}

Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar, GE I NAVY JAMNAGAR-Gujarat

Military Engineer Services-MES has published Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar. Submission Date for this Tender is 18-08-2021. Building Work Tenders in GE I NAVY JAMNAGAR Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

28619573
Corrigendum : Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar
Open Tender
Indian
Gujarat
GE I NAVY JAMNAGAR
18-08-2021

Tender Details

Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar Addition Alteration And Improvement To Quarters And Provn Of Kitchen Cabinet In Officers Md Accn Under Ge I Navy Jamnagar

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 04-Aug-2021 CORRIGENDUM TO TENDER DATE Date 18-08-2021
2 10-Aug-2021 CORRIGENDUM TO TENDER BOQ BOQ 18-08-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 48500.0 /-
Tender Value
INR 24.25 Lakhs /-

BOQ Items

Name of Work: ADDITION ALTERATION & IMPROVEMENT TO QUARTERS AND PROVN OF KITCHEN CABINET IN CERTAIN OFFICERS MD ACCNUNDER GE (I) NAVY JAMNAGAR
Sl. No. Item Description
1Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of entire debris as ordered outside MD land complete all as directed.
2Dismantling boarding , any description , fixed in any type and in positioncomplete all as directed.
3M&L pre-cast PCC 1:3:6 type C1 (using 20 mm graded granite aggregate) as in block masonry with factory made solid blocks,10 cm in width and setting in CM 1:6 complete all as specified.
4M&Lfor RCC M-30 using(using 20 mm graded granite stone aggregate) as in Kitchen platform , landing, canopies, Chajjas, deck slabs and in shelves and the like. Note: Reinforcement shall be measured and paid separately.
5Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished of concreteflat complete all as directed.
6S & F 10 mm dia and over TMTbarscut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
7M&L 20 mm thick granite slab (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin counter and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granitecomplete including slab laid over15 mm thick screed bed in cement mortar 1:4 complete all directed and specified.all as specified.(Note : Quoted rate is deemed tobe inclusive of cement screed)
8Renewing glazed colouredtiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing with newtiles of designas orderd complete all as directed.(Note : Quoted rate is deemed tobe inclusive of providing new tiles ).
9M&L for rendering 10 mm thick in CM 1:4 onblock masonry surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified.
10M&L preparing new plasrered surfaceof wall and applying two coats of oil bound distemper over acoatof coat of acrlyic primercomplete all as directed.
11S&F Providing Kitchen cabinet with shutter complete in required sizes made out of 18 mm thick PVC board white one side decorative and other side white balancing lamination fixed with screws and adhesive, screws of 5.5 mm. All the edges shall be covered with 2 mm thick PVC edge bonding tape of 90 degree edge bend finish as per make and specification complete all as specified and as directed.
12All same as per Sl No. 11 here-in-above, but both sides white lamination in CB shelves, partitions, sides etc.
13S&F stainless steel kitchen cabinet overlay/ L clip hinges comlete all as specified and as directed.
14S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws.
15S&F Stainless steel Magnetic catch all as specified and as directed.
16S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x4" complete all as described and as directed. Make: Arrow or equivalent make as approved by AO.
17S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x8" complete all as described and as directed. Make: Arrow or equivalent make as approved by AO.
18S&F stainless steel modern thali basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x6" complete all as described and as directed. Make: Arrow or equivalent make as approved by AO.
19S&F stainless steel modern cup saucer basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x4" complete all as described and as directed. Make: Arrow or equivalent make as approved by AO.
20S&F stainless steel modern perforated cutlarybasket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x4" complete all as described and as directed. Make: Arrow or equivalent make as approved by AO.
21S&F stainless steel modern thali basketmade up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x8" complete all as described and as directed. Make: Arrow or equivalent make as approved by AO.
22S&F 60 cm long stainless steel telescopic channels for sliding modular kitchen racks. Make: Arrow of equivalent make as approved by AO.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail