}

Construction Of Middle Portion Of Aspalpur To Bunda Link Road, Executive Engineer, Construction division .P.W.D.-Uttar Pradesh

Public Works Department-PWD has published Construction Of Middle Portion Of Aspalpur To Bunda Link Road. Submission Date for this Tender is 28-06-2021. Road Work Tenders in Executive Engineer, Construction division .P.W.D. Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

28280846
Construction Of Middle Portion Of Aspalpur To Bunda Link Road
Open Tender
Indian
Uttar Pradesh
Executive Engineer, Construction division .P.W.D.
28-06-2021

Tender Details

Construction Of Middle Portion Of Aspalpur To Bunda Link Road

Key Value

Document Fees
INR 944 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Construction of Middle Portion of Aspalpur to Bunda Link road
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Construction of Embankment with approved material obtain from Borrow pits with all lift and lead, transporting to site ,spreding grading to required slope and compacting to meet requirement of Table-300-2 (Excluding cost of GST) 1700 Cum
2 2 Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting wheel smooth will roller to achieve the desired density, complete as per Clause 401.A (Excluding cost of GST) 131 Cum
3 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (G-2) specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80 - 100 Km. in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. as per clause 405(2A)(Excluding cost of GST) 191.25 Cum
4 4 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification (G-3) including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density. as per Clause 405 A (Excluding cost of GST) 191.25 Cum
5 5 8cm wide brick edging on both side of road with first class bricks laid on edge with mud mortar in 8cm wide and 12cm deep including labour and supply of brick finished to required tamplate and proper alingment and including dressing ramming the excavated earth as directed by E/I S.I. No. 765 (Excluding cost of GST) 0.85 km
6 6 Providing and applying prime coat with bitumen emulsion (MS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502.. (Excluding cost of GST) (Schedule "C" Attached) 2550 Sqm
7 7 Providing and applying tack coat with bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503. (Excluding cost of GST) (Schedule "C" Attached) 2550 Sqm
8 8 Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 (13.2mm & 11.20mm in 2:1) mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508. (Excluding cost of GST) (Schedule "C" Attached) 2550 Sqm
9 9 Providing and laying seal coat sealing 6.7mm stone grit @0.009 cum per sqm the voids in a bituminous grade VG-10 @0.65kg per sqm surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. (Excluding cost of GST) (Schedule "C" Attached) 2550 Sqm
10 10 Providing and Laying Hume pipe Culvert 350 mm dia 22.5 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail