Forest Department-FD has published Construction Of Model Forest Station And Dormitory At Rajampara Forest Station In Ranni Range During 2021 22. Submission Date for this Tender is 05-07-2021. Civil Work Tenders in Ranni Kerala. Bidders can get complete Tender details and download the document.
CONSTRUCTION OF MODEL FOREST STATION AND DORMITORY AT RAJAMPARA IN RANNI RANGE DURING2021-22 | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 0 | Appendix-A- strengthening of Forest stataion | BI01010001010000000000000515BI0100001113 | ||
2 | 1 | 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001114 | 169.578 | cum |
3 | 2 | 7.1.1\n Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:\n Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001115 | 50.721 | cum |
4 | 3 | 4.1.8\nProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001116 | 28.437 | cum |
5 | 4 | 50.6.1.4\nSolid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | BI01010001010000000000000515BI0100001117 | 59.7 | cum |
6 | 5 | 50.9.1.1\nProviding wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | BI01010001010000000000000515BI0100001118 | 1.012 | cum |
7 | 6 | 5.9.2\n Centering and shuttering including strutting, etc. and removal of form for:\n Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001119 | 338.379 | sqm |
8 | 7 | 13.7.1\n12 mm cement plaster finished with a floating coat of neat cement of mix:\n 1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001120 | 245.902 | sqm |
9 | 8 | 13.7.2\n12 mm cement plaster finished with a floating coat of neat cement of mix:\n 1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001121 | 728.346 | sqm |
10 | 9 | 5.22.2\n Steel Rft for R C C work including straightening, cutting ,bending,placing in position and binding all complete up to plinth level . Hard drawn steel wire | BI01010001010000000000000515BI0100001122 | 2775.9 | kg |
11 | 10 | 5.3\nReinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001123 | 37.012 | cum |
12 | 11 | 11.36\nProviding and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001124 | 37.66 | sqm |
13 | 12 | 11.37\nProviding and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001125 | 9.08 | sqm |
14 | 13 | 11.41.2\n Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.\n Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001126 | 193.75 | sqm |
15 | 14 | 10.16.2\n Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes | BI01010001010000000000000515BI0100001127 | 200 | kg |
16 | 15 | 13.37.1\n White washing with lime to give an even shade:\n New work (three or more coats) | BI01010001010000000000000515BI0100001128 | 974.24 | sqm |
17 | 16 | 50.9.2.1\nProviding and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001129 | 15 | sqm |
18 | 17 | 50.9.3.1\nProviding and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001130 | 21.285 | sqm |
19 | 18 | 13.83.2\nWall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats | BI01010001010000000000000515BI0100001131 | 974.24 | sqm |
20 | 19 | 13.84.2\nPainting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour..Two coats | BI01010001010000000000000515BI0100001132 | 103.498 | sqm |
21 | 20 | od92701/202_2021\n Hard drawn steel steel wire fabric for animal rescue | BI01010001010000000000000515BI0100001133 | 14.19 | sqm |
22 | 21 | 50.9.11.2\nProviding and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001134 | 28.351 | sqm |
23 | 22 | 50.9.11.1\nProviding and fixing Thomson Multi wood board or equivalent make paneling 12 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001135 | 14.112 | sqm |
24 | 23 | 9.120.1\nProviding and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters | BI01010001010000000000000515BI0100001136 | 1.576 | sqm |
25 | 24 | 17.2.1\n Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:\n W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001137 | 3 | Nos |
26 | 25 | 17.7.6 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\n17.7.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001138 | 3 | Nos |
27 | 26 | 17.28.1.1\n Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.\n Semi rigid pipe 32 mm dia | BI01010001010000000000000515BI0100001139 | 2 | Nos |
28 | 27 | 17.32.2\n Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :\n Rectangular shape 453x357 mm | BI01010001010000000000000515BI0100001140 | 4 | Nos |
29 | 28 | 18.17.2\nProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n 32 mm nominal bore | BI01010001010000000000000515BI0100001141 | 1 | Nos |
30 | 29 | 18.50.1\n Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.\n 15 mm nominal bore | BI01010001010000000000000515BI0100001142 | 6 | nos |
31 | 30 | 18.52.1\n Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore\n | BI01010001010000000000000515BI0100001143 | 8 | nos |
32 | 31 | 18.65\nProviding and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms. | BI01010001010000000000000515BI0100001144 | 5 | Nos |
33 | 32 | 18.48\nProviding and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | BI01010001010000000000000515BI0100001145 | 1000 | ltr |
34 | 33 | 50.17.1.3\n Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001146 | 5 | nos |
35 | 34 | 50.17.1.5\nSupplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001147 | 3 | Nos |
36 | 35 | 50.18.7.3.2\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | BI01010001010000000000000515BI0100001148 | 14 | nos |
37 | 36 | 50.18.7.4.1\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall | BI01010001010000000000000515BI0100001149 | 10 | m |
38 | 37 | 50.18.8.7.1\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2 | BI01010001010000000000000515BI0100001150 | 30 | m |
