}

Works Related To Providing Laying Jointing Of Various Size Hdpe Pipe Line And Related Works On Turnkey Basis Including Defect Liability Period Of 12 Months Of Rural Piped Wss Ber Kalla Tehsil Jaitaran Distt . -Pali Under Jjm, JAITARAN-Rajasthan

Public Health Engineering Department-PHED has published Works Related To Providing Laying Jointing Of Various Size Hdpe Pipe Line And Related Works On Turnkey Basis Including Defect Liability Period Of 12 Months Of Rural Piped Wss Ber Kalla Tehsil Jaitaran Distt . -Pali Under Jjm. Submission Date for this Tender is 19-07-2021. Pipe Laying Tenders in JAITARAN Rajasthan. Bidders can get complete Tender details and download the document.




Tender Notice

28275171
Works Related To Providing Laying Jointing Of Various Size Hdpe Pipe Line And Related Works On Turnkey Basis Including Defect Liability Period Of 12 Months Of Rural Piped Wss Ber Kalla Tehsil Jaitaran Distt . -Pali Under Jjm
Open Tender
Indian
Rajasthan
JAITARAN
19-07-2021

Tender Details

Works Related To providing laying jointing Of Various Size Hdpe Pipe Line And Related Works On Turnkey Basis Including Defect Liability Period Of 12 Months Of Rural Piped Wss Ber Kalla Tehsil Jaitaran Distt . -Pali Under Jjm

Key Value

Document Fees
INR 5000 /-
EMD
INR 123540.0 /-
Tender Value
INR 61.77 Lakhs /-

BOQ Items

Name of Work :- WORKS RELATED TO PLJ OF VARIOUS SIZE HDPE PIPE LINE AND RELATED WORKS ON TURNKEY BASIS INCLUDING DEFECT LIABILITY PERIOD OF 12 MONTHS OF RURAL PIPED WSS BER KALLA TEHSIL JAITARAN DISTT.-PALI UNDER JJM. (Rates are based on PHED BSR 2020)
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Distribution Pipe Line - Providing, lowering, laying and jointing in trenches,  standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply may be in coil or straight length in 6 M/12 M. . HDPE PE-80 PN-6 . 75 mm dia 3671 RMT
2 2 90 mm dia 4544 RMT
3 3 110 mm dia 2673 RMT
4 4 Providing, lowering, laying and jointing in trenches,  standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply of pipe shall be in straight length in 6/12 M. . HDPE PE-80 PN-6 . 125 mm dia 530 RMT
5 5 140 mm dia 75 RMT
6 6 160 mm dia 315 RMT
7 7 200 mm dia 70 RMT
8 8 225 mm dia 110 RMT
9 9 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. In all type of soil . For HDPE pipe line dia up to 110 mm 10888 RMT
10 10 For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. 920 RMT
11 11 For dia of pipe above 150 mm and up to 350 mm nominal. 495 RMT
12 12 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 226.5 Cum
13 13 Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work. 226.5 CUM
14 14 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. . Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6 80 mm dia 8 Each
15 15 100 mm dia 8 Each
16 16 125 mm dia 5 Each
17 17 150 mm dia 2 Each
18 18 200 mm dia 2 Each
19 19 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. . MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) 750 Kg
20 20 FHTC - Providing service connection as per technical specification and standard drawing as per relevant IS code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS/PVC clamp with saddle piece, gunmetal ferrule 4.0 mm (ISI make) , valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427 below ground level and P&F GI 15 mm class B (ISI mark) above ground level in the premises for fixing tap ( max. length 2.0 mtr), P&F a Bib Cock with foam flow chrome plated with complete brass body including brass handle having good quality with wt 300 to 325 gm , including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bituminous roads where minimum depth shall be 20 cm.\nFor detailed specifications of MDPE pipes please refer section "Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under:\n• The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm.\n• The raw material shall be Food grade quality \nPressure rating shall be 12.5 Bar.\n• The pipes shall bear ISO marking.\nAverage length up to 05 mtr 20 mm dia MDPE pipe and 02 mtr 15mm GI pipe class B pipe 154 Each
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail