Military Engineer Services-MES has published Repair Renewal To Control Panels Centrifugal Submersible Jet Pump Sets Of Various Capacity And Alied Works At Water Supply Installations Including Repairs Replacement Weilding Painting Lettering Services To Existing Lt Panel Feeder Boxes. Submission Date for this Tender is 29-07-2021. Feeder Pillar Tenders in Arakkonam Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-07-2021 |
| Name of Work: REPAIR / RENEWAL TO CONTROL PANELS , CENTRIFUGAL/ SUBMERSIBLE/ JET PUMP SETS OF VARIOUS CAPACITY AND ALIED WORKS AT WATER SUPPLY INSTALLATIONS INCLUDING REPAIRS / REPLACEMENT / WEILDING / PAINTING / LETTERING SERVICES TO EXISTING LT PANEL FEEDER BOXES, POLES AND ALLIED ITEMS UNDER GE (M) ARAKKONAM (TENDER ID NO. 2021_MES_456811_1) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Material and labour for taking down and dismantling centrifugal pumpset/ Jet pump of following capacity for carrying out repairs including replacement of worn out parts such as impellers, bearings etc., and reconditioning of spare parts such as shaft, gland metal bushes, impeller housing body, gland plate etc., by metalling and machining to their original shape and size and assembling back into position by using new suitable gland dory, gland plate, gland /rubber packing including studs/ gland bolts and nuts, coupling bushes etc., oiling and greasing for making pumpset fully functional and testing for satisfactory running for the following capacities complete all as specified and as directed.\nNOTE: (i) Rate quoted deemed to include labour cost for taking down, repair and replacement of spares.\n(ii) The spare parts to be replaced will be measured and paid separately as supply only under relevant items of sch 'A' here-in-after. | |||
| 2 | 1.01 | Upto 2 HP | 5 | Each Job | |
| 3 | 1.02 | 3 HP | 1 | Each Job | |
| 4 | 1.03 | 4HP/5 HP | 2 | Each Job | |
| 5 | 1.04 | 15 HP | 1 | Each Job | |
| 6 | 1.05 | 20 HP | 2 | Each Job | |
| 7 | 1.06 | 40 HP | 4 | Each Job | |
| 8 | 2 | Material and labour for dismantling submersible /open well submersible pumpset, carrying out repairs, reconditioning of spare parts such as impellers, thrust bearing with plate, shaft etc., by metalling and machining to their original shape and size, assembling back into position by using new suitable gland/ rubber packing including studs, flanges, bolts and nuts etc., oiling and greasing for making pumpset fully functional, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, testing for satisfactory running for the following capacities complete all as specified and as directed.\nNOTE: (i) Rate quoted deemed to include Material and labour cost for repair and replacement of spares.\n(ii) The labour cost for lifting and lowering complete pump will be measured and paid separately under relevant items of sch 'A' here-in-after. | |||
| 9 | 2.01 | Upto 3 HP single Phase | 2 | Each Job | |
| 10 | 2.02 | 4HP/5 HP | 3 | Each Job | |
| 11 | 2.03 | 7.5 HP | 4 | Each Job | |
| 12 | 2.04 | 9 HP/ 10 HP | 2 | Each Job | |
| 13 | 2.05 | 15HP/ 16 HP | 1 | Each Job | |
| 14 | 2.06 | 17.5 / 20 HP | 1 | Each Job | |
| 15 | 3 | Supply only DE/ NDE bearings for the following capacity centrifugal pump/ jet pump complete all as specified and as directed.\nMake of bearing: TATA/ SKF/ NBC | |||
| 16 | 3.01 | Upto 2 HP | 7 | Each | |
| 17 | 3.02 | 3 to 5 HP | 3 | Each | |
| 18 | 3.03 | 7.5 to 10 HP | 7 | Each | |
| 19 | 3.04 | 15 to 20 HP | 2 | Each | |
| 20 | 3.05 | 40 HP | 3 | Each | |
| 21 | 4 | Supply only gun metal impeller for the following capacity centrifugal pump/ jet pump complete all as specified and as directed. | |||
| 22 | 4.01 | Upto 2 HP | 7 | Each | |
| 23 | 4.02 | 3 to 5 HP | 3 | Each | |
| 24 | 4.03 | 7.5 to 10 HP | 4 | Each | |
| 25 | 4.04 | 15 to 20 HP | 2 | Each | |
| 26 | 4.05 | 40 HP | 2 | Each | |
| 27 | 5 | Supply only shaft suitable for the following capacity pumps complete all as specified and as directed.\nNOTE: for serial item No. 3 to 5 (i) labour cost for taking down old unserviceable item and fixing of above items No. 03 to 05shall deemed to be included in rate quoted for item No.01 here-in-before. | |||
| 28 | 5.01 | Shaft suitable for upto 2 HP Capacity Pump | 7 | Each | |
| 29 | 5.02 | Shaft suitable for upto 3 to 5 HP Capacity Pump | 3 | Each | |
| 30 | 5.03 | Shaft suitable for upto 7.5 to 10 HP Capacity Pump | 4 | Each | |
| 31 | 5.04 | Shaft suitable for 15 to 20 HP Capacity Pump | 2 | Each | |
| 32 | 5.05 | Shaft suitable for 40 HP pump | 2 | Each | |
| 33 | 6 | Material and labour for taking down and dismantling/ opening the following capacity centrifugal/ Jet motor and taking out damaged/ burnt out winding from single phase /three phase motor, cleaning the slots with CTC and rewinding the same with new super enamelled copper winding wire of existing gauge and turns, reassembling, oiling and greasing, and fixing back into position for making motor fully functional and testing for satisfactory running complete all as specified and as directed. | |||
| 34 | 6.01 | Upto 3 HP single Phase | 5 | Each Job | |
| 35 | 6.02 | 4HP/ 5 HP 3Ph | 2 | Each Job | |
| 36 | 6.03 | 7.5 / 10 / 15 HP, 3Ph | 8 | Each Job | |
| 37 | 6.04 | 20 HP, 3Ph | 2 | Each Job | |
| 38 | 6.05 | 40 HP, 3Ph | 3 | Each Job | |
| 39 | 7 | Material and labour for taking up and dismantling/ opening up submersible /open well submersible motor of following capacities and taking out burnt single phase /three phase winding, cleaning the slots with CTC and rewinding the same with new PVC insulated copper winding wire of existing gauge and turns, assembling back into position by using new suitable studs etc., oiling and greasing and fixing back into position for making motor fully functional, testing for satisfactory running complete all as specified and as directed.\nNOTE: (i) Rate quoted deemed to include Supply and fix all spare parts required for replacement.\n(ii) labour cost lifting/ lowering shall be measured and paid separately. | |||
| 40 | 7.01 | 2HP to 3 HP, 3Ph | 2 | Each Job | |
| 41 | 7.02 | 4HP to 5 HP, 3Ph | 3 | Each Job | |
| 42 | 7.03 | 6HP to 7.5 HP, 3Ph | 4 | Each Job | |
| 43 | 7.04 | 9 to10HP, 3Ph | 2 | Each Job | |
| 44 | 7.05 | 15 HP, 3Ph | 1 | Each Job | |
| 45 | 7.06 | 17.5 HP, 3Ph | 1 | Each Job | |
| 46 | 8 | Material and labour for taking up /lifting submersible pumpset of upto 7.5 HP capacity from open well/ bore well using tripod chain pulley or any other suitable method, dismantling from MS /GI /HDPE pipe any size, opening pump set and carrying for repairs connecting back to pipe and lowering the submersible pumpset into open well/ bore well in original position after repairs complete all as specified and as directed. | 210 | RM | |
| 47 | 9 | Material and labour for taking up/ lifting for taking out submersible pumpset of 9 to 17.5 HP capacity from open well/ bore well using tripod chain pulley or any other suitable method, dismantling from MS/ GI/ PVC pipe of any size, opening pump set and carrying for repairs connecting back to pipe and lowering the submersible pumpset into open well/ bore well in original position after repairs complete all as specified and as directed.\nNote for item No. 8 & 9:\n(a) Unit rate quoted deemed to include labour cost including T&P for taking up and lowering the submersible pump from bore well /open well along with delivery pipe.\n(b) Cost for repair work and replacement of spares will be measured and paid separately under relevant items of schedule. | 260 | RM | |
| 48 | 10 | Taking down existing unserviceable sluice valve of following sizes from the existing position and supply and fixing sluice valve CI body class PN 1.6 heavy duty flanged ends cast iron wheel with SS spindle conforming to IS:14786–2000, short body including replacement of corroded nuts, bolts, washers and gasket complete all as specified and as directed. | |||
| 49 | 10.01 | 100mm dia | 2 | Each | |
| 50 | 10.02 | 150mm dia | 4 | Each | |
| 51 | 10.03 | 200mm dia | 2 | Each | |
| 52 | 10.04 | 300mm dia | 3 | Each | |
| 53 | 11 | Material and labour for opening the top of the sluice valve of the following sizes carefully and taking out the gate including spindle and checknut scrapping/ cleaning refacing, regrinding of gate of sluice valve and spindle, refixing the spindle, gate check nut and top of sluice valve including repacking stuffing box of sluice valve spindle by replacement of gland packing rope of suitable size and reassembling including replacement of rubber gasket, bolts, nuts, etc., and making the sluice valve serviceable complete all as specified and as directed.\nNOTE: (i) Rate quoted deemed to include Material and labour cost for repair to sluice valve.\n(ii) Rubber gasket, bolts, nuts shall be measured and paid separately as supply only under relevant items of schedule here-in-after. | |||
| 54 | 11.01 | 100mm dia | 3 | Each Job | |
| 55 | 11.02 | 150mm dia | 5 | Each Job | |
| 56 | 11.03 | 200mm dia | 4 | Each Job | |
| 57 | 11.04 | 300mm dia | 3 | Each Job | |
| 58 | 12 | Supply and fixing Non return valve 100mm dia, cast iron, PN-1.6 class with flanged ends with bypass arrangement at both sides complete fitted with GI pipe including connected accessories and joining materials complete all as specified and as directed.\nMAKE: Kirlosker /Upadhyaya /RMCO | 3 | Each | |
| 59 | 13 | All as per item No.12 here-in-before but Non return valve of size 50mm dia. | 4 | Each | |
| 60 | 14 | All as per item No.12 here-in-before but Non return valve of size 150mm dia. | 2 | Each | |
| 61 | 15 | Taking down the existing unserviceable hand pump from tube/ bore well by disconnecting mechanically and kept at site and lifting the connection rod along with column pipe from bore hole and segregating components for carring out repair work including replacement of unserviceable chain along with chain link and plunger with nylon washers and lowering in the bore well and refixing the pump in its position complete all as specified and as directed.\nNote: Rate quoted includes labour cost lifting /lowering of pipe. | 2 | Each Job | |
| 62 | 16 | Development of bore /tube well using conventional method by means of air compressor of capacity not less than 600cfm at 150 PSI and at least 4 hours minimum, for sand /mud free clean water is obtained including necessary transportation, labour and fuel etc., complete all as specified and as directed. | 3 | Each Job | |
| 63 | 17 | Material and labour to carry out yield test on bore well by making free, unrestrained flow of water from a borewell continuously using pump for at least one hour over a 90 degree ‘V’ notch and measuring and recording pumping rate accurately at uniform interval and preparing and submitting yield test result and shut down the pump at the end of the test (a minimum of 60 minutes of pumping) complete all as specified and as directed.\nNote: (a) Unit rate quoted deemed to include necessary labour cost including necessary T&P for yield test.\n(b) Test to be carried out by competent authority/ agency and result /report prepared by them to be submitted. | 4 | Each Job | |
| 64 | 18 | Taking down the existing unserviceable DOL starter from existing location and supply and fix submersible motor starter /controller suitable for the folowing capacity submersible pump set complete all as specified and as directed.\nMake: Siemens /L&T /BCH | |||
| 65 | 18.01 | Upto 2 HP submersible single phase pump | 5 | Each | |
| 66 | 18.02 | 3 to 5 HP submersible 3 phase pumpwith single phase preventer | 8 | Each | |
| 67 | 18.03 | Upto 7.5 HP submersible 3 phase pump. | 5 | Each | |
| 68 | 19 | Supply and fix terminal plate with MS cover suitable for the folllowing capacity motors of any make complete all as specified and as directed. | |||
| 69 | 19.01 | 0.5 to 5 HP Capacity Motor | 4 | Each | |
| 70 | 19.02 | 7.5 to 10 HP Capacity Motor | 5 | Each | |
| 71 | 19.03 | 15 to 17.5 HP Capacity Motor | 3 | Each | |
| 72 | 19.04 | 40 HP Capacity Motor | 2 | Each | |
| 73 | 20 | Supply only the following items complete all as specified and as directed. | |||
| 74 | 20.01 | Foot valve leather suitable for 150mm dia foot valve size of 1'x1', 6mm thick | 20 | Each | |
| 75 | 20.02 | CI foot valve 150mm dia (6 to 8 holes) along with flange, bolt and nuts with washers \nMAKE: Kirlosker/ L&T/ Kartar | 2 | Each | |
| 76 | 20.03 | Gland rope size of 10 to 16mm. | 16 | KG | |
| 77 | 20.04 | GI bolt and nuts with double washers in different sizes. | 40 | KG | |
| 78 | 21 | Supply and fixing pressure gauge (Scale 0 to 10 kg/cm2) suitable for 20/40 HP centrifugal pump set without any leak along with connected items including taking down old unserviceable one complete all as specified and as directed. | 8 | Each | |
| 79 | 22 | Material and labour for preparing the surface of MS pipe line, valve chamber door and panel board and painting with two coat of synthetic enamel paint of existing colour including scrapping out of old fadded paint and writing the SM/ MES. No on plant complete all as specified and as directed. | 230 | Sqm | |
| 80 | 23 | Supply and fix contactor 3 pole with AC1 duty coil 65 Amps AC-1 duty rating at 415V, 50Hz, power poles 3 auxillary contact arrangement NO/ NC suitable for 40 HP and taking down the existing unserviceable one complete all as specified and as directed.\nMake: BCH/ Siemens/ L&T/ Schneider | 3 | Each Job | |
| 81 | 24 | Supply and fix contactor 3 pole with AC1 duty coil 18 Amps AC-1 duty rating at 415V, 50Hz, power poles 3 auxillary contact arrangement NO/ NC suitable for 10 HP and taking down the existing unserviceable one complete all as specified and as directed.\nMake: BCH /Siemens /L&T/ Schneider | 3 | Each Job | |
| 82 | 25 | Supply and fix ball brass valves size of 25mm dia high prerssure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed including taking down old unserviceable one complete all as specified and as directed. | 14 | Each | |
| 83 | 26 | Supply and fix ball brass valves size of 20mm dia high prerssure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed including taking down old unserviceable one complete all as specified and as directed. | 18 | Each | |
| 84 | 27 | Supply and lay GI tubing of following size medium grade galvanised with all fittings specials such as bend, elbows, tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc., laid walls and ceilings/ floors complete all as specified and as directed.\nMake: Jindal /Tata /Surya/ Prakash | |||
| 85 | 27.01 | 50mm bore of pipe | 18 | RM | |
| 86 | 27.02 | 25mm bore of pipe | 24 | RM | |
| 87 | 27.03 | 40mm bore of pipe | 12 | RM | |
| 88 | 27.04 | 80mm bore of pipe | 6 | RM | |
| 89 | 28 | Supply and lay GI tubing of following size medium grade galvanised with all fittings specials such as bend, elbows, tees, short pieces connection, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trench complete all as specified and as directed.\nMake: Jindal /Tata /Surya/ Prakash | |||
| 90 | 28.01 | 50mm bore of pipe | 30 | RM | |
| 91 | 28.02 | 25mm bore of pipe | 24 | RM | |
| 92 | 28.03 | 40mm bore of pipe | 12 | RM | |
| 93 | 28.04 | 80mm bore of pipe | 12 | RM | |
| 94 | 29 | Supply and fix gun metal gate /globe valve of following size with iron wheel, screwed both ends for iron pipes complete all as specified and as directed.\nMake: Kirloskar /Leader/ L&T | |||
| 95 | 29.01 | 25mm bore of pipe | 10 | Each | |
| 96 | 29.02 | 20mm bore of pipe | 12 | Each | |
| 97 | 29.03 | 15mm bore of pipe | 8 | Each | |
| 98 | 29.04 | 50mm bore of pipe | 10 | Each | |
| 99 | 30 | Taking down the existing unserviceable star delta starter from existing location and supply and fix with submersible motor starter /controller suitable for the folowing capacity submersible pump set complete all as specified and as directed.\nMake: Siemens /L&T/ BCH | |||
| 100 | 30.01 | 10 HP to 15 HP submersible 3 phase pump | 4 | Each | |
| 101 | 30.02 | 17.5 / 20 HP submersible 3 phase pump | 3 | Each | |
| 102 | 31 | Taking down unserviceable love joy metal coupling L-190 from 20 HP pump set and supply and fix love joy metal coupling complete set including making hole and key hole with new key complete all as specified and as directed. | 2 | Each job | |
| 103 | 32 | Taking down unserviceable love joy metal coupling L-225 from 40 HP pump set and supply and fix love joy metal coupling complete set including making hole and key hole with new key complete all as specified and as directed. | 2 | Each job | |
| 104 | 33 | Supply and fixing rotational moulded polyethylene water storage three layered tanks 500 Litres capacity (Cylindrical vertical with closed top) hoisted and fixed in position including taking down old unserviceable /damaged one complete all as specified and as directed. | 3 | Each | |
| 105 | 34 | Taking down centrifugal pump 20 HP and dismantling for replacement of pump casing including supply of pump casing suitable for 20 HP centrifugal pump and assembling all retrieved parts with new casing and fixing in position and testing for satisfactory functioning complete all as specified and as directed. | 1 | Each job | |
| 106 | 35 | Supply and fix out door type centrifugal/ Jet pump controller (DOL Starter) suitable for pump upto 3HP, 440V, 50 Hz and consisting of indication lamp, Volt meter, Ammeter and MCB upto 32A 'C' curve complete in and including outdoor type weather proof enclosure made of 3mm thick CRCA sheet powder coated complete of suitable size with front opening door including locking arrangement and mounting legs made of MS angle including necessary PCC foundation, earthwork, powder coated paint etc., complete all as specified and as directed. | 3 | Each job | |
| 107 | 36 | Supply and fix out door type centrifugal/ Jet pump controller (DOL Starter) suitable for pump upto 7.5HP, 440V, 50 Hz and consisting of indication lamp, Volt meter, Ammeter and MCB upto 32A 'C' curve complete in and including outdoor type weather proof enclosure made of 3mm thick CRCA sheet powder coated complete of suitable size with front opening door including locking arrangement and mounting legs made of MS angle including necessary PCC foundation, earthwork, powder coated paint etc., complete all as specified and as directed. | 3 | Each job | |
| 108 | 37 | Supply and lay /lowering PVC insulated stranded copper conductor cable flat type water proof 3 core 1100 voltage grade of following sizes suitable for submersible pumpset complete all as specified and as directed. | |||
| 109 | 37.01 | 2.5 sqmm suitable for submersible pumpset | 30 | RM | |
| 110 | 37.02 | 6 sqmm suitable for submersible pumpset | 40 | RM | |
| 111 | 37.03 | 10 sqmm suitable for submersible pumpset | 60 | RM | |
| 112 | 38 | Supply, Install, Testing and commissioning of indoor type cubical panel board self supporting totally enclosed CPRI certified factory fabricated LT feeder pillar box, made out of 2mm thick CRCA sheet steel, dust and vermin proof, hinged front opening double door shutters with neoprene rubber gasket, powder coated including danger plate, Provn of connection of GI earth strip 32x6mm size - 02 Nos, ventilation louvers, bottom detatchable gland plate complete cubicle panel board suitable for 3 phase, 4 wire, 415 volts 50 HZ and 50x50x6mm angle iron base frame, with locking arrangement, including provision of suitable size PCC pedestal for mounting of panel board in and including the following switch gear and necessary internal wiring and connections from bus bar to switch gear complete all as specified and as directed.\n(a) MCCB, 4 pole, 100 Amps 25 KA -01 No(I/C)\n(b) MCB, 3 pole, 63 Amps 'C' series- 06 Nos\n(c) Provision of DOL starter suitable for 7.5 HP submersible pump along with single phase preventer - 2 Nos\n(d) Provision of DOL starter suitable for 5HP submersible pump along with single phase preventer - 4 No\n(e) LED Phase Indication Lamp- Set of three\n(g) Volt Meter Analog Type 0-500 Volt\n(h) Ammeter Analog Type 0-200 Amps, with CT and selector switch\n(j) Bus Bar Aluminium 200 Amps Rating 4 pole | 1 | Each job | |
| 113 | 39 | Supply and lay GI tubing 40mm, light grade galvanised with all fittings laid on walls and ceilings/ floors complete for cable /strip protection including necessary clamps complete all as specified and as directed. | 24 | RM | |
| 114 | 40 | Supply and lay GI tubing 40mm, light grade galvanised with all fittings laid in trench complete for cable protection complete all as specified and as directed.\nNote: Earth work shall be measured and paid separately under relevant items of sch 'A'. | 34 | RM | |
| 115 | 41 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth for taking up/ laying cable, pipes etc., and getting out for soft/loose soil complete all as specified and as directed. | 10 | Cum | |
| 116 | 42 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm for soft/loose soil complete all as specified and as directed. | 9 | Cum | |
| 117 | 43 | Removing excavated material to distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed. | 1 | Cum | |
| 118 | 44 | Material and labour for earthing complete with GI earth plate electrode of size 600x600x6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below normal ground level, with top edge of the earth plate at a depth of not less than 1.5m below ground connected to GI earth strip 32x6mm by means of GI bolts and nuts, washers and GI earth strip protected by GI pipe light grade 40mm bore upto 7.5m and connecting to LT switch gear panel etc., as per site requirement including necessary excavation, earth work in any type of soil, PCC 1:3:6 type C-1 earth chamber, 40mm thick RCC cover with 6mm dia MS bars 10cm c/c on both ways as reinforcement complete all as shown in electrical plate No 3 of MES Schedule Part 1 connected to earthing test points complete all as specified and as directed.\nNote: (i) Quoted rate deemed to include necessary earth work, PCC chamber, RCC cover, reinforcement, removal of surplus soil, site clearance etc.,\n(ii) GI earth strip 32x6mm, GI tubing light grade 40mm bore upto 7.5m deemed to be included in the rate quoted by the contractor.\n(iii) Beyond 7.5m the GI earth strip 32x6mm and GI pipe light grade 40mm bore shall be measured under relevant item of the schedule. | 4 | Each | |
| 119 | 45 | Supply and fix on pole /buried in ground earth continuity conductor GI strip 32x6mm fixed to wall on batten or buried in ground or drawn in conduit /pipe or fixed to poles complete all as specified and as directed. | 16 | RM | |
| 120 | 46 | Supply and fix for MCCB 4 Pole, 415 V, Adjustable Thermal and fixed Magnetic release 125 Amp with breaking capacity 25 KA complete all as specified and as directed.\nNote: Including taking down old unserviceable. | 2 | Each | |
| 121 | 47 | All as per item No.46 here-in-before but MCCB 4 Pole, 415 V, Adjustable Thermal & fixed Magnetic release 200 Amp with breaking capacity 25 KA. | 2 | Each | |
| 122 | 48 | All as per item No.46 here-in-before but MCCB 4 Pole, 415 V, Adjustable Thermal & fixed Magnetic release 100 Amp with breaking capacity 25 KA. | 3 | Each | |
| 123 | 49 | All as per item No.46 here-in-before but MCCB 4 Pole, 415 V, Adjustable Thermal & fixed Magnetic release 160 Amp with breaking capacity 25 KA. | 1 | Each | |
| 124 | 50 | Supply and fixing MCB 4 pole, 415 Volts 40 to 63 Amps, 'C' series including taking down old unserviceable complete all as specified and as directed. | 3 | Each | |
| 125 | 51 | Supply and fixing MCB 4 pole, 415 Volts 6-32 Amps'C' series including taking down old unserviceable complete all as specified and as directed. | 4 | Each | |
| 126 | 52 | Material and labour for preparing the old surface of centrifugal pump with motor of following capacity and painting with two coat of synthetic enamel paint of approved tint including scrapping out of old fadded paint and writing the SM/MES No. complete all as specified and as directed. | |||
| 127 | 52.01 | Upto 2 HP single Phase | 5 | Each Job | |
| 128 | 52.02 | 3 HP, 3Ph | 1 | Each Job | |
| 129 | 52.03 | 4HP/5 HP 3Ph | 1 | Each Job | |
| 130 | 52.04 | 15 HP, 3Ph | 1 | Each Job | |
| 131 | 52.05 | 20 HP, 3Ph | 2 | Each Job | |
| 132 | 52.06 | 40 HP, 3Ph | 4 | Each Job | |
| 133 | 53 | Taking down existing rusted /corroded pump set from foundation by disconnecting eletrically/mechanically and kept at site and removing corroded/ damaged mild steel foundation frame and replace with new MS frame as per existing gauge and size upto 15HP capacity motor including replacement of bolts,nuts with washers and applying two coats of synthetic enamel paint over a coat of red oxide primer of existing colour shades complete all a specified and directed | 5 | Each Job | |
| 134 | 54 | Taking down existing rusted /corroded pump set from foundation by disconnecting eletrically/mechanically and kept at site and removing corroded/ damaged mild steel foundation frame and replace with new MS frame as per existing gauge and size upto 40HP capacity motor including replacement of bolts,nuts with washers and applying two coats of synthetic enamel paint over a coat of red oxide primer of existing colour shades complete all a specified and directed | 2 | Each Job | |
| 135 | 55 | Taking out the existing DOL starter from panel upto 7.5HP capacity motor ,cleaning the electronic parts from inside,replacing the unserviceable items Single phase preventor,OLR,contacor,NVC,NONC and any other connected items etc.,complete all as specified and directed. | 8 | Each Job | |
| 136 | 56 | Taking out the existing star delta starter from panel ,cleaning the electronic parts from inside,replacing the unserviceable items Single phase preventor,OLR,contacor,NVC,NONC ,connecting links and any other connected items etc.,of the following capacity complete all as specified and directed. | |||
| 137 | 56.01 | 10HP Capacity | 3 | Each Job | |
| 138 | 56.02 | 15HP to 20 HP Capacity | 2 | Each Job | |
| 139 | 57 | Material and labour for preparation of old plastered or unplastered cemented surface and applying two coat of white wash on cemented surface/wall etc complete all as specified | 250 | Sqm | |
| 140 | 58 | Material and labour for Earthing complete with using GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level, with top edge of the earth plate at a depth of not less than 1.5 mtr below ground and connected to GI earth wire 4 mm by means of GI bolts and nuts,check nuts,washers and GI earth wire protected by GI pipe light grade 15 mm bore and connecting to Panel/DBs etc as per site requirement including alternate layers of charcoal & salt crystal, including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 for earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete incl watering pipe 20mm dia medium grade with funnel complete with mesh all as shown in electrical plate No. 3 of MES Schedule Part I complete including testing on completion all as specified and as directed . \n | 10 | Each Job | |
| 141 | 58.01 | Note :- (i) Quoted rate deemed to include necessary earth work, PCC chamber, RCC cover, reinforcement, removal of surplus soil, site clearance etc. (ii) GI earth wire, GI tubing light grade 15mm bore upto 7.5 mtr deemed to be included in the rate quoted by the contractor.(iii) Quotated rate include testing after completion from test point and the desired earth resistance shall be not more than 2 ohm .If the desired result is not obtained the earthing will be re done by the contractor at no extra cost. | |||
| 142 | 59 | Material and labour for painting to existing LT feeder pillar box/panel boards after preparing/ scraping the surface with emery sheet in all respect for making smooth surface including painting with two coat of exterior enamel paint water proof suitable for existing LT feeder pillar box/panel board surfaces including writing in coming and out going details as per site requirement and as specified complete all as specified and as directed.\nNote: White washing to copping/pedestal of LT feeder pillar box / panel board shall be measured and paid separately. | 450 | Sqm | |
| 143 | 60 | Material and labour for welding works to existing LT feeder pillar box/panel board doors including removing broken hinges and supply and fixing new heavy duty hinges as per existing type and qty including writing in coming and out going details as per site requirement and painting with synthetic enamel paint over redoxide on the welded surfaces to make good the disturbed surface and match with existing tint complete all as specified and as directed. | 30 | Per Door | |
| 144 | 61 | M & L for cleaning and servicing of complete panel with following capacity ACBs, contacts and busbars connections with CRC spray, checking the bus bar connections /power cable from main bus bar to MCCBs and out going cable coonections of MCCB, tightening of all bolts,nuts at power cables/ bus bar/ outgoing cables including replacement of burnt copper/ aluminium lugs as per site requirement, removing the carbon deposit and reconditioning of door lock complete all as specified and as directed . | |||
| 145 | 61.01 | Panel with ACB capacity upto 630 Amps | 12 | Each Job | |
| 146 | 61.02 | Panel with ACB capacity above 630 and upto 1250 Amps | 6 | Each Job | |
| 147 | 62 | Taking down existing defective panel board indication lamp(R /Y /B colour) from the panel and replaced with LED indicator lamp complete all as specified and as directed | 15 | Each Job | |
| 148 | 63 | Taking out the existing defective VAF meter from the panel board and replace with new VAF meter, class 1, with LED display, for showing voltage, Amps, frequency including necessary wiring and wiring materials complete all as specified and directed. | 8 | Each Job | |
| 149 | 64 | Material and labour for writing in-coming and out-going details in LT/HT panels as per site requirement, with letter height not less than 30mm, boldly and solidly with thin self adhesive sticker of approved tint complete all as specified and as directed \n | 3000 | Each letter | |
| 150 | 65 | Material and labour for dismantling, taking down, checking, cleaning and servicing of switch gear of rating 315 A to 400 A MCCB any type contacts with CRC spray including checking the bus bar connections / power cable from Main Bus bar to MCCB and out going cable connections of MCCB, tightening of incomming and outgoing cables including replacement of Copper /Aluminium lugs as per site requirements including removing the carbon deposit and replacing the gasket of compartment door, reconditioning of door lock complete all as specified and as directed \n | 2 | Each Job | |
| 151 | 66 | All as per item No.65 here-in-before but for switch gear of rating 200A to 250 A MCCB any type.\n | 5 | Each Job | |
| 152 | 67 | All as per item No.65 here-in-before but for switch gear of rating 63A to 160A MCCB any type.\n | 5 | Each Job | |
| 153 | 68 | Material and labour for writing pole number on any type of pole, painted with thick paint, bold and solid with white colour letters over black colour circular base complete all as specified and as directed . | 500 | Each Pole | |
| 154 | 69 | Material and labour for servicing, overhauling, caliberation, conditioning, repairing, cleaning to old/ unserviceable PV cell system, charge controller system complete of stand alone solar street light system as per site requirement to make functioning of PV cell system, charge controller system in all respect complete all as specified and as directed | 60 | Each Job | |
| 155 | 70 | Material and labour for removing of existing cable loop from under ground, and rectification of fault/ removing damaged cable portion and rearrange the cable in same existing location and making proper connections including lugs, nuts, bolts and necessary earth works etc., complete all as specified and as directed | 40 | Each Job | |
| 156 | 71 | Supply and fix for MCB TPN 415 V, 40- 63 Amps 'C' curve including taking down old unserviceable one complete all as specified and as directed \n | 12 | Each | |
| 157 | 72 | Supply and fix for MCB SP 230 V, 6-32 Amps 'C' curve including taking down old unserviceable one complete all as specified and as directed\n | 12 | Each | |
| 158 | 73 | Supply and fix for MCB SP 230 V, 40-63 Amps 'C' curve including taking down old unserviceable one complete all as specified and as directed\n | 14 | Each | |
| 159 | 74 | Material and labour for cleaning and preparation of old painted surfaces and painting with one coat of aluminium paint on LT steel tubular poles upto 11m height and including clamps and street light brackets complete all as specified and as directed | 350 | Each Job | |
| 160 | 75 | Material and labour for following MCCBs with adjustable thermal and fixed magnetic setting of ICS = 100% ICU and including additions / altertions to existing MCCB places of the panel for properly fixing in the panel boards/ outdoor feeder boxes etc., located at various locations, reconnecting In/ Out going bus bar or cable connections with suitable rating / size lugs, extended terminals as per site requirement including taking down old unserviceable/ burned MCCB and making good disturbed panel surfaces complete all as specified and as directed .Make:Schneider/ABB/Legrand/Siemens | |||
| 161 | 75.01 | MCCB 400 Amps, 36 KA, 3 pole | 2 | Each | |
| 162 | 75.02 | MCCB 350 Amps, 36 KA 3 pole | 2 | Each | |
| 163 | 75.03 | MCCB 250 Amps, 36 KA 3 pole | 3 | Each | |
| 164 | 75.04 | MCCB 200 Amps, 36 KA 3 pole | 3 | Each | |
| 165 | 75.05 | MCCB 160 Amps, 25 KA 3 pole | 3 | Each | |
| 166 | 75.06 | MCCB 125 Amps, 16 KA 3 pole (fixed type) | 4 | Each | |
| 167 | 75.07 | MCCB 100 Amps, 16 KA 3 pole (fixed type) | 5 | Each | |
| 168 | 75.08 | MCCB 63 Amps, 16 KA 3 pole (fixed type) | 5 | Each | |
| 169 | 76 | Material and labour for PCC for coping round/ cylindrical type for existing poles whereever necessary, 1:3:6 type C-1 (Using 20mm graded stone aggregate) complete all as specified and as directed. | 8 | Cum | |
| 170 | 77 | Demolition and dismantling of damaged concrete of any description from existing poles etc., complete all as specified and as directed | 8 | Cum | |
| 171 | 78 | Supply and fix including fabrication of cable route indicator consisting of cast ironand shape as directed not less than 200mm dia, 12mm thick with inscription embossing as LT cable and fixed hot dipped GI angle iron of size 50x50x6mm thick 0.8m long and GI nuts and bolts embadded in ground including PCC 1:3:6 type C-1 (Using 20mm graded stone aggregrade) as in PCC block of size 200x200x500mm including necessary earth work Etc., complete all as specified and as directed | 40 | Each | |
| 172 | 79 | Contactor three phase 32 Amp all as directed. \nMake - Schneider/ABB/Legrand/Siemens | 2 | Each | |
| 173 | 80 | Contactor three phase 45 Amp all as directed. \nMake - Schneider/ABB/Legrand/Siemens | 3 | Each | |
| 174 | 81 | Contactor three phase 95 Amp all as directed. Make - Schneider/ABB/Legrand/ Siemens | 2 | Each | |
| 175 | 82 | Contactor three phase 185 Amp all as directed. \nMake - Schneider/ABB/Legrand/Siemens | 3 | Each | |
| 176 | 83 | Taking down corroded sign board of frame MS pipe with MS sheet of various sizes from the existing position of different location complete including making good the disturbed surface to match with the existing surfaces of the area in all respect complete all as specified and as directed | 22 | Each Job | |
| 177 | 84 | Supply, fabricate and polishing stainless steel board stand or frame work with following dia SS heavy pipe (SS 304 Grade) as per site requirement for fixing ACP (Aluminium Compost Panel) of various sizes duly lettered with nuts, bolts or screws or any other suitable arrangement on frame properly complete all as specified and as directed\nNote: Earth work PCC work and ACP sheet shall be measured and paid separately under relevant schedule item here-in-after. | |||
| 178 | 84.01 | 50mm dia | 100 | RM | |
| 179 | 84.02 | 20mm dia | 120 | RM | |
| 180 | 85 | Supply and fix 3mm thick ACP sign board sheet of various sizes with all required items of work including writing details of installation/ mechinary details etc with both side or one side vinyl pasting on radium sticker letters/ sketch within the SS frame or wall complete all as specified and as directed.\nNote: SS stand and frame whereever necessary shall be measured and paid seperately under relevant schedule Item here-in-before. | 35 | Sqm | |
| 181 | 86 | Supply, fabricate and fixing SS Ball of dia not less than 50mm on SS stand complete all as specified and as directed | 44 | Each | |
| 182 | 87 | Excavation in post holes in hard/ dense soil each n.exc 0.5cum getting out and returning filling in complete all as specified and as directed | 40 | Each | |
| 183 | 88 | Material and labour for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) for foundation of pipe fame of any size complete all as specified and as directed | 3 | Cum | |
| 184 | 89 | Supply, fabricate, install and testing outdoor type LT bus bar chamber box, double door including provision for fixing MCCB , 4 poles (250Amps to 400Amps) .The size of the bus bar box should be not less than 600 x 500 x 500mm fabricated from CPRI certified panel manufacturers made out of 3mm thick CRCA sheet steel, powder coated, with front and rear opening including locking facility with pad locks - 02 Nos and slanting cannopy on roof and mild steel channels base frame and legs made of angles not less than 50 x 50 x 5mm and including TPN aluminium bus bar of 500A capacity for looping and branch connection, the bus bar placed on suitable capacity insulators including earth point,platform, danger notice plate on both side, neoprene rubber gasket to make it completely dust and vermin proof complete all as specified and as directed .\nNote: i) MCCB will be measured and paid seperately under relevant schedule here in before. ii) The quoted rate to be included for taking down old unserviceable PVC/ sheet metal boxes complete carefully and necessary cable connections for incoming and outgoing, new / old cables with, aluminium lugs for connections along with necessary earth work and necessary brick staging including plastering and white wash ec complete all as per site requirement all as specified and as directed. | 3 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
