}

Special Repair Of 15 Nos Quarter Of Class-Iii Employees In Bdpo Block At Talwandi Sabo , TALWANDI SBAO-Punjab

Public Works Department-PWD has published Special Repair Of 15 Nos Quarter Of Class-Iii Employees In Bdpo Block At Talwandi Sabo . Submission Date for this Tender is 06-08-2021. Building Work Tenders in TALWANDI SBAO Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

28662487
Special Repair Of 15 Nos Quarter Of Class-Iii Employees In Bdpo Block At Talwandi Sabo
Open Tender
Indian
Punjab
TALWANDI SBAO
06-08-2021

Tender Details

Special Repair Of 15 Nos Quarter Of Class-Iii Employees In Bdpo Block At Talwandi Sabo

Key Value

Document Fees
INR 5000 /-
EMD
INR 29848.0 /-
Tender Value
INR 14.92 Lakhs /-

BOQ Items

Name of Work:DETAILED ESTIMATE FOR SPECIAL REPAIR OF 15 NO OF QUARTERS CLASS-3 AT BDO BLOCK, TALWANDI SABO
Sl. No. Item Description
1Dismantling Of Reinforced Cement Concretecomplete in all respects as per satisfaction of Engineer-In-Charge.
2Stripping and stacking slate or tiles of a roof complete in all respects as per satisfaction of Engineer-In-Charge.
3Dismantling of Brick Work Tile, Masonary Tile lining in cement mortar complete in all respects as per satisfaction of Engineer-In-Charge.
4Removing doors and windows together with the dismantling of wallscomplete in all respects as per satisfaction of Engineer-In-Charge.
5Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.complete in all respects as per satisfaction of Engineer-In-Charge.
6Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steelreinforcement centring and shuttering in superstructurecomplete in all respects as per specification.
7First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level complete in all respects as per specification.
8Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing complete in all respects as per specification.
9Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge.
10Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
11Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 complete in all respects as per specification.
12Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 complete in all respects as per specification.
13Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
14Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams complete in all respects as per specifications.
15Plastering on underside of ceiling 10mm thick cement plaster 1:4complete in all respects as per specifications.
1612.5 mm thick cement plaster 1:4 complete in all respects as per specifications.
1720 mm thick cement plaster 1:4 in two coat complete in all respects as per specifications.
18White Washingthree coats complete in all respects as per satisfaction of Engineer-In-Charge.
19Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete complete in all respects as per specifications.
20Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface complete in all respects as per satisfaction of Engineer-In-Charge.
21Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.complete in all respects as per specifications.
22Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. complete in all respects as per satisfaction of Engineer-In-Charge.
23Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint complete in all respects as per satisfaction of Engineer-In-Charge.
24Applying priming coat with metal primer on new steel or iron work including preparation of surface complete in all respects as per specifications.
25Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint complete in all respects as per satisfaction of Engineer-In-Charge.
26Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm complete in all respects as per specifications.
27Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position(Code : IS2202-1 (1999)
28Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area)
29Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flash welded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items
30Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.
31Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt)complete in all respects as per specifications.
32Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete in all respects as per specification.(250mm X 16 mm)
33Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position complete in all respects as per specification.
34Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in positioncomplete in all respects as per specification.
35Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.
36Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.
37Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.(Double layer tanks)
38Providing and fixing in position automatic brass Ball Cock in tanks. (Plastic Ball Cock with rod and PlasticBall(20 mm i/d) )
39Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.
40Providing and fixing jet spray with 2"-6" long PVC pipe.
41Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading complete in all respect and to the entire satisfaction of Engineer-in-charge.
42Coloured glazed tiles 20 cm x 20 cm and 5 mm thick in skirting and dado on 12 mm thick cement plaster 1:3 in baseand jointing with grey cement slurry @ 3.3kg per sqm and filling joints with white cement slurry in joints including bevelled corners complete in all respect and to the entire satisfaction of Engineer-in-charge.
43Credit of oldBricks
44Credit of oldBrick Bats
45Credit of old Scrapping of Steel
46Credit of Old windows
47Credit of oldDoors
48Credit of Ventilators
49Credit of Old Tiles
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail