Water Supply And Sanitation Department-WSSD has published Augmentation Of Providing Water Supply Scheme Village Abadi Channa Ghoga, Ghoga (Mh-Fc) Block Chogawan Distt Amritsar (Under Punjab Rural Water & Sanitation Sector Improvement Project (1A-Iii/Hp)Part - A Drilling Installation And Commissioning Of 150Mm I/. Submission Date for this Tender is 26-09-2022. Pumping Machiney Tenders in Amritsar Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 29-Jul-2021 | Corrigendum No. 3661 Dated 29-07-2021 | Date | 05-08-2021 |
2 | 05-Aug-2021 | corrigendum no. 3777 dated 05-08-2021 | Date | 12-08-2021 |
3 | 12-Aug-2021 | Corrigendum No. 3861 Dated 12-08-2021 | Date | 19-08-2021 |
4 | 19-Aug-2021 | Corrigendum No. 3934 Dated 19-08-2021 | Date | 26-08-2021 |
5 | 27-Aug-2021 | Corrigendum No. 4120 | Date | 02-09-2021 |
6 | 03-Sep-2021 | Corrigendum no. 4220 dated 02-09-2021 | Date | 09-09-2021 |
7 | 09-Sep-2021 | COrrigendum No. 4267 Dated 09-09-2021 | Date | 16-09-2021 |
8 | 16-Sep-2021 | Corrigendum No. 4461 Dated 16-09-2021 | Date | 23-09-2021 |
9 | 24-Sep-2021 | COrrigendum No. 4527 Dated 23-09-2021 | Date | 30-09-2021 |
10 | 01-Oct-2021 | Corrigendum No. 4657 Dated 01-10-2021 | Date | 11-10-2021 |
11 | 11-Oct-2021 | Corrigendum No. Spl-1 Dated 11-10-2021 | Date | 18-10-2021 |
12 | 18-Oct-2021 | Corrigendum No. Spl-1 Dated 18-10-2021 | Date | 25-10-2021 |
13 | 25-Oct-2021 | Corrigendum No. Spl-17 Dated 25-10-2021 | Date | 01-11-2021 |
14 | 02-Nov-2021 | Corrigendum No. Spl-02 Dated 02-11-2021 | Date | 08-11-2021 |
15 | 08-Nov-2021 | Corrigendum No. 4870 Dated 08-11-2021 | Date | 15-11-2021 |
16 | 15-Nov-2021 | Corrigendum No. 5108 Dated 15-11-2021 | Date | 22-11-2021 |
17 | 23-Nov-2021 | Corrigendum No. 5156 dated. 22-11-2021 | Date | 29-11-2021 |
18 | 29-Nov-2021 | Corrigendum No. 5275 Dated 29-11-2021 | Date | 06-12-2021 |
19 | 07-Dec-2021 | corrigendumno.6178 dated07-12-2021 | Date | 13-12-2021 |
20 | 13-Dec-2021 | Corrigendum No. 6268 Dated 13-12-2021 | Date | 20-12-2021 |
21 | 20-Dec-2021 | Corrigendum No. 6720 Dated 20-12-2021 | Date | 27-12-2021 |
22 | 27-Dec-2021 | Corrigendum No. Spl-5 Dated 27-12-2021 | Date | 03-01-2022 |
23 | 03-Jan-2022 | Corrigendum No 6836 Dated 03-01-22 | Date | 17-01-2022 |
24 | 17-Jan-2022 | Corrigendum No. 224 Dated 17-01-2022 | Date | 31-01-2022 |
25 | 31-Jan-2022 | Corrigendum No. 390 Dated 31-01-2022 | Date | 14-02-2022 |
26 | 14-Feb-2022 | Corrigendum No. 747 Dated 14-02-2022 | Date | 22-02-2022 |
27 | 22-Feb-2022 | Corrigendum No. 853 Dated 22-02-2022 | Date | 02-03-2022 |
28 | 02-Mar-2022 | Corrigendum No. 1011 Dated 02-03-2022 | Date | 09-03-2022 |
29 | 09-Mar-2022 | Corrigendum No. 1227 Dated 09-03-2022 | Date | 16-03-2022 |
30 | 17-Mar-2022 | Corrigendum NO. 1451 dated 17-03-2022 | Date | 28-03-2022 |
31 | 28-Mar-2022 | Corrigendum No. 1740 Dated 28-03-2022 | Date | 04-04-2022 |
32 | 05-Apr-2022 | Corrigendum No. 3012 Dated 05-04-2022 | Date | 11-04-2022 |
33 | 11-Apr-2022 | Corrigendum No. 2348 Dated 11-04-2022 | Date | 18-04-2022 |
34 | 18-Apr-2022 | Corrigendum No. 2451 Dated 18-04-2022 | Date | 21-04-2022 |
35 | 22-Apr-2022 | Corrigendum No. 2572 Dated 21-04-2022 | Date | 28-04-2022 |
36 | 28-Apr-2022 | Corrigendum No. 2927 Dated 28-04-2022 | Date | 05-05-2022 |
37 | 06-May-2022 | Corrigendum No. 3067 Dated 05-05-2022 | Date | 12-05-2022 |
38 | 13-May-2022 | Corrigendum NO. 3337 Dated 13-05-2022 | Date | 19-05-2022 |
39 | 20-May-2022 | Corrigendum No. 3522 Dated 19-05-2022 | Date | 26-05-2022 |
40 | 27-May-2022 | Corrigendum No. 3688 Dated 27-05-2022 | Date | 01-06-2022 |
41 | 01-Jun-2022 | Corrigendum No. 3832 Dated 01-06-2022 | Date | 08-06-2022 |
42 | 08-Jun-2022 | Corrigendum No. 3893 Dated 08-06-2022 | Date | 15-06-2022 |
43 | 15-Jun-2022 | Corrigendum No. 3934 Dated 15-06-2022 | Date | 22-06-2022 |
44 | 22-Jun-2022 | Corrigendum No. 4059 Dated 22-06-2022 | Date | 29-06-2022 |
45 | 30-Jun-2022 | Corrigendum No. 4151 Dated 29-06-2022 | Date | 06-07-2022 |
46 | 07-Jul-2022 | Corrigendum No. 4299 Dated 06-07-2022 | Date | 13-07-2022 |
47 | 13-Jul-2022 | Corrigendum No. 4405 Dated 13-07-2022 | Date | 25-07-2022 |
48 | 25-Jul-2022 | Corrigendum No. 4622 Dated 25-07-2022 | Date | 01-08-2022 |
49 | 02-Aug-2022 | Corrigendum No. 4739 Dated 02-08-2022 | Date | 08-08-2022 |
50 | 09-Aug-2022 | Corrigendum No. 4888 Dated 08-08-2022 | Date | 16-08-2022 |
51 | 16-Aug-2022 | Corrigendum No. 5005 Dated 16-08-2022 | Date | 23-08-2022 |
52 | 23-Aug-2022 | Corrigendum No. 5041 Dated 23-08-2022 | Date | 30-08-2022 |
53 | 31-Aug-2022 | Corrigendum No. 5066 Dated 30-08-2022 | Date | 06-09-2022 |
54 | 06-Sep-2022 | Corrigendum No. 5278 Dated 06-09-2022 | Date | 15-09-2022 |
55 | 16-Sep-2022 | Corrigendum no. 5414 dated 15-09-2022 | Date | 26-09-2022 |
Name of Work:- Augmentation of Providing Water Supply Scheme Village ABADI CHANNA GHOGA, GHOGA (MH-FC) Block Chogawan Distt Amritsar (Under Punjab Rural Water & Sanitation Sector Improvement Project (1A-III/HP) Part - A Drilling Installation and commissioning of 150mm i/d T/well & 120 mtr depth, Construction of Pump Chamber 2.20 x 2.20mtr , Construction of one No. RCC OHSR 25000 ltrs capacity having height 17.20m up to FSL and 15.50m upto top of bed level, Plinth Protection around OHSR, providing and fixing double flanged pipes, valves and specials, automatic water level control device etc, Providing & fixing Pumping Machinery, Rising Main, Development of Water works and Distribution system and all other works contingents there to". PART - BOperation & Maintenance of entire water supply scheme including Pump oprator cum-chowkidar,, lawns with fine grassing & ornamental plants with manure & watering etc for three month aftercompletion at water work site. Sodium Hypochlroide Solution for Disinfecting (cost for 3 months) | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Boring with casing pipe for tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested, equipment as required such as hand boring machine and its accessory,transportation to site and vice versa etc. complete in all respect.\nBoring with 200mm I/d Housing Pipe\n0 to 120m | iteam1 | 120 | Mtr |
2 | 2 | Supplying, lowering of MS Pipe as per IS: 4270-2001 including MS sockets having dimensions as per IS code duly welded with MS electrode to have extra strength to lower the pipe into tubewell bore.\n150mm nominal diameter (weight 21.6 kg per meter) 5.4mm thickness | iteam2 | 106 | Mtr |
3 | 3 | Supplying, fixing & lowering of Stainless Steel Cage type wire wound screen as per IS: 8110-2000 or latest ISI Marked, Duly welded with suitable grade S.S welding electrode to lower the strainer into tube well bore.\n150mm steel strainer (slot size 0.15/0.20 mm) 5.00 mm thickness | iteam3 | 10 | Mtr |
4 | 4 | Supplying, fixing and lowering of stainless steel socket as per IS 8110-2000 or latest, ISI Marked duly welded with suitable grade SS Welding electrode to lower the strainer into tubewell bore complete in all respect\n150mm internal diameter | iteam4 | 3 | Each |
5 | 5 | Supplying, Lowering & fixing of M.S. special socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect.\n150 mm internal diameter | iteam5 | 4 | Each |
6 | 6 | Supplying at site Wooden box of suitable size with Lid & locking arrangment for preserving strata sample collected from the bore. | iteam6 | 1 | Each |
7 | 7 | Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect | iteam7 | 1 | Each |
8 | 8 | Supplying & fixing of bail plug of M.S. pipe complete with inverted U-hook attached to the bottom plug complete in all respect.\n150mm internal diameter (weight 21.6 kg per meter) 5.4 mm thickness | iteam8 | 4 | Mtr |
9 | 9 | Supplying and fixing M.S well cap having thread to fix on housing pipe complete in all respect \n150 mm internal diameter | iteam9 | 1 | Each |
10 | 10 | Development of stabilizing of the tube well with air compressor of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. \nCapacity of Air compressor 300 cfm at 250 PSI | iteam10 | 10 | Hrs |
11 | 11 | Development of stabilizing of the tube well with submersible pump of required capacity as directed by the engineer-in-charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge. | iteam11 | 4 | Hr |
12 | 12 | Collection of water sample from different strata and testing of sample from approved laboratory (Physical & chemical Analysis) | iteam12 | 3 | Each |
13 | 13 | Testing of water sample for Heavy metal from approved laboratory (Toxic material such as Arsenic, lead, mercury, pesticide etc.) | iteam13 | 1 | Each |
14 | 14 | Provision for Sanitary Clay Seal (as per BIS Code IS 2800: 2019) including Sterlization of Tubewell | iteam14 | 1 | L.S. |
15 | 15 | Construction of one No. RCC OHSR having capacity 25 KL (25,000 ltrs) height 17.20 mtr. up to FSL & 15.50 mtr. up to sill level from formation level complete with external RCC stair case with landing slabs at each staging RCC roof, ventilator single man hole cover lightening conductor, aluminium ladder inside tank portion etc. complete as decribed in schedule No. 3. Providing & fixing DI/D/F expansion joint conforming to IS -1536-1989 or latest and bail mouth and D/F puddle collars as per DWSS design, Duck foot bends conforming to ISI-13382 and CI/DF sluice Valve duly ISI marked ( IS 14846-2000 or latest) one each with inlet, outlet and scour pipes including providing and installing intel, outlet, scour pipes and overflow DI double flanged pressure pipes horizontally cast in sand moudls as per IS 8329-2000 and latest duly ISI marked from bottom dome to duck foot bend and further up to 2.75 mtr as per detail specification. TMT steel and painting of all complete shall be included in cost complete in all respect as per specifications. . \n\n(The specification & drawing are based on safe bearing capacity of soil of 8.75 tones per sqm. In case the safe bearing capacity of soil is less than 8.75 tone per sqm. the contractor shall submit his own design for foundation portion based on actual safe bearing standard capacity as per DWSS specifications. The difference in quantites from the standard drawing based on 8.75 tone per sqm. to the safe bearing capacity will be paid as per CSR+prevalling celling premium). It also includs, providing & fixing automatic Electronic water level control device and construction of Plinth protection around OHSR with masonary toe wall with 40mm thick CC 1:2:4 on top over 100mm thick CC 1:8:16 & inside earth filling including overflow haudi complete in all respects. | iteam15 | 1 | OHT |
16 | 16 | Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed Make capable of delivering 155 LPM against a head of 53 mtr along with electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including G.I. Column Pipe of suitable size 50 mm =31 mtr (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications. | iteam16 | ||
17 | 16.01 | Cost of pumping set | iteam17 | 1 | No. |
18 | 16.02 | Cost of lowering (with length) Size 50mm | iteam18 | 31 | Mtr. |
19 | 16.03 | Cost of submersible Cable (with Length) Size 2.50mm | iteam19 | 35 | Mtr. |
20 | 16.04 | Cost of Panel Board | iteam20 | 1 | Job |
21 | 17 | Providing and installing 100mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects as Annexure A12 – 2 & Drawings D-12 & D-17. | iteam21 | 1 | Each |
22 | 18 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (6kgf/cm2) (excavation & including specials) | iteam22 | ||
23 | 18.01 | PVC pipe 63mm o/d (6kgf/cm2) | iteam23 | 327 | Mtr. |
24 | 18.02 | PVC pipe 90mm o/d (6kgf/cm2) | iteam24 | 36 | Mtr. |
25 | 19 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (6kgf/cm2) (excavation & including specials) | iteam25 | ||
26 | 19.01 | PVC pipe 63mm o/d (6kgf/cm2) | iteam26 | 2656 | Mtr. |
27 | 19.02 | PVC pipe 90mm o/d (6kgf/cm2) | iteam27 | 801 | Mtr. |
28 | 20 | Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting. | iteam28 | ||
29 | 20.01 | PVC pipe 63mm o/d | iteam29 | 1103 | Mtr. |
30 | 20.02 | PVC pipe 90mm o/d | iteam30 | 289 | Mtr. |
31 | 21 | Dismantling of cement concrete road and restoration in original condition | iteam31 | 315 | Mtr. |
32 | 22 | Hand boring Horizontly for crossing of pipe under road or any other obstacle by Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160mm complete. | iteam32 | 12 | Mtr. |
33 | 23 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy pattern) as per IS 778 with hand wheels, on GI Pipe lines laid in the ground or inside buildings including all carriages complete\n50MM i/d Gun Metal peet valve heavy pattern | iteam33 | 8 | Each |
34 | 24 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)\nClass PN-1 as per ISI\n80mm I/d | iteam34 | 2 | Each |
35 | 25 | Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete \n1 kg I.e (2 x1 = 2kg) | iteam35 | 2 | Kg. |
36 | 26 | Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department with each of Size 0.6m x 0.6m | iteam36 | 2 | Each |
37 | 27 | Providing proposed water Connection to household up to wall with providing ,laying, jointing, fixing, testing MDPE pipe line 15 mm i/d = 2.00 mtr(Below GL) and ISI Marked G.I. Pipe 15 mm i/d (As per IS 1239) B-Class approved make = 2.50 mtr (Above GL) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM Ferrule as per IS:2692 and 3" i/d clamp with CI Bib Cock 15 mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete in all respects. | iteam37 | 135 | Nos. |
38 | 28 | Providing & Fixing proposed (Brass Ball Valve 15mm i/d, GI Nipples 15mmx150mm 15mmx100mm, GI Elbow, GI Union, GI Hooks & GI Filter Including ISI Marked Water Meter Complete in all respects all respects. | iteam38 | 135 | Nos. |
39 | 29 | Providing, Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6 Litres of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS standard specifications. | iteam39 | 1 | Job |
40 | 30 | Construction of Pump Chamber Below OHSR Size2.20x2.20m including electric wiring as per analysis, Complete in all respects. | iteam40 | 1 | Job |
41 | 31 | Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8. | iteam41 | 282 | mtr |
42 | 32 | Providing & Fixing PCC Fencing Poles With 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects | iteam42 | 39 | Each |
43 | 33 | Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7. | iteam43 | 30 | Each |
44 | 34 | Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3. | iteam44 | 4 | Each |
45 | 35 | Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including D-4 & Analysis A-4 complete in all respects | iteam45 | 1 | Each |
46 | 36 | Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7. | iteam46 | 20 | mtr |
47 | 37 | Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing D-20 | iteam47 | 1 | Each |
48 | 38 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (10kgf/sqcm) (excavation & including specials) \n(iii) 110mm o/d pipe of 10 Kgf/sqcm | iteam48 | 30 | mtr |
49 | 39 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)\n100mm o/d | iteam49 | 2 | Each |
50 | 40 | Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (2 no. each of size 0.9m x 0.9m | iteam50 | 2 | Each |
51 | 41 | Providing, Fixing, Installing, Commissioning, Solar Panel Energy System (Monocrystalline) for amount of electric power required for running electric motor and other appliances such as fan, tube, Bulb etc in water works site. including Bi-directional meter and inverter of suitable capacity as per guidelines issued by PEDA complete in all respects.\n(Solar Panel Energy System Deduct 1 km produced 4 units per day) | iteam51 | 3 | K.W. |
52 | 42 | Operation & Maintenance of entire water supply scheme including Pump oprator cum-chowkidar, consumables, lawns with fine grassing & ornamental plants with manure & watering etc for three month aftercompletion at water work site. Sodium Hypochlroide Solution for Disinfecting (cost for 3 months) | iteam52 | 1 | Job |
53 | 43 | Rough grassing including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, levelling and dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting doob grass in rows 15 cm apart in both directions, watering and maintenance till first mowing. | iteam53 | 77 | sqm |
54 | 44 | Digging of pits in all kinds of soil & refilling the same, with the excavated earth mixed with well decayed farm yard manure @ 30% of pit volume and insecticide for termite control | iteam54 | 3 | cum |
55 | 45 | Supplying and planting permanent trees in prepared pits and watering | iteam55 | 3 | Each |
56 | 46 | Planting ground covers (ordinary) including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 25cm distance from plant to plant and row to row. | iteam56 | 4 | sqm |
57 | 47 | Planting bulbous flower beds including digging of beds to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant and row to row. | iteam57 | 2 | sqm |
58 | 48 | Provision for one way stand post with khura complete in all respect. | iteam58 | 1 | Job |
59 | 49 | Carriage of Bajri (Course Agrregate) | iteam59 | 58.84 | cum |
60 | 50 | Carriage of Sand (Fine Aggregate) | iteam60 | 35.64 | cum |
61 | 51 | CONDITIONS :- | iteam61 | ||
62 | 51.01 | Item for which no rate or price has been entered in will not be paid for the Employer when execut6ed and shall be deemed covered by the other rates and prices in the Bill of Quantities. | iteam62 | ||
63 | 51.02 | Unit rates and prices shall be quated by the bidder in indian ruppees. | iteam63 | ||
64 | 51.03 | Where there is a discrepancy between the rate in figures and words, the rates in words will govern. | iteam64 | ||
65 | 51.04 | Where there is a discrepancy between the rate and the line total resulting from muluplying the unit rate by quantity the unit rate quoted shall govern. | iteam65 | ||
66 | 51.05 | Any item of work not included in the above contract schedule of rates and got done at the site of work; the same will be paid according to CSR-2010 subject to the premium or discount tendered by the contractor. In the case of non-schedule items, the decision of the Engineer-in-charge will be final and binding upon the contractor. In case any item which is a part of lump-sum rate is be deducted @CSR rates + Ceiling premium prevailing on the date of tender | iteam66 | ||
67 | 51.06 | The work will be carried out in accordance with PWD Book of specifications - 1963 edition with upto date amendments. | iteam67 | ||
68 | 51.07 | Approximate quantities are given in the contract schedule of rates and these can vary at the time of execution of the work. The payment will be made according to the actual work done by the contractor. | iteam68 | ||
69 | 51.08 | All amendments issued on the common schedule of rates 2010. up to the date of opening of tenders will be applicable on the contract schedule of rates. | iteam69 | ||
70 | 51.09 | Contractor should clearly quote his rates in figures & words. Conditional tender will be rejected. | iteam70 | ||
71 | 51.1 | All items and rates provided in the DNIT are subject to the footnotes give in CSR-2010 | iteam71 | ||
72 | 51.11 | The Engineer-in-charge will have full powers to change the layout of the work covered in this contract if considered necessary. | iteam72 | ||
73 | 51.12 | No claim will be entertained form the contractor in case, any mistake in description rates or unit occurs in any item taken in this schedule while preparing this DNIT or on account of typing or comparison or over writing. The same will be rectified at any time as per common schedule of rates 2010 along with upto date amendments. | iteam73 | ||
74 | 51.13 | The arrangements of bricks at site of work would be done by the contractor at his own level from his own source. | iteam74 | ||
75 | 51.14 | For any other non-schedule items, the contractor will submit through Engineer-in-charge, the analysis of rates in triplicate based on purchased vouchers. A margin of 10% shall be allowed for material components and 21.5% on labour components and contractor shall produce photo stat copies of the purchase vouchers in support of his claim. The decision of the Engineer-in-charge/Competent authority in the matter shall be final and binding on the contractor. | iteam75 | ||
76 | 51.15 | All the extra items will be got approved from the competent authority and no premium will be allowed on non schedule item | iteam76 | ||
77 | 51.16 | Pavement for the carriage of material shall be paid as per the rates quoted by the tenderer. | iteam77 | ||
78 | 51.17 | Time period allowed for completion of work in 12 months. Including 3 months O & M | iteam78 | ||
79 | 51.18 | If contractor allowed for completion of work within 7 days from the date of allotment, DWSS reserve the right to impose penalty or withdraw the work and propose action for debarring in future tendering or both; decision of Chief Engineer (North) shall be binding. | iteam79 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail