Military Engineer Services-MES has published Repair/Maint To Certain Buildings Including Road/Path And Drain At Signal Coy And D Centrer At Manjakote. Submission Date for this Tender is 09-08-2021. Drainage Tenders in MANJAKOTE Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Jun-2021 | BOQ REVISED | BOQ | 12-07-2021 |
| 2 | 12-Jul-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 19-07-2021 |
| 3 | 13-Jul-2021 | REVISION OF DATES | Date | 09-08-2021 |
| Name of Work: REPAIR/MAINT TO CERTAIN BUILDINGS INCLUDING ROAD/PATH AND DRAIN AT SIGNAL COY AND 'D' CENTRE AT MANJAKOTE | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Approx No of Units reqd | Units | |
| 1 | 1 | PART-I (B&R Works) | |||
| 2 | 1.01 | Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced, complete all as specified. | 16 | Cubic Metre | |
| 3 | 1.02 | Taking down cement plaster/dado(Terrazo) on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed. | 70 | Square Metre | |
| 4 | 1.03 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified. | 35 | Square Metre | |
| 5 | 1.04 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each, complete all as specified. | 1 | Each | |
| 6 | 1.05 | Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified. | 3 | Each Leaf | |
| 7 | 1.06 | Taking down shutters and fixing in same opening after easing /minor repairs of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified. | 10 | Each Leaf | |
| 8 | 1.07 | Plain cement concrete ,1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified.\nNote:- The unit rate include for use of form work (straight or curved). | 30 | Square Metre | |
| 9 | 1.08 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises, complete all as specified. | 70 | Square Metre | |
| 10 | 1.09 | 100mm thick PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in path/hardstanding, surface finished even and fair, complete all as specified. | 20 | Square Metre | |
| 11 | 1.1 | Forming 20mm thick Expansion joints filled with pre-formed bituminious filler and top 30mm primed and sealed with sealing compound Grade ‘A’, thickness of concrete slab 100mm, complete all as specified & directed. | 1 | Ten Running Metre | |
| 12 | 1.11 | Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified.\nMake: Kajaria/Somany/NITCO/Johnson | 50 | Square Metre | |
| 13 | 1.12 | Vitrified tiles (Light Shade), 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified.\nMake: Kajaria/Somany/NITCO/Johnson | 20 | Square Metre | |
| 14 | 1.13 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repair , complete all as specified. | 2 | Each | |
| 15 | 1.14 | Corner Sheet glass shelves assembly consisting of 5.5mm thick sheet glass size not less then 300x300x70mm with chromium plated brackets guard and railing ,fixed in repairs complete all as specified and as approved by Engr-in Charge\n\n | 2 | Each | |
| 16 | 1.15 | 600x450mm beveled edge mirror of selected quality 5.5mm thick glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws & cup washers, fixed in repairs complete all as specified. | 5 | Each | |
| 17 | 1.16 | Stainless steel Tumbler Holder and soap Case with Toothbrush stand Fitting with screws and nails,fixed in repairs complete all as specified and as approved by Engr-in Charge\n\n | 2 | Each | |
| 18 | 1.17 | Stainless steel Folding Towel Rack,(size 18 Inch Round) with Swivel Towel Bar with towel hooks design Fitting with screws and nails,fixed in repairs complete all as specified and as approved by Engr-in Charge\n\n | 2 | Each | |
| 19 | 1.18 | PVC Soap Dispenser of capacity 250 ml Shower Lotion / Gel / liquid Shampo etc with pump, Mirror Finish Fitting with screws and nails fixed in repairs, complete all as specified and as approved by Engr-in Charge\n\n | 2 | Each | |
| 20 | 1.19 | PVC valveless syphonic action low level flushing cistern 10 ltr cap with inlet valve float & handle including PVC flush pipe, fixed in repairs, complete all as specified. \nMake: Commander/Hindware/Slimline(Parryware) | 10 | Each | |
| 21 | 1.2 | Vitreous China, wash hand basin, flat back white of size 550mmx400mm, With pedestal including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC 32mm dia waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified.\nMake: Cera/Hindware/Parryware | 4 | Each | |
| 22 | 1.21 | Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified.\nMake: Hindware/Cera/Parryware | 2 | Each | |
| 23 | 1.22 | Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of concrete bedding and making good to floors, fixed in repairs, complete all as specified.\nMake: Cera/Hindware/Parryware | 2 | Each | |
| 24 | 1.23 | Drapery rod dia 20mm with funnels,side brackets & end caps for each curtain rod etc, fixed in repair complete all as specified | 20 | Running Metre | |
| 25 | 1.24 | Bib tap long body 15mm bore, fancy type, chromium plated , cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule,fixed in repairs, complete all as specified and directed. \nMake: Cera/Parko/Ess Ess/Jainko | 10 | Each | |
| 26 | 1.25 | Angle Stop valves, 15mm bore, fancy type, chromium plated , screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc.suitable for shower rose as here-in-before, fixed in repair, complete all as specifed. \nMake: Cera/Parko/Ess Ess | 6 | Each | |
