in directions be curved with cement mortar 1:3 mixed with SBR latex @ 200ml/bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1kg per sqmincluding taking down existing water proofing treatment, any type from top surface of roof slab and remove the material obtained to low lying area complete all as specified and as directed. |
| 41 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each all as specified and directed. |
| 42 | All as per Sl Item No. 41 here in before but exceeding 1.5 Sqm and not exceeding 4.00 Sqm each all as specified and directed. |
| 43 | Supply and fix 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 44 | Supply and fix 40mm thick, 2nd class hard wood plain, framed panelled shutters (any number panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium dedium density, wood partical board with commercial face veneers complete all as spd and directed |
| 45 | Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drawing & SSR Pt II 2010 sub section 8B complete all as specified and as directed. |
| 46 | Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVCChannel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drgs & SSR Pt II sub section 8B |
| 47 | Supply and Fix aluminium anodised barrel tower bolts 150mm long extruded section all as specified and as directed. |
| 48 | Supply and fix 125mm long aluminium alloy with galvanised mild steel butt hinges all as specified and as directed. |
| 49 | Suppyand fix aluminium anodised handle 150mm long extruded fabricated type all as specified and as directed. |
| 50 | Supply and fix of aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 250mm size all as specified and as directed. |
| 51 | Material and Labour for preparation of new or previously untreated, wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 52 | Material and Labour for preparation of old painted wood or wood based surface of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 53 | Material and Labour for 75 mm thick cement concrete1:3:6 (type C2)using 40 mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection or similar work etc. complete all as specified and as directed. |
| 54 | Material and Labour for cement concrete 1:2:4 (type B-1) using M-15 nominal mix using 20mm graded stone aggregate as in hardstanding or flooring complete all as specified and as directed. |
| 55 | Suply only Integral Water proofing compound complete all as specified and as directed. |
| 56 | Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including takingout embedded portion and making good disturbed ground all as specified and as directed. |
| 57 | Dismantling barbed wire fencing wire mesh complete all as specified and as directed. |
| 58 | Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surfaceall as specified and as directed. |
| 59 | Material and Labour for cement concrete 1:2:4 (type B1) using 20mm graded stone aggregate in copings, bed plates and kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throatingall as specified and as directed. |
| 60 | Supply and fixMS work as in fencing posts angle iron/Tee section, drilled and countersunk for bolusters running bars, including embedingin concrete and scuring etc, post and struts in fencing including cuting tops to shape as directed, drilled holes, notchingfor wire, etc, flatironfillets, (for securing wire mesh etc,) holding pr riveting etc, and similer work confirming to Fe-290 Gde E-165. Complete all as specified and as directed. |
| 61 | Material and labour for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 62 | Supply and fix MS screwd bolt (machine made) hexagonal/squre head sat one end and screwed the others, for screwd or both ends, each screwed and ends to be fitted with washers and one hexagonal/square nut, not exceeding 10 cm longall as specified and as directed. |
| 63 | Supply and fix galvanised stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbes at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line of wire to be measured seperately) |
| 64 | Supply only Chain link fencing of 10 gauge wire of 80x 80mm mesh sizeall as specified and as directed. |
| 65 | Fixing only chain link fencing including line wire, any mesh size and type to any type of standards, rails, straining bolts etc including provision of binding wire. |
| 66 | Taking down carefully copper/ aluminium point wiring of light, fan, socket 5/15Amps or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards/sunken box and making good the disturbed of wall/ceiling/floors etc so as to match with the existing surface complete all as specified and as directed. |
| 67 | Taking down carefully sub main wiring including copper/ aluminium/ GI earth continuity conductor and making good the disturbed surfaces complete all as specified and directed. |
| 68 | Taking down main/ sub main MCB DB with MCBs of any size and capacity along with teakwood boards and including all fittings/furniture carefully and making good the disturbed surfaces complete all as specified and directed. |
| 69 | Material and labour for point wiring for one light point controlled by one way switch complete with 1100Volts grade 1.50 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable(Make: Anchor/ Havells/ Plaza/ Finolex/ Polycab) fixed/ drawn through and including white/ ivory colour heavy duty PVC casing and capping ISI marked of suitable size with all accessories/ fittings (Make: Prestoplast/ Pressfit/ Finolex/ Precision) and fixing on wall/ ceiling with and including providing PVC board with cover (ISI marked)for mounting switches, sockets, regulators etc. withand including one run of 1100Volts grade, 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 70 | All as per item No.69 above but for one ceiling fan/exhaust fan point controllled by one switch |
| 71 | All as per item No.69 above but for one 5A 5 pin socket outlet point on same board with other switches including earth wire and connected to common earth and earth terminal all as specified and as directed. |
| 72 | All as per item No.69 above but for one 5A 5 pin socket outlet point on independent board withincluding earth wire and connected to common earth and earth terminals all as specified and as directed. |
| 73 | All as per item No.69 above but for one 15A 5 pin switch/socket out let point on independent board but cable of size 2.5 sqmm and earth cable of size 2.5 sqmm and connected to common earth and earth terminals all as specified and as directed. |
| 74 | Supply and fix switch flush type, single pole, one way, 5Amps, 240 Volts, white finish complete all as specified and as directed. Make : Anchor (Delux)/ Leader/ Bajaj |
| 75 | Supply and fix switch flush type 15Amps, 240 Volts, single pole white finish complete all as specified and directed.Make : Anchor (Delux)/ Leader/ Bajaj |
| 76 | Supply and fix socket outlet, 5 pin, 5Amps, flush type, white finish complete all as specified and as directed.Make : Anchor (Delux)/ Leader/ Bajaj |
| 77 | Supply and fix socket outlet, 2 in1, 3 pin, 5/15Amps, flush type universal, 240 Volt, white finish complete all as specified and as directed.Make : Anchor (Delux)/ Leader/ Bajaj |
| 78 | Supply and fix electronic socket size, rotary, 5 speed step type regulator, 220-230Volts, and white finish complete all as specified and as directed. Make : Crompton Greaves/ Bajaj/ Anchor |
| 79 | Supply and fix ceiling rose, surface bakelite of size 65mm x 20mm three terminals complete all as specified and as directed.Make : Anchor (Delux)/ Leader/ Bajaj/ L&T |
| 80 | Taking down old serviceable light fittings of any capacity and stacking at site carefully, re-fixing the same after completion of point wiring in same or other location as specified, connected with 3 core flexible cord of suitable gauge from ceiling rose to fitting and testing complete all as specified and as directed. |
| 81 | Material and labour for bracket made out of GI pipe 40 mm dia medium grade, 1.2metre long bent to shape fixed with MS flat iron clamps made out of 40mm x 6mm thick, nuts, bolts complete all as specified and as directed. |
| 82 | Taking down old serviceable building security lightfittings of any capacityup to 30 Wattsincluding bracket complete and stacking at site carefully, re-fixing the same fittings including providing3 core flexible cord of suitable gauge from ceiling rose to fitting and testing complete all as specified and as directed. |
| 83 | Supply and fix PVC insulated three core wire copper conductor 1100 Volt grade of size1Sqmm suitable to fan including removing the old one complete all as directed.Make : Lolycab, Havells, Plaza, Finolex |
| 84 | Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 4 Sqmm 2 core complete all as directed. Make : Lolycab, Havells, Plaza, Finolex |
| 85 | Supply and fix the following double door metallic sheet metal enclosurefor DB when MCBs to be used SPN 4 way 240 Volts with 100Amps rated bus bar complete fixed properly on/ in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and as directed. Make : Legrand/Havell"s/ Schneider/ L&T |
| 86 | All as per item No.85 above but for SPN 8 way |
| 87 | Supply and fix MCB SP 240volts, 6Amp to 32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed. Make: Havell"s/ Schneider/ L&T/Legrand |
| 88 | All as per item No.87 above but SPN 16 to 32 Amps. |
| 89 | Material and labour for sub main wiring with two single core PVC-FRLS insulated unsheathed stranded copper conductor cable of size 4Sqmm (Make: Havells/ Plaza/ Finolex/ Polycab) fixed/ drawn through and including heavy grade rigid PVC conduit 20mm or higher concealed in wall/ ceiling with accessories (Make: Prestoplast/ Pressfit/ Finolex/ Precision) with one single core PVC-FRLS insulated unsheathed stranded copper conductor cable of size 4Sqmm as a continuous earth wire complete all as specified and directed. Note: Two single core cables and one run of earth copper conductor/ rigid PVC conduit will be measured and paid as one unit length. |
| 90 | Material and labour for earthingcomplete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm diabar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
