Supply Of Supply Of Multi Section Digital Axle Countersupply Of Multi Section Digital Axle Counter,Supply Of Multi Section Digital Axle Counter Complete Set With All Accessories Consisting Of CompleteIndoor And Outdoor Equipment Including Reset Box, Lv B-Uttar Pradesh

Supply Of Supply Of Multi Section Digital Axle Countersupply Of Multi Section Digital Axle Counter,Supply Of Multi Section Digital Axle Counter Complete Set With All Accessories Consisting Of CompleteIndoor And Outdoor Equipment Including Reset Box, Lv Box And Monitoring Console As Per Rdso Specification No.Rdso/Spn/176/2013 (Ver. 3) With Latest Amendment/Revision Of Required Track Section. It Includes TransportationTo Sse Depot And From Sse Depot To Site. Inspection By Rdso ( 1 No = 1 Dp ). Note: 1. If Any Housing Is RequiredTo Keep Outdoor Equipment, It Has To Be Supplied With The Equipment With No Extra Cost. 2. Maintenance FreeEarthing (Supply And Installation) For Track Device/Mushroom Housing To Be Done By The Contractor If Required BySystem Design. No Separate Payment Will Be Made. 3. Automatic Resetting Of Axle Counter By Axle Counter InDual Or By Aftc/Dctc Track In Dual Has To Be Provided. All Hardware Software For Auto Resetting To Be ProvidedBy The Contractor. 4. All Other Hardware Like Tpr, Extra Cards Modem, Ethernet Switches, Etc. Required ForCommissioning And Final Track Section Pickup Will Be Supplied By The Contractor. Separate Evaluator To Be ProvidedFor Up And Dn Line As Well As At Station Or Rh As Decided By The Site Engineer. Manual Resetting Through ResetBox/Lv Box Or Through Vdu At Station To Be Provided As Per Requirement Given By Site Engineer. 6. Supply ShouldBe Regulated As Per Letter No. Ncr/S&T/1048/Signal/Ei/Pt-4 Dated 18.01.2019 (Letter Attached) Special Note -Vendors Are Approved By Vendor Approving Agencies, In Case Bidder Is Not The Approved Source, The Bidder ShallSubmit The Authorization Of The Approved Source For Warranty/Amc Support As Per Contract. , Supply Of Service Test Panel Including Meter For Testing Of Track Equipment, Tools For Mounting AndAdjustment Of Track Equipment And Standard Jig For Drilling Holes In Rail. It Should Be As Per PrincipleManufacturings (Oem) Recommended List Adequate For Installation, Day To Day Maintenance And Adjustment OfIndoor And Outdoor Gears. This Shall Also Include Kit Of Marking And Drilling Of Holes On Rail. Inspection By Rdso. , Installation, Testing And Commissioning Of Multi Section Digital Axle Counter (Msdac) CompleteSet With All Accessories Consisting Of Complete Indoor And Outdoor Equipment Including Reset Box, Lv Box AndMonitoring Console As Per Rdso Specification No. Rdso/Spn/176/2013 (Ver. 3) With Latest Amendment/RevisionOf Required Track Section. It Includes Transportation. ( 1 No. = 1 Dp ) Note: It Includes Supply Of Hdpe Pipe ForLaying Of Transmitter And Receiver Cable, Digging Of Trench Under Track Upto Location/Mushroom Housing. All OtherAccessories Required For Commissioning Will Be Provided By The Contractor. , Supply Of Multi Section Digital Axle Counter Complete Set With All Accessories Consisting Of CompleteIndoor And Outdoor Equipment Including Reset Box, Lv Box And Monitoring Console As Per Rdso Specification No.Rdso/Spn/176/2013 (Ver. 3) With Latest Amendment/Revision Of Required Track Section. It Includes TransportationTo Sse Depot And From Sse Depot To Site. Inspection By Rdso ( 1 No = 1 Dp ). Note: 1. If Any Housing Is RequiredTo Keep Outdoor Equipment, It Has To Be Supplied With The Equipment With No Extra Cost. 2. Maintenance FreeEarthing (Supply And Installation) For Track Device/Mushroom Housing To Be Done By The Contractor If Required BySystem Design. No Separate Payment Will Be Made. 3. Automatic Resetting Of Axle Counter By Axle Counter InDual Or By Aftc/Dctc Track In Dual Has To Be Provided. All Hardware Software For Auto Resetting To Be ProvidedBy The Contractor. 4. All Other Hardware Like Tpr, Extra Cards Modem, Ethernet Switches, Etc. Required ForCommissioning And Final Track Section Pickup Will Be Supplied By The Contractor. Separate Evaluator To Be ProvidedFor Up And Dn Line As Well As At Station Or Rh As Decided By The Site Engineer. Manual Resetting Through ResetBox/Lv Box Or Through Vdu At Station To Be Provided As Per Requirement Given By Site Engineer. 6. Supply ShouldBe Regulated As Per Letter No. Ncr/S&T/1048/Signal/Ei/Pt-4 Dated 18.01.2019 (Letter Attached) Special Note -Vendors Are Approved By Vendor Approving Agencies, In Case Bidder Is Not The Approved Source, The Bidder ShallSubmit The Authorization Of The Approved Source For Warranty/Amc Support As Per Contract.

Refer document

INR 5000000.0 /-

Refer document