| 27 | 1.26 | Pillar cock fancy type long neck cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed\nshanks and fly-nuts,screwed for iron pipe 15mm dia bore and fixed complete all as specified.\nMake:Cera/Parko/Ess Ess/Jainko | 5 | Each | |
| 28 | 1.27 | Brass chromium plated mixer for mixing hot & cold water, single hole, bore of pipe 15mm for WHB/ Kitchen/wall fittings complete all as specified & directed.\nMake:Cera/Parko/Ess Ess/Jainko | 2 | Each | |
| 29 | 1.28 | Brass chromium plated shower rose of 125mm size with or without swivel joints, complete all as specified\nMake:Cera/Parko/Ess Ess | 2 | Each | |
| 30 | 1.29 | Brass Chromium Plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repair, complete all as specified. | 5 | Each | |
| 31 | 1.3 | Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe 20mm bore (Minimum weight 20mm-210gms)and fixed in repairs, complete all as specified.\nMake: Prayag/Polytuff/Supreme\n | 5 | Each | |
| 32 | 1.31 | PVC fibre glass Cabinet of size 510x490x100mm with looking mirror 1/2 openable door ,fixed in repairs complete all as specified and approved by Engr-in Charge\n\n | 2 | Each | |
| 33 | 1.32 | Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 500 ltrs, fixed in repair, complete all as specified.\nMake: Sintex/Diplast/Rotex/Lotus | 2 | Each | |
| 34 | 1.33 | PVC connection 15mm size with Brass couplings nuts of length 450mm (ISI Marked), fixed in repairs, complete all as specified. | 13 | Each | |
| 35 | 1.34 | Brass Chromium Plated, Hand Shower (Health Faucet) (ABS Body) with 1.5 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook, fixed in repair, complete all as specified. | 2 | Each | |
| 36 | 1.35 | Plastic water closet seat cover,for pedestal pan white, closed pattern with flat bottom, and mild steel chromium plated or aluminium hinging device, fixed in repairs, complete all as specified.\nMake: Commander/Hindware/Parryware | 2 | Each | |
| 37 | 1.36 | 75mm thick PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in sub base of floor/paving, surface finished even and fair, complete all as specified. | 130 | Square Metre | |
| 38 | 1.37 | Prepolished Chequerred cement concrete coloured tiles 300X300X 25mm thick glossy finish set and jointed in neat cement slurry with grey cement and pigments to match the colours of tills laid over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified.\nMake :- Ajanta/ Sagar or equivalent make as approved by AGE(I). | 60 | Square Metre | |
| 39 | 1.38 | Sand filling under floors or in foundations (50mm thick) including watering and consolidation, complete all as specified. | 3.5 | Cubic Metre | |
| 40 | 1.39 | Machine pressed coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including joint filling with grey cement and pigment to match the shade of tile, complete all as specified. | 70 | Square Metre | |
| 41 | 1.4 | PCC 1:3:6, type C1, using 20mm graded crushed stone aggregate as in surface channel and drains, complete all as specified & directed. | 5.5 | Cubic Metre | |
| 42 | 1.41 | Extra for forming fair finished drain or channel of any inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified. | 25 | Running Metre | |
| 43 | 1.42 | 15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified. | 50 | Square Metre | |
| 44 | 1.43 | 10mm thick plastering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified. | 20 | Square Metre | |
| 45 | 1.44 | 0.63 mm thick galvanised corrugated Mild steel sheeting with two corrugation side lap fixed with 'J' type or 'L' type hook & washer in roof, walls etc. with grade of zinc coating 275, complete all as specified.\nMake: Sail/Tata/JSW Steel | 30 | Square Metre | |
| 46 | 1.45 | 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified. \n Make: Sail/Tata/JSW Steel | 5 | Square Metre | |
| 47 | 1.46 | 6mm dia powder coated aluminimum decco grill, minimum thickness of powder coating 50micron), section No 104, 100mm aperture of hexoconal design and pattern as approved, fixed in repair complete all as specified and directed.\nMake of Aluminium section : Hindalco/Balco/Jindal. \n | 10 | Square Metre | |
| 48 | 1.47 | Dismantling wall & ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified. | 150 | Square Metre | |
| 49 | 1.48 | 10mm thick Insulated PVC Wall lining consisting of PVC Insulated Panels having Expanded Polystyrene (EPS) stuck to 2mm Thick plain colour PVC Sheet duly fitted into the wall complete all as specified. | 50 | Square Metre | |
| 50 | 1.49 | 8mm Thick PVC insulation panels with EPS stuck to 1mm plain PVC Sheet suitable placed in false ceiling grid made of Aluminium / G.I / M.S complete all as specified. | 20 | Square Metre | |
| 51 | 1.5 | E-board of size 600 x 600x4mm thick white pre-laimnated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maxiumum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200 mm long cross tee (with double stitching) to be interlocked between main runners at 600mm to be supoorted independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, Permimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 3000 long of white colour all as per manufacturer instructions, complete all as specified and as directed. \nMake: Everest/Anchor/Gypboard | 80 | Square Metre | |
| 52 | 1.51 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified. | 15 | Running Metre | |
| 53 | 1.52 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat oulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified. | 5 | Square Metre | |
| 54 | 1.53 | Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane,fixed in repairs on steel windows complete all as specified. | 5 | Square Metre | |
| 55 | 1.54 | Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed. In repair, complete all as specified.\nMake: Universal/Everest/Amar/Godrej | 1 | Each | |
| 56 | 1.55 | Extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified. | 6 | Each | |
| 57 | 1.56 | Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified. | 6 | Each | |
| 58 | 1.57 | Prepration of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, (Plain/camouflage pattern) complete all as specified | 135 | Square Metre | |
| 59 | 1.58 | Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint over one coat of primer complete all as specified. | 50 | Square Metre | |
| 60 | 1.59 | Prepration of new plastered surfaces of wall over 10cm width or girth and applying two coats of oil bound distemper over one coat of Birla wall putty with primer, complete all as specified. | 10 | Square Metre | |
| 61 | 1.6 | Preperation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified. | 10 | Square Metre | |
| 62 | 2 | PART-II (E&M Works) | |||
| 63 | 2.01 | Taking down carefully copper/aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc., removing old/UNSV material from site and making good the old disturbed surface, complete all as directed. | 80 | Per Point | |
| 64 | 2.02 | Point wiring complete with 1.5 Sqmm single core multi stranded copper conductor (FRLS) cable PVC insulated unsheathed cable 1100 volt grade conforming to IS-694 enclosed and including PVC rigid non metallic 25mm PVC casing capping (double lock) with fittings and accessories fixed to walls/ceiling by means of PVC rowl plugs fasteners with cadmium plated screws all as per IS including hard wood board and 3mm thick laminated sheet top covers including 1 Sqmm copper PVC insulated unsheathed continuous earth wire and connected to common earth dolly for One light/fan/5 Amp socket independent/bell controlled by one, one way switch.\nMake of cable: Finolex/Havells/Polycab\nMake of Casing Capping : Modi/Plaza/Polycab\n | 50 | Per Point | |
| 65 | 2.03 | All as per Srl item No 2.02 above but for one 3 pin 5 Amp socket out let on the independent board with other switches. | 10 | Per Point | |
| 66 | 2.04 | All as per Srl item No 2.02 above but for one 3 pin 5 Amp socket out let on the same board with other switches. | 10 | Per Point | |
| 67 | 2.05 | All as per Srl item No 2.02 above but with 2.5 Sqmm single core multi stranded copper conductor (FRLS) cable for 3 pin 15 Amps socket outlet on independent board, including 1.5 Sqmm PVC insulated unsheathed continuous earth wire and connecting to common earth dolly.\nMake of cable: Finolex/Havells/Polycab\nMake of Casing Capping : Modi/Plaza/Polycab | 10 | Per Point | |
| 68 | 2.06 | Switch, piano, type 230/250 volts grade, single pole, one way, 5/6 Amps , complete all as directed.\nMake: Havells/Cona/SSK\n | 50 | Each | |
| 69 | 2.07 | Switch Socket combination of 2 in 1, 3 pin 5 Amp flush type universal complete all as directed..\nMake: Havells/Cona/SSK\n | 20 | Each | |
| 70 | 2.08 | Switch socket combination of 2 in 1, 5 pin 5 and 15 Amps flush type universal complete all as directed..\nMake: Havells/Cona/SSK\n | 10 | Each | |
| 71 | 2.09 | LED TRIM PANEL LIGHT SQUARE 20 W 6500 K, Slim polycarbonate panel light luminaire for grid ceiling complete with separate electronic driver and connecting up with three core copper conductor cable of suitable size including taking down old.\nMake : Havells Cat Part No LHEBLDP7IN1W020 or equivalent of Crompton Greaves/Philips/polycab.\n | 20 | Each | |
| 72 | 2.1 | Slim Fit low profile LED downlighter , to deliver superior light output ,12W 5700K , Lumens Efficiency 140 Lumens/Watt, suitable for ceiling cutout 160mm dia height 40mm including connecting up with thre core twisted flexible copper conductor cable of suitable size including taking down old.\nMake: Havells Cat Part No. EDGEPRORDDLR12WLED857S eqivalent in Philips/Crompton/Wipro\n | 30 | Each | |
| 73 | 2.11 | Decorative Slim Linear LED Batten, 20W 6500K (1.15 m (1150 mm)), Polycarbonate Body, Lumens Efficiency 100 Lumens/Watt l mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete including connecting up with thre core twisted flexible copper conductor cable of suitable size including taking down old.\nMake: Havells Cat Part No. LHEXACP7IN1W02020 or eqivalent in Philips/Crompton/Wipro\n | 40 | Each | |
| 74 | 3 | PART-III (Schedule of Credit)\nAmount of credit of Rs. 11195.00 for retrieved material mentioned in Sch `A' Part-III of tender documents in PDF form which will be deducted offline during acceptance of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