39 | 38 | 50.18.8.9.1\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 | BI01010001010000000000000515BI0100001151 | 20 | m |
40 | 39 | Appendix-B: Dormitory: 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001152 | 209.134 | cum |
41 | 40 | 7.1.1\nRandom rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:\n Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001153 | 57.904 | cum |
42 | 41 | 4.1.8\nProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001154 | 25.077 | cum |
43 | 42 | 6.3.2\nBrick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks | BI01010001010000000000000515BI0100001155 | 57.592 | cum |
44 | 43 | 50.6.2.2\nSolid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001156 | 4.068 | cum |
45 | 44 | 5.9.2\nCentering and shuttering including strutting, etc. and removal of form for:\n Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001157 | 258.93 | sqm |
46 | 45 | 5.22.2\nSteel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level\nHard drawn steel wire | BI01010001010000000000000515BI0100001158 | 3057.6 | kg |
47 | 46 | 5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.\n5.33.2 All work above plinth level upto floor V level | BI01010001010000000000000515BI0100001159 | 38.222 | cum |
48 | 47 | 13.7.1\n 12 mm cement plaster finished with a floating coat of neat cement of mix:\n 1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001160 | 114.727 | sqm |
49 | 48 | 13.2.2\n15 mm cement plaster on the rough side of single or half brick wall of mix:\n 1:6 ( 1 cement : 6 fine sand) | BI01010001010000000000000515BI0100001161 | 757.96 | sqm |
50 | 49 | 10.16.2\nSteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\n Hot finished seamless type tubes | BI01010001010000000000000515BI0100001162 | 100 | kg |
51 | 50 | 11.36\nProviding and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001163 | 57.602 | sqm |
52 | 51 | 11.37\nProviding and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001164 | 12.151 | sqm |
53 | 52 | 11.41.2\nProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001165 | 126.165 | sqm |
54 | 53 | 8.12\nProviding and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvillinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | BI01010001010000000000000515BI0100001166 | 3.78 | sqm |
55 | 54 | 50.9.2.1\nProviding and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge.using Anjili/ Jack wood | BI01010001010000000000000515BI0100001167 | 12.3 | sqm |
56 | 55 | 50.9.3.1\nProviding and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001168 | 18.72 | sqm |
57 | 56 | 9.120.2\n Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.\n9.120.2 30 mm thick pre laminated PVC door shutters | BI01010001010000000000000515BI0100001169 | 9 | sqm |
58 | 57 | 13.37.1\n White washing with lime to give an even shade:\n New work (three or more coats) | BI01010001010000000000000515BI0100001170 | 902.68 | sqm |
59 | 58 | 13.82.2\nWall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.\n Two coats | BI01010001010000000000000515BI0100001171 | 902.68 | kg |
60 | 59 | 13.84.2\nPainting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats | BI01010001010000000000000515BI0100001172 | 75.499 | sqm |
61 | 60 | 17.2.2\nProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:\n17.2.2 W.C. pan with ISI marked black solid plastic seat and lid | BI01010001010000000000000515BI0100001173 | 6 | Nos |
62 | 61 | 17.7.6\n Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\n White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001174 | 2 | Nos |
63 | 62 | 17.10.2.1\n Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board.610x510 mm bowl depth 200 mm | BI01010001010000000000000515BI0100001175 | 1 | nos |
64 | 63 | 17.28.1.1\nProviding and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.\nsemi rigid pipe.32 mm dia | BI01010001010000000000000515BI0100001176 | 3 | Nos |
65 | 64 | 17.29\nProviding and fixing 100 mm sand cast Iron grating for gully trap. | BI01010001010000000000000515BI0100001177 | 6 | Nos |
66 | 65 | 17.30\nProviding and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. | BI01010001010000000000000515BI0100001178 | 1 | Nos |
67 | 66 | 17.32.2\nProviding and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :\nRectangular shape 453x357 mm | BI01010001010000000000000515BI0100001179 | 2 | nos |
68 | 67 | 18.7.3\nProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall.25 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001180 | 15 | m |
69 | 68 | 18.16.2\n Providing and fixing brass stop cock of approved quality :\n 20 mm nominal bore | BI01010001010000000000000515BI0100001181 | 18 | Nos |
70 | 69 | 18.17.2\n Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n 32 mm nominal bore | BI01010001010000000000000515BI0100001182 | 1 | Nos |
71 | 70 | 18.51.1\nProviding and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.\n 15 mm nominal bore | BI01010001010000000000000515BI0100001183 | 8 | Nos |
72 | 71 | 50.17.1.1\nSupplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001184 | 7 | Nos |
73 | 72 | 50.17.1.3\n Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge | BI01010001010000000000000515BI0100001185 | 6 | Nos |
74 | 73 | 50.17.1.5\n Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001186 | 6 | Nos |
75 | 74 | 50.18.7.3.2\n Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | BI01010001010000000000000515BI0100001187 | 40 | m |
76 | 75 | 50.18.7.4.2\n Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall | BI01010001010000000000000515BI0100001188 | 10 | nm |
77 | 76 | 50.18.8.7.2\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | BI01010001010000000000000515BI0100001189 | 35 | m |
78 | 77 | 50.18.8.9.1\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 | BI01010001010000000000000515BI0100001190 | 30 | m |
79 | 78 | First Floor- 4:1:8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:\n1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001191 | 1.216 | cum |
80 | 79 | 50.6.1.6\nSolid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level thickness 20cm and above in : CM 1:6 ( 1 cement : 6 coarse sand sand) etc complete | BI01010001010000000000000515BI0100001192 | 20.237 | cum |
81 | 80 | 50.6.3.2\n Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | BI01010001010000000000000515BI0100001193 | 2.838 | cum |
82 | 81 | 50.9.1.1\nProviding wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | BI01010001010000000000000515BI0100001194 | 0.811 | cum |
83 | 82 | 5.9.2\nCentering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001195 | 215.851 | sqm |
84 | 83 | 5.9.6\nCentering and shuttering including strutting, etc. and removal of form for:\n Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001196 | 12.164 | sqm |
85 | 84 | 5.22.2\nSteel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level\n Hard drawn steel wire | BI01010001010000000000000515BI0100001197 | 2590.4 | kg |
86 | 85 | 5.33.2\nProviding and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level | BI01010001010000000000000515BI0100001198 | 32.382 | cum |
87 | 86 | 13.7.1\n12 mm cement plaster finished with a floating coat of neat cement of mix:\n 1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001199 | 112.701 | sqm |
88 | 87 | 13.2.2\n 15 mm cement plaster on the rough side of single or half brick wall of mix:\n 1:6 ( 1 cement : 6 fine sand) | BI01010001010000000000000515BI0100001200 | 884.599 | sqm |
89 | 88 | 10.16.2\nSteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.\n Hot finished seamless type tubes | BI01010001010000000000000515BI0100001201 | 395 | kg |
90 | 89 | 11.36\n Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001202 | 57.602 | sqm |
91 | 90 | 11.37\n Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001203 | 12.151 | sqm |
92 | 91 | 11.41.2\nProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm | BI01010001010000000000000515BI0100001204 | 106.58 | sqm |
93 | 92 | 50.9.2.1\nProviding and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge.using Anjili/ Jack wood | BI01010001010000000000000515BI0100001205 | 10.8 | sqm |
94 | 93 | 50.9.3.1\n Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001206 | 19.238 | sqm |
95 | 94 | 9.120.2\nProviding and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick pre laminated PVC door shutters | BI01010001010000000000000515BI0100001207 | 9 | sqm |
96 | 95 | 13.37.1\nWhite washing with lime to give an even shade:\n New work (three or more coats) | BI01010001010000000000000515BI0100001208 | 997.29 | sqm |
97 | 96 | 13.82.2\nWall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.\n Two coats | BI01010001010000000000000515BI0100001209 | 997.29 | sqm |
98 | 97 | 13.84.2\nPainting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.\n Two coats | BI01010001010000000000000515BI0100001210 | 73.455 | sqm |
99 | 98 | 17.2.2\nProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid | BI01010001010000000000000515BI0100001211 | 6 | Nos |
100 | 99 | 17.7.6\nProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:\n White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001212 | 2 | Nos |
101 | 100 | 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.\n Semi rigid pipe. 32 mm dia\n | BI01010001010000000000000515BI0100001213 | 3 | Nos |
102 | 101 | 17.29\n Providing and fixing 100 mm sand cast Iron grating for gully trap. | BI01010001010000000000000515BI0100001214 | 6 | Nos |
103 | 102 | 17.32.2\nProviding and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :\n Rectangular shape 453x357 mm | BI01010001010000000000000515BI0100001215 | 2 | Nos |
104 | 103 | 18.7.3\nProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall\n 25 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001216 | 15 | m |
105 | 104 | 18.16.2\nProviding and fixing brass stop cock of approved quality :\n 20 mm nominal bore | BI01010001010000000000000515BI0100001217 | 18 | Nos |
106 | 105 | 18.17.2\nProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :\n 32 mm nominal bore | BI01010001010000000000000515BI0100001218 | 1 | Nos |
107 | 106 | 18.51.1\n Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.\n 15 mm nominal bore | BI01010001010000000000000515BI0100001219 | 8 | Nos |
108 | 107 | 50.17.1.1\n Supplying and fixing Stainless steel soap dish including cost of matarials and labour charges etc complete as per the direction of Engineer in chargre | BI01010001010000000000000515BI0100001220 | 7 | nos |
109 | 108 | 50.17.1.3\nSupplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001221 | 6 | Nos |
110 | 109 | 50.17.1.5\n Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001222 | 6 | Nos |
111 | 110 | 50.18.7.3.2\n Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | BI01010001010000000000000515BI0100001223 | 40 | m |
112 | 111 | 50.18.7.4.2\nProviding and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall | BI01010001010000000000000515BI0100001224 | 12 | m |
113 | 112 | 50.18.8.7.2\n Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 | BI01010001010000000000000515BI0100001243 | 35 | m |
114 | 113 | 50.18.8.9.1\nProviding and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 | BI01010001010000000000000515BI0100001244 | 30 | m |
115 | 114 | 18.48\nProviding and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.. | BI01010001010000000000000515BI0100001245 | 2000 | ltr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail