Military Engineer Services-MES has published Special Repair To Bldg No P 173 Of 12 ( I ) R And O Flt At Rangapahar Military Station. Submission Date for this Tender is 27-07-2021. Building Repair Tenders in Rangapahar Nagaland. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Jun-2021 | Corrigendum_1 | Date | 20-07-2021 |
| 2 | 20-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-07-2021 |
| Name of Work: SPECIAL REPAIR TO BLDG NO P-173, OF 12 (I) R & O FLT AT RANGAPAHAR MILITARY STATION. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed. | 270 | Sqm | |
| 2 | 2 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. | 1 | Cum | |
| 3 | 3 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. | 1 | Cum | |
| 4 | 4 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. | 5 | Cum | |
| 5 | 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. | 100 | Sqm | |
| 6 | 6 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and as directed. | 40 | Sqm | |
| 7 | 7 | Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. | 250 | Sqm | |
| 8 | 8 | Demolition of cement concrete (reinforced) as in roofs, floors (Other than ground floor), beams, chajjas, facias, fins and similar work (reinforcement cut as required to facilitate demolition) and removal of rubbish from the site complete all as specified and as directed. | 1 | Cum | |
| 9 | 9 | Taking down wooden chowkats or frames with shutters n.exc. 1.50 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | 5 | Each | |
| 10 | 10 | Taking down wooden chowkats or frames with shutters exc. 1.50 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed. | 1 | Each | |
| 11 | 11 | Taking down shutter of any description exc. 1.00 Sqm and n.exc. 2.00 Sqm each complete all as specified and as directed. | 1 | Per leaf | |
| 12 | 12 | Taking down shutter of any description n.exc. 1.00 Sqm each complete all as specified and as directed. | 1 | Per leaf | |
| 13 | 13 | Taking down shutter of any description exc. 1.00 Sqm and n.exc. 2.00 Sqm each and re-fixing in same opening complete all as specified and as directed. | 1 | Per leaf | |
| 14 | 14 | Taking down shutter of any description n.exc. 1.00 Sqm each and re-fixing in same opening complete all as specified and as directed. | 1 | Per leaf | |
| 15 | 15 | Material and Labour for use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work, etc. not exceeding 200mm thick with rough finished surfaces of concrete flat complete all as specified and as directed. | 2 | Sqm | |
| 16 | 16 | Easing of door / window shutters for easy closing or opening leaf, tightening of hinges or changing the position of hinges, adjustment of tower bolt, sliding bolt etc complete all as specified and directed. | 1 | Per leaf | |
| 17 | 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. | 1.75 | Qtl | |
| 18 | 18 | Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using\nERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 complete all as specified and as directed . | 175 | Kg | |
| 19 | 19 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. | 40 | Sqm | |
| 20 | 20 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and as directed. | 2 | Sqm | |
| 21 | 21 | Material and labour for GI frame work, size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approximate 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (Not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm end flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting lips across the intermediate channel of 457 mm centre to centre complete all as specified and as directed. | 200 | Sqm | |
| 22 | 22 | Material and labour for providing and fixing Gypsum board 12 mm thick in ceiling fixed with screws as per manufacturer's instruction complete all as specified and as directed. | 200 | Sqm | |
| 23 | 23 | Supply and fixing pre-fabricated glass fibre reinforced gypsum beads / cornices architecturally beautifully crafted decorated 100 mm wide complete all as specified and directed. | 50 | Rm | |
| 24 | 24 | Supply and fixing 4 mm thick size 595 x 595 mm HPSC (High pressure Steam Cured) pre-primefered self embossed texture designer board E-board classic to be fixed with and including GI grid / section of size 600 mm x 600 mm with main runner 38 x 24 x 0.90mm thick, cross tee 28.6 x 24 x 0.9 mm and wall angle 19 x 19 x 0.9 mm duly suspended with 4 mm dia GI wire hanger 1200 mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and directed. | 25 | Sqm | |
| 25 | 25 | Material and labour for block boards 18 / 19 mm thick grade 2 quality, interior grade, commercial type fixed with screws to timber framework for cup board including lipping / beading as required complete all as specified and directed. | 5 | Sqm | |
| 26 | 26 | Supply and fixing 18 / 19 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work for cupboard including lipping / beading as required complete all as specified and as directed. | 5 | Sqm | |
| 27 | 27 | Material and labour for external teak wood lipping, 6 mm thick fixed with nail on 12 mm thick particle board complete all as specified and as directed. | 5 | Rm | |
| 28 | 28 | Supply and fixing continuous (piano) hinge, mild steel, bright finish or electro-galvanised, 30mm width of flaps (when open) complete all as specified and as directed. | 5 | Rm | |
| 29 | 29 | Supply and fixing for 30mm thick factory made flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed. | 4 | Sqm | |
| 30 | 30 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. | 1 | Cum | |
| 31 | 31 | Ditto- all as per serial item No. 30.00 here-in- before but except brick complete all as specified and as directed.\n(Note: Serviceable bricks as obtained from serial item No. 2.00 on shall be reused under this item) | 0.5 | Cum | |
| 32 | 32 | Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed. | 2 | Sqm | |
| 33 | 33 | Materials and labour for 10 mm thick rendering on ceiling surface in cement mortar (1:3) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. | 50 | Sqm | |
| 34 | 34 | Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surface on wall in two layers, first layer shall be of 10 mm thick in cement mortar 1:4, finish the surface fair and even and finishing layer shall be of 5 mm thick in cement mortar 1:4 mixed with water proofing compound as manufacturer instructions and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.\nNote: WPC shall be measured and paid seperately. | 100 | Sqm | |
| 35 | 35 | Materials and labour for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. | 120 | Sqm | |
| 36 | 36 | Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) complete all as specified and as directed. | 50 | Kg | |
| 37 | 37 | Materials and labour for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs / benching / Cover fillets etc rounded or chamferred on edges complete all as specified and directed. | 0.5 | Cum | |
| 38 | 38 | Material and labour for precast cement concrete chequered tiles of size 200 x 200 x 25 mm thick shall be laid on floor etc set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed / bedding layer in CM (1:4) and 75 mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. | 20 | Sqm | |
| 39 | 39 | Material and labour for hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. | 0.5 | Cum | |
| 40 | 40 | Material and labour for 40 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in floor, finished the surface even and smooth using extra cement complete all as specified and directed. | 20 | Sqm | |
| 41 | 41 | Material and labour for 75 mm thick PCC (1:4:8) type D2 (Using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. | 40 | Sqm | |
| 42 | 42 | Material and labour for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, paving, footpath etc and finished the surface even and smooth without using extra cement complete all as specified and as directed. | 40 | Sqm | |
| 43 | 43 | Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour / shade / matrix of tiles shall be laid over and including 15mm thick screed bed / bedding layer in CM (1:6) finished the surface even and fair to receive tile complete all as specified and as directed. | 20 | Sqm | |
| 44 | 44 | Material and labour for non skid ceramic coloured tiles (Premium Quality) 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour / shade / matrix of tiles shall be laid over and including 15mm thick screed bed / bedding layer in CM (1:6) finished the surface even and fair to receive tile complete all as specified and as directed. | 10 | Sqm | |
| 45 | 45 | Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 300x200x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed.\n | 10 | Sqm | |
| 46 | 46 | Material and labour for glazed ceramic coloured tiles (Premium Quality) of size 350x250x7mm / 450 x 350 x 7 mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed. | 10 | Sqm | |
| 47 | 47 | Material and labour for virified Ceramic tiles (Premium Quality), light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. | 25 | Sqm | |
| 48 | 48 | Material and labour virified Ceramic tiles (Premium Quality), light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces, skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with the shade of tiles laid over and including 10mm thick cement plaster in CM (1:4) complete all as specified and as directed. | 5 | Sqm | |
| 49 | 49 | Material and labour for 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) as in subfloor finished the surface fair and even to receive floor finishes complete all as specified and as directed. | 50 | Sqm | |
| 50 | 50 | Supply and fixing for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, window cills, cooking platforms and like etc and fixed over and including 15mm thick cement plaster in cement mortar (1:6) and pointing with white cement mixed with pigment to match the shade of granite (1:2) using marble dust complete all as specified and as directed. | 5 | Sqm | |
| 51 | 51 | Material and labour for Granite (of any type) work (table rubbed and polished) for wall lining (veenering to wall) 12 mm thick in cement mortar 1:3 and pointing with white cement 1:2 using marbel dust with admixture of pigment to match with shade of granite complete all as specified and as directed. | 5 | Sqm | |
| 52 | 52 | Material and labour rounding to edges of stone slab one edge such as in steps, cooking platform and other similar situation complete all as specified and as directed. | 5 | Rm | |
| 53 | 53 | Material and labour for racking, cutting and waste on stone slabs / glazed tiles complete all as specified and directed. | 1 | Rm | |
| 54 | 54 | Material and labour for circular cutting or notching and waste on stone slabs / glazed tiles complete all as specified and directed. | 1 | Rm | |
| 55 | 55 | Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.\n | 2 | Cum | |
| 56 | 56 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi-tred/ stopped ends etc. complete all as specified and as directed.\n | 50 | Rm | |
| 57 | 57 | Add or deduct for each 25 mm girth or part thereof over or under 30cm from item No. 56 above. (For adjustment only) | 50 | Rm | |
| 58 | 58 | Material and labour for Neeru finish to plastering as specified complete all as specified and as directed. | 25 | Sqm | |
| 59 | 59 | Material and labour for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use and waste of formwork complete all as specified and as directed. | 0.5 | Cum | |
| 60 | 60 | Material and labour for RCC (nominal mix) (1:1.5:3) type A1 (using 20 mm graded stone aggregate) as in slabs supported on wall / beams / columns in floors / roofs/ shelves and the like complete all as specified and as directed. | 0.5 | Cum | |
| 61 | 61 | Material and labour for RCC (nominal mix) (1:1.5:3), type A1 (using 20mm graded stone aggregate) as in chajjas and balconies complete all as specified and as directed. | 0.5 | Cum | |
| 62 | 62 | M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished surfaces of concrete flat complete all as specified and as directed. | 5 | Sqm | |
| 63 | 63 | M & L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves\nincluding supports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and as directed. | 5 | Sqm | |
| 64 | 64 | Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | 20 | Kg | |
| 65 | 65 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. | 20 | Kg | |
| 66 | 66 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed. | 100 | Sqm | |
| 67 | 67 | Materials and labour for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed. | 50 | Sqm | |
| 68 | 68 | Materials and labour for preparation of new plastered surfaces of wall and applying two coats of plastic emulsion paint complete all as specified and as directed. | 20 | Sqm | |
| 69 | 69 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. | 100 | Sqm | |
| 70 | 70 | Materials and labour for preparation of new plastered surfaces of wall and applying two coats of weather coat exterior emulsion paint over a coat of alkali resistant primer complete all as specified and as directed. | 50 | Sqm | |
| 71 | 71 | Materials and labour for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed. | 50 | Sqm | |
| 72 | 72 | Materials and labour for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed. | 10 | Sqm | |
| 73 | 73 | Materials and labour for preparation of old decorated plastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed. | 10 | Sqm | |
| 74 | 74 | Materials and labour for preparation of old decorated plastered surfaces of wall by brooming down with steel wire brushing and applying one coat of cement base paint complete all as specified and as directed. | 50 | Sqm | |
| 75 | 75 | Materials and labour for preparation of old decorated plastered surfaces of wall and applying one coat of weather proof exterior acrylic emulsion paint complete all as specified and as directed. | 10 | Sqm | |
| 76 | 76 | Complete removal of existing treatment from old decorated plastered / unplastered surface of wall complete all as specified and directed. | 800 | Sqm | |
| 77 | 77 | Complete removal of existing treatment from old decorated plastered / unplastered surface on ceiling complete all as specified and directed. | 50 | Sqm | |
| 78 | 78 | Materials and labour for preparation of old plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed. | 350 | Sqm | |
| 79 | 79 | Materials and labour for applying 3 mm thick wall care putty on wall complete all as specified and as directed. | 350 | Sqm | |
| 80 | 80 | Materials and labour for preparation of old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and as directed. | 350 | Sqm | |
| 81 | 81 | Materials and labour for preparation of old plastered or unplastered surfaces on ceiling and applying two coats of oil bound distemper complete all as specified and as directed. | 50 | Sqm | |
| 82 | 82 | Materials and labour for preparation of old plastered or unplastered surfaces of wall and applying two coats of plastic emulsion paint complete all as specified and as directed. | 10 | Sqm | |
| 83 | 83 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed. | 5 | Sqm | |
| 84 | 84 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. | 5 | Sqm | |
| 85 | 85 | Material and labour for preparation of old painted steel surfaces n.exc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. | 1 | 10 Rm | |
| 86 | 86 | Material and labour for preparation of new or previously untreated steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. | 10 | 10 Rm | |
| 87 | 87 | Supply and fixing solar control film 25 micron, reflective type complete all as specified and directed. | 5 | Sqm | |
| 88 | 88 | Supply and fixing 18 / 19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screw to timber framework complete all as specified and directed. | 5 | Sqm | |
| 89 | 89 | Supply and fixing 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screw to timber framework complete all as specified and directed. | 5 | Sqm | |
| 90 | 90 | Supply and fixing 12 mm thick Veneered decorative plywood, grade-1 (with BWR resin) with decorative face veeners on one face, fixed with nails to timber frame work as in wall panel complete all as specified and directed. | 10 | Sqm | |
| 91 | 91 | Material and labour for well-seasoned 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. | 0.1 | Cum | |
| 92 | 92 | Material and labour well seasoned 2nd class hard wood plain fillets, square, rectangular in section, wrought secured with nails or brads, sectional area exc. 13 but not exc. 25 Sqcm complete all as specified and as directed. | 10 | Rm | |
| 93 | 93 | Material and labour for well seasoned 2nd class hard wood timber in scantlings, clean sawn, timber framed and fixed complete all as specified and as directed. | 0.1 | Cum | |
| 94 | 94 | Supply and fixing 125mm size hasp and staple, safety type, brass mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and as directed. | 4 | Each | |
| 95 | 95 | Supply and fixing 40 mm dia cupboard knob, fixed with nuts, screws and washers of brass, polished complete all as specified and directed. | 5 | Each | |
| 96 | 96 | Supply and fixing in repair Drapery rod of anodised alluminium of 20 mm dia with fixing bracket, stops, rollers and rings etc complete all as specified and directed. | 25 | Rm | |
| 97 | 97 | S & F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. | 25 | Kg | |
| 98 | 98 | Material and labour for taking down and servicing , re-securing glazed aluminium door size exc 1.50 Sqm but n.exc 4.00 Sqm each by easing, adjusting, securing of styles, mullions, pivots, cleats, fittings including replacing worn out rubber packing, glazing clips, aluminium anodised snap beading, servicing locks including fixing only aluminium mongeries etc and refixing in the same opening complete all as specified and directed.\n(Note: Defective aluminium mongeries fitted / replaced shall deemed to be included in the quoted rate) | 5 | Each | |
| 99 | 99 | Supply and fixing aluminium frame for doors, windows, ventilators, powder coated of any colour (thickness of powder coating shall be not less than 50 micron) with one or more rebates including jointing cleats for fixing to wall with necessary fittings complete all as specified and directed. | 100 | Kg | |
| 100 | 100 | Supply and fixing 4.80 mm thick Sheet glass, ordinary quality and glazing in alluminium door in square exe 0.50 Sqm in each pane complete all as specified and directed. | 5 | Sqm | |
| 101 | 101 | Supply and fixing 4.80 mm thick Sheet glass, grounded or obscured or frosted on one side and glazing in alluminium door in square exe 0.50 Sqm in each pane complete all as specified and directed. | 5 | Sqm | |
| 102 | 102 | Supply and fixing 4.00 mm thick Sheet glass, ordinary quality and glazing in alluminium window in square n.exe 0.50 Sqm in each pane complete all as specified and directed. | 5 | Sqm | |
| 103 | 103 | Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. | 5 | Sqm | |
| 104 | 104 | Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. | 4 | Each | |
| 105 | 105 | Supply and fix alluminium (die cast) body door closure hudraulically regulated, designation No. 2, universal type suitable for door shutter of 701 to 850mm in width and weight between 36 to 60 Kg complete all as specified and directed. | 2 | Each | |
| 106 | 106 | Supply and fixing 100 mm size 4 lever brass mortice lock, vertical type complete all as specified and directed. | 5 | Each | |
| 107 | 107 | Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and as directed. | 10 | Each | |
| 108 | 108 | Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty, glazing pin etc in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal frame complete all as specified and directed. | 5 | Sqm | |
| 109 | 109 | Supply and fixing 0.71 mm thick plain alluminium sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing complete all as specified and as directed. | 5 | Sqm | |
| 110 | 110 | Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement complete all as specified and as directed. | 3 | Sqm | |
| 111 | 111 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. | 5 | Rm | |
| 112 | 112 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. | 15 | Rm | |
| 113 | 113 | Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. | 15 | Rm | |
| 114 | 114 | Refixing old steel tubing and connections 15 mm bore in new or old position with all fittings to Walls / ceiling / floors, etc. complete all as specified and directed. | 5 | Rm | |
| 115 | 115 | Refixing old steel tubing and connections 20 mm bore in new or old position with all fittings to Walls / ceiling / floors, etc. complete all as specified and directed. | 5 | Rm | |
| 116 | 116 | Material and labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed. | 10 | Rm | |
| 117 | 117 | Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd. | 10 | Rm | |
| 118 | 118 | Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd. | 10 | Rm | |
| 119 | 119 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning the complete inner surface by rubber / nylon scrapper to remove sludge / silt and washing with bleaching powder solution and then clear water etc and hoisting in position if required, reconnecting and refixing in position complete all as specified and directed. | 2 | Each | |
| 120 | 120 | Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 1000 litres with and including 20mm bore ball brass valves, high pressure, with polythene\nfloat and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed . | 1 | Each | |
| 121 | 121 | Dismantling of CI pipes of 100 mm dia including all fittings complete all as specified and directed. | 5 | Rm | |
| 122 | 122 | Dismantling of CI pipes of 75 mm dia including all fittings complete all as specified and directed. | 5 | Rm | |
| 123 | 123 | Supply and fixing cast iron 100 mm bore sand cast soil, waste and vent pipe in any length, with or without ears with cement joint fixed on wall complete all as specified and directed. | 5 | Rm | |
| 124 | 124 | Supply and fixing cast iron 75 mm bore sand cast soil, waste and vent pipe in any length, with or without ears with cement joint fixed on wall complete all as specified and directed. | 5 | Rm | |
| 125 | 125 | Supply and fixing cast iron 100 mm bore bends (any radious), diminishing pieces or taper complete all as specified and directed. | 1 | Each | |
| 126 | 126 | Supply and fixing cast iron 100 mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallal branches and aceess door complete all as specified and directed. | 1 | Each | |
| 127 | 127 | Supply and fixing 100mm bore cast iron cowls complete all as specified and as directed. | 1 | Each | |
| 128 | 128 | Supply and fixing cast iron 75mm bore bends (any radious), diminishing pieces or taper complete all as specified and directed. | 1 | Each | |
| 129 | 129 | Supply and fixing cast iron 75mm bore branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallal branches and aceess door complete all as specified and directed. | 1 | Each | |
| 130 | 130 | Supply and fixing 75mm bore cast iron cowls complete all as specified and as directed. | 1 | Each | |
| 131 | 131 | Taking down AC / salt glazed ware pipes including fitting upto 110 mm bore complete all as specified and directed. | 10 | Rm | |
| 132 | 132 | Supply and fixing for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trench or floors complete all as specified and directed. | 5 | Rm | |
| 133 | 133 | Supply and fixing for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall complete all as specified and directed. | 5 | Rm | |
| 134 | 134 | Supply and fixing for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed. | 5 | Rm | |
| 135 | 135 | Supply and fixing for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall complete all as specified and directed. | 5 | Rm | |
| 136 | 136 | Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. | 2 | Each | |
| 137 | 137 | Supply and fixing 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. | 2 | Each | |
| 138 | 138 | Supply and fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. | 2 | Each | |
| 139 | 139 | Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. | 2 | Each | |
| 140 | 140 | Supply and fixing 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. | 2 | Each | |
| 141 | 141 | M&L for mild steel works as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. | 10 | Kg | |
| 142 | 142 | Supply and fixing as in repair 15mm dia bib taps cast copper alloy chromium plated, fancy type , long neck with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and as directed. | 5 | Each | |
| 143 | 143 | Supply and fixing as in repair 15mm bore angle valve, fancy type, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe complete all as specified and as directed. | 2 | Each | |
| 144 | 144 | Supply and fixing as in repair concealed stop valve, with long shank and cum, fancy type, cast copper alloy with crutch or butterfly handle, screwed down both ends for high pressure as per ISI, suitable for 15 mm dia iron pipe complete all as specified and directed. | 2 | Each | |
| 145 | 145 | Supply and fixing cast iron work grade FG 150,unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 Kg each complete all as specified and as directed. | 50 | Kg | |
| 146 | 146 | Supply and fixing as in repair stainless steel (conforming to AISI-304 grade) kitchen sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 352mmx 178mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete all as specified and as directed by the Engr-in-Charge.\n | 1 | Each | |
| 147 | 147 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. | 0.25 | Cum | |
| 148 | 148 | Material and labour for machine pressed precast cement concrete interlocking paver blocks 60mm thick and M 35 Grade confirming to IS-15658-2006, set, jointed and pointed in neat cement slurry in floor with grey cement & no pigments complete all as specified and as directed. | 10 | Sqm | |
| 149 | 149 | Material and labour for 20-25 mm thick machine cut kota stone slab over and including 20mm thick screed bed in cement mortar (1:4) with roughening of surface, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. | 48 | Sqm | |
| 150 | 150 | Material and labour for 20-25 mm thick machine cut kota stone slab on verticle surface as skirting/dado over and including 10mm thick cement plaster in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. | 5 | Sqm | |
| 151 | 151 | Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. | 10 | Sqm | |
| 152 | 152 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (including unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.), removing materials off the site of work and making good disturbed surfaces of walls, floors, etc.all as directed. | 180 | Per Point | |
| 153 | 153 | Material and labour for point wiring (cocealed type) including necessary chase cutting of wall for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for earth continuity wire connected to common earth dolly drawn through and including PVC conduit of adequate size with all accessories and sunk modular GI box for mounting switch socket and fan regulator etc complete all as specified and as directed. \nNote: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.\n | 104 | Per Point | |
| 154 | 154 | .-Ditto- all as per item No 153.00 here-in-before but for 3 pin 6 amps switch socket outlet on the independant board with 1.5 Sqmm cable and -ditto-. | 35 | Per Point | |
| 155 | 155 | .-Ditto- all as per item No 153.00 here-in-before but for 3 pin 6 amps switch socket outlet on the same board with 1.5 Sqmm cable and -ditto-. | 15 | Per Point | |
| 156 | 156 | .-Ditto- all as per item No 153.00 here-in-before but for one 3 pin 16 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor and -ditto-. | 26 | Per Point | |
| 157 | 157 | Supply and fixing modular switch 1 way 6A, 1 module complete all as specified and as directed.\n | 154 | Each | |
| 158 | 158 | Supply and fixing modular switch 1 way 16A, 1 module complete all as specified and as directed.\n | 26 | Each | |
| 159 | 159 | Supply and fixing modular socket outlet, 6A - 2/3 pin combined 2 module complete all as specified and as directed.\n | 35 | Each | |
| 160 | 160 | Supply and fixing modular socket outlet, 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.\n | 26 | Each | |
| 161 | 161 | Supply and fixing modular bell push 1 way 6A, 1 module complete all as specified and as directed.\n | 9 | Each | |
| 162 | 162 | Supply and fixing modular bell AC 230 volts musical type complete all as specified and as directed.\n | 9 | Each | |
| 163 | 163 | Supply and fixing motor starter SP 32A complete all as specified and as directed. \n | 9 | Each | |
| 164 | 164 | Supply and fixing modular fan step regulator, 120W - 2 module complete all as specified and directed. | 15 | Each | |
| 165 | 165 | Supply and fixing ceiling rose, 3 phase/PVC/\npolycarbonate, isolated body complete all as specified and as directed.\n | 56 | Each | |
| 166 | 166 | Supply and fixing for 20 watt LED, 4 feet long, wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and electronic driver etc with all accessories, internally prewired and fixing the same on and including two Nos. PVC blocks and connecting up with flexible copper cable of size 0.75 Sqmm 3 core from ceiling rose to the light fittings includiong taking down old unserviceable light fitting complete all as specified and directed. | 20 | Each | |
| 167 | 167 | Supply and fixing for 10 watt LED 2' wall mounted polycarbonate batten internally prewired with electronic driver and polycarbonate diffuser and fixing the same on and including two Nos. PVC blocks and connecting up with flexible copper cable of size 0.75 Sqmm 3 core from ceiling rose to the light fittings including taking down old unserviceable light fittings complete all as specified and directed. | 10 | Each | |
| 168 | 168 | Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through suitable size of double locked casing-caping with all accessories including taking down old un serviciable sub-main wiring complete all as specified and as directed.\nNote : Three runs of 4 Sqmm cable and casing-caping shall be measured as one unit. | 200 | Rm | |
| 169 | 169 | Supply and fixing for 2' x 2' recessed mounted LED luminaire 42 W including LED lamp, other accessories and connecting up with flexible copper cable of size 0.75 Sqmm 3 core from ceiling rose to the light fittings including taking down old unserviceable light fittings complete all as specified and as directed. \n | 14 | Each | |
| 170 | 170 | Supply and fixing for recessed mounted LED luminaire 8 W including LED lamp, other accessories and connecting up with flexible copper cable of size 0.75 Sqmm 3 core from ceiling rose to the light fittings including taking down old unserviceable light fittings complete all as specified and as directed. \n | 30 | Each | |
| 171 | 171 | Supply and fixing for energy efficient LED strip light 15W/15Mtr including provision of flexible copper cable of size 0.75 Sqmm 3 core from ceiling rose complete all as specified and as directed. \n | 100 | Rm | |
| 172 | 172 | Supply and fixing compact street lighting luminaires with deep drawn housing for single 20 Watt LED with toughened glass protection, pressure die cast aluminium housing IP66,with epoxy white powder coated and fixing bracket made of 25mm bore galvanised iron light grade pipe made to shape having overall length 1.2 mtr ,fixed over the vertical wall through two numbers mild steel clamp of 25mm width ,3mm thick MS flat strip and four Nos nuts,bolts & washers of 12mm dia ,150mm long grouted into wall including taking down old unserviceable light fittings complete all as specified and as directed. | 2 | Each | |
| 173 | 173 | Supply and fixing modular metal flush box, 3 module complete all as specified and directed. | 61 | Each | |
| 174 | 174 | Supply and fixing modular metal flush box, 4 module complete all as specified and directed. | 10 | Each | |
| 175 | 175 | Supply and fixing modular metal flush box, 6 module complete all as specified and directed. | 10 | Each | |
| 176 | 176 | Supply and fixing modular metal flush box, 8 module complete all as specified and directed. | 5 | Each | |
| 177 | 177 | Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed. | 61 | Each | |
| 178 | 178 | Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed. | 10 | Each | |
| 179 | 179 | Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed. | 10 | Each | |
| 180 | 180 | Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed. | 5 | Each | |
| 181 | 181 | Supply and fixing as in repair MCB DB SPN 8 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.\n | 6 | Each | |
| 182 | 182 | Supply and fixing as in repair MCB DB SPN 4 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.\n | 2 | Each | |
| 183 | 183 | Supply and fixing as in repair MCB DB TPN 4 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed.\n | 2 | Each | |
| 184 | 184 | Supply and fixing as in repair MCB 63 Amps, TPN, 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.\n | 2 | Each | |
| 185 | 185 | Supply and fixing as in repair MCB 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.\n | 20 | Each | |
| 186 | 186 | Supply and fixing as in repair MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.\n | 40 | Each | |
| 187 | 187 | Supply and fixing as in repair LED flood light luminaires, 300 watt with electronic drivers, IP-66, 415Volt, powder coated, die-cast aluminium housing complete including connecting and testing all as specified and as directed .\n | 2 | Each | |
| 188 | 188 | Materials and labour as in repair for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.\n (Note: Earthwire upto 7.50 m from earthplate shall be measured and paid in the quoted rate) | 1 | Each Set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
