}

Repair And Maint Of Car Parking Area For Hq 6 Sector Assam Rifles, Kashiram Basti, Dimapur-Nagaland

Assam Rifles-AR has published Repair And Maint Of Car Parking Area For Hq 6 Sector Assam Rifles. Submission Date for this Tender is 06-07-2021. Shed Construction Tenders in Kashiram Basti, Dimapur Nagaland. Bidders can get complete Tender details and download the document.




Tender Notice

28274836
Repair And Maint Of Car Parking Area For Hq 6 Sector Assam Rifles
Open Tender
Indian
Nagaland
Kashiram Basti, Dimapur
06-07-2021

Tender Details

Repair And Maint Of Car Parking Area For Hq 6 Sector Assam Rifles

Key Value

Document Fees
INR 500 /-
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Repair/maint of car parking area for HQ 6 Sect AR
Sl. No. Item Description Item Code / Make Quantity Units
1 1.01 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. item1 9 Nos
2 1.02 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level(1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) item2 0.08 Cum
3 1.03 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) item3 0.41 Cum
4 1.04 Centering and shuttering including strutting, propping etc. and removal\nof form for Columns, Pillars, Piers, Abutments, Posts and Struts item4 1.62 Sqm
5 1.05 Mild steel and Medium Tensile Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hot rolled deformed bars item5 45.4 Kg
6 1.06 Supplying and stacking at site. 90 mm to 45 mm size stone aggregateLaying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . item6 5.45 Cum
7 1.07 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) item7 4.08 Cum
8 1.08 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes item8 708.1 Kg
9 1.09 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns\nminimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape\nwherever required. item9 70.77 Sqm
10 1.1 Providing and fixing wind ties of 40x 6 mm flat iron section item10 21 RM
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail