}

Construction Of Main Building For Veternary Dispensary At Kurul, Tal.Mohol, Dist.Solapur , SOLAPUR-Maharashtra

Rural Development Department has published Construction Of Main Building For Veternary Dispensary At Kurul, Tal.Mohol, Dist.Solapur . Submission Date for this Tender is 04-08-2021. Building Work Tenders in SOLAPUR Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

28701158
Construction Of Main Building For Veternary Dispensary At Kurul, Tal.Mohol, Dist.Solapur
Open Tender
Indian
Maharashtra
SOLAPUR
04-08-2021

Tender Details

Construction Of Main Building For Veternary Dispensary At Kurul, Tal.Mohol, Dist.Solapur

Key Value

Document Fees
INR 1000 /-
EMD
INR 35700.0 /-
Tender Value
INR 35.68 Lakhs /-

BOQ Items

Name of Work: Construction of Main Building for Veternary Dispensary at Kurul,Tal.Mohol,Dist.Solapur
Sl. No. Item Description
1Excavation for foundation in earth, soil of all types, sand, graval andsoft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. ( LIFT UP TO 1.5 M.)SSR Item No.21.02Spec. No. Bd A1 P.No. 259
2Excavation for foundation in hard murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreding as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.( LIFT UP TO 1.5 M.)SSR Item No. 21.06, Spec. No. Bd A 2/ P.No. 259
3Excavation for foundation in Soft rock and old cement and lime masonry foundations including removing the excavated mate-rials upto a distance of 50 metres beyond the building area and stacking as directed including dewatering preparing the bed for the foundation and necessary back filling with available earth murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) SSR Item No.21.14, Spec. No.: Bd.A.4 Page No. 259
4Providing and castingin situ, cement concrete m-15 of trap/granite/quartzite/gneiss metalfor bed blocks, foundation block and such other items including bailing out water manually,formwork, compacting, roughening them ifspecial finish is to be providedand curing and finishing if requiredcomplete. without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand , SSR item No.24.08, Sp.No.Bd-E-4,P.No.289,B-7,P.No.38
5Providing and laying in situ, C C in M-10 of trap/granite/ quartzite/ gneiss metal forfoundation and bedding including bailing out water, formwork, compacting and curing . Comp.without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer ,with natural sand.SSR Item No. 24.01, Spec. No. Bd E.1P.No. 287
6Providing and laying in situ cement concrete M-20 of trap/granite/ quartzite for R C C work in foundation like raft,strip foundation,grillage and footings of R C C columns and steel stanchions including bailing out water, formwork ,compaction curing and roughening the surface if special finish is to be provided( Exculding reinforcement and structural steel) comp. without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand SSR Item No.25.11, Spec. Bd F3P.No. 298 & B-7,P.No.38
7Providing and casting in situ cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C.columns as per detailed drawings and designs, or as directed including , centering, formwork, compactionandroughening if special finish is to be providing and curing ( Excluding reinforcement ) complete. without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand SSR Item No.25.31,Spec. No. Bd F5P.No.300 & B-7,P.No.38
8Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C.beams and lintelsas per detaileddesigns and drawingor as directed including, centering, form work, compaction androugheningthe surface if special finish is to be provided and curing complete. (Excluding reinforcement) .without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sandSSR Item No.25.50,Sp.No.Bd-F-6,P.No.300 & B-7,P.No.38
9Providing and casting in situ cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. chajja including centering, formwork,compaction and roughening the surface if special finish is to be provided and curing complete.( Excluding reinforcement ). without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand SSRItem No.26.05 ,Spec. No. Bd F 9P.No. 303 & B-7,P.No.38
10Providing and casting in situ Cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C.Pardi 75 mm thick including centering, formwork,compaction and roughening the surface if special finish is to be provided and curing complete.( Excluding reinforcement ).without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sandSSR Item No.26.17, Spec. No. Bd F 11P.No. 304 & B-7,P.No.38
11Providing and casting in situ Cement Concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C.slabs and landings as per detailed designs and drawing or as directed including centering, formwork,compaction and roughening the surface if special finish is to be provided and curing complete. without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer with natural sand( Excluding reinforcement ). SSR Item No.25.70,Spec. No. Bd F8P.No. 302 & B-7,P.No.38
12Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Plinthincluding striking joints, racking out joints ,watering and scaffolding compete.SSRItem No.27.01,Spec. No. Bd G1P.No. 313
13Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:6 in Superstructureincluding striking joints, racking out joints ,watering and scaffolding compete.SSR Item No.27.05 ,Spec. No. Bd G5P.No. 315
14Providing Ilnd class Burnt Brick masonary with conventional type bricks in CM 1:4 in half brick thick wall including mild steel longidutinal reinforcement 2 bars of 6mm.hooks iron strips 25mm.1:6 at every third course properly bond at ends striking joints, racking out joints ,watering and scaffolding compete.SSR item No.27.06 Sp.No.BD.G.7 /P.No.316
15Providing and fixing in position TMT-FE-500 reinforcement of various diameters for R.C.C. pils caps,footings,foundations, slabs, beams, columns, canopies, staircase, neweis, chajjas , lintels, pardis, copings, fins, arches etc. as per detailed desings, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.SSR Item No.26.33 ,Spec. No. Bd F17 / 306
16Filling in the Plinth and Floors with Approved Excavated materials in 15cm to 20cm layers including watering and compaction complete. SSR Item No.21.36 , Spec. No. Bd A 10 P.No. 263
17Filling in the Plinth and Floors with Contractors soil,sand or Murum in 15cm to 20cm layers including watering and compaction complete. SSR Item No.21.37 , Spec. No. Bd A 11 P.No. 263
18Providing fine cement 1.5mm thick over green plaster surfaceincluding scafolding and curing etc. complete SSR Item No.32.21, sp..As directed by Engr.
19Providing cement plaster 12mm thickin single coat in CM1:5 without neeru finish to concrete or brick srfaces in all positions including scafolding and curing etc. Complete.SSR Item No.32.03, Spec. No. Bd L 2P.No. 368
20Providing sand faced plaster externally In cement mortar using approved screened sand in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete.SSR Item No.32.11, Sp.Bd-L-7,P.No.369
21Providingneeru finishto Plastered surfacesin all positions including scafolding and curing etc. complete. ( Excluding ceiling ) SSR Item No.32.15 Spec. No. Bd L 10 /370
22Providingand laying ceramic tiles of approved quality 30cm x 30cm x 8mm for Flooring in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including filling joints, with white/colour cement slurry,cleaningcuring complete.S.S.R.231/33.24,Sp.No.Bd-M-12/P.No.385
23Providingand laying ceramic tiles of approved quality 30cm x 30cm x 8mm for dado & Skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including filling joints, with white/colour cement slurry,cleaningcuring complete.S.S.R.Item No.33.25Sp.No.Bd-M-13/P.No.386
24Providing and layingvitrified mirror / glossy finish tiles ofsize 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickn and confirming IS 15622 - 2006 ( Group Bia ) of approved make,shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float ,filling joints with cement slurry curing and cleaning etc. complete.SSR item No.33.40,Flooring
25Providing and layingmirror / glossy finish tiles ofsize 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickn and confirming IS 15622 - 2006 ( Group Bia ) of approved make,shade and pattern for Skirting in required position laid on a bed of 1:4 cement mortar including neat cement float ,filling joints with cement slurry curing and cleaning etc. complete.SSR item No.33.41b)Skirting
26Providing and laying polished machine cut polished shahabad stone slab 20mm to 25mm for treads and risers of steps and staircases with rounded nosing for the treads on a bed 1:4 C.M.including cement float filling joints with neat cement slurry curing polishing and cleaning complete. SSR Item No.33.17 Sp.Bd-M-22,P.No.390
27Providing and fixing heavy duty inter locking concrete Rubber Mould Glossy paving block 60mm having a strength of 400 kg/Sq.cm. of approved auqlity and shape on a bed of crushed sand of 25 to 30 mm hick including skirting joints and cleaning etc. complete ( using 100 % crushed sand )SSR Item No.35.53 .Spec. No.: As directed by Engineer in-charge.
28Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. SSR Item No.33.68
29Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18x9x3 mm minimum size, crossings of M.S. flats of size 18x5 mm T and or E section for runner of minimum 40x6 mm size for fkunge, M.S. flat for top runner of minimum size 40x12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size6 mm max. spacings of vertical channels be 100 mmub closed gate position and clear space of 150 mm between two sets of crossings with holds fasts, stoppers, spaces,handles, locking arrangement and one coat of red lead primer etc. compete. ( I.S.10521-1983 ).S.S.R.ItemNo.39.26, Sp.No.Bd-T-57 P.No.511
30Providing and fixing black kadappa stone shelves 25 mm thick machine polished extending the polish upto 20 cm on lower side rounding corners laying in position jointing with cement morter bedding cement morter 1:4 curing etc.comp. SSR Item No.33.23 ,Sp.No.Bd.M.29/p.no.391
31Providing & fixing frame with / without ventilator of size as specified with non teak wood doors and windows including chamfering rounding rebating hold fast size 300 x 40 x 5 mm with oil painting etc.complete.SSR Item No.39.02Sp.As directed
32Providing and fixing solid core flush doorin single leaf 32 mm thick decorative type of exterior grade as per drawing approved face veneers 3 mm thick on both face without glazing and ventilator in the position shown on the drawing or as directed all necessry beads ,moulds,and liping,wrought ironhold fast iron oxidised fixtures and fastening and handles of both sides and finishing with french polishing etc. complete.SSR Item No.39.09 Sp.No.Bd-T-34 / P.No.499
33Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete.SSR Item No.39.48Sp .As Directed By Engr.in Charge
34Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box SSR Item No.39.44
35Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 kg/Sqm is considered. SSR Item No.39.55
36Providing and fixing mild steel grill work for windows 20 Kg / Sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting etc. complete.SSR Item No.40.01 ,Sp.Bd-U-1 /p.No.537
37Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete SSR Item No.35.23 As directed by Engineer in charge..
38Providing and applying two coats of exteriorweather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete SSR Item No.35.26As directed by Engineer in charge..
39Providing & fixing Orrisa type white glazed earthwnware 575mm. Water closet pan including "S" trap iron soil and vent pipe outside face of the wall 1:2:4 brick bat cement bedding withought flushing tank its all accessories etc.complete.SSR Item No.42.30, Sp.As Dire.by Engr,incharge
40Providing & fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm. Size including cold water pillar tap/cold and hot water piller tap brackets,rubber plugs and brass chain stop tap and necessary pipe connections including P.V.C.waste pipe and trap upto the outside face to the wall. SSR Item No.41.65 , Bd-V-30/565
41Providing and fixing 10cm.PVC Nahani Trap with grating etc. complete. SSR Item No.42.67 sp.no.As directed by engr.
42Provinding & fixing 15mm.Dia.screw down bib/stop tap of brass including necessory sockets union nuts etc. complete.SSR Item No.41.40,Sp.Bd-V-8/ 554
43Providing & fixing on walls/ceiling/floors, 15mm. Dia.CPVC pipe with necessary fitting,remaking good the demolished portion etc.complete.S.S.R item No 42.55, Sp.No.BDV-5/P.No.551& as directed by Engr.
44Providing & fixing on walls/ceiling/floors, 20mm. Dia.CPVC pipe with necessary fitting,remaking good the demolished portion etc.complete.S.S.R. Item No.42.56Sp.No.BDV-5/P.No.551& as directed by Engr.
45Providing & fixing 75 mm.dia Stabilizer pipe /pvc soil vent /waste pipe/and with necessary fixtures and fitting such as bend tees single junction slotted vent clampes etc.complete.SSR Item No.42.51Sp.As dire.by engr.
46Providing & fixing 100 mm.dia.stabilizer pipe /pvc soil vent /waste pipe/and with necessary fixtures and fitting such as bend tees single junction slotted vent clampes etc.complete.SSR Item No.42.52 , Sp.As dire.by engr.
47Providing soak pit of size 120x120x120 cm.including exacavating & filling with brick bats etc. S.S.R. Item No.42.19,Sp.No.Bd-V 46 / 576
48Provinding & fixing H.D.P.container Syntex or alike one piece moulded water tank made out of low density polyethyler & built corrugations inclusive of delivery up to designation housing fixing of accessories such as inlet outlet,overflow inclusive of all taxes Capacity between 1000 to 2000 lit. S.S.R. Item No.42.54as directed by Engr.
49Providing and laying 100 mm dia.salt glazed stone ware pipe including fitting such as bends tees single junctions double junction laying jointing (including excavation and reffiling the trenchs) complete. S.S.R.Item No.42.03,Spec.No.Bd-V.39 P.No.573
50Providing & fixing 450mm x 550 mm size superior type belgium mirror with 16 mm dia.Nicket plated rod etc.complete. SSR Item No.42.20 , Sp.No.As directed by Engr.Incharge
51Providing & fixing Chorium plated towel rod 16 mm dia.and 75 cm in length including all accessories complete.SSR Item No.42.31 Sp.No.As directed by Engr.Incharge
52Providing & laying in trenches 15mm. Dia.medium grade (type)having embossed as I.S.marks galvanised iron pipes weight of 1.25 kg./m.with screwed sockets,joints & necessory fittings remaking good the demolished portion with filling trenches & primer of anti-corrosive oil painttwo coats etc. complete.S.S.R.P.No.Item No.41.18Sp.No.BDV-5/P.No.551
53Provinding constructing Brick masonry Inspection Chember 60cm.x45cm.x90cm including 1:4:8 C.C.foundation 1:2:4 C.C.Channels half round G.S.W.pipes Brick masonry,plastering from inside and with the frame fixed in cement concrete etc. complete .with R.C.C.Cover.SSR Item No.42.12, Sp.No.Bd.V.43 /P.No.574
54Provinding and fixing 15 x 10 cm salt glazed stoneware gullytrap in cement concrete 1:4:8 outside of the bldg.including cast iron grating in the sink connected glazed stoneware pipe brick masonry chamber with cast iron lid and cast iron grating for the gully trap SSR P No.Item No.42.02sp .Bd-V- 38/P.No.572
55Providing, laying and fixing P.V.C. pipe of 110 mm. dia. With fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.SSR Item No.42.28
56Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised / iron screw / bolt and lead / bitumen washers as per drawing complete.(Weight of 5.5 kg/sq.m.)SSR Item No.38.04Sp.No.Bd.R.5,P.No.453
57Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.).SSR Item No.38.05,Sp.No.Bd.R.5,P.No.453
58Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. SSR Item No. 23.01,Spec. No.: Bd.C.2 Page No. 275
59Providing and laying Rough Shahabad Stone Flooring 25 milimetre to 30 milimetre thick and of required width in plain/diamond pattern on a bed of 1:6 cement mortar including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. SSR Item No. 33.01,Sp.No.Bd-M-1, P.No.379
60Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound.Marking finished surface with false squares of 300mm x 300 mm.making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete.SSR 220/31.04
61Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete item. SSR 44.11
62Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. Item No SSR 6.05
63Supplying hard murum/kankar at the quarry site including conveying & stacking complete.SSR Item No.2.29 Spec. MORTH-408
64Spreading hard murum for side width complet S.S.R.Item .No.2.30MORTH 408
65Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.SSR Item No.2.31
66Providing and fixingInformation sign board of size 1.20 m x 0.90 m. prepared on 18 gauge M.S. sheet with horizontal bracing of angle iron frame of size 25x25x5 mm including painting with one coat of zinc cromate primer and two coats of oil painting including two angle iron post of size 50x50x5 mm of 2.70 m. longincluding all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 45 cm x 45 cm x 45 cm size as directed by Engineer-in-charge etc. complete. As per RA
67AddFor Royalty Charges for Sand
68AddFor Royalty Charges for Other material
69Test of Concrete -Concrete mix Design ( with all test on basic material )
70Test of Bricks - Water Absorption (set of 5 Bricks ),Compressive strength,Efflorescence (set of 5 bricks )
71Test of Concrete -Compressive Strength of C.C.Cube (set of 3 cubes)
72Fine Aggregate - Fineness modulus ( Sieve Analysis )
73BasicTest of Cement
74Test of Steel upto 16 mm dia.-Tensile strength,%Elongation,Yield stress,weight per meter,Bend/Rebend test,Proof stress
75Add for GST Charges
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail