}

Special Repair Of Link Roads Under Repair Programme Year 2021-22 Phase-4 In Mc Banga Distt. Sbs Nagar Nsr ( Sbsn ) 021-039 Group No.2 Time 8 Months , Executive Engineer(c), PMB, SBS Nagar-Punjab

Department Of Agriculture-DOA has published Special Repair Of Link Roads Under Repair Programme Year 2021-22 Phase-4 In Mc Banga Distt. Sbs Nagar Nsr ( Sbsn ) 021-039 Group No.2 Time 8 Months . Submission Date for this Tender is 12-08-2021. Road Work Tenders in Executive Engineer(c), PMB, SBS Nagar Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

28662541
Special Repair Of Link Roads Under Repair Programme Year 2021-22 Phase-4 In Mc Banga Distt. Sbs Nagar Nsr ( Sbsn ) 021-039 Group No.2 Time 8 Months
Open Tender
Indian
Punjab
Executive Engineer(c), PMB, SBS Nagar
12-08-2021

Tender Details

Special Repair Of Link Roads Under Repair Programme Year 2021-22 Phase-4 In Mc Banga Distt. Sbs Nagar Nsr ( Sbsn ) 021-039 Group No.2 Time 8 Months

Key Value

Document Fees
INR 10000 /-
EMD
INR 276000.0 /-
Tender Value
INR 1.37 Crore /-

BOQ Items

Name of Work: DNIT for Special Repair of Link RoadsUnder Repair Programme Year 2021-22 Phase-IV in MC Banga Distt. SBS Nagar NSR(SBSN)021-039 Group No.2 Time 8 Months
Sl. No. Item Description
1DNIT for Special Repair of Link RoadsUnder Repair Programme Year 2021-22 Phase-IV in MC Banga Distt. SBS Nagar NSR(SBSN)021-039 Group No.2Time 8 Months
2Making 50mm x 50mm furrows on existing road surface
3Dismantling stone pitching or soling (Stone pitching dry) CSR 8.2a
4Dismantling of existing brick on end edging complete in all respect as per PWD specifications.
5Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications.
6Relaying of recovered material obtained from dismantling of road crust as construction of Granular Sub-Base by providing coarse graded material grading-II sopreading in uniform layers with motor grader on prepared surface, mising by mix by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 o MORTH&H specifications
7Compacting Dismentled stone aggregates of Grading II to water bound macadam specification,rolling with smooth wheeled roller 8- 10 tonnes complete as per technical
8Water Bound Macadam Grading II (CSR 24.13 ii)Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, complete as per technical clause 404 of MORT&H specifications without screeening.
9Water Bound Macadam Grading III Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8- 10 tonnes in stages to proper grade and camber, applying and brooming Water Bound Macadam Grading II requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete a
10Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of MORT&H specifications
11Creditof materials (From Raising & Strengthening)Bricks
12Creditof materials (From Raising & Strengthening)Bricks Bats
13Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surfacetreated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications (CSR 24.18 b)
14Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a batch type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 511 of MORT&H specifications. Including carriage of mixed material plant to site of work
15Providing and laying of premix sand seal coat premixed in batch type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 513 of MORT&H specifications. Including carriage of mixed material plant to site of work.
16Earth workexcavation in ordinary soil,Kassi work undressed involvingan avarageHorizontal throw upto 2.00 meters and anavarage vertical lift upto 0.50 metreincincluding breaking of cloadsas .
17Cautionary sign board 600x600x600mm triangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet with 25x25x3mm angle iron frame supported on a mild steel angle iron post 65x65x6mm without cost of definition plate firmly fixed to ground in foundation concrete 1:2:4 of size 0.45x0.45x0.60m for vertical post complete as per technical clause 801 of MORT&H specifications (CSR 24.44 b)
18Place Identification sign board 900x600mm rectangular as per IRC 67-2012 with high intensity microprismatic grade retro reflective sheeting type XI as perASTM D 4956 - 09 and as per IRC 67-2012. fixed over 4mm thick aluminium composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy riverts @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a mild steel angle iron post 65x65x6mm without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications . A 10 years pre-qualification warranty as per clause 6.9 of IRC 67-2012 for Type XI retro reflective sheeting from the manufacturer & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted.as per CSR 24.47
19Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications as per CSR 24.57
20Videography of all the roadsincluded in DNIT to be done before the start of any work. Videography to be undertaken in the presence of an officer not below the rank of SDE / JE.Twovideo copies of each road to be submitted by contractor. It most cover all reaches and aspects of the road.
21Add 1% Culture Cess
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail