Tender For Mechanical Works In Connection With Thorox Pumping Facility-Removing Of Cover Plates, Hoppers, Agitators Of 14 Cum Flat Bottom Slurring Tanks In Silo 6 Area And Refitting Back. Removing Of Cover Plates Of 14 Cum Wash Water Tank In Silo 6 -Kerala

Tender For Mechanical Works In Connection With Thorox Pumping Facility-Removing Of Cover Plates, Hoppers, Agitators Of 14 Cum Flat Bottom Slurring Tanks In Silo 6 Area And Refitting Back. Removing Of Cover Plates Of 14 Cum Wash Water Tank In Silo 6 Area And Refitting Back. Metal Repair Of The Tanks Agitators, Cover Plates, Feed Hopper, Working Platform, Ladders, Pipe Racks, Fabrication Of New Pipe Racks With Supports And All Metallic Structures Connected To Oxalate Pumping And Other Miscellaneous Works. Frp Lining Of Tanks And Other Required Area With Four Layers Of Chopped Strand Matting And One Layer Of Surface Mating In Bisphenol Resin Dismantling Damaged Valves And Fixing Of New Valves Or Fixing Valves In New Locations With Proper Supporting, New Gaskets And Bolts. Dismantling All The Flange Joints In Pumping Lines And Refitting With New Bolts And Gaskets, Providing Dummy Flanges For The Unwanted Lines. Removing Unwanted Lines And Dummying If Required. Hdpe Piping Work Using Pipes Of Sizes Mostly 63 Mm Od 90 Mm Od And Other Size Pipes If Any With Hdpe Fittings Like Bends, Ends, Tee, Flanges Etc. Fitting Of Agitator Gear Box And Pedestal In The Slurring Tank With Proper Sealing Removing Of Old Slurring Tank From Silo 6 Area. Paining Of Structural And Other Items Required As Per Eic Instruction. Primer And Paint Will Be Supplied By Irel Dismantling And Refitting Of Submersible Pit Pumps And Motors In Silo 6 Area As Per ?Clause 3? Of Details Of Work.. Dismantling And Refitting Of Horizontal Centrifugal Pump And Motor In Silo 6 Area As Per ?Clause 3? Of Details Of Work. Dismantling And Refitting Of Vertical Glandless Pump And Motor In Zilo 8 Area As Per ?Clause 3? Of Details Of Work. Cutting Of Grass And Shrubs In The Heppa Filter Area And Removing The Material To The Area Shown By Eic. Shifting Of 2Nos Of Exhaust Blower Motors From Heppa Filter Site To Electrical And Refitting The Motor Back At Site With Couplings And Proper Alignment Removing Of Sludge From The Tanks, Transferring To Jumbo Bags And Shifting To Location As Shown By Eic Laying Of Wooden Wipcheq Board

Refer document

Refer document

Refer document