}

Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep, GE NAVY LAKSHADWEEP-Lakshadweep

Military Engineer Services-MES has published Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep. Submission Date for this Tender is 14-08-2021. Building Work Tenders in GE NAVY LAKSHADWEEP Lakshadweep. Bidders can get complete Tender details and download the document.




Tender Notice

28554149
Corrigendum : Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep
Open Tender
Indian
Lakshadweep
GE NAVY LAKSHADWEEP
14-08-2021

Tender Details

Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep Addition Alteration To P 05 Building Old Jr Sailors Block At Ins Dweeprakshak, Kavaratti Under Ge Navy Lakshadweep

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 30-Jul-2021 BOQ Corrigendum BOQ 07-08-2021
2 07-Aug-2021 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 14-08-2021
3 11-Aug-2021 CORRIGENDUM1 Other 14-08-2021

Key Value

Document Fees
INR 500 /-
EMD
INR 66000.0 /-
Tender Value
INR 33 Lakhs /-

BOQ Items

Name of Work:ADDITION ALTERATION TO P-05 BUILDING (OLD JR SAILORS BLOCK) AT INS DWEEPRAKSHAK, KAVARATTI UNDER GE (NAVY) LAKSHADWEEP
Sl. No. Item Description
1Dismantaling floor hearth or wall tiling including cement morter beddingand rubbish off the permises complete all as specified and as directed by Engineer in charge.
2Demolation of stone slabs and tiles laid bedded and pointed in any mortar of any description in floors, aprons etc. complete all as specified and as directed by Engineer in charge.
3Material and labour for Non skid Ceramic tiles 7 to 8mm thick (square/ractangular) area of each tile exc.0.11sqm but n.exc 0.18sqm (size 400x400mm), in floor etc. set and jointed neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in CM 1:6 complete all as specified andas directed by Engineer in charge.
4Material and labour for Glazed ceramic Desginer/ concepttiles coloured of size 300 x 450 x 7mm laid on vertical surface set and jointed in neat cement slurry and pointed in white and colour cement to match over 10mm thick cement plaster in CM 1:4, complete all as specified andas directed by Engineer in charge.
5Material and labour for machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer in charge.
6Material and labour for Kota stone slab, 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick screed plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing, polishing etc. complete all as specified and as directed by Engineer in charge.
7Material and labour for 75mm PCC 1:4:8 type D-2 as in sub base complete all as specified and as directed by Engineer in charge.
8Treating the surface of kota stone flooring with beeswax polish complete all as specified and as directed by Engineer in charge.
9Demolition of wall and ceiling boards, any thickness, including cover fillets complete all as specified and as directed by Engineer in charge.
10Supply and fix anodilsed aluminium snap grid(605x605mm) frame work for false ceililng complete all as specified and as directed by Engineer in charge.
11Supply and fix hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40x3mm size 60mm long and expension hold fasteners 12.5mm dia 40mm long complete all as specified and as directed by Engineer in charge.
12Supply and fix 12mm thick Gypsum Board (600x600mm) as in false ceiling fixed in aluminium frame work, including two coat of OBD complete all as specified and as directed by Engineer in charge. Note: Alumiium frame work to be measured and paid seperately under Sl item Nos. 10 & 11 here-in-before.
13Taking down rain water pipe (any size or any pattern) including all fitting , heads, shoes, bends etc. complete all as specified and as directed by Engineer in charge.
14Supply and fix 110mm bore PVC(SWR) rain water pipe single socketin length with rubber ring joionts fixed to wall complete all as specified and as directed by Engineer in charge.
15Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer in charge.
16Supply and fix UPVC pipe (SCH-40) 150mm dia bore as circular or semi circular shape including all fittings as in rain water gutter/ GI bracket of size 25x 4 mm @ 600 mm center to center, including corner pieces complete all as specified and as directed by Engineer in charge.
17Supply and fix rotational moulded polyethylene water storage tank 5000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engineer in charge.
18Taking down Chowkhats or frames with shutter(withouttaking off shutters from the frame) not exc. 1.5 Sqm each and removin from site complete all as specified and as directed by Engineer in charge.
19Taking down Chowkhats or frames with shutter(withouttaking off shutters from the frame but exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed by Engineer in charge.
20Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and as directed by Engineer in charge.
21Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforcedd with MS square tube fixing in existing opening including necessary hold fast/screwing complete all as specified and as directed by Engineer in charge.
22Supply and fix in frame factory made solid PVC moulded door shutter, 28 to 30mm thick(stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front faced and 2mm plain colour PVC sheet on back face complete all as specified and as directed by Engineer in charge.
23Supply and fix powder coated aluminium frame/Shutter for door, windows (sliding type) ventilators and railing etc. with one or more rebates including joining cleat for fixing etc. fixed type/ louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, PVC gasketing all around the shutters and the frames, anodiesed aluminium snap beading, screws etc. complete all as specified and as directed by Engineer in charge.
24Supply and fix powder coated (Minimum thickness of powder coating shall be 50 micron) aluminium Grill fixed with powder coated "F" or "H" sections of suitable size as per manufacturers instructions, fabricated and rivetted to aluminium windows complete all as specified and as directed by Engineer in charge. Note: Actual weight of aluminium grill and"F" or "H" sections used shall be mesured and paid under this item.
25Material and labour for 20mm thick polished Granite (of any type) work as a window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust wilth admixture of pigment to match shade of granite complete all as specified and as directed by Engineer in charge.
26Supply and fix 4 mm thick sheet glass, ordinary quality, with glazing with clips and rubber beading, size of each pane exceeding 0.5 Sqm complete all as specified and as directed by Engineer in charge.
27Supply and fix Aluminium alloy wire cloth 0.45 mm nominal dia or wire and average with of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer in charge.
28Supply and fix 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer in charge.
29Supply and fix 125mm long extruded brass handle ,cast type , polished bright complete all as specified and as directed by Engineer in charge.
30Supply and fix 100mm long Butt hinges, cast brass with mild steel hinge pin, bright polished complete all as specified and as directed by Engineer in charge.
31Supply and fix Aluminium alloy, anodised sliding door bolt 250mm long with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engineer in charge.
32Supply and fix 20mm dia curtain rod, mild steel chromium plated incl fixing brackets (fancy decorative type), stops, rollers etc complete all as specified and as directed by Engineer in charge.
33Supply and fix brass Hat and coat hooks solid body,size 175mm to 250mm complete all as specified and as directed by Engineer in charge.
34Supply and fix bevelled edge mirror of 5.5mm thick, selected quality glass moulded on 6mm thick AC building board or commercial plywood, fancy type, fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer in charge.
35Supply and fix 20 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugshose clips etc and fixingcutting through walls, floors and their making good or layilng in trenches and also cutting, screwing and wastge, Including taking down old pipe complete all as specified and as directed by Engineer in charge.
36Supply and fix 25 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugshose clips etc and fixingcutting through walls, floors and their making good or layilng in trenches and also cutting, screwing and wastge, Including taking down old pipe complete all as specified and as directed by Engineer in charge.
37Supply and fix PVC valveless, syphonic action type flushing cistern, low level white with inlet ball valve float and handle including bracketsin 10 litres capacity complete all as specified and as directed by Engineer in charge.
38Supply and fix vitreous china wash basin white flat back size 630x450mm, excluding taps, but including brackets including cutting for and pinning in ends of brackets or erecting stand but excluding fixing of supply and waste pipe complete all as specified and as directed by Engineer in charge.
39Supply and fix vitreous china wash down water closet pan (Pedestal pattern) with S / P trap white including connection to drain and flushing pipe antisyphonage pipe etc complete all as specified and as directed by Engineer in charge.
40Supply and fix in repair vitreous china, squatting from Pan "Orissa" pattern "white" size 580mm x 440mm white with integral footrest including provisionof lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc including making good to floor where required complete all as specified and as directed by Engineer in charge.
41Supply and fix in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer in charge.
42Supply and fix in repair Brass chromium plated Tubular towel rail 20mm dia D type, 60mm long between flanges complete all as specified and as directed by Engineer in charge.
43Supply and fix in repairs for 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer in charge.
44Supply and fix Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed for 15 mm dia bore of pipe complete all as specified and as directed by Engineer in charge.
45Supply and fix chromium plated health faucet with all accessories including chromium plated 1 Mtr long flexible connection pipe complete all as specified and as directed by Engineer in charge.
46Supply and fix chromium plated two way Angle cock with all accessories complete all as specified and as directed by Engineer in charge.
47Supply and fix Bip Taps, fancy type, Chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore of pipe complete all as specified and as directed by Engineer in charge.
48Supply and fix PVC connections 15mm size with PTMT nuts of length 750mm complete all as specified and as directed by Engineer in charge.
49Supply anf fix grating 100mm dia of PTMT Minimum weight 25 grams complete all as specified and as directed by Engineer in charge.
50Material and labour for Rendering in cement mortar (1:4) 15mm thick , with water proofing componud on fair face of brick work (External surface) and finised even and smooth without using extra cement including taking down old plaster complete all as specified and as directed by Engineer in charge.
51Material and labour for Rendering in cement mortar (1:6) 10mm thick on fair face of brick work (Internall surface)and finised even and smooth without using extra cement including taking down old plaster complete all as specified and as directed by Engineer in charge.
52Material and labour for preparation of new plaster surface of wall (internal) and applying two coats of distemper oil emulsion white or tinted over one coat of alkali resistant primer on plaster surfaces of wall complete all as specified and as directed by Engineer in charge.
53Material and labour for complete removal old decorated painted surface of wall including washing rubbingand apllying two coat oil bond distumper over a coat of alkali primer over 1 mm thick wall care putty complete all as specified and as directed by Engineer in charge.
54Material and labour for preperation of new wall surfaces and applying exterior emulsion weather proof paint (Apex Ultima or equivalent) of any colour, two coats, over a coat primer and a coat of cement based exterior putty not less than 1mm thick, on wall/column projection, chajja sides and bottom etc complete all as specified and as directed by Engineer in charge.
55Material and labour for Complete removal of existing treatment and washing ,rubbing down and stopping of old colour washed/distempered wall /chajja surfaces including brooming down or steel wire brushing and scrapping down smoke soot,mould moss , efflorescent salts ,trading oil and greasy spots including washing with water andapplying two coats of exterior emulsion weather proof paintover a coat of 1mm thick cement based exterior wall putty and over a coat of exterior wall primer on walls, column projection, chajjacomplete all as specified and as directed by Engineer in charge.
56Material and labour for cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate as top/wearing layer of floors 100 mm thick & pavings finished even and smooth without using extra cement and spike rolling to surface complete all as specified and as directed by Engineer in charge.
57Material and labour for providing brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in CM (1:4) complete all as specified and as directed by Engineer in charge.
58Material and labour for Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engineer in charge.
59Material and labour for Reinforced cement concrete ( nominal mix ) Type B0 1:2:4 (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer in charge.
60Supply and fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer in charge.
61Material and labour for 2nd class hard wood exc 3 and not exc 6 sqm plain fillets square rectengular or tringular in section clean swan secured with nails or brads complete all as specified and as directed by Engineer in charge.
62Material and labour for 2nd class hard wood exc 13 and not exc 25 sqm plain fillets square rectengular or tringular in section clean swan secured with nails or brads for cupboard frame complete all as specified and as directed by Engineer in charge.
63Material and labour for 12 mm thickveneered decorative plywood grade 1(with BWR resin) with decorative face veneers on only one face fixed with screws to timber frame work complete all as specified and as directed by Engineer in charge.
64Material and labour for providing external teak wood lipping, 6mm thick, fixed with nails to 12 mm thick plywood complete all as specified and as directed by Engineer in charge. Note: 12 mm thick plywood measured and paid under Sl item No. 63 here-in-before
65Supply and fix 150mm hasp and staple, Aluminium anodised, wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and as directed by Engineer in charge.
66Supply and fix continuous brass piano hinges with bright finish or electro galvanised width of flaps (when open) in 30mm complete all as specified and as directed by Engineer in charge.
67Material and labour for reinforced cement concrete 1:2:4 type "B1" ( using 20 mm graded stone aggregate) as coping, kerbs, cills, steps, parapets, RCC chajjs slope kerbs water troughs and the like, including broken chajjas and broken roof projections etc..., rounded or chamfered on edges including necessary form work as required complete all as specified and as directed by Engineer in charge.
68Material and labour for cutting holes in bricks wall in CM for inserting holdfasts and making good dismantled portion in CM (1:3) depth of embedded portion of holdasts in wall exceeding one brick but not exceeding two bricks complete all as specified and as directed by Engineer in charge.
69Supply and fix holdfasts in the walls of size 300 mm long, using Flat 40 x 3 mm thick, complete all as specified and as directed by Engineer in charge.
70Supply and fix Galvanised iron wire 6 mm dia complete all as specified and as directed by Engineer in charge.
71Material and labour for 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified and as directed by Engineer in charge.
72Supply and fix 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply.The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated complete all as specified and as directed by Engineer in charge.
73Material and labour for preparation of wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer complete all as specified and as directed by Engineer in charge.
74Taking down carefullyexisting aluminium/copper point wiring on battenor in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making goodthe disturbedsurfaces of walls, Floors, ceilings etc to match with existing complete all as specified and as directed by Engineer in charge.
75Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such asswitches, sockets ,ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings,ceiling fans ,exhaust fans and regulators ceiling rose etc complete all as specified and as directed by Engineer in charge.
76Material and labour for Point wiring with PVC insulated unsheathed and multistranded copper conductor cable ISI marked, 1100 volt grade.FRLS of size 1.5 Sqmm drawn in and including concealed PVC rigid conduite of size not less than 20mm dia with modular metal flush boxconcealed andmodular white plates with frameof suitable size as required at site with PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected common earth dolly as specified for one light point controlled by one switch for light/Fan complete all as specified and as directed by Engineer in charge. Note : (i)Rate quoted shouldinclude cost of modular metal flux box concealedand making good walls (ii)Rate include themodular white cover plate with frame. (iii) Necessary blank plate as required at site.
77All as per item No 76 here in before but one 3 pin 5 amps switch sockets on same board complete all as specified and as directed by Engineer in charge.
78All as per item No 76 here in before but one 3 pin 5 amps switch sockets on independent board complete all as specified and as directed by Engineer in charge.
79All as per item No 76 here in before but with cable size 2.5 Sqmm and 2.5 Sqmm as earthwire for 3/5 pin socket out let independent, 15/16 Amps complete all as specified and as directed by Engineer in charge.
80Material and labour for Submain wiring with Two runs of4.0 sqmm sizemulti stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metalic conduit and one run of PVC insulated cable of size 4.0 sqmm size multi stranded copper conductor PVC insulated and unsheathed for continious earth wire including all connections complete all as specified and as directed by Engineer in charge.
81Supply and fix modular Switch and socket combination 3 pin 5 Amp AC 230 Volts piano flush type complete all as specified and as directed by Engineer in charge.
82Supply and fix modular Switch and socket combination 6 pin 15 Amp AC 230 V complete all as specified and as directed by Engineer in charge.
83Supply and fix modular type switch 6 Amp single pole one way complete all as specified and as directed by Engineer in charge.
84Supply and fix modular type Socket,6A - 2/3 pin combined 2 module complete all as specified and as directed by Engineer in charge.
85Supply and fix Ceiling rosethree terminals polycarbonate, isolated body complete all as specified and as directed by Engineer in charge.
86Supply, laying and testing of 4 core 10 Sqmm cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor offollowingincluding taking down unserviveable cable complete all as specified and as directed by Engineer in charge.
87Supply and lay burnt bricks sub class "B"brick for cable protection complete all as specified and as directed by Engineer in charge.
88Supply and fix for sand cushioning with Local Sand in two layer,first layer of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts for cable including consolidation of each layer complete all as specified.Note:Thickness of sand cusioning shall be measured after punning complete all as specified and as directed by Engineer in charge.
89Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 depth and getting out soft/loose soil for laying cables/pipes/erection of poles etc. complete all as specified and as directed by Engineer in charge.
90Returning filling in, with excavated soils incl. spreading, levelling, watering and well ramming in layers n.exc. 25 Cms. complete all as specified and as directed by Engineer in charge.
91Removing excavated material/ surplus soil exceeding 250 M and n.exc. 500M and depositing where directed at a level n.exc. 1.50 M above the starting point, complete all as specified and as directed by Engineer in charge.
92Supply and fix ceiling fan 1200 mm sweep along with necessary fixing arrangements including all connections complete all as specified and as directed by Engineer in charge.
93Supply and fix exhaust fan 300 mm sweep made of PVC material with louvers incl making the hole on wall along with necessary fixing arrangements complete all as specified and as directed by Engineer in charge.
94Supply and fix Surface and wall mounted LED 20Watt 4ft longbatten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10% suitable pre wired and testing including all connections complete all as specified and as directed by Engineer in charge. Make: Havells Cat No ENDURALINEARNEOBS20WLED865SPCWH or its equivalent in Philips/Bajaj/Wipro/CG
95Supply and fixSurface and wall mounted LED 10 Watt 2Ft long batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver having THD<10% suitable pre wired and testing completeincluding all connections complete all as specified and as directed by Engineer in charge. Make: Havells Cat No ENDURALINEARNEOBS10WLED865SPCWH or its equivalent in Philips/Bajaj/Wipro/CG
96Supply and fix false ceiling light Environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling. 120 lumen output of size 2 ft x 2 ft recessed mounted full open type to deliver extra ordinary lumens through its pure form and glare-less light complete all as specified and as directed by Engineer in charge. Make: Havells Cat No STRATO2X2PLR36WLED840MODor its equivalent in Philips / wipro / Bajaj
97Supply and fix LED 24 W building security light luminaire epoxy coated,energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and as directed by Engineer in charge. Make : Havells Cat No. ENDURAPEARLSL30WLED757SASYTOPCMP or its equivalent in CG/Wipro/Philips
98Supply and fix in replacement MCB SPN 40 Amp 240 V, 50 Hz, complete all as specified and as directed by Engineer in charge.
99Supply and fix in replacement MCB SP 5 to 30 Amp, 240 V, B Series, complete all as specified and as directed by Engineer in charge.
100Supply and fix in replacementMCB DB SPN 8 way with 200 Amp copper bus bar double door type complete all as specified and as directed by Engineer in charge.
101Material and labour for Earthing complete with galvanised steel plate electrode 600 x 600 x6mm thick buried directly in ground vertically to a depth not less than 2.25mtr below ground level with top edge of earth plate at a depth 1.5mtr below ground level connected with galvanised steel strip of size 32 x 6 mm up to DB/main switch as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia light grade GI tubing, funnel, wire mesh, 20mm bore GI tubing medium grade watering pipe, including concrete pit in PCC 1:3:6 type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle of suitable size, charcole and salt in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing complete including taking down of unserviceable materials of old earthing complete all as specified and as directed by Engineer in charge.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail