Military Engineer Services-MES has published Addn Altn And Special Repair To Otm Accn At Corps Hq And Md Accn At Rms ( Ph-I Of Two Phs ) At Rangapahar Mil Stn. Submission Date for this Tender is 06-11-2021. Civil Work Tenders in RANGAPAHAR Nagaland. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 24-Jul-2021 | Date Corrigendum | Date | 11-08-2021 |
2 | 03-Aug-2021 | Date corrigendum 2 | Date | 24-08-2021 |
3 | 16-Aug-2021 | Date Corrigendum 3 | Date | 03-09-2021 |
4 | 27-Aug-2021 | Date corrigendum4 | Date | 13-09-2021 |
5 | 07-Sep-2021 | Date corrigendum5 | Date | 20-09-2021 |
6 | 14-Sep-2021 | Date corrigendum 6 | Date | 04-10-2021 |
7 | 25-Sep-2021 | CORRIGENDUM NO 7 | Date | 11-10-2021 |
8 | 04-Oct-2021 | Corrigendum No.8 | Date | 18-10-2021 |
9 | 12-Oct-2021 | date corrigendum9 | Date | 25-10-2021 |
10 | 18-Oct-2021 | date corrigendum 10 | Date | 30-10-2021 |
11 | 21-Oct-2021 | IP | Other | 30-10-2021 |
12 | 21-Oct-2021 | corrigendum 11 | BOQ | 30-10-2021 |
13 | 30-Oct-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-11-2021 |
Name of Work: ADDN/ALTN AND SPL REPAIR TO OTM ACCN AT CORPS HQ AND MD ACCN AT RMS (PH-I OF TWO PHS) AT RANGAPAHAR MIL STN | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | B/R Portion | ITEM NO-1 | ||
2 | 1.001 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete.\n(4.20 + 81.80)* | ITEM NO-1.001 | 86 | Cum |
3 | 1.002 | Demolition of RCC of any description and in any position not otherwise specifically provided.\n(0.74 + 5.8)* | ITEM NO-1.002 | 6.54 | Cum |
4 | 1.003 | Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level.\n(94 +106.45)* | ITEM NO-1.003 | 200.45 | Cum |
5 | 1.004 | Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading.\n(1368 + 9003.50)* | ITEM NO-1.004 | 10371.5 | Sqm |
6 | 1.005 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames).\n(41 + 979)* | ITEM NO-1.005 | 1020 | Each |
7 | 1.006 | Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames).\n(52+348)* | ITEM NO-1.006 | 400 | Each |
8 | 1.007 | Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position.\n(7 + 0)* | ITEM NO-1.007 | 7 | Cum |
9 | 1.008 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and subbish off the premises.\n(1334 + 8157)* | ITEM NO-1.008 | 9491 | Sqm |
10 | 1.009 | Dismantling wall and ceiling board fibre, insulation etc or insulation boards any thickness including cover fillets.\n(1173+3248)* | ITEM NO-1.009 | 4421 | Sqm |
11 | 1.01 | Taken up or down 15 mm dia steel tubing and connections and removing from site complete all as specified and directed.\n(973+2200)* | ITEM NO-1.01 | 3173 | RM |
12 | 1.011 | Taken up or down 20 mm dia steel tubing and connections and removing from site complete all as specified and directed.\n(164+660)* | ITEM NO-1.011 | 824 | RM |
13 | 1.012 | Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.\n(407+8905)* | ITEM NO-1.012 | 9312 | Sqm |
14 | 1.013 | Dismantling boarding of any description and fixed in any position fixed with nails or screws.\n(51 + 332)* | ITEM NO-1.013 | 383 | Sqm |
15 | 1.014 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing.\n(292 + 0)* | ITEM NO-1.014 | 292 | Sqm |
16 | 1.015 | Dismantling wrought iron or MS work of any description not otherwise described.\n(0.04 + 25)* | ITEM NO-1.015 | 25.04 | Qtl |
17 | 1.016 | Excavating in Trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation etc or for shafts,wells, cesspits, manholes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. \n(375 + 247)*\n | ITEM NO-1.016 | 622 | Cum |
18 | 1.017 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in trenches complete all as specified and as directed.\n(169 + 127)* | ITEM NO-1.017 | 296 | Cum |
19 | 1.018 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed.\n(196 + 252)* | ITEM NO-1.018 | 448 | Cum |
20 | 1.019 | M &L for PCC 1:4:8 (40mm graded aggregate) type D2 as in foundation complete all as specified and directed.\n(1.75 + 92.25)* | ITEM NO-1.019 | 94 | Cum |
21 | 1.02 | M & L for PCC (1:3:6) type C-2 using 40mm graded aggregate as in bed blocks complete all as specified and directed.\n(4 + 0)* | ITEM NO-1.02 | 4 | Cum |
22 | 1.021 | M & L for brick work with sub class 'B' brick full brick thick straight or curved on plan n. exc 6m mean radius in CM 1:6 complete all as specified and directed\n(39.00+101.00)* | ITEM NO-1.021 | 140 | Cum |
23 | 1.022 | Form work to sides and soffits of floor or roof beam, beam haunching, girders bressummers, lintles, cantilevers, shelves including supports overhangs etc also splays between floor and beams etc. complete\n(6 +0)* | ITEM NO-1.022 | 6 | Sqm |
24 | 1.023 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips \n(112 + 1110)* | ITEM NO-1.023 | 1222 | Kg |
25 | 1.024 | All as per Sr. Item No.1.023 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders\n(20 + 40)* | ITEM NO-1.024 | 60 | Kg |
26 | 1.025 | M & L for Reinforced cement concrete (Nominal mix) Type B1, 1:2:4 using 20mm graded stone agg as in lintel beams over 1.5m span etc\n(0.64 + 0)* | ITEM NO-1.025 | 0.64 | Cum |
27 | 1.026 | M & L for RCC type B1 1:2:4 (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like \n(0.74 + 0)* | ITEM NO-1.026 | 0.74 | Cum |
28 | 1.027 | M & L for Hardcore of broken stone or boulders of gauge n exc, 63 mm deposited spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface \n(26 + 73.8)* | ITEM NO-1.027 | 99.8 | Cum |
29 | 1.028 | S & F mild steel conforming to Fe-290 Gde-E-165 as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles \n(47 + 200)* | ITEM NO-1.028 | 247 | Kg |
30 | 1.029 | S&F mild steel conforming to Fe-410- W (Gde-E-250) quality A as in Post, joist, channel, angle or tee section fixed independently without connection plates.\n(2047 + 0)* | ITEM NO-1.029 | 2047 | Kg |
31 | 1.03 | S&F MS plate (Plain or chequred) channels, (ordinary and counter sunk) forming holes, with out any attachment Fe-410-W (Gde E - 250) Quality - B\n(83 + 501)* | ITEM NO-1.03 | 584 | Kg |
32 | 1.031 | M&L for rolled mild steel conforming to Fe 410-W (Gde-E 250) quality-A as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc\n(3690+2500)* | ITEM NO-1.031 | 6190 | Kg |
33 | 1.032 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint complete all as specified.\n(51 + 220)* | ITEM NO-1.032 | 271 | Sqm |
34 | 1.033 | M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide prime in any tint complete all as specified.\n(197 + 151)* | ITEM NO-1.033 | 348 | Sqm |
35 | 1.034 | M&L for preparation of old painted surfaces of Brick, Stone, Concrete, Asbestos Cement work of any description over 10 cm width or girth not otherwise described and applying one coat of Plastic emulsion paint in any tint complete all as specified.\n(1094 + 0)* | ITEM NO-1.034 | 1094 | Sqm |
36 | 1.035 | M & L for 100 mm thick cement concrete as in sub base type D-2, 1:4:8 (40mm graded stone aggregates) \n(23 + 0)* | ITEM NO-1.035 | 23 | Sqm |
37 | 1.036 | M & L for 40 mm thick cement concrete in floors type B-1, 1:2:4 (20mm graded stone aggregates) finished even and smooth without usinf extra cement.\n(23 + 0)* | ITEM NO-1.036 | 23 | Sqm |
38 | 1.037 | Material and labour for vitrified ceramic tiles light shade 10mm thick (square/rectangular) anti skid, area of each tiles not exceeding 0.36sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.\n(1052 + 0)* | ITEM NO-1.037 | 1052 | Sqm |
39 | 1.038 | All as per Sr. item No 35 here-in-above but as in skirting/dado over 10mm thick rendering in CM (1:3)complete all as specified and directed.\n(39 + 00)* | ITEM NO-1.038 | 39 | Sqm |
40 | 1.039 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade complete over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.\n(76 + 822)* | ITEM NO-1.039 | 898 | Sqm |
41 | 1.04 | M&L for glazed ceramic coloured tiles of size 350x250mmx7mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering CM(1:3) complete all as specified and directed.\n(198 + 3380)* | ITEM NO-1.04 | 3578 | Sqm |
42 | 1.041 | All as per item No 1.040 here-in-before but in skirting over 10 mm thick rendering in CM (1:3 ) complete as specified.\n(2 + 0)* | ITEM NO-1.041 | 2 | Sqm |
43 | 1.042 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube.\n(58 + 728)* | ITEM NO-1.042 | 786 | Rm |
44 | 1.043 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement to frame as per specification and drawings.\n(19 + 217)* | ITEM NO-1.043 | 236 | Sqm |
45 | 1.044 | S&F Butt hinges of 100mm size medium weight cold rolled Stainless steel \n(36 +1320)* | ITEM NO-1.044 | 1356 | Each |
46 | 1.045 | Supply & Fixing 150 mm Aluminium handles, cast type, anodised \n(24 + 144)* | ITEM NO-1.045 | 168 | Each |
47 | 1.046 | S&F Aluminium, anodised, barrel tower bolt 125 mm long of extruded section complete.\n(22 + 0)* | ITEM NO-1.046 | 22 | Each |
48 | 1.047 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.\n(177 +5561)* | ITEM NO-1.04700000000001 | 5738 | Sqm |
49 | 1.048 | M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.\n(402 +68)* | ITEM NO-1.04800000000001 | 470 | Sqm |
50 | 1.049 | Material & Labour 15mm thick plaster in cement mortar 1:4 on one side of lathing in two layers, 1st layer of 10mm thick and 5mm thick 2nd layer mixed with water proofing compound @ 3% by weight of cement finishing the surfaces with fair and even without using extra cement complete.\nNote: i) Integral water proofing compound shall be paid and measured separately.\n ii) Work will be carried out upto tripple storey building therfore quoted rate shall be deemed to be inclusive of scaffolding.\n(295 + 3410)* | ITEM NO-1.04900000000001 | 3705 | Sqm |
51 | 1.05 | M&L 12 mm thick plaster in CM 1:6 on other side of lathing finished even and smooth without using extra cement complete all as specified and directed. \n(266 + 0)* | ITEM NO-1.05000000000001 | 266 | Sqm |
52 | 1.051 | S & F wire netting of galvanised steel wire 0.71 mm dia and size of mesh 12mm fixed with tinned tack of wire staple.\n(372 + 0)* | ITEM NO-1.05100000000001 | 372 | Sqm |
53 | 1.052 | M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation complete all as specified and directed. \n(168 + 5561)* | ITEM NO-1.05200000000001 | 5729 | Sqm |
54 | 1.053 | M&L for preparing old decorated plastered or unplastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.\n(268 + 11729)* | ITEM NO-1.05300000000001 | 11997 | Sqm |
55 | 1.054 | M&L for preparing old decorated plastered or unplastered surface of wall and applying one coat of oil bound distemper over and including 1 mm thick wall care putty complete all as specified and directed.\n(464 + 0)* | ITEM NO-1.05400000000001 | 464 | Sqm |
56 | 1.055 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed.\n(711 + 0)* | ITEM NO-1.05500000000001 | 711 | Sqm |
57 | 1.056 | M&L for preparing old surface of plaster or unplastered wall and applying two coats of cement paint, white or tinted complete all as specified and directed.\n(157 + 0)* | ITEM NO-1.05600000000001 | 157 | Sqm |
58 | 1.057 | M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty filling complete all as specified and directed.\n(13 + 0)* | ITEM NO-1.05700000000001 | 13 | Sqm |
59 | 1.058 | M&L for second class hardwood as in scantlings clean sawn timber complete.\n(5.5 + 0)* | ITEM NO-1.05800000000001 | 5.5 | Cum |
60 | 1.059 | S & F Solid PVC Wall Lining/Cladding consisting of 5mm thick Wood Grain printed PVC Sheet inclusive of Solvent Cement and Fixing on PVC Frame as per specification & drawing \n(520 +0)* | ITEM NO-1.05900000000001 | 520 | Sqm |
61 | 1.06 | M & L for 2nd class hard wood plain fillets, square, rectangular or triangular in section clean sawn, secured with nails exc 13 and n.exc 25 sqcm. Complete.\n(287 + 0)* | ITEM NO-1.06000000000001 | 287 | RM |
62 | 1.061 | M & L for 2nd class hard wood plain fillets, square, rectangular or triangular in section clean sawn, secured with nails exc 6 and n.exc 13 sqcm. Complete\n(122 + 0)* | ITEM NO-1.06100000000001 | 122 | RM |
63 | 1.062 | S & F 5 mm thick PVC Sheet Fillet of width 35 mm for wall Paneling inclusive of fixing on to wall to make PVC frame as per specification & drawing \n(606 + 0)* | ITEM NO-1.06200000000001 | 606 | RM |
64 | 1.063 | S & F for 4 mm thick of size 600x600mm HSPC (high pressure steam cured) pre-painted self embossed, classic designed E-Board to be fixed with aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including provisions for light fixtures of any size complete.\n(846 + 3248)* | ITEM NO-1.06300000000001 | 4094 | Sqm |
65 | 1.064 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.\n(1586 + 5636)* | ITEM NO-1.06400000000001 | 7222 | Sqm |
66 | 1.065 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.\n(271 + 3367.50)* | ITEM NO-1.06500000000001 | 3638.5 | Sqm |
67 | 1.066 | S & F for 1 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings complete \n(2 + 0)* | ITEM NO-1.06600000000001 | 2 | Sqm |
68 | 1.067 | Supply and fixing powder coated aluminium work in any position such as door, frame, grills, guard bars and aluminium partions etc members made out of extruded Aluminium of any section and in any position including jointing cleat for fixing complete.\n(797 + 14982)* | ITEM NO-1.06700000000001 | 15779 | Kg |
69 | 1.068 | S&F powder coated aluminium doors shutters, section weighing 0.55 kg per meter incl necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified.\n(113 + 0)* | ITEM NO-1.06800000000001 | 113 | Sqm |
70 | 1.069 | S&F powder coated aluminium window and ventilator shutters, sliding/fixed type without sash bar, aluminium section of size 40 x 18 x 1.29 mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.\n(131 + 0)* | ITEM NO-1.06900000000001 | 131 | Sqm |
71 | 1.07 | S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty exc 0.5 sqm each pane complete.\n(71 + 0)* | ITEM NO-1.07000000000001 | 71 | Sqm |
72 | 1.071 | S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty exc 0.5 sqm each pane complete.\n(81 + 0)* | ITEM NO-1.07100000000001 | 81 | Sqm |
73 | 1.072 | S & F in repair Figured glass 3 mm thick, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane\n(1 + 215)* | ITEM NO-1.07200000000001 | 216 | Sqm |
74 | 1.073 | S&F 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in aluminium partitions\n(96 + 0)* | ITEM NO-1.07300000000001 | 96 | Sqm |
75 | 1.074 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete.\n(51 + 0)* | ITEM NO-1.07400000000001 | 51 | Each |
76 | 1.075 | S&F 100 mm brass mortice lock ,vertical type 4 lever complete.\n(52 + 0)* | ITEM NO-1.07500000000001 | 52 | Each |
77 | 1.076 | S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section complete.\n(84 + 540)* | ITEM NO-1.07600000000001 | 624 | Each |
78 | 1.077 | S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete\n(34 + 0)* | ITEM NO-1.07700000000001 | 34 | Sqm |
79 | 1.078 | M&L for preparation of old plastered surface of walls and applying one coat of weather proof exterior emulsion paint.\nNote: The work will be carried out upto double and triple storey building using scaffolding and rate quoted shall be deemed included in quoted rate .\n(416 + 5904)* | ITEM NO-1.07800000000001 | 6320 | Sqm |
80 | 1.079 | M&L for preparation of new plastered surface of walls and applying two coat of weather proof exterior emulsion paint over a coat of primer as per manufacturer's instruction.\nNote: The work will be carried out upto double and triple storey building using scaffolding and rate quoted shall be deemed included in quoted rate .\n(343 + 3470)* | ITEM NO-1.07900000000001 | 3813 | Sqm |
81 | 1.08 | M&L for preparation of wood and wood based new surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete.\n(31 + 1126.6)* | ITEM NO-1.08000000000001 | 1157.6 | Sqm |
82 | 1.081 | M&L for preparation of wood and wood based old surfaces of any description not otherwise described over 10 cm girth or width and applying one coat of synthetic enamel paint.\n(40 + 844.60)* | ITEM NO-1.08100000000001 | 884.6 | Sqm |
83 | 1.082 | S&F in repair for vitreous China wash down water closet pan (pedestal pattern) white with 'P' or 'S' trap, front or back inlet, fixing bolts making all necessary connections (excluding fixing bolts, flushing cistern and flush pipe)\n(12 + 88)* | ITEM NO-1.08200000000001 | 100 | Each |
84 | 1.083 | S&F WC seat Cover soft PVC Spring loaded white colour all as specified \n(11 + 88)* | ITEM NO-1.08300000000001 | 99 | Each |
85 | 1.084 | S&F 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual flush type fixed with bracket complete all as specified. \n(Make Cera, F1020106 or equivalent in specified makes)\n(12 + 88)* | ITEM NO-1.08400000000001 | 100 | Each |
86 | 1.085 | Supply & Fix in repair Wash basins, Vitreous China (flat back or angle back type) of size 550 x 400 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.\n(12 + 112)* | ITEM NO-1.08500000000001 | 124 | Each |
87 | 1.086 | S&F in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) complete all as specified and directed.\n(1 + 0)* | ITEM NO-1.08600000000001 | 1 | Each |
88 | 1.087 | S&F for urinal spreader chromium plated screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete.\n(2 + 0)* | ITEM NO-1.08700000000001 | 2 | Each |
