}

Augmentation Regional Water Supply Scheme 10 Blm-A ( Bilochia ) Under Jjm In The Jurisdiction Of Phed Sub Div . Srivijaynagar Division Suratgarh, Srivijaynagar-Rajasthan

Public Health Engineering Department-PHED has published Augmentation Regional Water Supply Scheme 10 Blm-A ( Bilochia ) Under Jjm In The Jurisdiction Of Phed Sub Div . Srivijaynagar Division Suratgarh. Submission Date for this Tender is 28-07-2021. Water Supply Project Tenders in Srivijaynagar Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

28474093
Augmentation Regional Water Supply Scheme 10 Blm-A ( Bilochia ) Under Jjm In The Jurisdiction Of Phed Sub Div . Srivijaynagar Division Suratgarh
Open Tender
Indian
Rajasthan
Srivijaynagar
28-07-2021

Tender Details

Augmentation Regional Water Supply Scheme 10 Blm-A ( Bilochia ) Under Jjm In The Jurisdiction Of Phed Sub Div . Srivijaynagar Division Suratgarh

Key Value

Document Fees
INR 2000 /-
EMD
Refer document
Tender Value
INR 1.96 Crore /-

BOQ Items

Name of Work: AUGMENTATION REGIONAL WATER SUPPLY SCHEME 10 BLM-A (BILOCHIA) under JJM in the jurisdiction of PHED Sub Div. Srivijaynagar Division Suratgarh
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Rejuvenation of Desilting Chambers of Raw Water Conveyance System at RWSS 10 BLM-A. BI01010001010000000000000515BI0100001112
2 2 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils BI01010001010000000000000515BI0100001113 50 Cum
3 3 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001114 2.5 Cum
4 4 Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 4 (1 cement : 4 coarse sand) BI01010001010000000000000515BI0100001115 29 Cum
5 5 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm thick. BI01010001010000000000000515BI0100001116 250 Sqm
6 6 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix \n1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001117 2.5 Cum
7 7 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square,rectangular hollow tubelar sections are used or grill made by flats only BI01010001010000000000000515BI0100001118 400 Kg
8 8 Provision for Rejuvenation of Storage Tanks 2 Nos. (1x3800 KL, 1x6200 KL) with rejuvenation of Sump Well 2 M dia at RWSS 10 BLM-A BI01010001010000000000000515BI0100001119
9 9 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils BI01010001010000000000000515BI0100001120 250 Cum
10 10 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. .In Cement mortar. BI01010001010000000000000515BI0100001121 40 Cum
11 11 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. BI01010001010000000000000515BI0100001122 1350 Sqm
12 12 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. : 1:4:8 or leaner mix. BI01010001010000000000000515BI0100001123 5 Cum
13 13 Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 4 (1 cement : 4 coarse sand) BI01010001010000000000000515BI0100001124 230 Cum
14 14 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001125 20 Cum
15 15 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :: 12 mm thick. BI01010001010000000000000515BI0100001126 1500 Sqm
16 16 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm thick. BI01010001010000000000000515BI0100001127 650 Sqm
17 17 Silt clearance from Sedimentation cum storage tank with lift upto 4.5 Mtr. and lead upto 50 Mtr. Silt to be disposed outside of Headworks Boundaries. Disposed silt to be levelled and neatly dressed including stacking of useful material if any available during excavation for all kind of soil. Silt to be carried out by means of mechanical system i.e. Tractor craw/Trolly or any other mechanical system. No extra payment shall be done for lift of any limit. This work also involves dressing of bottom purposed which is to be done mannually to be maintained as per direction of Engineer In Charge. BI01010001010000000000000515BI0100001128 1500 Cum
18 18 Add :- Extra for every additional lead up to 1 KM. BI01010001010000000000000515BI0100001129 1500 Cum
19 19 Preparing surface levelled & dressed to proper slope & laying over it on tibba sand properly rommed and watered in 2 Layers of 5 cm each, Providing and laying 250 micron LDPE film as per ISS:2506-1984 including overlapping on the finished surface of compacted tibba sand. Over LDPE film 15 mm thick cement bajri mortar 1:3 shall be provided and laid which shall be cured properly. Over the base mortar single layer Ist class brick lining in cement bajri mortar 1:3 shall be provided with joints not more than 8 mm and curing done for 14 days. This also includes providing weedicides & anti-termite treatment as per specifications. BI01010001010000000000000515BI0100001130 1200 Sqm
20 20 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) : Flush / Ruled/ Struck or weathered pointing. BI01010001010000000000000515BI0100001131 4200 Sqm
21 21 Pumping out water caused by springs, tidal or river seepage, broken water main or drains and the like with pumping set of following H.P. including P.O.L. / Power consumption etc. Complete. . 20 to 30 H.P. BI01010001010000000000000515BI0100001132 30 Hrs.
22 22 Providing and fixing PVC float in Raw Water Storage tank with CI tail piece 150mm dia-2 Nos, CI puddle collar-150mm dia- 1.20 M- 1 No. and PVC hose pipe- 150mm dia -6 M & all accessaries complete in all respect as per Instructions of Engineer In Charge. Complete Job BI01010001010000000000000515BI0100001133 2 Job
23 23 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable fordrinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick.Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6, 150 mm dia BI01010001010000000000000515BI0100001134 2 Each
24 24 Part 'B' Rejuvenation of Raw Water Sump Well 2 M dia BI01010001010000000000000515BI0100001135
25 25 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils BI01010001010000000000000515BI0100001136 10 Cum
26 26 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix \n1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001137 0.31 Cum
27 27 Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 4 (1 cement : 4 coarse sand) BI01010001010000000000000515BI0100001138 4 Cum
28 28 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. BI01010001010000000000000515BI0100001139 50 Sqm
29 29 Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish : 20mm thick BI01010001010000000000000515BI0100001140 80 Sqm
30 30 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting ( height upto 10 m), fixing in position and applying a priming coat of approved steel primer all complete. BI01010001010000000000000515BI0100001141 50 Kg.
31 31 Provision for Providing , laying, jointing , testing and commissoning of rising main pipe line at RWSS 10 BLM-A. BI01010001010000000000000515BI0100001142
32 32 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 150 mm\n BI01010001010000000000000515BI0100001143 150 Mtr
33 33 Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. BI01010001010000000000000515BI0100001144 150 RMT
34 34 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable fordrinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick.Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6, 150 mm dia BI01010001010000000000000515BI0100001145 2 Job
35 35 Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6, 150 mm dia. BI01010001010000000000000515BI0100001146 2 Each
36 36 Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). Flange Socket, Spigot, Hy. Tee. Upto 300 mm Diameter BI01010001010000000000000515BI0100001147 70 Kg
37 37 Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date,\nsuch as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). A/S Tee , Bend, Reducer (All End Socketed) Upto 300 mm Diameter \n BI01010001010000000000000515BI0100001148 250 Kg
38 38 Manufacturing, supplying, lowerring playing and joining in position to correct line sperally welded SAW/fabricators MS having beverled end plates coil confirming to IS 3589-2001 our its latest rivision in amendment for following thikness and inside diameter including all texas transportation and freight inspection charges inspection charges loading /unloading charges including coast of labour and materials special (tee band etc) field joints factory hydraulic testing this section commissioning atc complete papa technical specification and directions of engineer in charges. (excluding earth work i,nternal lining and outcoating) Note-Providing and fixing of all request special as a drawing design and layout are inclusive in RM measurement of the item and sell not be paid separatly. Dia of pipe 150. mm (ID) thickness of 5.0 mm BI01010001010000000000000515BI0100001149 10 RMT
39 39 Providing, lowering, aligning, fixing in position and Jointing in pipe line,CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pr essure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float Stainless Steel AISI 304 / IS: 3444 , Float Guide- HBT1.HP OrificeHTB2/ SS, Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged ccording to IS: 6418, Fastners - CS, All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work. Class PN 1.0 80 mm \n BI01010001010000000000000515BI0100001150 1 Each
40 40 SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU), Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing :\nSS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work. EFM 150 mm BI01010001010000000000000515BI0100001151 1 Each
41 41 Part- B : Construction of chambers for sluice valves, air valves BI01010001010000000000000515BI0100001152
42 42 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils BI01010001010000000000000515BI0100001153 12 Cum
43 43 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001154 0.5 Cum
44 44 Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 6 (1 cement : 6 coarse sand) BI01010001010000000000000515BI0100001155 6 Cum
45 45 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm thick. BI01010001010000000000000515BI0100001156 15 Sqm
46 46 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix \n1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001157 0.5 Cum
47 47 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) BI01010001010000000000000515BI0100001158 65 Kg.
48 48 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: BI01010001010000000000000515BI0100001159 100 Kg.
49 49 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. \nM20 grade Nominal Mix / Design Mix BI01010001010000000000000515BI0100001160 0.5 Cum
50 50 Providing Fitting & Fixing of Monoblock Pumpset at RWSS 10 BLM-A BI01010001010000000000000515BI0100001161
51 51 Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 operating at sync. speed 2900 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions of one of the makes approved by Technical Committee. Centrifugal Monoblock Pump set (Single Stage) 10.00 HP BI01010001010000000000000515BI0100001162 2 Set
52 52 Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 operating at sync. speed 2900 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions of one of the makes approved by Technical Committee. Centrifugal Monoblock Pump set (Double Stage) 15.00 HP BI01010001010000000000000515BI0100001163 2 Set
53 53 P&F GI pipes class-B (External work) With GI fittings(IS:1239 mark) including trenching and refilling earth etc. 80mm dia nominal bore. BI01010001010000000000000515BI0100001164 24 Mtr
54 54 P&F GI pipes class-B (External work) With GI fittings(IS:1239 mark) including trenching and refilling earth etc. 100mm dia nominal bore. BI01010001010000000000000515BI0100001165 24 Mtr
55 55 P&F GI pipes class-B (External work) With GI fittings(IS:1239 mark) including trenching and refilling earth etc. 125mm dia nominal bore. BI01010001010000000000000515BI0100001166 18 Mtr
56 56 Providing, lowering, laying, aligning, fixing in position CI Foot valves in pipe line as per IS:4038-1986 (amended upto date) suitable for potable water at all level/ depth including all material, labour hydraulic testing and commissioning as per technical specifications and as per direction of Engineer for following sizes: 100 mm dia BI01010001010000000000000515BI0100001167 2 Nos
57 57 125 mm dia BI01010001010000000000000515BI0100001168 2 Nos
58 58 Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type Non Return Valves (NRV) of approved make of following Pressure rating & dia complete, confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Cover & disc of Grey cast iron of IS:210/ FG200. Face to face dimensions as per IS 5312 (part -1):2004 , Flanges Drilled as per IS:1538. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660and two coats of black Japan paints conforming toType B of IS 341or paint conforming to IS9862 or IS2932(Non-Toxic- suitable for drinking water) applied inside and outside. Body seat ring of SS/CS Door face ring - EPDM/ Neoprene (food grade quality) ,Shaft of HTB1/ SS- AISI- 410, Hinge Malleable cast iron / SS AISI 316/410 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-Bolt as per IS:1363 and IS: 1367 (galvanised steel) ,Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Class PN 1.0 80 mm dia\n BI01010001010000000000000515BI0100001169 2 Each
59 59 100 mm dia BI01010001010000000000000515BI0100001170 2 Each
60 60 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable fordrinking water) coated with minimum thickness of 250 microns inside and\noutside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick.Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6, 80 mm dia BI01010001010000000000000515BI0100001171 2 Each
61 61 100 mm dia BI01010001010000000000000515BI0100001172 2 Each
62 62 Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6, 80 mm dia. BI01010001010000000000000515BI0100001173 8 Each
63 63 Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6, 100 mm dia. BI01010001010000000000000515BI0100001174 8 Each
64 64 Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). A/F Tee , Bend, Reducer (All End Flanged). Upto 300 mm Diameter BI01010001010000000000000515BI0100001175 320 Kg
65 65 Structural Steel work welded in built up section, trusses and frame work including cutting, hoisting, fixing, fixing in position and applying a priming coat of approved steel primer upto 4.5 Mtr. Hight above plinth level in RS Joists, flats, tees, angles & channels BI01010001010000000000000515BI0100001176 50 Kg
66 66 P & F bolts including nuts and bolts complete. BI01010001010000000000000515BI0100001177 60 Kg
67 67 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix \n1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001178 4 Cum
68 68 Providing, Installation and Commissioning of Electric Composit Panel Board at RWSS 10 BLM-A BI01010001010000000000000515BI0100001179
69 69 SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) BI01010001010000000000000515BI0100001180 9.9 Sqm
70 70 Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending, cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. Electrolytic grade Aluminium bus bar BI01010001010000000000000515BI0100001181 5 Kg
71 71 SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required.With Thermal Magnetic release up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu BI01010001010000000000000515BI0100001182 5 Nos
72 72 200 Amp , 25/35kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu BI01010001010000000000000515BI0100001183 1 Nos
73 73 Providing and fixing of three pole power Contactor confirming to IS 13947-4-1 IEC 60947-4-1. Standard coil voltage 110, 240, 415, 440V 50 Hz as per ISI marked/approved make L&T, GIC, ABB. Simenes Contactor AC3 rating (415) 25 Amp Motor output 3 phase 15 HP BI01010001010000000000000515BI0100001184 6 Nos
74 74 Contactor AC3 rating (415) 32 Amp Motor output 3 phase 20 HP BI01010001010000000000000515BI0100001185 6 Nos
75 75 P & F thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts, manual /auto reset facility including making connection testing etc. as required. Up to 14 Amp, 15 to 20 Amp BI01010001010000000000000515BI0100001186 4 Nos
76 76 SF of selector switch of 10 A for voltmeter (4 position ) including making connection etc. as required . BI01010001010000000000000515BI0100001187 1 Nos
77 77 SF of CT linked selector switch of 10 A for Ampere meter (4 position ) including making connection etc. as required . BI01010001010000000000000515BI0100001188 1 Nos
78 78 SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required. Red/yellow/Green colour BI01010001010000000000000515BI0100001189 17 Nos
79 79 P & F push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required. Luminous type Red , Yellow, Green, Amber BI01010001010000000000000515BI0100001190 8 Nos
80 80 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. BI01010001010000000000000515BI0100001191 1 Set
81 81 S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper. Wire BI01010001010000000000000515BI0100001192 10 Mtr.
82 82 SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type BI01010001010000000000000515BI0100001193 1 Nos
83 83 SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Digital type Below 500 A BI01010001010000000000000515BI0100001194 5 Nos
84 84 SF of Current Transformer , with all necessary support in existing panel including connection etc. as required. up to 150 / 5 Ratio , 5 VA , class 1 accuracy BI01010001010000000000000515BI0100001195 4 Nos
85 85 from 200 / 5 to 400/5 Ratio , 10 VA , class 1 accuracy BI01010001010000000000000515BI0100001196 3 Nos
86 86 P&F of RCBO with overload, short-circuit and earth leakage protection ISI marked (IS12640)/ conforming to IEC 61009/1 complete in all respect including making connections, testing etc. as required. Two pole 100/300mA sensitivity 40 A rating BI01010001010000000000000515BI0100001197 2 Nos
87 87 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 1 x 1.5 sq.mm BI01010001010000000000000515BI0100001198 100 Mtr.
88 88 1 x 2.5 sq.mm BI01010001010000000000000515BI0100001199 25 Mtr.
89 89 1 x 4.0 sq.mm BI01010001010000000000000515BI0100001200 30 Mtr.
90 90 1 x 6.0 sq.mm BI01010001010000000000000515BI0100001201 30 Mtr.
91 91 Supply and laying PVC insulator submersible cable 3 core copper conductor of superior quality making connection etc in the following size as per related code, ISI Marked. Size 4.0 Sq. mm BI01010001010000000000000515BI0100001202 100 Mtr.
92 92 Size 6.0 Sq. mm BI01010001010000000000000515BI0100001203 50 Mtr.
93 93 Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty Copper lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 2 x 2.5 sq.mm BI01010001010000000000000515BI0100001204 150 Nos
94 94 2 x 4.0 sq.mm BI01010001010000000000000515BI0100001205 50 Nos
95 95 2 x 6.0 sq.mm BI01010001010000000000000515BI0100001206 50 Nos
96 96 P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. Single pole MCB 0.5 A to 5 A rating BI01010001010000000000000515BI0100001207 3 Nos
97 97 6 A to 32 A rating BI01010001010000000000000515BI0100001208 6 Nos
98 98 Double pole MCB 6 A to 32 A rating BI01010001010000000000000515BI0100001209 2 Nos
99 99 Triple pole MCB 6 A to 32 A rating BI01010001010000000000000515BI0100001210 7 Nos
100 100 SITC of microprocessor based three phase sensing power factor correction relay having following sensing capacity secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR, metering facility as required. 6 to 8 stage sensitivity up to 50 milli Amp BI01010001010000000000000515BI0100001211 1 Nos
101 101 P & F of 440 Volt 3 pole capacitor (AC 6 B ) duty contactor with 3 no. early make and post break auxiliary contacts in series with quick discharge damping resistors/ reactors to limit the inrush current , conforming to IS:13947-4-1/IEC:947-4-1, Din rail mounting type including making connections, testing etc. as required. suitable for following capacity capacitor bank. 7 to 10 KVAR BI01010001010000000000000515BI0100001212 8 Nos
102 102 SITC of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR . including making connections with suitable capacity conductors/cables testing etc. as required. Heavy duty Three phase 440 V , 50 Hz capacitor (Bank) BI01010001010000000000000515BI0100001213 35 kVAR
103 103 Providing and fixing of Timer as per ISI marked/approved make L&T, GIC, ABB. Simenes Electronic Timer 240/360 volt 415 Hz for 3 to 10sec./9 to 30sec./30 to 120sec BI01010001010000000000000515BI0100001214 4 Nos
104 104 Single phase Prevantor with automatic approved make L&T, Simenes, Vishnu. BI01010001010000000000000515BI0100001215 4 Nos
105 105 P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 25.0 Sq.mm 3.5 core BI01010001010000000000000515BI0100001216 50 Mtr.
106 106 P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 95.0 Sq.mm 3.5 core BI01010001010000000000000515BI0100001217 45 Mtr.
107 107 Construction of RCC OHSR (Over Head Service Reservoir) Capacity 200KL staging - 20.00 mtr at RWSS 10 BLM-A BI01010001010000000000000515BI0100001218
108 108 Construction of RCC INTZE type Head Service Reservoir of following capacity and staging consisting of excavation in all types of strata, RCC work, cement plaster with water proofing compound to the inner face of the container including refilling disposing off the surplus stuff, plinth protection , all labour and material charges including providing and fixing of accessories such as ladder , manhole frame and covers, water level indicator (float type), ventilator with SS screen, lightening arrestor, float valve, puddle collar, G.I. pipe railing around walk way and top dome, providing RCC staircase from 4.5 mtr height of ground level to top level, chambers for all valves, providing and applying three coats of cement paint to the external surfaces of container, column, bracing, carbonation paint on external surface of top dome, food grade epoxy paint on internal surface and giving satisfactory hydraulic test and water tightness test as per I.S. code, etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job includes conducting SBC test, design and proof check of reservoirs (if required),painting the name of the scheme and other details on the reservoir, providing alluminium portable ladder suitable to reach at height of 4.5 Mtr(start of RCC reservoir) and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work The rate indicated below are excluding the cost of pipes, specials and valve required for inlet, outlet, washout, overflow piping arrangement, but inclusive of DI puddle collar for inlet, outlet, overflow and washout pipe of appropriate sizes to be embedded in concrete. :- For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7 MT/sqm and less than 10 MT/sqm, for staging height of 20 M for seismic zone II. 200 KL capcity BI01010001010000000000000515BI0100001219 200000 Ltr.
109 109 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic\ntesting etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work.. 200mm BI01010001010000000000000515BI0100001220 45 RM
110 110 150mm BI01010001010000000000000515BI0100001221 75 RM
111 111 100mm BI01010001010000000000000515BI0100001222 30 RM
112 112 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable fordrinking water) coated with minimum thickness of 250 microns inside and\noutside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick.Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6, 200 mm dia BI01010001010000000000000515BI0100001223 2 Job
113 113 150 mm dia\n BI01010001010000000000000515BI0100001224 3 Job
114 114 100 mm dia BI01010001010000000000000515BI0100001225 1 Job
115 115 Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6, 200 mm dia. BI01010001010000000000000515BI0100001226 2 Each
116 116 Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6, 150 mm dia. BI01010001010000000000000515BI0100001227 3 Each
117 117 Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6, 100 mm dia. BI01010001010000000000000515BI0100001228 1 Each
118 118 Providing, lowering, laying, aligning, fixing in position and jointing at all level/ dept standard DI special with rubber ring (EPDM) nut bolt and insertion sheet and jointing as per IS 9523 : 2000 or as amended upto date, such as tees, band, tapers, caps etc. within trenches In DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specification and direction of engineering-in-charge (excluding Earth work). A/F tee, band, Reducer (All and Flanged) Upto 300 mm dia Mtr BI01010001010000000000000515BI0100001229 300 Kg
119 119 SITC of Bulk Flow Meter with removable mechanism class "B"\nconfirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. \nNote: Rates are exclusive of tail piece / dismantling joints and earth work. BFM 150 mm BI01010001010000000000000515BI0100001230 1 Each
120 120 BFM 200 mm BI01010001010000000000000515BI0100001231 1 Each
121 121 Construction of RGF 40 KLH BI01010001010000000000000515BI0100001232
122 122 Part -A Construction of RGF BI01010001010000000000000515BI0100001233
123 123 Design, construction, commissioning & testing of Non Mechanical Rapid Gravity Filter Plant of capacity as under (8 hrs working in a day). This work includes construction of RCC receiving chamber, baffle channel, floculator, clarifier, collecting channel, filter beds , operation gallery, clear water chamber, channel, chlorination chamber, pipe system for carrying raw water from Pump House to inlet of RGF, clear water from Plant to CWR, De-sludging system including providing pipe system from clarifier , floculator & back wash water chamber to existing storage tank, Back wash pump set with piping system, , air blower as per design, interconnection of raw water, clear water, sludge pipes etc. including allied works such for construction ,commissioning of system as specified in tender documents at various water supply schemes . Up to 40 KLH capacity BI01010001010000000000000515BI0100001234 40 KLH
124 124 Part -B Dismantling of Existing SSF's BI01010001010000000000000515BI0100001235
125 125 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. BI01010001010000000000000515BI0100001236 135.6 Cum
126 126 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. : 1:3:6 or reacher mix. BI01010001010000000000000515BI0100001237 52.25 Cum
127 127 Rejuvenation of CWR 100 KL& 50 KL at RWSS 10 BLM-A BI01010001010000000000000515BI0100001238
128 128 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. BI01010001010000000000000515BI0100001239 11 Cum
129 129 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge BI01010001010000000000000515BI0100001240 100 Sqm
130 130 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils BI01010001010000000000000515BI0100001241 25 Cum
131 131 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). BI01010001010000000000000515BI0100001242 4.5 Cum
132 132 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). BI01010001010000000000000515BI0100001243 4.5 Cum
133 133 Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix. BI01010001010000000000000515BI0100001244 9.5 Cum
134 134 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.\nM20 grade Nominal Mix / Design Mix Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix. BI01010001010000000000000515BI0100001245 9 Cum
135 135 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Arches, arch ribs, domes, vaults, shells, folded plate, chimneys, shafts , roofs having slope more than 15º ,vertical and horizontal fins individually or forming box louvers, facias and eaves boards\nM20 grade Nominal Mix / Design Mix Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix. BI01010001010000000000000515BI0100001246 7.3 Cum
136 136 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) BI01010001010000000000000515BI0100001247 2000 Kg.
137 137 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. BI01010001010000000000000515BI0100001248 15 Sqm
138 138 -----do--------- Walls (any thickness) including attached pilasters, buttresses plinth and string course. BI01010001010000000000000515BI0100001249 120 Sqm
139 139 -----do--------- Arches, domes, vaults etc. up to 6 Mtr span. BI01010001010000000000000515BI0100001250 75 Sqm
140 140 Add extra for shuttering in circular work (in respective centering and shuttering items) Walls (any thickness) 20% of respective item BI01010001010000000000000515BI0100001251 120 Sqm
141 141 Add extra for shuttering in circular work (in respective centering and shuttering items) Arches, domes, vaults etc. up to 6 Mtr span. 20% of respective item BI01010001010000000000000515BI0100001252 75 Sqm
142 142 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: BI01010001010000000000000515BI0100001253 180 Kg.
143 143 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and\n1.4 mm aperture on both sides BI01010001010000000000000515BI0100001254 2 Sqm
144 144 Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. Welded mesh 50 mmx 50 mm x 2.1 mm BI01010001010000000000000515BI0100001255 2 Sqm
145 145 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : \nTwo or more coats on new work BI01010001010000000000000515BI0100001256 4 Sqm
146 146 Finishing walls with water proofing cement paint of required shade including all scaffolding. : New work (Two or more coats applied @ 3.84 kg/10 sqm). BI01010001010000000000000515BI0100001257 80 Sqm
147 147 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete BI01010001010000000000000515BI0100001258 75 Sqm
148 148 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . BI01010001010000000000000515BI0100001259 70 Sqm
149 149 Providing, Laying, Jointing, Commissioning and Testing of uPVC Pipes confirming to IS 4985: 2000 (amended up to date) of Class- 3 in assorted length with uPVC specials. This includes supply of pipes, jointing material, uPVC specials and any other material required for laying of pipes including carting to site and laying of pipes in trenches then jointing with Jointing material/ Rubber Rings. This includes uPVC Special like tees, bends, reducer, enlarger, end plug cutting of pipes and making of joints etc. and testing of system, cleaning of site complete job. (Rates are Exclusive of Earth Work and WBM/ Chap/ Cement Concrete/ Bituminious Road cutting, CI Sluice Valve/ CI Specials for interconnection with other pipes, if required and including interconnection with existing pipe line, if required)- Pipes Nominal Dia. (mm) 225 mm Class 3 BI01010001010000000000000515BI0100001260 30 RM
150 150 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. In all type of soil For dia of pipe above 150 mm and up to 350 mm nominal.\n BI01010001010000000000000515BI0100001261 30 Mtr
151 151 Providing and fixing in position CI Puddle collar (approx. 1m length) inside the wall including all material labour as per Technical Specification of concerned IS Code 210-1978 (IS 1538:1993) and as per direction of Engineer:- 200 mm dia BI01010001010000000000000515BI0100001262 3 Each
152 152 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable fordrinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick.Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6, 200 mm dia BI01010001010000000000000515BI0100001263 1 Each
153 153 SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU), Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge. Note: Rates are exclusive of tail piece / dismantling joints and earth work. EFM 200 mm BI01010001010000000000000515BI0100001264 1 Each
154 154 Rejuvenation of Existing Pump House at RWSS 10 BLM-A BI01010001010000000000000515BI0100001265
155 155 Part- "A"- Civil Works BI01010001010000000000000515BI0100001266
156 156 Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 6 (1 cement : 6 coarse sand) BI01010001010000000000000515BI0100001267 20 Cum
157 157 Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) BI01010001010000000000000515BI0100001268 27.7 Cum
158 158 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.\nM20 grade Nominal Mix / Design Mix BI01010001010000000000000515BI0100001269 12.5 Cum
159 159 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) BI01010001010000000000000515BI0100001270 1460 Kg.
160 160 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. BI01010001010000000000000515BI0100001271 84 Sqm
161 161 Providing, hoisting and fixing up to floor five level precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia Mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand ) etc complete as per approved design excluding plastering of jambs, sills and soffits :40 mm thick. BI01010001010000000000000515BI0100001272 0.5 Sqm
162 162 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. BI01010001010000000000000515BI0100001273 61 Kg.
163 163 Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint Double leaf BI01010001010000000000000515BI0100001274 4.5 Sqm
164 164 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung /Ventilators top or centre hung (openable) BI01010001010000000000000515BI0100001275 6.5 Sqm
165 165 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides BI01010001010000000000000515BI0100001276 6.5 Sqm
166 166 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. BI01010001010000000000000515BI0100001277 40 Kg.
167 167 Providing and laying Common burnt clay brick tiles of class designation 100 over roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand ) and finished neat . BI01010001010000000000000515BI0100001278 42 Sqm
168 168 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. BI01010001010000000000000515BI0100001279 18 Cum
169 169 Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 901 to 2000 Sq.Cm : BI01010001010000000000000515BI0100001280 41 Sqm
170 170 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : : 12 mm BI01010001010000000000000515BI0100001281 280 Sqm
171 171 Finishing walls with water proofing cement paint of required shade including all scaffolding. : New work (Two or more coats applied @ 3.84 kg/10 sqm). BI01010001010000000000000515BI0100001282 150 Sqm
172 172 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. BI01010001010000000000000515BI0100001283 180 Sqm
173 173 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : \nNew work (two or more coats) including a coat of approved steel primer BI01010001010000000000000515BI0100001284 25 Sqm
174 174 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone 25 to 30mm thick. BI01010001010000000000000515BI0100001285 4 Sqm
175 175 Dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: BI01010001010000000000000515BI0100001286 4.95 Cum
176 176 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. : 1:4:8 or leaner mix. BI01010001010000000000000515BI0100001287 2 Cum
177 177 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. : 1:3:6 or reacher mix. BI01010001010000000000000515BI0100001288 1 Cum
178 178 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.\n(External work). 15 mm nominal outer dia pipes BI01010001010000000000000515BI0100001289 20 mtr.
179 179 Making connection of G.I. distribution branch with G.I. main including all fitting. Up to 25 mm dia. BI01010001010000000000000515BI0100001290 1 Each
180 180 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15 mm nominal bore. BI01010001010000000000000515BI0100001291 6 Nos.
181 181 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. Type B 110 mm diameter BI01010001010000000000000515BI0100001292 9 Mtr
182 182 P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including placing on terrace( at all floors),making connection etc. complete of approved design. Details of cost for 500 litre BI01010001010000000000000515BI0100001293 500 Ltr.
183 183 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. .In Cement mortar. BI01010001010000000000000515BI0100001294 19 Cum
184 184 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 meters (stacks of cleaned bricks shall be measured): From brick work in cement mortar. BI01010001010000000000000515BI0100001295 9000 Nos
185 185 Recovery of useable old brick BI01010001010000000000000515BI0100001296 9000 Nos
186 186 Part- "B"- Electrical Works BI01010001010000000000000515BI0100001297
187 187 Wiring of light point/ fan point / exhaust fan point/ call bell point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible earth copper conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 Short point ( up to 3 mtrr.) BI01010001010000000000000515BI0100001298 4 P. point
188 188 Medium point ( up to 6 mtrr.) BI01010001010000000000000515BI0100001299 9 P. point
189 189 Long point ( up to103 mtrr.) BI01010001010000000000000515BI0100001300 2 P. point
190 190 Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq.mm FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit and its accessories , 18 SWG M.S. Box with earthing terminal, 6 A socket 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections testing etc; as required - G-1 On boartd BI01010001010000000000000515BI0100001301 2 P. point
191 191 S&F following sizes (dia) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. Group-1 25 mm BI01010001010000000000000515BI0100001302 10 R. mtr.
192 192 Supplying and drawing RC PVC insulated & unsheathed flexible copper conductor ISI marked ( IS:694) of 1.1 KV grade and approved make in existing surface of recessed conduit/casing capping including making connections etc. as required. Group-1 2 x 1.5 sq. mm BI01010001010000000000000515BI0100001303 5 Mtr
193 193 2 x 2.5 sq. mm BI01010001010000000000000515BI0100001304 5 Mtr
194 194 Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175x100x60 mm on surface or in recessed with suitable size phenolic larninated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet making connection, testing etc as required BI01010001010000000000000515BI0100001305 2 Each
195 195 P & F 240/415 V MCB of breaking capacity not less than 10 KV ( B/C/D tripping characteristic) ISI marked IS:8828 (1998)/conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. Group-1 6 A to 32 A rating BI01010001010000000000000515BI0100001306 3 Each
196 196 P & F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board/ sheet including making connections with lugs, testing etc. as required Group-1 30 A/ 40 A rating BI01010001010000000000000515BI0100001307 1 Each
197 197 P & F Recessed/Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link, neutral link, earth link and din bar, conforming to IS 13032 & IS8623 including making internal DB terminatyions with coppper lugs, testing etc; as required 6 Way BI01010001010000000000000515BI0100001308 1 Each
198 198 P & F ISI marked ( IS:3854) 6 amp flush type switch including cutting hole in tile and making connection testing etc. as required Group-1 BI01010001010000000000000515BI0100001309 2 Each
199 199 P & F ISI marked ( IS:3854) 16 amp flush type switch including cutting hole in tile and making connection testing etc. as required Group-1 BI01010001010000000000000515BI0100001310 2 Each
200 200 P & F ISI marked ( IS:1293) 3 pin 6 amp. Flush type socket including cutting hole in tile and making connection testing etc. as required. Group-1 BI01010001010000000000000515BI0100001311 2 Each
201 201 P & F ISI marked ( IS:1293) 3/6 pin 16 amp. Flush type socket including cutting hole in tile and making connection testing etc. as required. Group-1 BI01010001010000000000000515BI0100001312 2 Each
202 202 P & F ISI marked 6 amp bakelite betten/angle holder including making connection testing etc. as required. Group-1 BI01010001010000000000000515BI0100001313 5 Each
203 203 P & F ISI marked flush type 120/280 watt rotary step fan regulator including making connection testing etc. as required. BI01010001010000000000000515BI0100001314 4 Each
204 204 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and brick masonary finished chamber covered with ferro cement cover CI frame of size 300 mm x 300 mm complete with alternate layers of sals charcol / coke, testing of earth resistance as rquired. BI01010001010000000000000515BI0100001315 1 Each
205 205 S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 10 SWG copper Wire. BI01010001010000000000000515BI0100001316 5 Mtr.
206 206 P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . BI01010001010000000000000515BI0100001317 4 Each
207 207 P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. 1200 mm Sweep 5 Star rated BI01010001010000000000000515BI0100001318 4 Each
208 208 P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. 300 mm sweep BI01010001010000000000000515BI0100001319 1 Each
209 209 P & F ISI marked 6 amp surface type ceiling rose Including making connection testing etc. as required. Group-1 BI01010001010000000000000515BI0100001320 10 Each
210 210 P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). 1 X 36 Watts with OCCB BI01010001010000000000000515BI0100001321 5 Each
211 211 P & F Flucrscent tube rod in existing fixtures as required. Group-1 36/40 Watts BI01010001010000000000000515BI0100001322 5 Each
212 212 Wiring for sub mains ISI marked ( IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWS G.I. Support wire duty clipped etc. as required. Group-1 4.0 sq. mm BI01010001010000000000000515BI0100001323 10 Mtr.
213 213 P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with Heat dissipation fins on housing with High Power LEDs of CREE / NICHIA / OSRAM / PHILIPS make. DIffuser / Glass cover for ensuring IP65 protection for Lamp & control gear compartment, System Lumen output of 1500 - 8500 High Power LED. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Fixture shall be in CE Compliance. IP - 65 Protected LED Street Light Luminaire. Group-1 (Wipro, Lighting Science, Bajaj) LED Street Light fixture 20-25 Watt BI01010001010000000000000515BI0100001324 2 Each
214 214 S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 32 mm Dia. BI01010001010000000000000515BI0100001325 1 Mtr.
215 215 Provision for Providing , laying, jointing , testing and commissoning of distribution pipe line at RWSS 10 BLM-A BI01010001010000000000000515BI0100001326
216 216 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. HDPE PE-80 PN-6 90 mm dia \n BI01010001010000000000000515BI0100001327 5645 Mtr
217 217 110 mm dia BI01010001010000000000000515BI0100001328 1575 Mtr
218 218 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6/12 M. HDPE PE-80 PN-6: 125 mm dia BI01010001010000000000000515BI0100001329 830 Mtr
219 219 140 mm dia BI01010001010000000000000515BI0100001330 342 Mtr
220 220 160 mm dia BI01010001010000000000000515BI0100001331 24 Mtr
221 221 180 mm dia BI01010001010000000000000515BI0100001332 132 Mtr
222 222 200 mm dia BI01010001010000000000000515BI0100001333 20 Mtr
223 223 Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. In all type of soil For HDPE pipe line dia up to 110 mm BI01010001010000000000000515BI0100001334 7220 RMT
224 224 Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. In all type of soil For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. BI01010001010000000000000515BI0100001335 1172 RMT
225 225 Earth work in excavation by mechanical means (Hydraulic Excavator )/manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. In all type of soil For dia of pipe up to 150 mm nominal, For dia of pipe above 150 mm and up to 350 mm nominal.\n BI01010001010000000000000515BI0100001336 176 RMT
226 226 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN1171/AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable fordrinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick.Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6, 80 mm dia BI01010001010000000000000515BI0100001337 4 Each
227 227 100 mm dia BI01010001010000000000000515BI0100001338 2 Each
228 228 125 mm dia BI01010001010000000000000515BI0100001339 1 Each
229 229 150 mm dia BI01010001010000000000000515BI0100001340 1 Each
230 230 200 mm dia BI01010001010000000000000515BI0100001341 1 Each
231 231 Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). Flange Socket, Spigot, Hy. Tee. Upto 300 mm Diameter BI01010001010000000000000515BI0100001342 480 Kg
232 232 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. BI01010001010000000000000515BI0100001343 5 cum
233 233 Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. Bituminous courses\n BI01010001010000000000000515BI0100001344 50 cum
234 234 Granular courses\n BI01010001010000000000000515BI0100001345 50 cum
235 235 Removing & Re-fixing of Precast concrete interlocking blocks by manual, stacking of severciable & un serviceable material separately. disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of minimum 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block, all lead and lift as per general specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness:\nLess than 3.2 mm) 60 mm thick BI01010001010000000000000515BI0100001346 50 Sqm
236 236 80 mm thick BI01010001010000000000000515BI0100001347 50 Sqm
237 237 Providing of all size CI Plane Ended Special like Tees, Bends, Reducers, Enlargers, Plugs and Tail Pieces as per IS: 5531- 1988 (amended up to date- For CI Plane Ended Specials)requiring for laying, testing and commissioning of AC Pipe line as per Technical Specifications and as per direction of Engineer. BI01010001010000000000000515BI0100001348 450 Kg
238 238 Providing of all size CI Flanged Special like Tees, Bends, Reducers and Enlargers as per IS: 1538-1993 (amended up to date) requiring for laying, testing and commissioning of AC Pipe line as per Technical Specifications and as per direction of Engineer. BI01010001010000000000000515BI0100001349 250 Kg
239 239 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-incharge. MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) BI01010001010000000000000515BI0100001350 200 Kg
240 240 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS:6418 or screwed type shall have external pipe threads conforming to IS:554, Fasteners - CS. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge. Note: Rates are exclusive of connecting tee, pipe piece and earth work. Class PN 1.0, 25 mm S-1 Type BI01010001010000000000000515BI0100001351 1 Each
241 241 Part 'B' Sluice Valve Chamber BI01010001010000000000000515BI0100001352
242 242 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils BI01010001010000000000000515BI0100001353 15 Cum
243 243 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001354 1.5 Cum
244 244 Brick work with common burnt clay F.P.S.(Non Modular) bricks of class designation 7.5 in foundation and plinth with Cement mortar 1 : 4 (1 cement : 4 coarse sand) BI01010001010000000000000515BI0100001355 5 Cum
245 245 Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20 mm thick. BI01010001010000000000000515BI0100001356 50 Sqm
246 246 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix \n1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (without vibrator) BI01010001010000000000000515BI0100001357 1 Cum
247 247 House Hold Tap Connections for RWSS 10 BLM-A BI01010001010000000000000515BI0100001358
248 248 Providing service connection as per technical specification and standard drawing as per relevant IS code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS/PVC clamp with saddle piece, gunmetal ferrule 4.0 mm (ISI make) , valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427 below ground level and GI 15 mm class B 1.19.1 Average length up to 05 mtr 20 mm dia MDPE pipe/ 15 mm 1.19.2 House hold tap connections (ISI mark) above ground level ( max. length 3.0 mtr), P&F a Bib Cock (IS : 8931 Mark), Superior quality Brass 400 gm,15 mm nominal bore including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bituminous roads where minimum depth shall be 20 cm. For detailed specifications of MDPE pipes please refer section "Technical specifications" of bid document. General specifications of MDPE pipes shall be as under: • The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum equired strength of 8 Kg/sq.cm. • The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar. • The pipes shall bear ISO marking. Average length up to 05 mtr 20 mm dia MDPE pipe/ 15 mm GI Class B Pipe BI01010001010000000000000515BI0100001359 471 FHTC
249 249 Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar no./ration card/voter ID/BPL card/ PAN card/driving licence/passport/Antyodaya card/mobile no. etc. and entering the details on the above website. The cost also includes computer and operator. BI01010001010000000000000515BI0100001360 471 FHTC
250 250 Provision for Operation and Maintenance of Water Supply Scheme at RWSS 10 BLM-A BI01010001010000000000000515BI0100001361
251 251 Operation and maintenance of pumping machinery including repairing of pump sets, electric panel, suction and delivery system up to pumping main complete in all respect (If pump sets have been supplied & installed by the contractor) For 1st year (Only operation) BI01010001010000000000000515BI0100001362 1 Year
252 252 Operation and maintenance of water supply schemes. This includes operation of pump sets, repairing of pipe line, patrolling of raw water conveyance system to fill raw water storage tanks, O&M of filter plant to maintain water supply, periodical cleaning of Head works and allied units. (Repairing of pump sets panels etc will be carried out by department and material for maintenance of pipe line will be provided by department) When 4 persons are required for O&M of scheme. BI01010001010000000000000515BI0100001363 48 Month
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail