}

Re Tender For Installation Of Deep Tube Well Construction Of Rcc Over Head Tank And Construction Of Pump House For Industrial Estate At Belkhuti Kumarikat, Dist Baksa Group No 1, Belkhuti, Kumarikate, Dist.- Baksa-Assam

Assam Industrial Infrastructure Development Copr-AIIDC has published Re Tender For Installation Of Deep Tube Well Construction Of Rcc Over Head Tank And Construction Of Pump House For Industrial Estate At Belkhuti Kumarikat, Dist Baksa Group No 1. Submission Date for this Tender is 23-07-2021. Pump Supply Tenders in Belkhuti, Kumarikate, Dist.- Baksa Assam. Bidders can get complete Tender details and download the document.




Tender Notice

28285010
Corrigendum : Re Tender For Installation Of Deep Tube Well Construction Of Rcc Over Head Tank And Construction Of Pump House For Industrial Estate At Belkhuti Kumarikat, Dist Baksa Group No 1
Open Tender
Indian
Assam
Belkhuti, Kumarikate, Dist.- Baksa
23-07-2021

Tender Details

Re Tender For Installation Of Deep Tube Well Construction Of Rcc Over Head Tank And Construction Of Pump House For Industrial Estate At Belkhuti Kumarikat, Dist Baksa Group No 1

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 07-Jul-2021 Extension of tender Date 23-07-2021

Key Value

Document Fees
INR 1500 /-
EMD
INR 82795.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Installation of Deep Tube Well, Construction of R.C.C. Over Head Tank and Construction of Pump House for Industrial Estateat Belkhuti,Kumarikata, Dist.- Baksa, Group No.1
Sl. No. Item Description
1DEEP_TUBE_WELL: Preparing of site for placement of drilling rigincluding excavation of mud pit, circulation drain,collection chamber etc.all complete as directed.
2Movement of rig to drilling site including costof POL all complete as directed.
3Transportation of ancilary equipment, camp materials, welding set, rig accessories etc. including cost of POL all complete as directed. (a) Upto 100.00 Km
4Transportation of all store materials like pipe, strainer, cone, socket, clamp, bentonite, etc. including cost of POL all complete as directed. (a) Upto 100.00 Km
5Transportation of air compressior of Kirloskar make 540 CFM, 10.5 kg./sq cm with all accessories including the cost of POL all complete as directed. (a) Upto 100.00 Km
6Construction of temporary accomodation and low cost sanitary facility for drilling staff including cost of camp materials viz. cots, table, chairs, umbrellas, dresses, safety halmets, etc. and dismentling the accomodation after completion of the work all complete as directed.
7Providing water supply facilities at drilling all complete as directed. (a) By installing 1 No. of Singur Hand Pump.
8Drilling with drilling bit in over burden portion of soil formation including of soil sample at every 3m depth of wherever there is change of strata in sample box with distinguish mark up to depth of rock formation and withdrawing the drill bit for lowering as directed with 245mm/305mm dia drill bit.
9Casing and sinking/lowering of MS pipe 200mm dia including cost of pipe and labour charges for cashing, welding the joints and sinking by drilling Rig in position all complete.
10Drilling with drilling rig using DTH hammer in all classes of rock including collection in sample at every 3 meter depth of boring or wherever there is change of strata in sample boxes with distinguishing mark up to a required depth of boring breaking rock fracture for desired discharge. Withdrawal drill rod/bit finishing the bore hole by ramming up to a required dia minimum 150mm to the bottom & washing the wellincluding testing the yield and draw of the well and submission of all report and litho logy of well as directed by the E.I.C.
11Developing of the DTW with air compressor, make Kirloskar/Cumins all complete as directed.
12Supplying and packing pea gravel around the periphery of casing including screening, washing etc.all complete as directed.
13Supplying, fitting, fixing MS clamp of size 15 mm thick and 150 mm width having projection of 300 mm and three holes of 20 mm dia for clamping the plates by 16 mm dia hexagonal bolts of length 75 mm and nuts on both sides encircling the column pipe including two coat of enamel paint over one priming coat of different dia all complete as directed and specified. (c) 200 mm dia
14Supplying, fitting and fixing suction pipes (plain/ bevel ended), conforming to relevant IS codes of practice including supplyingand fitting of accessories, lowering of assembly pipes concentrically in the casting pipes complete as directed. (I) G.I. Pipe (a) TATA/SAIL (medium) (sockets should be welded to the pipes) (iv) 50 mm diameter
15Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary "R" brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) (v) 50 mm diameter
16Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET3 (Three Phase)with steel cable rope and submersible cable complete as directed and specified by the deptt. Three phase Submersible motor pump set(Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guarsuitable for 100 mm bore well and above. 3 HP STAGE 7 to 40 with MCB controlled Submersible motor pump setcontrol panel.
17RCC OVER HEAD TANK: Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil
18Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.
19Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 3 sand :6 coarse aggregate by volume.
20Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine. Using admixture, plasticiser (b) M 25 grade concrete
21Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete. (a) Brick on flat soling.
22Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed. (a) In Sub-structure upto plinth level including dewatering if necessary. In proportion 1:4
23Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work. 38mm thick plank.
2410 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises orrounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b)In cement mortar 1:4 (B)In super structure from plinth level up to 1st floor level.
2565 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.
26Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)(b)Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc.
27Structural steel work in sigle sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (up to 4.6m height) from plinth level including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.(c) In M.S. angles, channels, Tees etc.
28Preparing the RCC surface in roof slab, chajjas, terraces, sunken slabs, septic tank, OH tank, raft slab, walls etc. by thoroughly cleaning with wire brush etc. followed by power washing for making the surface absolutely free from any foreign particles like dust, oil, grease etc. and allowing surface to dry complete as directed at all levels.
29(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat. (A) Using Master Crete M-81 of Choksey Chemicals/ Dr. Sealkit Sealcrete (Asian Chemicals).
30Providingfitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 38 Kg. weight complete as directed and specified
31Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper. (a) With ready mixed red lead red oxide primer.
32Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (I)Surfaces over 100 mm in width or girth. (b) High gloss (Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac).
33Providing one coat of cement primer (on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.
34Finishingold/ new wall with water proofing weathercoat smooth anti-fungal premium textured exterior finish of Sandex Matt brand of Snowcem India Ltd. of required shadeafter clering and clearing the surfaces etc.including scaffolding complete as directed at alllevels (two coats).
35Supplying and fixing of 11 KV 5 KA Lighting arrestor (Poly)set complete as required and as directed by the department.
36Supplying and fitting fixing pole clamp complete as required and as directed by the department.
37PUMP ROOM (CIVIL WORKS: Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil
38Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.
39Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 3 sand :6 coarse aggregate by volume.
40Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine. Using admixture, plasticiser (b) M 25 grade concrete
41Providing and laying 25 mm thick damp proof course with cement concrete in prop. 1:1.5:4 with graded stone aggregate of 10mm down nominal size including providing approved damp proff mixture in prop. as recomended by the manufacturer including curing etc. complete as directed.
42Providing soling in foundation and under floorwith stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labourand materials and if necessary dewatering, complete. (a) Brick on flat soling.
43Brick work in cement morter with 1st class brick including racking out jointsand curing complete as directed. (a) In Sub-structure upto plinth level including dewatering if necessary. In proportion 1:4
441st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paidseparately). (A) 112 mm thick brick wall. (a) In cement morter in proportion 1:4 (1 cement :4 sand)
45Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work. 38mm thick plank.
4615 mm thick Cement plaster in single coat on single or half brickwall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4
4740 mm thick cement concrete floor consisting of 25 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 12.5 mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) finished with a floating coat of neat cement finish using cement slurry for bond @ 2.75 kg. per square metre of floor area , wearing layer is to be laid in panels including curing etc. complete as directed.
48Cement plaster skirtingwith cement mortar (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of juctions with floor. (b) 20 mm thick .
49Providing wood work in frames (chowkat) of doors, windows, clearstory windowsand other similar works wrought, framed and fixed in position in contact with C.C. or brick masonry walls including supplying, fitting and fixing with nails, screws, bolts and nuts complete with M.S. plate hold fasts (4mm X 3mm X 250mm) as per design and embeded in cement concrete block in prop. 1:1:4 and with 2 coats of kiricide oiling to the timber faces in contact with C.C. and masonry as directed and specified.(a) With sal wood
50Providing and fixing flush door shutters solidcore construction with frame of first class hard wood with cross bend and face veneeredplywood face panels conforming to relevant I.S. Codeincluding oxidised iron butt hinges (100X75X3.5mm) 6 nos. with necessarywood screws. (a) Decorative type face panel and block board core. (i) 40mmthick
51Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDALCO/ NALCO/ BALCO/ JINDAL/ OTHER equivalent primary producer ) without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a) 3 track sliding window. (ii) 5 mm frosted glass
52Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level). (b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works, retaining wall & boundary wall etc.)
53Providing, fitting and fixing M.S. Grill of required pattern for winddows / clearstory windows / openings with M.S. flats at required spacing and farmed alround square or round M.S. bars with round headed bolts and nuts or screws. (a) Ornamental Grill. (c) Fixed to brickwork/ P.C.C/R.C.C.
54Applying primary coat over new steel and other metal surfaces upto 100 mm in width or grith after preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wood scrappers and sand paper. (a) With ready mixed red lead red oxide primer.
55Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of approved brand and manufacture( Asian paint/Berger paint/ICI paint/ J &Npaint/Nerolac to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (I)Surfaces over 100 mm in width or girth. (b) High gloss (Asian paint/ Berger paint/ ICI paint / J& N paint / Nerolac).
56Applying priming coat over new wood based surfaces over 10 cm in width/grith after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sandpapering and knotting. (a) With ready mixed paint, wood primer (white).
57Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shadeincluding cleaning the surface of ditrt, dust and other foreign material , sand papering and stopping (i) Surfaces over 100 mm in width or girth. (a) High gloss (Asian Paint/ Berger Paint /ICI paint/ J& N paint /Nerolac
58Applying one coat of distemperprimer of approved brand and manufacture on wall surfaces after thoroughly brushing the surface free from mortar drops and other foreign matter and including preparing the surface even and sand papered smooth.
59Providing one coat of cement primer (on ext. wall) of approved brand and manufacture on new surfaces after thoroughly brooming the surface preparing the surface even and sand papered smooth.
60Supplying, fitting and fixing alluminum fittings of approvedmake reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete (annodised to a bright natural mat or stain finish). (a) Sliding Door Bolts. (i) 300 mm X 16 mm
61Supplying, fitting and fixing alluminum fittings of approvedmake reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete (annodised to a bright natural mat or stain finish). (b) Tower bolt. (i) 300 mm X 12 mm
62Supplying, fitting and fixing alluminum fittings of approvedmake reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete (annodised to a bright natural mat or stain finish). (b) Tower bolt. (ii) 250 mm X 12 mm
63Supplying, fitting and fixing alluminum fittings of approvedmake reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete (annodised to a bright natural mat or stain finish). (c)Door handle. (ii) 100 mm
64Supplying, fitting and fixing alluminum fittings of approvedmake reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete (annodised to a bright natural mat or stain finish). (c) Door handle. (iii) 150 mm
65Supplying, fitting and fixing alluminum fittings of approvedmake reasonably smooth, free from sharp edges, flows and other defacts with counter sunk holes for screws including necessary aluminium screws etc. complete (annodised to a bright natural mat or stain finish). (e) Butt hinge. (v) 100 mm x 75 mm x 4 mm
66Pre construction antitermite treatmentat the bottom of foundationof foundation pits and walls on either side up to a height of 300m.m. from bottom of the excavation made for column ,plinth beam, wall trenches etc. by applying the emulsion @ 5 litres per sq.mt. Of the surface area before starting construction work( supplying of necesary tools and accessories by the contractor) as per the direction of the Department complete. (a) with aquous emulsion having concentration 1:19 with chloropirophose solution (tricel or equivalent) and water, i.e. 1% solution.
67Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 including finishing with cement painting in prop. 1:1 complete
68PUMP ROOM (INTERNAL ELECTRIFICATIONWORKS: Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose(Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. (b) Medium point upto 6.00mtr length
69Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany. Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose(Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. (c) Long point upto 10.00mtr length
70Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark withphenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. (b) Medium point upto 6.00mtr length
71Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - IIIconduit.
72Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series. (Schneider MG, legrand, Hagermake). 6 to 32A
73Supplying including fitting and fixing of high speed AC Ceiling fan complete with all accessories like , down rod, canopy etc.of following sweeps with making necessary connection etc.as reqd complete and directed by the deptt.(Without regulator). (a) 1400mm sweep
74Installation, testing and commissioning of ceiling fan including the regulator, down rod of standard size (up to 300mm length) and connection etc complete as specified and directed by the department.
75Supplying fitting and fixing of single wall brackets model 37712 (or equivalent as approved by the Deptt.) on the wallin GI/ MS switch board (ISI marked)half conceal on wallwith phenolic laminated sheet cover with all accessoriesincluding connectionas required complete. Without lamp.
76Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories such as ballast, starter etc. directly on wall / ceiling including connection as approved by the Deptt.)with 1.5 sq mm P.V.C. insulated S.C. copper conductor as required and as directed by the department. Striplite luminaries complete with VPIT copper ballast/ Electronic ballast anddecorative end cap and 1 X 36 / 40 wattFluorescent tube.(Crompton Greavesmake) Model- DSG1114LDB CROMGOLD / DSG1114LDBN CROM GOLD NEW / DSG1314EB CG GOLD / DSG 1414EB PLANET GOLD with Super Saver / Super Brite Lamp. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUARmake.
77Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and Lightning Arrestor etc. as specified and directed by the deptt.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail