}

Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu-Nasd, Dandeli Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu Nasd, Dandeli.- 1.a Supplying of Voltmeter AC/DC 650v 72*72mm panel mount. Make: EIC or Equivalent a-Karnataka

Visvesvaraya Technological University-VTU has published Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu-Nasd, Dandeli Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu Nasd, Dandeli.- 1.a Supplying of Voltmeter AC/DC 650v 72*72mm panel mount. Make: EIC or Equivalent a. Submission Date for this Tender is 09-08-2021. Cutting Crimping and Punching Tools Tenders in Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

28676477
Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu-Nasd, Dandeli Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu Nasd, Dandeli.- 1.a Supplying of Voltmeter AC/DC 650v 72*72mm panel mount. Make: EIC or Equivalent a
Open Tender
Indian
Karnataka
09-08-2021

Tender Details

Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu-Nasd, Dandeli Supplying Of Tools And Equipments To Setting Up Electrical Lab At Vtu Nasd, Dandeli.- 1.a Supplying of Voltmeter AC/DC 650v 72*72mm panel mount. Make: EIC or Equivalent and as approved by the engineer-in-charge No 1 1.b Supplying of Voltmeter AC/DC 300v 72*72mm panel mount. Make: EIC or Equivalent and as approved by the engineer-in-charge No 1 2.a Supplying of Ammeter AC 32Amp 72*72mm panel mount. Make: EIC or Equivalent and as approved by the engineer-in-charge No 1 2.b Supplying of Ammeter AC 16Amp 72*72mm panel mount. Make: EIC or Equivalent and as approved by the engineer-in-charge No 1 3.a Supplying of Wattmeter single Phase UPF Table Top 1 KW. Make: EIC or Equivalent and as approved by the engineer-in-charge No 1 3.b Supplying of Wattmeter Three Phase UPF Table top 1 KW. Make: EIC or Equivalent and as approved by the engineer-in-charge No 1 4 Supplying of 50Hz panel mount Frequency meter. Make: As approved by the engineer-in-charge No 1 5 Supplying of 10 Amp Clamp meter Make: Meco Make: Meco or equivalent No 1 6 Supplying of 1 Mega OHM Earth tester. Make: Meco or equivalent No 1 7 Supplying of Phase sequency Meter. Make: Meco KM 981 MK - 1 equivalent No 1 8 Supplying of Power factor meter. Make: EIC or Equivalent and as approved by the engineer-in-charge No 1 9 Supplying of Megger. Make: Meco or Equivalent No 1 10.a Supplying of Power Diode 1N 5407 No 10 10.b Supplying of 2A Metal Diode No 10 10.c Supplying of Triac BTA 6 No 5 10.d Supplying of SCR 2P, 4M BT 151 No 5 Contractor 30 Registrar, VTU, Belagavi 11.a Supplying of various rating Resistor 1/2 Watt Carbon of 1 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 10 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 33 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 47 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 100 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 220 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 470 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 500 Ω; Supplying of various rating Resistor 1/2 Watt Carbon of 1 KΩ; Supplying of various rating Resistor 1/2 Watt Carbon of 10 KΩ; Supplying of various rating Resistor 1/2 Watt Carbon of 100 KΩ; Supplying of various rating Resistor 1/2 Watt Carbon of 1 MΩ. (Ten numbers of each rating) No 10 12.a Supplying of Wire wound Resistor, 5 watts 5Ω; Supplying of Wire wound Resistor, 5 watts 10Ω; Supplying of Wire wound Resistor, 5 watts 20Ω; Supplying of Wire wound Resistor, 5 watts 100Ω. (Ten numbers of each rating) No 10 13 Supplying of Rheostsat 100Ohm/2 Amps. Make: Standard or as approved by the Engineer-in-charge No 1 14.a Supplying of Thermistor NTC. Make: 30 Degree or as approved by Engineer-in-charge No 5 14.b Supplying of Thermistor PTC. Make: 30 Degree or as approved by Engineer-in-charge No 5 15 Supplying of Neon lamp suitable for 230 volts. Make: Standard No 10 16 Supplying of Transformer 5Amp Single Phase Primary I/P 230 V, Secondary O/P 50 V,100V,150V, 230 V No 1 18.a Supplying of multistrand copper wire FRLS PVC insulated 1100V grade, with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. Make: Anchor, Finolex, Havells, RR Kabel 1 sqmm Copper wire; 1.5 Sqmm multistrand copper wire; 2.5 Sqmm multistrand copper wire; 4.0 Sqmm multistrand copper wire; 6.0 Sqmm multistrand copper wire; 10.0 Sqmm multistrand copper wire (90 Mtrs coil each Sqmm) Mtrs 90 19.a Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975. Make: Havells/Polycab/Unistar 2 core 16 sqmm; 4 core 16 Mtrs 20 Contractor 31 Registrar, VTU, Belagavi sqmm; 3.5 core 25 sqmm (20 Mtrs coil each Sqmm) 20 Supplying of Service wire Aluminiun Mtrs 20 21 Supplying of 4 core 25 sqmm of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975. Make: Havells/Polycab/Unistar No 10 22 Supplying of Single strand, Copper, Aluminium wire No 20 23 Supplying of 50VA Potential Transformer 1:1 No 2 24 Supplying of Current Transformer 8 Amps No 2 25 Supplying of 2 wire Energy meter single Phase. Make: BHEL/L&T/Standard No 1 26 Supplying of 3 wire Energy Three Phase. Make: BHEL/L&T/Standard No 1 27.a Supplying of RELAY with following specifications Mechanical 2 pole, 24 VDC, 75 Ohms No 5 27.b Supplying of RELAY with following specifications Electronic 1 Amp. No 5 27.c Supplying of RELAY with following specifications Over load 3 Amp. No 5 27.d Supplying of RELAY with following specifications Current/Voltage No 2 28 Supplying of 2 ft x 3 ft LT Panel for Distribution work for load, Bus bar, choke, Star & Delta, motor 1 HP changer over with meter connection as per the SLD issued by the engineer-in-charge No 1 29 Construction of 3ft x 5 ft Panel Board, MCB, MCCB, Bus bar, load bifurcation, controlline, Energy meter and line frequency as per the SLD issued by the engineer-in-charge No 1 30.a Supplying of 2 pin socket, 5 A. Make: Anchor Roma/Legrand/GM or equivalent; Supplying of 3 pin socket, 5 A; Supplying of 5 pin socket, 5 A, 5 A; Supplying of 3 pin socket, 16 A; Supplying of Single pole switch, 5 A; Supplying of Two way switch, 5 A,; Supplying of Selector switch, 5 A. SPST; Supplying of Selector switch, 5 A SPDT; Supplying of Selector switch, 5 A; Supplying of Selector Switch, 5 A, Three way; Supplying of Selector Switch, 5 A, Three way Three way, with spring return; Supplying of Push button switch with lamp, 5 A.; Supplying of Pilot Lamp; Supplying of Push button switch with lamp maintened type, 5 A.; (Two numbers of each) Set 1 31 Supplying of Mains control, Ghoda, MCCB 32 Amps. Make: Standard ISO No 1 Contractor 32 Registrar, VTU, Belagavi 32.a Supplying of Control Devices such as 2 pole, 2 A, MCB; Supplying of Control Devices such as MCB, 3 pole; Supplying of Control Devices such as 4 pole, 2 A, MCB,; Supplying of Control Devices such as 16Amps MCCB, 32 A MCCB; Supplying of Control Devices such as 32 A MCCB. . Make: ABB/L&T/GM/Siemens No 2 33 Supplying of Auto change over Mains to Gen set 32 Amp. Make: Standard ISO No 1 34 Supplying of Operation for Star / Delta , Auto change Make: Standard ISO No 1 35 Connection of different types of motors, 1 Phase, 3 Phase with controllers in panel, including Slipring motor and control Custom built as per SLD issued by engineer-in-charge. No 1 36 Supplying of AC Drive for 1 HP motor. Make: PWM or as approved by Engineer-in-charge No 1 37 Supplying of DC Drive for 1 HP mptor. Make: PWM or as approved by Engineer-in-charge No 1 38 Supplying of VFD Drive for 1 HP mptor. Make: PWM or as approved by Engineer-in-charge No 1 39.a Supplying of Screw driver set. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.b Supplying of Normal screw driver. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.c Supplying of Insulated screw driver. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.d Supplying of Tester. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.e Supplying of Tong tester. Make: TAPARIA/equivalent No 1 39.f Supplying of Cutting Pliers normal. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.g Supplying of Cutting Plier Heavy. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.h Supplying of Wire cutter. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.i Supplying of Nose plier. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.j Supplying of Allen Key set. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.k Supplying of Hand drilling m/c. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 Contractor 33 Registrar, VTU, Belagavi 39.l Supplying of Lugs different types 1.5, 2.5, 4 Sq mm. Make: Ring , Pin, Snap On, Fork No 20 39.m Supplying of Soldering iron 25 watts. Make: Solderon or equivalent No 2 39.n Supplying of Wire benders. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.o Supplying of 1 1/2 inch Wrench. Make: TAPARIA or Equivalent and as approved by the engineer-in-charge No 1 39.p Supplying of Crimping tool suitable up to 6 sq.mm No 1 39.q Supplying of Ladder 6 ft Aluminium self supporting step ladder. Make: Bathla or equivalent. No 1 40 Supplying of Demo Panel, For domestic wiring, cable, switch, slab pipeing, conceil, Industrial 2 ft x 3 ft as per SLD issued by engineerin-charge No 1 41 Supplying of Earth pit materials, and other regular items, which are used for wiring materials Copper Strip, 2 inch GI pipe, Salt, Sand etc. No 1 42 PLC and HMI with software SPECIFICATION : 1) sematic S-300 CPU 314 -2PN/DP compact CPU with 192 KB work memory 24 DI /16 DO 4 AI , 2 AO PT 100 - 4 high speed counts , 60 KHz 1st interface MPI/DP 12 Mbit / S 2nd interface ETHEMET profinet 2-port switch 24 V DC front connector ( 2x 40) pole micro memory card required S- 7 micro memory 512 KV S-7 300 2) sematic step 7 professional V -15.1 software in TIA protal SW documentation on DVD USB flash drive configuration of S- 7 -1200 /1500 sematic 300/400 WIN/AC sematic basic panel 3)Sematic HMI TP - 700 comfort panel touch operation 7 inches white screen TFT display 4) Sematic WIN - CC runtime advanced 512 power tax V- 15.1 R- SW in TIA portal 5) sematic WIN - CC advanced v- 15.1 engineering software in TIA portal with other accessories (Manufacturers Authorization form needs to be enclosed) Make: Siemens or equivalent No 1 43 Supplying of working table with following dimensions 4 feet length X 2.5 feet height X 2.5 feet width and as per the directions of the engineer-in-charge No 6

Key Value

Document Fees
INR 520 /-
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail