Rate Contract For Civil Work Items Only For Kashmir Province For The Year 21-22 “Sicop”. E-Tender Notice No: 41-Sicop ( Gmm ) Of 2020 Dated: 23.09.2020-1 Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Cables Etc. ( Not Exceeding 1.5 Mtr.In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Depth Up To 1.50 Mtr. Incl. Disposed Earth Is To Be Leveled And Neatly Dressed In All Kinds Of Soil. 2 Supply And Filling Of Earth In Layers Not Exceeding 20 Cm In Depth, Rolling Each Layer With Power Road Roller Of 8-10 Tonnes, Incl Dressing, Watering, Leveling And All Carriages Up To Site Of Work Complete. N 3 Filling Available Excavated Earth ( Excl. Rock ) In Trenches, Plinth, Sides Of Foundation Etc. Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering Lead Up To 50 M And Lift Up To 50 M. 4 Providing & Laying Stone Soling ( Hand Packed ) Incl. Ramming, Watering, And All Carriages Up To Site Of Work Complete. 5 Providing & Laying In Position Cement Concrete Of Specified Grade Excl. The Cost Of Centering & Shuttering. All Work Upto Plinth Level A ) 1:4:8 { 1 Cement: 4 Coarse Sand: 8 Graded Crushed Stone Agg. 40Mm Nominal Size N 6 B ) 1:3:6 { 1 Cement: 3 Coarse Sand: 6 Graded Crushed Stone Agg. 40Mm Nominal Size 7 C ) 1:2:4 { 1 Cement: 2 Coarse Sand: 4 Graded Crushed Stone Agg. 20Mm Nominal Size N 8 Providing & Laying In Position Specified Grade Of Reinforcement Concrete Excl. The Cost Of Centering & Shuttering , Finishing And Reinforcement. All Work Upto Plinth Level N A ) 1:2:4 { 1 Cement: 2 Coarse Sand: 4 Graded Crushed Stone Agg. 20Mm Nominal Size N 9 B ) 1:1.5:3 { 1 Cement: 1.5 Coarse Sand: 3 Graded Crushed Stone Agg. 20Mm Nominal Size 10 Reinforcement Cement Concrete Work In Walls ( Any Thickness ) , Incl. Attached Pilasters, Buttresses, Plinth And String Course, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts, Etc. Up To Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement. A ) 1:2:4 { 1 Cement: 2 Coarse Sand: 4 Graded Crushed Stone Agg. 20Mm Nominal Size 11 B ) 1:1.5:3 { 1 Cement: 1.5 Coarse Sand: 3 Graded Crushed Stone Agg. 20Mm Nominal Size 12 Providing & Laying In Position Cement Concrete Of Specified Grade Excl. The Cost Of Centering & Shuttering. All Work Upto Plinth Level. ( Plum Concrete Using 20 % Plums ) 1:3:6 { 1 Cement:3 Coarse Sand:6 Graded Crushed Stone Agg. 40Mm Nominal Size Incl.All Carriages Complete. 13 B ) P / F Up To Floor-5 Level Precast Cement Concrete Hallow Blochs Including Hoisting And Setting In Position With Cement Morter 1:3 ( 1Cement:3Course Sand ) , Cost Of Required Centering And Shuttering Complete. 14 Reinforcement For R.C.C. Work Incl. Straightening, Cutting, Bending, Placing In Position & Binding All Complete Mild Steel & Medium Tensile Steel Bars. 15 Providing And Laying Damp Proof Course With Cement Concrete 1:2:4 ( 1 Cement : 2 Course Sand : 4 Graded Crushed Stone Aggregate 20 Mm Nominal Size ) Na ) 50 Mm Thick N 16 B ) 40 Mm Thick 17 Centering & Shuttering Including Strutting, Propping, Etc. & Removal Of Form Work For:- Na ) Foundations, Footings, Bases Of Columns Etc. For Mass Conc. N 18 B ) Walls ( Any Thickness ) Incl. Attached Pilasters, Buttresses, Plinth And String Courses Etc. 19 C ) Suspended Floors, Roofs, Landings, Balconies And Access Platform. 20 D ) Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. 21 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 { 1 Cement:34 Coarse Sand:6 Graded Stone Agg. 20Mm Nominal Size ) Over 75 Mm Bed Ofdry Brick Ballast 40 Mm Nominal Size Well Rammed, Consolidated And Grouted With Fine Sand Including Finishing The Top Smooth. 22 Brick Work With F.P.S. Bricks Of Class Designation 75 In Super Structure Above Plinth Level Up To Floor Five Level ( By Manual Means ) In Cement Mortar 1:6 ( 1 Cement: 6 Coarse Sand ) 23 Brick Work With F.P.S. Bricks Of Class Designation 75 In Super Structure Above Plinth Level Up To Floor Five Level ( By Manual Means ) In Cement Mortar 1:6 ( 1 Cement: 6 Coarse Sand ) Nb ) Labour Only Bricks Available At Site.Incl. All Carriages Up To Site Of Work Complete. N 24 C ) Half Brick Masonry In Cement Mortar 1:4 ( 1 Cement : 4 Course Sand ) With Bricks Of Class Designation 75 In Super Structure Above Plinth Level Up To Floor V Level 25 Random Rubble Masonry In Cement Mortar 1:6 ( 1 Cement:6 Course Sand ) With Hard Stone From Quarry In Foundation And Plinth Including Leveling Up With Cement Concrete 1:6:12 { 1 Cement:6 Coarse Sand:12 Graded Stone Agg. 20Mm Nominal Size At Plinth Level 26 B ) Dry Random Rubble Masonry In Foundation And Plinth Using Quarry Stone With Bond Stone. 27 Providing And Laying ( Fine Chissel Dressed ) . Devri Stones Up To Floor Five Level In Cement Mortar 1:6 ( 1 Cement:6 Course Sand ) Incl. Pointing With White Cement Mortar 1:2 ( 1White Cement:2 Stone Dust ) With An Admixture Of Pigment Matching The Stone Shade , Incl. All Carriages Up To Site Of Work Complete 28 Cornice Of Desired Design And Size. 29 Marble Work Gang Saw Cut ( Polished And Machine Cut ) For Wall Lining ( Veneer Work ) In Cement Mortar 1:3 ( 1Cement:3 Course Sand ) Incl. Pointing With White Cement Mortar 1:2 ( 1 White Cement:2 Marble Dust ) With An Admixture Of Pigment To Match The Marble Shade : ( To Be Secured To The Backing By Means Of Cramps, Which Shall Be Paid For Separately ) Raj Nagar Plain White Marble / Udhaypuri Green Marble / Zebra Black Marble Na ) Area Of Slab Up To 0.50 Sqm. 18 Mm Thick. N 30 B ) Area Of Slab Over 0.50 Sqm. 18 Mm Thick. 31 Providing And Fixing Gang Saw Cut Granite Work Mirror Polished ( Pre Moulded And Pre Polished ) , Machine Cut For Kitchen Platform, Vanity Counters, Window Sills, Facias And Similar Locations Of Reqd. Size And Approved Shade, Color And Texture Laid Over 20 Mm Thick Base Cement Mortar 1: 4 ( 1Ccement:4 Course Sand ) With Joints Treated With White Cement, Mixed With Maching Pigment, Epoxy Touch Ups, Incl. Rubbing, Curing, Moulding And Polishing To Edge To Give High Gloss Finish Etc. Complete At All Levels Nraj Nagar Plain White Marble / Udhaypuri Green Marble / Zebra Black Marble Na ) Area Of Slab Up To 0.50 Sqm 18 Mm Thick. N 32 B ) Area Of Slab Over 0.50 Sqm ) 18 Mm Thick 33 Extra For Providing Edge Moldings To 18 Mm Thick Marble Stone Counters, Vanities Etc. Over Above Items Incl. Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Na ) Marble Work. Nb ) Granite Work. N 34 Mirror Polishing On Marble Work Where Ever Required To Give High Gloss Finish Complete. 35 Cement Concrete Flooring 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Agg. 20Mm Nominal Size -Crushed ) Finished With A Floating Coat Of Neat Cement Incl. Cement Slurry, But Excl. The Cost Of Nosing Of Steps Etc. Complete Na ) 50Mm Thick. Crushed. N 36 B ) 40Mm Thick Crushed. 37 Providing And Laying Vitrified Floor Tiles Of Size 60 X 60Cm ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In All Colours And Shades, Laid On 12 Mm Thick Chemical Of Standard Manufacture Including Grouting The Joints With White Cement And Matching Pigments And All Carriages Complete. 38 Chequered Terrazzo Tiles 22Mm Thick With Graded Marble Clip Of Size Up To 6Mm In Floors Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Incld. Rubbing Polishing Curing Complete On 20Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 38.01 A ) Light Shade Using White Cement ( Sqm ) 38.02 B ) Medium Shade Using 50 / White Cement & 50 / Ordinary Cement ( Sqm ) 38.03 C ) Dark Shade Using Ordinary Cement ( Sqm ) 38.04 D ) Ordinary Cement Without Any Pigment ( Sqm ) 39 02 Chequered Terrazzo Tiles 30Mm Thick With Graded Marble Clip Of Size Up To 6Mm In Floors Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Incld. Rubbing Polishing Curing Complete On 20Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 39.01 A ) Light Shade Using White Cement ( Sqm ) 39.02 B ) Medium Shade Using 50 / White Cement & 50 / Ordinary Cement ( Sqm ) 39.03 C ) Dark Shade Using Ordinary Cement ( Sqm ) 39.04 D ) Ordinary Cement Without Any Pigment ( Sqm ) 40 03 Chequered Precast Cement Concrete Tiles 22Mm Thick In Foot Path & Courtyard Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Incld. Rubbing Polishing Curing Complete On 20Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 40.01 A ) Light Shade Using White Cement ( Sqm ) 40.02 B ) Medium Shade Using 50 / White Cement & 50 / Ordinary Cement ( Sqm ) 40.03 C ) Dark Shade Using Ordinary Cement ( Sqm ) 40.04 D ) Ordinary Cement Without Any Pigment ( Sqm ) 41 04 Demolishing Brickwork Manually / By Mechanical Means Incl. Staking Of Serviceable Material & Disposal Of Unserviceable Material Within 50Mtr. Of Led As Per Direction Of Engineer Incharge. 41.01 A ) In Cement Mortar ( Cum ) 41.02 B ) In Line Motor 42 05 Kota Stone Flooring 25Mm Thick Over 20Mm Cavg ) Thick Base Laid Over &Poited With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Incl.Rubbing Polishing & Curing Complete With Base Of Cement Mortar 1:4 ( 1 Cement:4 Coarse Sand ) . 43 12Mm Cement Plaster Of Mix 43.01 A ) 1:4 ( 1 Cement :4 Fine Sand ) 43.02 B ) 1:6 ( 1Cemnt :6 Fine Sand 44 Providing & Fixing Ist Quality Ceramic Glazed Wall Tiles Confirming To Is: 13753 Of Minimum Thickness 5Mm Of Approved Make Like Nitco, Orient, Somany, Kajaria Or Equivalent Make In All Color Shades Of Any Size As Approved By The Engineer In Charge In Walls, Dados Etc Over 12Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) & Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Incl. Pointing In White-Cement Mixed With Pigment Of Matching Shade Complete. ( 600Mmx300mm ) 45 Providing And Fixing Ceramic Glazed Floor Tiles 300X300mm Thickness To Be Specified By Manufactures ) Of Ist Quality Conforming Of Is: 13755 Of Nitco, Orient, Somany Kajaria, Or Equivalent Make In Colour Such As White, Ivory, Grey, Fume Red Brown Laid On 20Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Including Pointing The Joints With White Cement And Matching Pigment Etc Compete. 46 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix. Na ) 1 : 4 ( 1 Cement : 4 Course Sand ) N 47 B ) 1 : 6 ( 1 Cement : 6 Course Sand ) 48 Rough Cast Plaster Up To 10 M Height Above Ground Level With A Mixture Of Sand And Gravel Or Crushed Stone From 6 Mm To 10 Mm Nominal Size Dashed Over And Incl. The Fresh Plaster In Two Layers, Under Layer 12 Mm Cement Plaster 1:4 ( 1 Cement:4 Course Sand ) And Top Layer 10 Mm Cement Plaster 1:3 ( 1 Cement:3 Fine Sand ) Mixed With 10% Finely Grounded Hydrated Lime By Volume Of Cement ( Ordinary Cement Finish Using Ordinary Cement ) 49 Providing And Applying Plaster Of Paris Putty Of 2Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 50 Pointing On Brick Work With Cement Mortar 1:3 ( 1 Cement:3 Fine Sand ) . Na ) Flush Pointing N 51 B ) Ruled Pointing 52 C ) Raised And Cut Pointing 53 Pointing On Stone Work With Cement Mortar 1:3 ( 1 Cement:3 Fine Sand ) . Na ) Flush Pointing N 54 B ) Ruled Pointing 55 C ) Raised And Cut Pointing 56 White Washing With Lime To Give An Even Shade. New Work Na ) ( Three Or More Coats ) N 57 B ) Satna Lime Wash On Walls ( One Coat ) 58 Distempering With Dry Distemper Of Approved Brand And Manufacture ( Two Or More Coats ) And Of Reqd. Shade On New Work, Over And Incl. Priming Coat Of Whiting To Give An Even Shade 59 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade. Nnew Work ( Two Or More Coats ) Over And Incl. Priming Coat With Cement Primer. N 60 Distempering With Ist. Quality Acrylic Washable Distemper ( Ready Made ) Of Approved Manufacture And Of Reqd. Shade / Colour Complete As Per Manufacturer’S Specifications. Na ) Two Or More Coats On New Work. N 61 B ) One Or More Coats On Old Work. 62 Applying One Coat Of Water Thinable Cement Primer Of Approved Brand And Manufacture On Wall Surfaces. Cement Primer. 63 Finishing Walls With Water Proofing Cement Paint Of Approved Brand And Manufacture And Of Reqd. Shade To Give An Even Shade. A ) New Work ( Two Or More Coats ) Applied @ 3.84 Kgs / 10 Sqm. 64 B ) Old Work ( One Or More Coats ) Applied @ 2.20 Kgs / 10 Sqm Over Priming Coat Of Primer Applied @ .080 Liters / 10 Sqm Complete Incl. Cost Of Priming Coat. 65 Applying Priming Coats :- 66 A ) With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work ( Hard And Soft Wood ) . 67 B ) With Ready Mixed Aluminum Primer Of Approved Brand And Manufacture On Resinous Wood And Ply Wood 68 C ) With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanized Iron / Steel Works. 69 Painting With Ready Mixed Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shades To Give An Even Shade. Na ) New Steel Work ( Two Or More Coats ) N 70 B ) Old Steel Work ( One Or More Coats ) 71 Finishing With Epoxy Paint ( Two Or More Coats ) At All Locations Prepared And Applied As Per Manufacturer’S Specifications Incl. Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. A ) On Steel Work. 72 B ) On Concrete Work. 73 Finishing Walls With Textured Exterior Paint Of Required Shade On New Work ( Two Or More Coats Applied @ 3.28 Litre / 10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg / 10 Sqm ) 74 Painting On G.S Sheets With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Reqd. Color To Give An Even Shade. New Work ( Two Or More Coats ) Incl. A Coat Of Approved Steel Primer But Excl. A Coat Of Mordant Solution. 75 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work. 76 Painting With Almunium Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work. 77 Floor Painting With Floor Enamel Paint Of Approved Brand And Manufacture Of Reqd. Colour To Give An Even Shade Two Or More Coats On New Work. 78 Melamine Polishing On Wood Work ( One Or More Coats ) 79 Floor Polishing On Masonry Or Concrete Floors With Wax Polish Of The Approved Brand And Manufacture. 80 Varnishing With Flatting Varnish Of Approved Brand And Manufacture One Or More Coats On Old Work. 81 Repairs To Plaster With Cement Mortar 1:4 ( 1 Cement: 4 Course Sand ) Of Thickness 12 Mm In Patches Of Area 2.5 Sqm. And Under Incl. Cutting The Patch In Proper Shape And Preparing And Plastering The Surface Of The Walls Complete Incl. Disposal Of The Dumping Ground Within 50 Mts. Lead. 82 Renewing Glass Panes, With Putty And Nails Wherever Necessary.A ) Float Glass Panes Of Thickness 4 Mm 83 B ) Float Glass Panes Of Thickness 5.5 Mm 84 Renewing Glass Panes, With Wooden Fillets Wherever Necessary.A ) Glass Panes Weighing 10 Kg / Sqm 85 B ) Glass Panes Weighing 13.75 Kg / Sqm 86 Racking Out Joints In Lime Or Cement Mortar And Preparing The Surface For Repainting Or Replastering Incl. Disposal Of Rubbish To The Dumping Ground Within 50 Mts. Lead 87 Taking Out Doors , Windows And Clerestory Windows ( Steel Or Wood ) Including Stacking Within 50 Metres Lead : Na ) Of Area Of 3 Sq. Metres And Below N 88 B ) Of Area Beyond 3 Sq. Metres 89 Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Upto 10 Meters Span And And 5 Meters Height Including Stacking The Material Within 50 Meters Lead. Nof Sectional Area 40 Sq. Centimetres And Above N 90 Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Meters Lead Of : Na ) G.S. Sheet Nb ) Asbestos Sheet N 91 Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking Within 50 Mts Lead. 92 Dismantling Steel Work Manually / By Mechanical Means In Built Up Sections Without Dismembering And Stacking Within 50 Mts Lead. 93 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Incl. Disposal Of Rubbish To The Dumping Ground Within 50 Mts. Lead 94 Preparation Of Sub Grade By Excavating Earth To An Average Of 22.5 Cm Depth , Dressing To Camber And Consolidation With Road Roller Including Making Good The Undulation Etc. And Disposal Of Surplus Earth Up To 50 Meters. 95 Supplying And Laying Water Bound Macadam With Specified Stone Aggregate Stone Screening And Binding Material Including Screening , Sorting , Spreading To Template And Consolidation With Power Road Roller Of 8 To 10 Tonne Capacity Etc. Complete ( Including Cost Of Stone Aggregate , Screenings , Kankar , Moorum And Red Bajri Etc. ) : Na ) Sub Base With Stone Aggregate 90 Mm To 45 Mm Including Stone Screenings 13.2Mm Size N 96 B ) Base Course With 63 Mm To 45 Mm Size Including Stone Screening 13.2 Mm Size 97 C ) Base Course With 53 Mm To 22.4 Mm Size Including Stone Screenings 11.2 Mm Size 98 Supplying And Stacking Of Good Earth At Site, Excluding Carriage. 99 Providing And Fixing G.I Chain Link Fabric Fencing Of Reqd. Width In Mesh Size 50 X 50 Mm Incl. Strengthening With 2 Mm Dia. Wire Or Nuts, Bolts And Washers As Reqd. Complete As Per Direction Of Engineer-In-Charge. ( Made Of G.I Wire Of Dia. 4 Mm ) 100 Providing And Fixing Of 50Mm Thick Pre-Cast Interlock Tile Flooring, Jointing With Dry Sand On Top And Cement Concrete M-15 Grade On Ends Including All Carriage Lead And Lifts Complete. 101 P / F Water Closet Squatting Pan ( Indian Type W.C Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level P.V.C Flushing Cistern Including Flush Pipe ( Of Approved Make ) Manually Controlled Device ( Handle Lever ) Confirming To Is:7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. Na ) Long Pan Pattern White Vitreous China W.C Pan Of Size 580 Mm. N 102 B ) Orissa Pattern White Vitreous China W.C Pan Of Size 580 X 440 Mm With Integral Type Foot Rests. 103 P / F White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430 X 260 X 350 Mm And 340 X 410 X 265 Mm Sizes Respectively With Automatic Flushing Cistern With C.I / M.S Brackets Standard Size Of G.I Flush Pipe And C.P Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required. N ( One Urinal Basin With 5 Liter P.V.C White Automatic Flushing Cistern Of Approved Quality. ) N 104 P / F White Vitreous China Pedestal For Wash Basin Completely Recessed At The Back For The Reception Of Pipes And Fittings. 105 P / F Salem Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink As Per I.S:13983 With C.I Brackets And Stainless Steel Plug 40 Mm Including Painting The Fitting And Brackets, Cutting And Making Good The Walls Wherever Required. Kitchen Sink With Drain Board.610 X 460 X 200 Mm 106 P / F White Vitreous China Pedestal Type ( European Type / Wash Down Type ) Water Closet Pan. 107 P / F 10 Litre Capacity White Colour P.V.C Low Level Flushing Cistern With Manually Controlled Device ( Handle Lever ) Confirming To I.S:7231, With All Fittings And Fixtures Complete. 108 P / F White Vitreous China Wash Basin Including Making All Connections But Excl. The Cost Of Fittings. Nflat Back Wash Basin Of Size 630 X 450 Mm N 109 P / F 600 X 450 Mm Bevelled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P Brass Screws And Washers Complete. 110 P / F 600 X 120 X 5 Mm Glass Shelf With Edges Round Of Supported On Anodized Aluminum Angle Frame With C.P Brass Brackets And Guard Rail Complete Fixed With 40 Mm Long Screws, Rawl Plugs, Etc. Complete. 111 P / F C.P Brass Toilet Paper Holder. 112 P / F G.I Pipe ( Concealed Work ) Including Painting With Anti-Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall. A ) 15 Mm Dia 113 B ) 20 Mm Dia. 114 P / F Gun Metal Gate Valve With C.I Wheel Of Approved Quality ( Screwed End ) 25 Mm Dia. 115 P / F Ball Valve ( C.P Brass ) Of Approved Quality Complete. Na ) 15 Mm Dia N 116 B ) 20 Mm Dia. 117 P / F Fallowing C.P Brass Fittings Of Approved Manufecture. 118 A ) 15 Mm Dia Bib Cock 119 B ) 15 Mm Dia Angle Valve 120 C ) 15 Mm Dia Wall Mixer 121 D ) 15 Mm Dia. Basin Mixer 122 E ) 15 Mm Dia Stop Cock 123 F ) Shower With Arm 124 G ) Soap Case 125 H ) 600 Mm Long Towel Rod 126 I ) Towel Ring