89 | 1.088 | S&F for water Tubes, 15 mm dia 'medium grade' galvanised iron pipe with all fitting and fixed complete to walls and ceilings or laid in floors\n(123 + 0)* | ITEM NO-1.08800000000001 | 123 | RM |
90 | 1.089 | S&F for water Tubes, 20 mm dia 'medium grade' galvanised iron pipe with all fitting and fixed complete to walls and ceilings or laid in floors\n(127 + 0)* | ITEM NO-1.08900000000001 | 127 | RM |
91 | 1.09 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule.\n(12 + 0)* | ITEM NO-1.09000000000001 | 12 | Each |
92 | 1.091 | S&F in repairs for 15mm dia of pipe stop valves, angle valves fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions.\n(37 + 0)* | ITEM NO-1.09100000000001 | 37 | Each |
93 | 1.092 | S & F for cromium plated health faucet with stand 1.0 mtr flexible lead with complete accessories all as specified and directed \n(12 + 100)* | ITEM NO-1.09200000000001 | 112 | Each |
94 | 1.093 | S&F for pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.\n(12 +0)* | ITEM NO-1.09300000000001 | 12 | Each |
95 | 1.094 | S&F in repairs, 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers\n(12 + 0)* | ITEM NO-1.09400000000001 | 12 | Each |
96 | 1.095 | Supply and fixing in repair soap-dish chromium plated stainless steel approx 160mm x 160mm x 1mm fixed to wall with plugs & CP brass screws complete\n(12 + 188)* | ITEM NO-1.09500000000001 | 200 | Each |
97 | 1.096 | S & F in repair toilet paper holder of chromium Plated fixed to walls with chromium plated (CP) brass screws \n(12 +100)* | ITEM NO-1.09600000000001 | 112 | Each |
98 | 1.097 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified.\n(12 + 188)* | ITEM NO-1.09700000000001 | 200 | Each |
99 | 1.098 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete.\n(26 + 376)* | ITEM NO-1.09800000000001 | 402 | Each |
100 | 1.099 | S & F in repair waste coupling of PTMT (half or full threaded) 32 mm dia.\n(13 + 112)* | ITEM NO-1.09900000000001 | 125 | Each |
101 | 1.1 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.\n(24 + 264)* | ITEM NO-1.10000000000001 | 288 | Each |
102 | 1.101 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall with PVC clamp and GI screws complete. \n(75 + 264)* | ITEM NO-1.10100000000001 | 339 | RM |
103 | 1.102 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall with PVC clamp and GI screws complete.\n(53 + 396)* | ITEM NO-1.10200000000001 | 449 | RM |
104 | 1.103 | S & F 110mm bore PVC (SWR) bends any radius complete.\n(12 + 44)* | ITEM NO-1.10300000000001 | 56 | Each |
105 | 1.104 | S & F 75mm bore PVC (SWR) bends any radius complete.\n(20 + 132)* | ITEM NO-1.10400000000001 | 152 | Each |
106 | 1.105 | S & F 110mm bore PVC (SWR) branch piece, single (single Y equal or unequal) complete.\n(6 + 00)* | ITEM NO-1.10500000000001 | 6 | Each |
107 | 1.106 | S&F in repair rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. \n(4 +112)* | ITEM NO-1.10600000000001 | 116 | Each |
108 | 1.107 | S&F in repair rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. \n(1 + 0)* | ITEM NO-1.10700000000001 | 1 | Each |
109 | 1.108 | M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection, under pavements finished fair and even without using extra cement.\n(473 + 1420.50)* | ITEM NO-1.10800000000001 | 1893.5 | Sqm |
110 | 1.109 | M & L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregates) as in surface channels and drains\n(55 + 108.20)* | ITEM NO-1.10900000000001 | 163.2 | Cum |
111 | 1.11 | M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement\n(549 + 1826)* | ITEM NO-1.11000000000001 | 2375 | RM |
112 | 1.111 | Add or deduct for each 25 mm girth or part thereof over or under 30 cm girth of drain or channel\n(4970 + 600)* | ITEM NO-1.11100000000001 | 5570 | Rm |
113 | 1.112 | M & L for Pressure grouting of honey combed concrete with cement Slurry by adding CEBEX 100 or Equivalent @ 255 gms/50 Kg of Cement \n(110 + 1200)* | ITEM NO-1.11200000000001 | 1310 | Per Nozzle |
114 | 1.113 | M&L for anti-termite treating the top surface of filled earth @ rate of 5 litre of emulsion per Sqm of Surface \n(1096 + 0)* | ITEM NO-1.11300000000001 | 1096 | Sqm |
115 | 1.114 | M&L for anti-termite treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the peimiter wall including drilling and plugging holes etc in apron complete all as specified and directed.\n(640 + 1834)* | ITEM NO-1.11400000000001 | 2474 | Rm |
116 | 1.115 | Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.\n(122 + 177)* | ITEM NO-1.11500000000001 | 299 | Each |
117 | 1.116 | M & L for Sand Cushioning under pavers block, filling under floors, top & bottom and sides of sewage pipes including watering and consolidation complete all as specified and directed. \n(11 + 73.75)* | ITEM NO-1.11600000000001 | 84.75 | Cum |
118 | 1.117 | M & L Machine pressed glossy type vibro compacted precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed with grey cement and no pigment.\n(216 + 980.50)* | ITEM NO-1.11700000000001 | 1196.5 | Sqm |
119 | 1.118 | M & L for cement concrete type B1 1:2:4 (20 mm graded aggregate) in cills, coping, kerbs, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, as directed edges \n(6.70 + 34.60)* | ITEM NO-1.11800000000001 | 41.3 | CUM |
120 | 1.119 | Taking down and refixing shutters of any description exc 1 Sqm and n exc 2 Sqm each.\n(0 + 440)* | ITEM NO-1.11900000000001 | 440 | Each |
121 | 1.12 | Demolition of Stone slabs and tiles laid, bedded, and pointed in any mortar, of any description or thickness in floors, aprons complete all as specified and directed.\n(0 + 100)* | ITEM NO-1.12000000000001 | 100 | X Sqm |
122 | 1.121 | M & L for RCC (nominal mix) type A1 1:1 1/2:3 (20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like \n(0 + 5.80)* | ITEM NO-1.12100000000001 | 5.8 | Cum |
123 | 1.122 | M & L for RCC (nominal mix) type A1 1:1 1/2:3 (20 mm graded aggregate) in chajjas, beams, cantilevers, bressummers, lintel over 1.5m span.\n(0 + 8.35)* | ITEM NO-1.12200000000001 | 8.35 | Cum |
124 | 1.123 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.\n(0 + 167.40)* | ITEM NO-1.12300000000001 | 167.4 | Sqm |
125 | 1.124 | S & F 30mm wide continuous (piano) hinges, mild steel, bright finish or electro-galvanised.\n(0 + 908)* | ITEM NO-1.12400000000001 | 908 | Rm |
126 | 1.125 | S & F 35 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete.\n(0 + 176)* | ITEM NO-1.12500000000001 | 176 | Sqm |
127 | 1.126 | S & F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass. Sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a)\n(0 + 176)* | ITEM NO-1.12600000000001 | 176 | Sqm |
128 | 1.127 | S & F 100mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete\n( 0 + 272)* | ITEM NO-1.12700000000001 | 272 | Each |
129 | 1.128 | Supply & Fixing 150 mm extruded Aluminium handles, fabricated type, anodised.\n(0 + 912)* | ITEM NO-1.12800000000001 | 912 | Each |
130 | 1.129 | Supply & Fixing in repair 150 mm extruded Aluminium handles, fabricated type, anodised.\n( 0 + 528)* | ITEM NO-1.12900000000001 | 528 | Each |
131 | 1.13 | S&F Aluminium, anodised, barrel tower bolt 150 mm long of extruded section complete.\n(0 + 352)* | ITEM NO-1.13000000000001 | 352 | Each |
132 | 1.131 | S&F in repair Aluminium, anodised, barrel tower bolt 150 mm long of extruded section complete.\n( 0 + 504)* | ITEM NO-1.13100000000001 | 504 | Each |
133 | 1.132 | S&F in repair Aluminium, anodised, barrel tower bolt 200mm long of extruded section complete.\n( 0 + 472)* | ITEM NO-1.13200000000001 | 472 | Each |
134 | 1.133 | S & F in repair aluminium (die cast) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg.\n( 0 + 124)* | ITEM NO-1.13300000000001 | 124 | Each |
135 | 1.134 | S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.\n(0 + 88)* | ITEM NO-1.13400000000001 | 88 | Each |
136 | 1.135 | S & F in repair 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.\n(0 + 212)* | ITEM NO-1.13500000000001 | 212 | Each |
137 | 1.136 | M & L for 4mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats all as specified and directed.\n( 0 + 398.30)* | ITEM NO-1.13600000000001 | 398.3 | Sqm |
138 | 1.137 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, overall length of cover plate 140mm \n(0 + 440)* | ITEM NO-1.13700000000001 | 440 | Each |
139 | 1.138 | M & L for polythene film, 150 micron thick laid over and including one coat of bitumen primer @ 0.3 to 0.5 Kg per Sqm on roof surface.\n(0 + 1100)* | ITEM NO-1.13800000000001 | 1100 | Sqm |
140 | 1.139 | M & L for PCC 1:5:10 type E2 using 40mm graded brick aggregate as in filling of sunken portion etc. complete.\n(0 + 19.10)* | ITEM NO-1.13900000000001 | 19.1 | Cum |
141 | 1.14 | M & L for PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in hold fast complete.\n(0 + 41.40)* | ITEM NO-1.14000000000002 | 41.4 | Cum |
142 | 1.141 | M & L for 25 mm thick cement concrete as in Floors type B-0, 1:2:4 (12.5mm graded stone aggregates) finished even and smooth without using extra cement.\n( 0 + 1200)* | ITEM NO-1.14100000000002 | 1200 | Sqm |
143 | 1.142 | M & L for Neeru finish to plastering complete all as specified and directed.\n(0 + 1420.50)* | ITEM NO-1.14200000000002 | 1420.5 | Sqm |
144 | 1.143 | M & L for brick work built in CM 1:4 with sub class 'B' brick half brick thick straight or curved on plan to any radius complete all as specified and directed\n(0 + 47.50)* | ITEM NO-1.14300000000002 | 47.5 | Sqm |
145 | 1.144 | S & F as in replacement 19/20 mm dia mild steel chromium plated curtain rod with and including fixing bracket complete\n(0 + 739.00)* | ITEM NO-1.14400000000002 | 739 | Rm |
146 | 1.145 | S & F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.\n(0 + 511.00)* | ITEM NO-1.14500000000002 | 511 | Sqm |
147 | 1.146 | S & F in replacement stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.\n(0 + 150.00)* | ITEM NO-1.14600000000002 | 150 | Sqm |
148 | 1.147 | Roughening surfaces of old concrete floor/terrace by picking including taking down existing detoriated/decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean and washing down with water to remove dust complete.\n(0 + 4179.00)* | ITEM NO-1.14700000000002 | 4179 | Sqm |
149 | 1.148 | Material & Labour for screed bed or bedding layer of 10mm thick in cement mortar (1:3) mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof complete.\nNote: Water proofing compound shall be measured and paid seperately\n(0 + 621.50)* | ITEM NO-1.14800000000002 | 621.5 | Sqm |
150 | 1.149 | M & L for applying water proofing treatment over cleaned roof surface with super thermo APP modified water proofing membrane comprising of following : \n(a) Applying evenly one coat of cold bituminous primer conforming to IS-3384-1986@0.30 Kg per square metre on the cleaned plastered surfaces\n(b) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.\n(c) Applying a layer of APP based polymeric membrane, 3mm thick (minimum) weighing 3.50 Kg per square metre reinforced) with polyester non woven fabric weighing not less than 160 gms per square metre by torch application. The overlap shall not to be less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps.\n(d) Applying evenly one coat of blown hot bitumen of grade 85/25@ 1.20 Kg per square metre on primed surfaces.\n(e) Applying evenly one coat of aluminium paint @ 0.10 litre per square metre over the APP based polymeric membrane.\n(0 + 621.50)* | ITEM NO-1.14900000000002 | 621.5 | Sqm |
151 | 1.15 | Supply only integral water proofing compound ISI marked.\n(0 + 1083.00)* | ITEM NO-1.15000000000002 | 1083 | Kg |
152 | 1.151 | M & L for applying cement slurry over concrete surfaces @3kg/sqm. \n(0 + 3557.50)* | ITEM NO-1.15100000000002 | 3557.5 | Sqm |
153 | 1.152 | M & L for applying tile adhesive not exceeding 7 mm thick for laying tiles in floor including levelling the floor if required.\nMake: ferrioscrete (Ferro-1122)/ fevimate, SC-Pedilite/Goldstar of Bal Endura or equivalent \n( 0 + 3557.50)* | ITEM NO-1.15200000000002 | 3557.5 | Sqm |
154 | 1.153 | Material and labour for non skid ceramic tiles light shade 7 to 8 mm thick (square/rectangular) anti skid, area of each tiles exceeding 0.18 Sqm not exceeding 0.38sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.\n( 0 + 3317.50)* | ITEM NO-1.15300000000002 | 3317.5 | Sqm |
155 | 1.154 | All as per Sr. item No 1.153 here-in-above but on skirting/dado over 10mm thick back coat in CM (1:4)complete all as specified and directed.\n(0 + 637.50)* | ITEM NO-1.15400000000002 | 637.5 | Sqm |
156 | 1.155 | Material & labour for Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.\n(0 + 695.00)* | ITEM NO-1.15500000000002 | 695 | Sqm |
157 | 1.156 | Material & Labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20mm thick screed bed (bedding layer) in CM 1:4 complete all as specified and directed. \n( 0 + 504.00)* | ITEM NO-1.15600000000002 | 504 | Sqm |
158 | 1.157 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose type of soil complete all as specified and directed.\n(0 + 980.50)* | ITEM NO-1.15700000000002 | 980.5 | Sqm |
159 | 1.158 | M&L for preparation of new or previously untreated surfaces of steel and iron work of any description not exc. 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide prime in any tint complete all as specified.\n(0 + 143.30)* | ITEM NO-1.15800000000002 | 143.3 | X Rm |
160 | 1.159 | Supply & fix steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.\n(0 + 9251)* | ITEM NO-1.15900000000002 | 9251 | Kg |
161 | 1.16 | M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregates) as in Sub base\n(0 + 132.00)* | ITEM NO-1.16000000000002 | 132 | Sqm |
162 | 1.161 | Material & Labour for Rendering 5mm thick in CM 1:3 concrete ceiling surfaces, rendering is to be finished even and smooth without using extra cement complete all as specified and directed.\n( 0 + 300.00)* | ITEM NO-1.16100000000002 | 300 | Sqm |
163 | 1.162 | M & L for 2mm thick birla white putty/JK white wall care putty on wall complete.\n(0 + 5561.00)* | ITEM NO-1.16200000000002 | 5561 | Sqm |
164 | 1.163 | M & L for Preparing Surfaces Of Wood And Wood Based Materials,Steel And Iron Work, new or old, of Any Description Treating Small Articles Such As stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area not exceeding 0.1sq.m Each with tar or coal tar black paint complete\n(0 + 2.65)* | ITEM NO-1.16300000000002 | 2.65 | Per 100 Nos. |
165 | 1.164 | Material and labour for writing letters or figures with synthetic enamel paint (Block.Roman,Italic or Indian) not exc.30 cm high complete all as specified and directed.\n(0 + 11.00) * | ITEM NO-1.16400000000002 | 11 | Per 10 Nos |
166 | 1.165 | S&F sheet glass plain or coloured 5.5 mm thick ordinary quality and glazing n exc 0.5 sqm each pane complete.\n(0 + 807.00)* | ITEM NO-1.16500000000002 | 807 | Sqm |
167 | 1.166 | Supplying and laying of 16 mm outer diameter CPVC pipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.\n(0 + 2200.00)* | ITEM NO-1.16600000000002 | 2200 | Rm |
168 | 1.167 | Supplying and laying of 20 mm outer diameter CPVC pipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.\n(0 + 660.00)* | ITEM NO-1.16700000000002 | 660 | Rm |
169 | 1.168 | Cutting chases, plainning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, sillls, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good cutting not exc 10 cm girth in brick walls.\n(0 + 440.00)* | ITEM NO-1.16800000000002 | 440 | Rm |
170 | 1.169 | M & L for sealing and grouting the mouth of pipes using Fosroc's non shrink grout Coextra GP2 or equivalent for 110mm dia complete\n(0 + 88.00)* | ITEM NO-1.16900000000002 | 88 | Each |
171 | 1.17 | M & L for sealing and grouting the mouth of pipes using Fosroc's non shrink grout Coextra GP2 or equivalent for 75mm dia complete\n(0 + 264.00)* | ITEM NO-1.17000000000002 | 264 | Each |
172 | 1.171 | S & F 110mm bore PVC (SWR) branch piece, single (single T equal or unequal) complete.\n(0 + 92.00)* | ITEM NO-1.17100000000002 | 92 | Each |
173 | 1.172 | S & F 75mm bore PVC (SWR) branch piece, single (single T equal or unequal) complete.\n(0 + 132.00)* | ITEM NO-1.17200000000002 | 132 | Each |
174 | 1.173 | Supply & Fix in repair Gun-metal, globe or gate valves (ISI Marked) for iron pipe 20mm bore with iron wheel head, screwed both ends complete all as specified and directed.\n(0 + 176)* | ITEM NO-1.17300000000002 | 176 | Each |
175 | 1.174 | S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule.\n(0 + 388.00)* | ITEM NO-1.17400000000002 | 388 | Each |
176 | 1.175 | S&F in repairs for 15mm dia of pipe concealed stop valves of chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions.\n(0 +188.00)* | ITEM NO-1.17500000000002 | 188 | Each |
177 | 1.176 | S&F in repairs for 15mm dia of pipe angle valves of chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions.\n(0 + 376.00)* | ITEM NO-1.17600000000002 | 376 | Each |
178 | 1.177 | S&F in repair pillar taps suitable for 15mm dia pipe, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.\nMake: ESSCO, Cat No. DLX-508 or equivalent in specified makes\n(0 + 112.00)* | ITEM NO-1.17700000000002 | 112 | Each |
179 | 1.178 | S & F in repair peg set of six chromium plated fixing with screw.\n(0 + 264.00)* | ITEM NO-1.17800000000002 | 264 | Each |
180 | 1.179 | S & F in repair waste coupling of PTMT (half or full threaded) 40 mm dia.\n(0 + 100.00)* | ITEM NO-1.17900000000002 | 100 | Each |
181 | 1.18 | S & F in repair PVC waste pipe, 32 mm bore, 750mm long for basin.\n(0 + 112.00)* | ITEM NO-1.18000000000002 | 112 | Each |
182 | 1.181 | Supply & Fix Chromium plated shower roses 125mm size with shower arms fixing to steel pipe or union complete all as specified and directed.\nMake: ESSCO Cat NO. EOS-542A or as equivalent in specified makes\n(0 + 112.00)* | ITEM NO-1.18100000000002 | 112 | Each |
183 | 1.182 | S&F in repair Brass chromium plated towel ring round fixed with and including chromium plated brass screws complete all as specified and directed.\n(0 + 100.00)*\n | ITEM NO-1.18200000000002 | 100 | Each |
184 | 1.183 | S&F in repairs Grating doom 100 mm dia with waste hole of PTMT (Minimum weight 25 gms) complete all as specified and as directed.\n(0 + 276.00)* | ITEM NO-1.18300000000002 | 276 | Each |
185 | 1.184 | S&F in repair Corner Sheet glass shelf assembly 300mm radius made of 6mm thick glass with CP metal bracket and CP guard rail fixed with suitable rowal plug & screws complete all as specified and directed.\n(0 + 300.00)* | ITEM NO-1.18400000000002 | 300 | Each |
186 | 1.185 | S&F glass shelf assembly made of 5.5 mm thick glass, 12 cm wide and 60cm long with CP metal bracket and CP guard rail fixed with suitable rowal plug & screws complete all as specified and directed.\n(0 + 112.00)* | ITEM NO-1.18500000000002 | 112 | Each |
187 | 1.186 | S&F in repairs sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm (approx with + 10 mm difference in dimensions as per manufacturers Catalogue) complete all as specified and as directed.\n(0 + 84.00)* | ITEM NO-1.18600000000002 | 84 | Each |
188 | 1.187 | S&F in replacement stainless steel kitchen plate rack of size 750mm x 600mm x 250mm (approx with + 10 mm difference in dimensions as per manufacturers Catalogue), thickness of stainless steel sheet shall not be less than 1.00 mm fixed with CP cntilever brackets, complete all as specified and as directed.\n(0+88.00)* | ITEM NO-1.18700000000002 | 88 | Each |
189 | 1.188 | S & F Fancy glass rectangular edge mirror of size 18 inch x 24 inch\n(0 + 100.00)* | ITEM NO-1.18800000000002 | 100 | Each |
190 | 1.189 | Dismantling water tanks and removing to store exc 250ltr but n exc 500 ltr complete all as specified and directed.\n(0 + 112.00)* | ITEM NO-1.18900000000002 | 112 | Each |
191 | 1.19 | S & F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5kg each\n(0 + 2000.00)* | ITEM NO-1.19000000000002 | 2000 | Kg |
192 | 1.191 | Demolition and breaking up drain pipes (salt glazed, stoneware, ac or reinforced concrete) set in cement mortar upto 100mm dia complete all as directed.\n(0 + 660.00)* | ITEM NO-1.19100000000002 | 660 | RM |
193 | 1.192 | Demolition and breaking up drain pipes (salt glazed, stoneware, ac or reinforced concrete) set in cement mortar upto 150mm dia complete all as directed.\n(0 + 630.00)* | ITEM NO-1.19200000000002 | 630 | RM |
194 | 1.193 | Demolition and breaking up drain pipes (salt glazed, stoneware, ac or reinforced concrete) set in cement mortar upto 200mm dia complete all as directed.\n(0 + 315.00)* | ITEM NO-1.19300000000002 | 315 | RM |
195 | 1.194 | M & L for DWCPE (SN8) 150mm (ID) diameter pipes laid in trenches \n(0 + 630.00)* | ITEM NO-1.19400000000002 | 630 | RM |
196 | 1.195 | M & L for DWCPE (SN8) 200mm (ID) diameter pipes laid in trenches \n(0 + 315.00)* | ITEM NO-1.19500000000002 | 315 | RM |
197 | 1.196 | M & L for anto-termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.\n(0 + 2980.00)* | ITEM NO-1.19600000000002 | 2980 | Sqm |
198 | 1.197 | M & L for anti-termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same \n(0 + 3872.00)* | ITEM NO-1.19700000000002 | 3872 | RM |
199 | 1.198 | Cutting openings, through brick walls built cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m\n(0 + 1.82)* | ITEM NO-1.19800000000002 | 1.82 | Cum |
200 | 1.199 | S & F Pressed steel frames 105 mm x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete.\n(0 + 1320.00)* | ITEM NO-1.19900000000002 | 1320 | RM |
201 | 1.2 | S & F Pressed steel frames 125 mm x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete.\n(0 + 440.00)* | ITEM NO-1.20000000000002 | 440 | RM |
202 | 1.201 | Supply & Fix 32 mm Low Density Polyethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed complete to wall ceiling or in floors complete all as specified and directe.\n(0 + 105.00)* | ITEM NO-1.20100000000002 | 105 | RM |
203 | 1.202 | Supply & Fix 40 mm Low Density Polyethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed complete to wall ceiling or in floors complete all as specified and directe.\n(0 + 105.00)* | ITEM NO-1.20200000000002 | 105 | RM |
204 | 1.203 | Supply & Fix 50 mm Low Density Polyethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed complete to wall ceiling or in floors complete all as specified and directe.\n(0 + 105.00)* | ITEM NO-1.20300000000002 | 105 | RM |
205 | 1.204 | Material & Labour for three coats White washing on wall including preparation of new surfaces complete all as specified and directed\n(0 + 250.00)* | ITEM NO-1.20400000000002 | 250 | Sqm |
206 | 1.205 | Material & Labour for three coats White washing on ceiling including preparation of new surfaces complete all as specified and directed.\n(0 + 100.00)* | ITEM NO-1.20500000000002 | 100 | Sqm |
207 | 1.206 | Material and labour for preparation of old decorated plastered surface of walls including cornices pilasters etc., and applying one coat of white wash,complete all as specified and directed. White washing shall be carried out upto double storey building the rate of scaffolding shall be deemed to included in quoted rate.\n(0 + 1100.00)* | ITEM NO-1.20600000000002 | 1100 | Sqm |
208 | 1.207 | Material and labour for preparation of old decorated plastered surface of ceiling including cornices pilasters etc., and applying one coat of white wash,complete all as specified and directed. White washing shall be carried out upto double storey building the rate of scaffolding shall be deemed to included in quoted rate.\n(0 + 250.00)* | ITEM NO-1.20700000000002 | 250 | Sqm |
209 | 1.208 | S & F Mild Steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work with 12 mm dia square / round bar conforming to Fe-290 (Gde E-165).\n(0 + 400.00)* | ITEM NO-1.20800000000002 | 400 | Kg |
210 | 1.209 | Disoconnecting existing tanks of capacity exc 500 ltr and n exc 1000 ltr, setting aside or lowering if required for repairs and clening the complete inner surface by rubber/nylon scraper to remove sludge/silt and washing with bleaching powder solution and then clean with clear water etc. and hoisting reconnecting and re-fixing in position\n(0 + 20.00)* | ITEM NO-1.20900000000002 | 20 | Each |
211 | 1.21 | S & F Brass Elbow for 16 mm outer diameter CPVC pipe\n(0 + 200.00)* | ITEM NO-1.21000000000002 | 200 | Each |
212 | 1.211 | S & F stainless steel work grade 304 SS making shape, cutting, bending, welding without removing stainless steel coating as in railing, gate etc including all fittings.\n(0 + 361.00)* | ITEM NO-1.21100000000002 | 361 | Kg |
213 | 1.212 | S & F as in replacement shower arm 15mm size, 195mm long with bend of 45 degree with flange of chromium plated.\n(0 + 112.00)* | ITEM NO-1.21200000000002 | 112 | Each |
214 | 1.213 | Material and labour for vitrified ceramic tiles light shade 10mm thick (square/rectangular) anti skid, area of each tiles not exceeding 0.36sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed with tile adhesive complete all as specified and directed.\n(0 + 240.00)* | ITEM NO-1.21300000000002 | 240 | Sqm |
215 | 1.214 | S&F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm (approx with + 10 mm difference in dimensions as per manufacturers Catalogue) complete all as specified and as directed.\n(0 + 12.00)* | ITEM NO-1.21400000000002 | 12 | Each |
216 | 1.215 | S&F in replacement stainless steel kitchen plate rack of size 900mm x 750mm x 250mm (approx with + 10 mm difference in dimensions as per manufacturers Catalogue), thickness of stainless steel sheet shall not be less than 1.00 mm fixed with CP cntilever brackets, complete all as specified and as directed.\n(0 + 12.00)* | ITEM NO-1.21500000000002 | 12 | Each |
217 | 1.216 | S & F wall mounted EWC with flushing cistern and all accessories \nMake: Hindware catalogue No.20109 or equivalent in specified makes\n(0 + 24.00)* | ITEM NO-1.21600000000002 | 24 | Each |
218 | 1.217 | M & L for 10-15mm thick Endura staircase tiles with roughening of surface, laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles complete all as specified and directed.\n(0 + 367.00)* | ITEM NO-1.21700000000002 | 367 | Sqm |
219 | 1.218 | M & L for 10-15mm thick Endura staircase tiles on verticle surface as in skirting/dado, laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles complete all as specified and directed.\n(0 + 66.00)* | ITEM NO-1.21800000000002 | 66 | Sqm |
220 | 1.219 | Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embeded portionand making good disturbed ground Posts embedded in Natural ground.\n(0 + 30)* | ITEM NO-1.21900000000002 | 30 | Rm |
221 | 1.22 | Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embeded portionand making good disturbed ground Posts embedded in concrete\n(0 + 30.00)* | ITEM NO-1.22000000000002 | 30 | Rm |
222 | 1.221 | Dismantling of fencing wire mesh of any type and size\n( 0 + 36.00)* | ITEM NO-1.22100000000002 | 36 | Sqm |
223 | 1.222 | Supply & fix mild steel work angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.\n(0 + 446.00)* | ITEM NO-1.22200000000002 | 446 | Kg |
224 | 1.223 | Supply and fix MS galvanised steel wire chain link fencing of wire mesh nominal pitch of wire not exc 100mm, plain wire, dia of each wire each way exc 2.5mm including line wires, with standard rails, straining bolts, including provision of binding wire complete all as specified and directed.\n(0 + 276.00)* | ITEM NO-1.22300000000002 | 276 | Kg |
225 | 1.224 | M&L for MS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips confirming to Fe-410W (Gde E-250) quality A or Fe-290 (Gde E-165)\n(0 + 124.00)* | ITEM NO-1.22400000000002 | 124 | Kg |
226 | 1.225 | Supply and fix 12mm dia of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc 5cm and not exc 10cm long complete all as specified and directed.\n(0 + 12.00)* | ITEM NO-1.22500000000002 | 12 | Kg |
227 | 1.226 | M&L for rendering 15mm thick in CM 1:4 on stone masonary surfaces or surfaces other than fair face finished even and smooth without using extra cement.\n(0 + 60.00)* | ITEM NO-1.22600000000002 | 60 | Sqm |
228 | 1.227 | M &L for PCC 1:3:6 (40mm graded aggregate) type D2 as in foundation complete all as specified and directed.\n(0 + 6.75)* | ITEM NO-1.22700000000002 | 6.75 | Cum |
229 | 1.228 | M & L for random rubble uncoursed stone walling well bounded, beded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.\n(0 + 38.00)* | ITEM NO-1.22800000000002 | 38 | Cum |
230 | 1.229 | M & L for random rubble uncoursed stone walling (except stone) well bounded, beded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.\n(0 + 7.50)* | ITEM NO-1.22900000000002 | 7.5 | Cum |
231 | 1.23 | Material & Labour for precast cement concrete type C1 ( 1:3:6, using 20mm graded crushed stone aggregates) as in bond stones set in cement mortar 1:6 complete all as specified and as directed.\n( 0 + 2.00)* | ITEM NO-1.23000000000002 | 2 | Cum |
232 | 1.231 | Hand packing, except material (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level\n(0 + 5.00)* | ITEM NO-1.23100000000002 | 5 | Cum |
233 | 1.232 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto courses in hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc. 20 mm of lime or sand stone complete all as specified and directed.\n(0 + 30.00)* | ITEM NO-1.23200000000002 | 30 | Sqm |
234 | 1.233 | Material & Labour for raised pointing to random rubble masonary uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.\n(0 + 10.00)* | ITEM NO-1.23300000000002 | 10 | X Sqm |
235 | 2 | E/M Portion | |||
236 | 2.001 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete.\n(1089.00 + 4262.00)* | ITEM NO-2.001 | 5351 | Point |
237 | 2.002 | M&L for Point wiring for One light point controlled by one, one way switch complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed.\n(5390.00 + 0)* | ITEM NO-2.002 | 539 | Point |
238 | 2.003 | M&L for Point wiring for One 3 pin socket outlet 5 Amps on the same board with other switches. complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed.\n(50.00 + 0)* | ITEM NO-2.003 | 50 | Point |
239 | 2.004 | M&L for Point wiring for One 3 pin socket outlet 5 Amps on the switch socket combination on independent board complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site and 50 mm deep complete all as specified and as directed. \n(380.00 + 0)* | ITEM NO-2.004 | 380 | Point |
240 | 2.005 | All as per item No- 2.002 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. \n(120.00 + 0)* | ITEM NO-2.005 | 120 | Point |
241 | 2.006 | S & F for Switch piano flush type single pole, one way 5A complete\n(969.00 + 1838.00)* | ITEM NO-2.006 | 2807 | Each |
242 | 2.007 | S & F for Socket outlet, 2 in 1, 5 pin 5A flush type \n(430.00 + 268.00)* | ITEM NO-2.007 | 698 | Each |
243 | 2.008 | S & F for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type \n(120.00 + 324.00)* | ITEM NO-2.008 | 444 | Each |
244 | 2.009 | S & F for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc.\n(82.00 + 84.00)* | ITEM NO-2.009 | 166 | Each |
245 | 2.01 | S & F for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.\n(156.00 + 1480.00)* | ITEM NO-2.01 | 1636 | Each |
246 | 2.011 | S & F for bell piush, flush type, 5 Amps \n(35.00 + 76.00)* | ITEM NO-2.011 | 111 | Each |
247 | 2.012 | S & F for Electric Bell , AC 230 volts, single pole \n(35.00 + 100.00)* | ITEM NO-2.012 | 135 | Each |
248 | 2.013 | S&F sheet metal enclosure SPN with two pin and earth plug and socket complete one single pole MCB 32 Amps complete.\n(35.00 + 0)*\n | ITEM NO-2.013 | 35 | Each |
249 | 2.014 | S & F sub main wiring with two runs of 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with FR PVC insulated multi standard copper conductors of , 1100 volts grade, drawn through and including PVC double locked Casing & caping including taking down existing burnt any type of sub main wiring complete.\n(Note: Two runs of main wire and on run of earth wire with 1 run of PVC casing /caping shall be measured as single unit.)\n(800.00 + 0)*\n | ITEM NO-2.014 | 800 | RM |
250 | 2.015 | S&F sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with FR PVC insulated multi standard copper conductors of , 1100 volts grade, drawn through and including PVC double locked Casing & caping including taking down existing burnt any type of sub main wiring complete.\n(Note: Two runs of main wire and on run of earth wire with 1 run of PVC casing /caping shall be measured as single unit.)\n(650.00 + 0)* | ITEM NO-2.015 | 650 | RM |
251 | 2.016 | S&F sub main wiring with two runs of 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with FR PVC insulated multi standard copper conductors of , 1100 volts grade, drawn through and including PVC double locked Casing & caping including taking down existing burnt any type of sub main wiring complete.\n(Note: Two runs of main wire and on run of earth wire with 1 run of PVC casing /caping shall be measured as single unit.)\n(400.00 + 10800.00)* | ITEM NO-2.016 | 11200 | RM |
252 | 2.017 | S & F for Lamp holder , PVC/ Polycarbonate type with PVC round/square block including 9 watt LED lamp suitable for lamp holder fittings incl taking down old unserviceable light fitting. \n(140.00 + 288.00)* | ITEM NO-2.017 | 428 | Each |
253 | 2.018 | S & F 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and as directed.\nMake : Havells Cat No LHFXCEP1TNNW020(batten) & LHLDDCXCML8Q020(LED Tube) or as equivalent in specified makes\n(50.00 + 0)* | ITEM NO-2.018 | 50 | Each |
254 | 2.019 | S & F 09 watt LED, 2' tube light, Wall mounted with polycarbonate housing/ batten.\nMake : Havells Cat No LHEXBLP7IN1W009 or equivalent in specified makes.\n(12.00 + 0)* | ITEM NO-2.019 | 12 | Each |
255 | 2.02 | S & F LED 1x20W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting complete all as specified and directed.\nMake:- Havells Endurapearl SL20WLLED757SASYTOPCMP or as equivalent in specified makes\n(12.00 + 0)* | ITEM NO-2.02 | 12 | Each |
256 | 2.021 | S & F 42 watt LED, 2'x2' recess mounted ceiling light fitting extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic drive etc. with all accessories internally pre wired \nMake: CTLRN-36-FO-CDL or equivalent in specified makes. \n(200.00 + 0)* | ITEM NO-2.021 | 200 | Each |
257 | 2.022 | S & F table focus light hanging white led lamp with all accessories complete all as specified and as directed.\n(7.00 + 0)*\n | ITEM NO-2.022 | 7 | Each |
258 | 2.023 | S & F Map focus light white led fitting with all accessories complete all as specified and as directed.\n(25.00 + 0)*\n | ITEM NO-2.023 | 25 | Each |
259 | 2.024 | S & F LED Panel 15 Watt round type mounting White/Warm colour ceiling light fitting extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic drive etc. with all accessories internally pre wired \nMake: HPL Cat No HPLLEDRP15(CW) or as equivalent in specified makes\n(30.00 + 0)*\n | ITEM NO-2.024 | 30 | Each |
260 | 2.025 | S & F MCB Distribution board double door type TPN 4 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. for fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.\n(5.00 + 0)*\n | ITEM NO-2.025 | 5 | Each |
261 | 2.026 | S & F MCB TPN 63 Amps, 415 volts, 50 Hz , 'C' series incl taking down old unsv MCB complete all as specified and as directed.\n(5.00 + 0)*\n | ITEM NO-2.026 | 5 | Each |
262 | 2.027 | S & F MCB Distribution board double door type SPN 4 way, sheet steel, powder coated, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.\n(12.00 + 12.00)*\n | ITEM NO-2.027 | 24 | Each |
263 | 2.028 | S & F for MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.\n(36.00 + 152.00)*\n | ITEM NO-2.028 | 188 | Each |
264 | 2.029 | S & F MCB SPN 40 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed\n(50.00 + 188.00)*\n | ITEM NO-2.029 | 238 | Each |
265 | 2.03 | S & F MCB SP 16-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.\n(380.00 + 1528.00)*\n | ITEM NO-2.03 | 1908 | Each |
266 | 2.031 | S&F ceiling fan 1200 mm sweep, 5 star rating including suitable size of fan hook and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed.\n(83.00 + 352.00)*\n | ITEM NO-2.031 | 435 | Each |
267 | 2.032 | S&F Exhaust fan, BLDC plastic, AC single phase 230/ 240 volts of size 250 mm sweep with louvers shutter including anchor bolt of suitable size for fixing arrangement and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed.\n(15.00 +0)* | ITEM NO-2.032 | 15 | Each |
268 | 2.033 | S & F 4 mm dia earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.\n(26.00 + 0)* | ITEM NO-2.033 | 26 | RM |
269 | 2.034 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber with CI cover plate 10mm thick including angle iron frame , funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable\n(8.00 + 44.00)*\n | ITEM NO-2.034 | 52 | Each Set |
270 | 2.035 | S & F MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA taking down old unsv MCCB complete.\n(5.00 + 0)*\n | ITEM NO-2.035 | 5 | Each |
271 | 2.036 | S & F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA taking down old unsv MCCB complete.\n(4.00 + 0)*\n | ITEM NO-2.036 | 4 | Each |
272 | 2.037 | S & F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA taking down old unsv MCCB complete.\n(10.00 + 0)*\n | ITEM NO-2.037 | 10 | Each |
273 | 2.038 | S & F MCCB 3 Pole, 415 V, Adjustable type, 125 Amps with breaking capacity 36 KA taking down old unsv MCCB complete.\n(5.00 + 0)*\n | ITEM NO-2.038 | 5 | Each |
274 | 2.039 | S & F MCCB 3 Pole, 415 V, Adjustable type, 25 Amps to 100 Amps with breaking capacity 36 KA taking down old unsv MCCB complete.\n(4.00 + 0)* | ITEM NO-2.039 | 4 | Each |
275 | 2.04 | S & F VTPN distribution board double door 6way suitable for MCCB as incomer and MCB as outgoing including MCCB (incomer) 250 Amps, 4 pole, 25 KA, 415 Volts including taking down old unserviceable DB complete all as specified and as directed.\n(6.00 + 0)*\n | ITEM NO-2.04 | 6 | Each |
276 | 2.041 | Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 240 sq mm, 3.5 core complete . NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.\n(245.00 + 0)*\n | ITEM NO-2.041 | 245 | RM |
277 | 2.042 | All as per item No 2.041 here -in -before but with 150 Sqmm 3.5 Core \n(85.00 + 0)* | ITEM NO-2.042 | 85 | RM |
278 | 2.043 | All as per item No 2.041 here -in -before but with 120 Sqmm 3.5 Core \n(150.00 + 0)* | ITEM NO-2.043 | 150 | RM |
279 | 2.044 | All as per item No 2.041 here -in -before but with 95 Sqmm 3.5 Core \n(540.00 + 0)* | ITEM NO-2.044 | 540 | RM |
280 | 2.045 | All as per item No 2.041 here -in -before but with 70 Sqmm 3.5 Core \n(120.00 + 0)* | ITEM NO-2.045 | 120 | RM |
281 | 2.046 | All as per item No 2.041 here -in -before but with 50 Sqmm 3.5 Core \n(25.00 + 180.00)* | ITEM NO-2.04599999999999 | 205 | RM |
282 | 2.047 | All as per item No 2.041 here -in -before but with 35 Sqmm 3.5 Core \n(265.00 + 950.00)* | ITEM NO-2.04699999999999 | 1215 | RM |
283 | 2.048 | All as per item No 2.041 here -in -before but with 25 Sqmm 3.5 Core \n(60.00 + 00)* | ITEM NO-2.04799999999999 | 60 | RM |
284 | 2.049 | All as per item No 2.041 here -in -before but with 16 Sqmm 3.5/4 Core \n(255.00 + 0)* | ITEM NO-2.04899999999999 | 255 | RM |
285 | 2.05 | All as per item No 2.041 here -in -before but with 10 Sqmm 3.5/4 Core \n(250.00 + 0)* | ITEM NO-2.04999999999999 | 250 | RM |
286 | 2.051 | M&L for clean river sand cushioning under ground cable including spreading and punning down desired thickness complete all as specified ans as directed. \nNOTE:Only punned thickness shall be measured for payment purpose.\n(146.00 + 74.50)* | ITEM NO-2.05099999999999 | 220.5 | Cum |
287 | 2.052 | M&L for laying brick sub class 'B' (locally available best quality) burnt bricks for cable protection laid in dry and flat abutting each other with gaps not exceeding 10mm complete.\n(15687.00 + 8000.00)* | ITEM NO-2.05199999999999 | 23687 | Each |
288 | 2.053 | M&L for spray painting to existing panel LT Panel board (Inner& outer) with 2 coats of synthetic enamelled paint of size 2000mmx1500mmx600mm after rubbing and cleaning of existing paint all as specified and as directed. \n(10.00 +0)* | ITEM NO-2.05299999999999 | 10 | Each Job |
289 | 2.054 | M&L for Digital Voltmeter digital type 0-500 Amps with built selector switch-01 including taking down old unserviceable voltmeter all specified ansd as directed.\n(6.00 +0)* | ITEM NO-2.05399999999999 | 6 | Each |
290 | 2.055 | M&L for Digital Ammeter digital type 0-400 Amps with suitable size of CTs and inbuilt selector switch -01 No including taking down old unserviceable ammeter all specified ansd as directed.\n(6.00 + 0)* | ITEM NO-2.05499999999999 | 6 | Each |
291 | 2.056 | M&L for Phase indicator lamp neon type RYB (Set of three) -01 Set including taking down old unserviceable phase indicator lamp all specified ansd as directed.\n(27.00 + 0)* | ITEM NO-2.05599999999999 | 27 | Each |
292 | 2.057 | M&L for welding in repair n exceeding 2.5cm in length, thickness of metal to be welded exc 6mm but not exceeding 9 mm of hinges/ door panels all specified and as directed.\n(5.00 + 0)* | ITEM NO-2.05699999999999 | 5 | Each Job |
293 | 2.058 | M&L for Cable Glands made of polycarbonate/ PVC different panels (04Nos of 01 Set) all specified and as directed.\n(10.00 + 0)* | ITEM NO-2.05799999999999 | 10 | Each set |
294 | 2.059 | Supply & laying GI tubes ' light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 100 mm dia bore including taking out unsv GI tubing complete all as specified and as directed\n(15.00 + 0)*\n | ITEM NO-2.05899999999999 | 15 | RM |
295 | 2.06 | All as per item No 2.059 but of size 80mm bore.\n(30.00 + 0)* | ITEM NO-2.05999999999999 | 30 | RM |
296 | 2.061 | All as per item No 2.059 but of size 40 mm bore.\n(40.00 + 0)* | ITEM NO-2.06099999999999 | 40 | RM |
297 | 2.062 | All as per item No 2.059 but of size 25mm bore.\n(60.00 + 0)8 | ITEM NO-2.06199999999999 | 60 | RM |
298 | 2.063 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one light point controlled by one, oneway switch.\n(0 + 1988.00)* | ITEM NO-2.06299999999999 | 1988 | Per Point |
299 | 2.064 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one fan point controlled by one, one way switch.\n(0 + 540.00)* | ITEM NO-2.06399999999999 | 540 | Per Point |
300 | 2.065 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one 5/6 amps socket outlet on independent board controlled with one, one way switch.\n(0 + 664.00)* | ITEM NO-2.06499999999999 | 664 | Per Point |
301 | 2.066 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one 5/6 amps socket outlet on same board controlled with other switch.\n(0 + 340.00)* | ITEM NO-2.06599999999999 | 340 | Per Point |
302 | 2.067 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one bell point controlled by one bell push.\n(0 + 100.00)* | ITEM NO-2.06699999999999 | 100 | Per Point |
303 | 2.068 | Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one light point controlled by two nos, twoway switchs.\n(0 +22.00)8 | ITEM NO-2.06799999999999 | 22 | Per Point |
304 | 2.069 | Point wiring with 2.5 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one 15/16 Amps socket outlet point controlled by one, 15/16 A switch.\n(0 + 456.00)* | ITEM NO-2.06899999999999 | 456 | Per Point |
305 | 2.07 | Point wiring with 4 Sq. mm (nominal area) PVC insulated and un-sheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 4 Sq mm PVC insulated and un-sheathed single core FRLSH cable 1100 volts grade with multi-stranded copper conductor and connected to common earth dolly, complete for one 15/16 Amps socket outlet point controlled by one, 15/16 A switch.\n\nNote for Sl Item No. 2.063 to 2.070 :- \n(i) Modular metal flush box and white cover plate with frame shall be measured and paid separately. \n(ii) Cutting and Forming Chases in Masonry, Concrete Work, etc. including Cutting and or Leaving Holes/ Recesses, Sinking, etc. and Making Good in Cement Mortar 1:3 for filling up to 20mm and in PCC 1:2:4 (12.5mm Graded Stone Aggregate) for filling more than 20mm including matching with existing colour / paint of surfaces shall deemed to be included in the quoted rate.\n(0 + 152.00)* | ITEM NO-2.06999999999999 | 152 | Per Point |
306 | 2.071 | M&L Switch socket combination 2 in 1, 5 Amps flush type, 240 volts, ISI marked complete all as specified.\n(0 + 496.00)* | ITEM NO-2.07099999999999 | 496 | Each |
307 | 2.072 | S&F Switch piano flush type, single pole, two way, 5/6 Amps, 240 volts, ISI marked complete all as specified.\n( 0 + 38.00)8 | ITEM NO-2.07199999999999 | 38 | Each |
308 | 2.073 | S&F Modular switch 6 Amp, 240 Volts, single pole, one way, ISI marked complete all as specified and as directed.\n(0 + 936.00)* | ITEM NO-2.07299999999999 | 936 | Each |
309 | 2.074 | S&F Modular bell push 6Amp, 240 volts & one modular complete all as specified.\n(0 + 12.00)* | ITEM NO-2.07399999999999 | 12 | Each |
310 | 2.075 | S&F Modular switch 16 Amp, 240 volts, single pole, one way, ISI marked complete all as specified and as directed.\n(0 + 132.00)* | ITEM NO-2.07499999999999 | 132 | Each |
311 | 2.076 | S&F Modular switch 6 Amp, 240 volts, single pole, two way, ISI marked complete all as specified and as directed.\n(0 + 44.00)* | ITEM NO-2.07599999999999 | 44 | Each |
312 | 2.077 | S&F Modular socket 6 Amp, 2/3 pin combined, 2 modulae, 240 volts, ISI marked complete all as specified and as directed.\n(0 + 240.00)* | ITEM NO-2.07699999999999 | 240 | Each |
313 | 2.078 | S&F Modular socket 6Amp /16 Amp, 2/3 pin combined, 2 modulae, 240 Volts, ISI marked complete all as specified and as directed.\n(0 + 132.00)* | ITEM NO-2.07799999999999 | 132 | Each |
314 | 2.079 | S&F Metal flush box modular with white cover plate with frame (both inner plate & outer plate cover) modular for 1 module.\n(0 + 6.00)* | ITEM NO-2.07899999999999 | 6 | Each |
315 | 2.08 | S&F Metal flush box modular with white cover plate with frame (both inner plate & outer plate cover) modular for 2 module.\n(0 + 12.00)* | ITEM NO-2.07999999999999 | 12 | Each |
316 | 2.081 | S&F Metal flush box modular with white cover plate with frame (both inner plate & outer plate cover) modular for 3 module.\n(0 + 132.00)* | ITEM NO-2.08099999999999 | 132 | Each |
317 | 2.082 | S&F Metal flush box modular with white cover plate with frame (both inner plate & outer plate cover) modular for 4 module.\n(0 + 24.00)* | ITEM NO-2.08199999999999 | 24 | Each |
318 | 2.083 | S&F Metal flush box modular with white cover plate with frame (both inner plate & outer plate cover) modular for 6 module.\n(0 + 12.00)* | ITEM NO-2.08299999999999 | 12 | Each |
319 | 2.084 | S&F Metal flush box modular with white cover plate with frame (both inner plate & outer plate cover) modular for 8 module.\n(0 + 48.00)* | ITEM NO-2.08399999999999 | 48 | Each |
320 | 2.085 | S & F 18W LED, 4', Wall mounted LED batten and tube, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and as directed.\n(0 + 972.00)*\n | ITEM NO-2.08499999999999 | 972 | Each |
321 | 2.086 | S & F 05 W LED, 2' wall mounted polycarbonate batten internally pre-wired with electrinic driver and polycarbonate diffuser with minimum system efficacy 100 lumens/watt and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sqmm 3 Core from ceiling roase to the light fitting including taking down old unserviceable light fitting complete all as specified and directed.\n(0 + 112.00)* | ITEM NO-2.08599999999999 | 112 | Each |
322 | 2.087 | S & F in replacement decorative wall mounted light fitting made up of polycarbonate including 9 W LED lamp with B-22 base including taking down old unserviceable holder fitting.\n(0 + 524.00)* | ITEM NO-2.08699999999999 | 524 | Each |
323 | 2.088 | S & F Bldg security LED 1x9 W light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos. 10 mm dia including drilling hole as required and connecting up with flexible copper cable of size 0.75 Sqmm 3 core from ceiling rose to the light fitting including taking down old unserviceable light fitting\n(0 + 44.00)* | ITEM NO-2.08799999999999 | 44 | Each |
324 | 2.089 | S & F Bed side light metal body fitting with 3 W LED lamp including all accessories.\nMake: Philips Cat part No. 919215850324 LED or as equivalent in specified makes\n(0 + 48.00)* | ITEM NO-2.08899999999999 | 48 | Each |
325 | 2.09 | Supply and fixing BLDC exhaust fan 200 mm (min) sweep polycarbonate blades with built in louvers, AC single phase 230 volts, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75sqmm copper conductor from celing rose complete all as specified and as directed.\n(0 + 188.00)* | ITEM NO-2.08999999999999 | 188 | Each |
326 | 2.091 | S & F for MCB Distribution board double door type SPN 12 way, sheet steel, powder coated, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.\n(0 + 24.00)*\n | ITEM NO-2.09099999999999 | 24 | Each |
327 | 2.092 | S & F AC starter motor single pole 25 Amps 230 Volt flush type \n(0 + 152.00)* | ITEM NO-2.09199999999999 | 152 | Each |
328 | 2.093 | Supply, laying and testing of 32 mm nominal diameter High density polyethylene pipes (HDPE) of pressure rating PN4 as per IS : 14333 : 1996 laid in trenches complete all as specified and as directed.\n(0 + 66.00)* | ITEM NO-2.09299999999999 | 66 | RM |
329 | 2.094 | Supply, laying and testing of 40 mm nominal diameter High density polyethylene pipes (HDPE) of pressure rating PN4 as per IS : 14333 : 1996 laid in trenches complete all as specified and as directed.\n(0 + 66.00)* | ITEM NO-2.09399999999999 | 66 | RM |
330 | 2.095 | S & F Distribution board flush type for connection of cable TV socket including with PVC conduit pipe and wall chasis cutting making good the disturbed surface including all accessories etc complete all as specified and directed.\n(0 + 88.00)* | ITEM NO-2.09499999999999 | 88 | Each |
331 | 2.096 | S & F Distribution board flush type for connection of Telephone socket including with PVC conduit pipe and wall chasis cutting making good the disturbed surface including all accessories etc complete all as specified and directed.\n(0 + 88.00)* | ITEM NO-2.09599999999999 | 88 | Each |
332 | 2.097 | M & L for cutting/digging of existing hard surface of cement concrete/bituminous road of size not less than 45cm in width and 20cm deep for laying of GI/CI pipe and making good to disturbed surface by providing PCC or same material after laying pipe line including returning filling complete all as specified and directed.\n(0 + 42.00)* | ITEM NO-2.09699999999999 | 42 | RM |
333 | 2.098 | M & L for distribution board double door type (for incoming MCCB 100 Amps 4Pole & out going MCBs) DPX 8 ways, steel sheet, powder painted, with bus bar neutral link & earth bar etc. and including taking down old unserviceable DB of any capacity.\n(0 + 3.00)* | ITEM NO-2.09799999999999 | 3 | Each |
334 | 2.099 | M & L for distribution board double door type (for incoming MCCB 63 Amps 4Pole & out going MCBs) DPX 4 ways, steel sheet, powder painted, with bus bar neutral link & earth bar etc. and including taking down old unserviceable DB of any capacity.\n(0 + 19.00)* | ITEM NO-2.09899999999999 | 19 | Each |
335 | 2.1 | S & F MCCB 4 Pole, 415 V, Adjustable type, 63 Amps with breaking capacity 16 KA including taking down old unsv MCCB complete.\n(0 + 19.00)*\n | ITEM NO-2.09999999999999 | 19 | Each |
336 | 2.101 | S & F MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA including taking down old unsv MCCB complete.\n(0 + 3.00)*\n | ITEM NO-2.10099999999999 | 3 | Each |
337 | 2.102 | M & L boring of holes under road pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 100mm dia suitable for 0.4 Mpa working pressure for laying cable across the road complete.\n(0 + 30.00)* | ITEM NO-2.10199999999999 | 30 | RM |
338 | 2.111 | Note: * is quantity for OTM ACCN at CORPS HQ and MD ACCN at RMS (PH-I of two) respectively | |||
339 | 3 | Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail